1# SPDX-License-Identifier: GPL-2.0-only 2# 3# Appletalk driver configuration 4# 5config ATALK 6 tristate "Appletalk protocol support" 7 select LLC 8 help 9 AppleTalk is the protocol that Apple computers can use to communicate 10 on a network. If your Linux box is connected to such a network and you 11 wish to connect to it, say Y. You will need to use the netatalk package 12 so that your Linux box can act as a print and file server for Macs as 13 well as access AppleTalk printers. Check out 14 <http://www.zettabyte.net/netatalk/> on the WWW for details. 15 EtherTalk is the name used for AppleTalk over Ethernet and the 16 cheaper and slower LocalTalk is AppleTalk over a proprietary Apple 17 network using serial links. EtherTalk and LocalTalk are fully 18 supported by Linux. 19 20 General information about how to connect Linux, Windows machines and 21 Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>. The 22 NET3-4-HOWTO, available from 23 <http://www.tldp.org/docs.html#howto>, contains valuable 24 information as well. 25 26 To compile this driver as a module, choose M here: the module will be 27 called appletalk. You almost certainly want to compile it as a 28 module so you can restart your AppleTalk stack without rebooting 29 your machine. I hear that the GNU boycott of Apple is over, so 30 even politically correct people are allowed to say Y here. 31 32config DEV_APPLETALK 33 tristate "Appletalk interfaces support" 34 depends on ATALK 35 help 36 AppleTalk is the protocol that Apple computers can use to communicate 37 on a network. If your Linux box is connected to such a network, and wish 38 to do IP over it, or you have a LocalTalk card and wish to use it to 39 connect to the AppleTalk network, say Y. 40 41 42config LTPC 43 tristate "Apple/Farallon LocalTalk PC support" 44 depends on DEV_APPLETALK && (ISA || EISA) && ISA_DMA_API && VIRT_TO_BUS 45 help 46 This allows you to use the AppleTalk PC card to connect to LocalTalk 47 networks. The card is also known as the Farallon PhoneNet PC card. 48 If you are in doubt, this card is the one with the 65C02 chip on it. 49 You also need version 1.3.3 or later of the netatalk package. 50 This driver is experimental, which means that it may not work. 51 See the file <file:Documentation/networking/ltpc.rst>. 52 53config COPS 54 tristate "COPS LocalTalk PC support" 55 depends on DEV_APPLETALK && (ISA || EISA) 56 help 57 This allows you to use COPS AppleTalk cards to connect to LocalTalk 58 networks. You also need version 1.3.3 or later of the netatalk 59 package. This driver is experimental, which means that it may not 60 work. This driver will only work if you choose "AppleTalk DDP" 61 networking support, above. 62 Please read the file <file:Documentation/networking/cops.rst>. 63 64config COPS_DAYNA 65 bool "Dayna firmware support" 66 depends on COPS 67 help 68 Support COPS compatible cards with Dayna style firmware (Dayna 69 DL2000/ Daynatalk/PC (half length), COPS LT-95, Farallon PhoneNET PC 70 III, Farallon PhoneNET PC II). 71 72config COPS_TANGENT 73 bool "Tangent firmware support" 74 depends on COPS 75 help 76 Support COPS compatible cards with Tangent style firmware (Tangent 77 ATB_II, Novell NL-1000, Daystar Digital LT-200. 78 79config IPDDP 80 tristate "Appletalk-IP driver support" 81 depends on DEV_APPLETALK && ATALK 82 help 83 This allows IP networking for users who only have AppleTalk 84 networking available. This feature is experimental. With this 85 driver, you can encapsulate IP inside AppleTalk (e.g. if your Linux 86 box is stuck on an AppleTalk only network) or decapsulate (e.g. if 87 you want your Linux box to act as an Internet gateway for a zoo of 88 AppleTalk connected Macs). Please see the file 89 <file:Documentation/networking/ipddp.rst> for more information. 90 91 If you say Y here, the AppleTalk-IP support will be compiled into 92 the kernel. In this case, you can either use encapsulation or 93 decapsulation, but not both. With the following two questions, you 94 decide which one you want. 95 96 To compile the AppleTalk-IP support as a module, choose M here: the 97 module will be called ipddp. 98 In this case, you will be able to use both encapsulation and 99 decapsulation simultaneously, by loading two copies of the module 100 and specifying different values for the module option ipddp_mode. 101 102config IPDDP_ENCAP 103 bool "IP to Appletalk-IP Encapsulation support" 104 depends on IPDDP 105 help 106 If you say Y here, the AppleTalk-IP code will be able to encapsulate 107 IP packets inside AppleTalk frames; this is useful if your Linux box 108 is stuck on an AppleTalk network (which hopefully contains a 109 decapsulator somewhere). Please see 110 <file:Documentation/networking/ipddp.rst> for more information. 111