1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (C) 2005, Intec Automation Inc. 4 * Copyright (C) 2014, Freescale Semiconductor, Inc. 5 */ 6 7 #include <linux/mtd/spi-nor.h> 8 9 #include "core.h" 10 11 #define XILINX_OP_SE 0x50 /* Sector erase */ 12 #define XILINX_OP_PP 0x82 /* Page program */ 13 #define XILINX_OP_RDSR 0xd7 /* Read status register */ 14 15 #define XSR_PAGESIZE BIT(0) /* Page size in Po2 or Linear */ 16 #define XSR_RDY BIT(7) /* Ready */ 17 18 #define XILINX_RDSR_OP(buf) \ 19 SPI_MEM_OP(SPI_MEM_OP_CMD(XILINX_OP_RDSR, 0), \ 20 SPI_MEM_OP_NO_ADDR, \ 21 SPI_MEM_OP_NO_DUMMY, \ 22 SPI_MEM_OP_DATA_IN(1, buf, 0)) 23 24 #define S3AN_INFO(_jedec_id, _n_sectors, _page_size) \ 25 .id = { \ 26 ((_jedec_id) >> 16) & 0xff, \ 27 ((_jedec_id) >> 8) & 0xff, \ 28 (_jedec_id) & 0xff \ 29 }, \ 30 .id_len = 3, \ 31 .sector_size = (8 * (_page_size)), \ 32 .n_sectors = (_n_sectors), \ 33 .page_size = (_page_size), \ 34 .n_banks = 1, \ 35 .addr_nbytes = 3, \ 36 .flags = SPI_NOR_NO_FR 37 38 /* Xilinx S3AN share MFR with Atmel SPI NOR */ 39 static const struct flash_info xilinx_nor_parts[] = { 40 /* Xilinx S3AN Internal Flash */ 41 { "3S50AN", S3AN_INFO(0x1f2200, 64, 264) }, 42 { "3S200AN", S3AN_INFO(0x1f2400, 256, 264) }, 43 { "3S400AN", S3AN_INFO(0x1f2400, 256, 264) }, 44 { "3S700AN", S3AN_INFO(0x1f2500, 512, 264) }, 45 { "3S1400AN", S3AN_INFO(0x1f2600, 512, 528) }, 46 }; 47 48 /* 49 * This code converts an address to the Default Address Mode, that has non 50 * power of two page sizes. We must support this mode because it is the default 51 * mode supported by Xilinx tools, it can access the whole flash area and 52 * changing over to the Power-of-two mode is irreversible and corrupts the 53 * original data. 54 * Addr can safely be unsigned int, the biggest S3AN device is smaller than 55 * 4 MiB. 56 */ 57 static u32 s3an_nor_convert_addr(struct spi_nor *nor, u32 addr) 58 { 59 u32 page_size = nor->params->page_size; 60 u32 offset, page; 61 62 offset = addr % page_size; 63 page = addr / page_size; 64 page <<= (page_size > 512) ? 10 : 9; 65 66 return page | offset; 67 } 68 69 /** 70 * xilinx_nor_read_sr() - Read the Status Register on S3AN flashes. 71 * @nor: pointer to 'struct spi_nor'. 72 * @sr: pointer to a DMA-able buffer where the value of the 73 * Status Register will be written. 74 * 75 * Return: 0 on success, -errno otherwise. 76 */ 77 static int xilinx_nor_read_sr(struct spi_nor *nor, u8 *sr) 78 { 79 int ret; 80 81 if (nor->spimem) { 82 struct spi_mem_op op = XILINX_RDSR_OP(sr); 83 84 spi_nor_spimem_setup_op(nor, &op, nor->reg_proto); 85 86 ret = spi_mem_exec_op(nor->spimem, &op); 87 } else { 88 ret = spi_nor_controller_ops_read_reg(nor, XILINX_OP_RDSR, sr, 89 1); 90 } 91 92 if (ret) 93 dev_dbg(nor->dev, "error %d reading SR\n", ret); 94 95 return ret; 96 } 97 98 /** 99 * xilinx_nor_sr_ready() - Query the Status Register of the S3AN flash to see 100 * if the flash is ready for new commands. 101 * @nor: pointer to 'struct spi_nor'. 102 * 103 * Return: 1 if ready, 0 if not ready, -errno on errors. 104 */ 105 static int xilinx_nor_sr_ready(struct spi_nor *nor) 106 { 107 int ret; 108 109 ret = xilinx_nor_read_sr(nor, nor->bouncebuf); 110 if (ret) 111 return ret; 112 113 return !!(nor->bouncebuf[0] & XSR_RDY); 114 } 115 116 static int xilinx_nor_setup(struct spi_nor *nor, 117 const struct spi_nor_hwcaps *hwcaps) 118 { 119 u32 page_size; 120 int ret; 121 122 ret = xilinx_nor_read_sr(nor, nor->bouncebuf); 123 if (ret) 124 return ret; 125 126 nor->erase_opcode = XILINX_OP_SE; 127 nor->program_opcode = XILINX_OP_PP; 128 nor->read_opcode = SPINOR_OP_READ; 129 nor->flags |= SNOR_F_NO_OP_CHIP_ERASE; 130 131 /* 132 * This flashes have a page size of 264 or 528 bytes (known as 133 * Default addressing mode). It can be changed to a more standard 134 * Power of two mode where the page size is 256/512. This comes 135 * with a price: there is 3% less of space, the data is corrupted 136 * and the page size cannot be changed back to default addressing 137 * mode. 138 * 139 * The current addressing mode can be read from the XRDSR register 140 * and should not be changed, because is a destructive operation. 141 */ 142 if (nor->bouncebuf[0] & XSR_PAGESIZE) { 143 /* Flash in Power of 2 mode */ 144 page_size = (nor->params->page_size == 264) ? 256 : 512; 145 nor->params->page_size = page_size; 146 nor->mtd.writebufsize = page_size; 147 nor->params->size = 8 * page_size * nor->info->n_sectors; 148 nor->mtd.erasesize = 8 * page_size; 149 } else { 150 /* Flash in Default addressing mode */ 151 nor->params->convert_addr = s3an_nor_convert_addr; 152 nor->mtd.erasesize = nor->info->sector_size; 153 } 154 155 return 0; 156 } 157 158 static int xilinx_nor_late_init(struct spi_nor *nor) 159 { 160 nor->params->setup = xilinx_nor_setup; 161 nor->params->ready = xilinx_nor_sr_ready; 162 163 return 0; 164 } 165 166 static const struct spi_nor_fixups xilinx_nor_fixups = { 167 .late_init = xilinx_nor_late_init, 168 }; 169 170 const struct spi_nor_manufacturer spi_nor_xilinx = { 171 .name = "xilinx", 172 .parts = xilinx_nor_parts, 173 .nparts = ARRAY_SIZE(xilinx_nor_parts), 174 .fixups = &xilinx_nor_fixups, 175 }; 176