1 /* 2 * INET An implementation of the TCP/IP protocol suite for the LINUX 3 * operating system. INET is implemented using the BSD Socket 4 * interface as the means of communication with the user level. 5 * 6 * Holds initial configuration information for devices. 7 * 8 * Version: @(#)Space.c 1.0.7 08/12/93 9 * 10 * Authors: Ross Biro 11 * Fred N. van Kempen, <waltje@uWalt.NL.Mugnet.ORG> 12 * Donald J. Becker, <becker@scyld.com> 13 * 14 * Changelog: 15 * Stephen Hemminger (09/2003) 16 * - get rid of pre-linked dev list, dynamic device allocation 17 * Paul Gortmaker (03/2002) 18 * - struct init cleanup, enable multiple ISA autoprobes. 19 * Arnaldo Carvalho de Melo <acme@conectiva.com.br> - 09/1999 20 * - fix sbni: s/device/net_device/ 21 * Paul Gortmaker (06/98): 22 * - sort probes in a sane way, make sure all (safe) probes 23 * get run once & failed autoprobes don't autoprobe again. 24 * 25 * This program is free software; you can redistribute it and/or 26 * modify it under the terms of the GNU General Public License 27 * as published by the Free Software Foundation; either version 28 * 2 of the License, or (at your option) any later version. 29 */ 30 #include <linux/netdevice.h> 31 #include <linux/etherdevice.h> 32 #include <linux/errno.h> 33 #include <linux/init.h> 34 #include <linux/netlink.h> 35 #include <net/Space.h> 36 37 /* A unified ethernet device probe. This is the easiest way to have every 38 * ethernet adaptor have the name "eth[0123...]". 39 */ 40 41 struct devprobe2 { 42 struct net_device *(*probe)(int unit); 43 int status; /* non-zero if autoprobe has failed */ 44 }; 45 46 static int __init probe_list2(int unit, struct devprobe2 *p, int autoprobe) 47 { 48 struct net_device *dev; 49 50 for (; p->probe; p++) { 51 if (autoprobe && p->status) 52 continue; 53 dev = p->probe(unit); 54 if (!IS_ERR(dev)) 55 return 0; 56 if (autoprobe) 57 p->status = PTR_ERR(dev); 58 } 59 return -ENODEV; 60 } 61 62 /* ISA probes that touch addresses < 0x400 (including those that also 63 * look for EISA/PCI cards in addition to ISA cards). 64 */ 65 static struct devprobe2 isa_probes[] __initdata = { 66 #if defined(CONFIG_HP100) && defined(CONFIG_ISA) /* ISA, EISA */ 67 {hp100_probe, 0}, 68 #endif 69 #ifdef CONFIG_3C515 70 {tc515_probe, 0}, 71 #endif 72 #ifdef CONFIG_ULTRA 73 {ultra_probe, 0}, 74 #endif 75 #ifdef CONFIG_WD80x3 76 {wd_probe, 0}, 77 #endif 78 #if defined(CONFIG_NE2000) /* ISA (use ne2k-pci for PCI cards) */ 79 {ne_probe, 0}, 80 #endif 81 #ifdef CONFIG_LANCE /* ISA/VLB (use pcnet32 for PCI cards) */ 82 {lance_probe, 0}, 83 #endif 84 #ifdef CONFIG_SMC9194 85 {smc_init, 0}, 86 #endif 87 #ifdef CONFIG_CS89x0 88 #ifndef CONFIG_CS89x0_PLATFORM 89 {cs89x0_probe, 0}, 90 #endif 91 #endif 92 #if defined(CONFIG_MVME16x_NET) || defined(CONFIG_BVME6000_NET) /* Intel */ 93 {i82596_probe, 0}, /* I82596 */ 94 #endif 95 #ifdef CONFIG_NI65 96 {ni65_probe, 0}, 97 #endif 98 {NULL, 0}, 99 }; 100 101 static struct devprobe2 m68k_probes[] __initdata = { 102 #ifdef CONFIG_ATARILANCE /* Lance-based Atari ethernet boards */ 103 {atarilance_probe, 0}, 104 #endif 105 #ifdef CONFIG_SUN3LANCE /* sun3 onboard Lance chip */ 106 {sun3lance_probe, 0}, 107 #endif 108 #ifdef CONFIG_SUN3_82586 /* sun3 onboard Intel 82586 chip */ 109 {sun3_82586_probe, 0}, 110 #endif 111 #ifdef CONFIG_APNE /* A1200 PCMCIA NE2000 */ 112 {apne_probe, 0}, 113 #endif 114 #ifdef CONFIG_MVME147_NET /* MVME147 internal Ethernet */ 115 {mvme147lance_probe, 0}, 116 #endif 117 #ifdef CONFIG_MAC8390 /* NuBus NS8390-based cards */ 118 {mac8390_probe, 0}, 119 #endif 120 #ifdef CONFIG_MAC89x0 121 {mac89x0_probe, 0}, 122 #endif 123 {NULL, 0}, 124 }; 125 126 /* Unified ethernet device probe, segmented per architecture and 127 * per bus interface. This drives the legacy devices only for now. 128 */ 129 130 static void __init ethif_probe2(int unit) 131 { 132 unsigned long base_addr = netdev_boot_base("eth", unit); 133 134 if (base_addr == 1) 135 return; 136 137 (void)(probe_list2(unit, m68k_probes, base_addr == 0) && 138 probe_list2(unit, isa_probes, base_addr == 0)); 139 } 140 141 /* Statically configured drivers -- order matters here. */ 142 static int __init net_olddevs_init(void) 143 { 144 int num; 145 146 #ifdef CONFIG_SBNI 147 for (num = 0; num < 8; ++num) 148 sbni_probe(num); 149 #endif 150 for (num = 0; num < 8; ++num) 151 ethif_probe2(num); 152 153 #ifdef CONFIG_COPS 154 cops_probe(0); 155 cops_probe(1); 156 cops_probe(2); 157 #endif 158 #ifdef CONFIG_LTPC 159 ltpc_probe(); 160 #endif 161 162 return 0; 163 } 164 165 device_initcall(net_olddevs_init); 166