1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (C) 2005, Intec Automation Inc. 4 * Copyright (C) 2014, Freescale Semiconductor, Inc. 5 */ 6 7 #include <linux/mtd/spi-nor.h> 8 9 #include "core.h" 10 11 /* flash_info mfr_flag. Used to read proprietary FSR register. */ 12 #define USE_FSR BIT(0) 13 14 #define SPINOR_OP_RDFSR 0x70 /* Read flag status register */ 15 #define SPINOR_OP_CLFSR 0x50 /* Clear flag status register */ 16 #define SPINOR_OP_MT_DTR_RD 0xfd /* Fast Read opcode in DTR mode */ 17 #define SPINOR_OP_MT_RD_ANY_REG 0x85 /* Read volatile register */ 18 #define SPINOR_OP_MT_WR_ANY_REG 0x81 /* Write volatile register */ 19 #define SPINOR_REG_MT_CFR0V 0x00 /* For setting octal DTR mode */ 20 #define SPINOR_REG_MT_CFR1V 0x01 /* For setting dummy cycles */ 21 #define SPINOR_REG_MT_CFR1V_DEF 0x1f /* Default dummy cycles */ 22 #define SPINOR_MT_OCT_DTR 0xe7 /* Enable Octal DTR. */ 23 #define SPINOR_MT_EXSPI 0xff /* Enable Extended SPI (default) */ 24 25 /* Flag Status Register bits */ 26 #define FSR_READY BIT(7) /* Device status, 0 = Busy, 1 = Ready */ 27 #define FSR_E_ERR BIT(5) /* Erase operation status */ 28 #define FSR_P_ERR BIT(4) /* Program operation status */ 29 #define FSR_PT_ERR BIT(1) /* Protection error bit */ 30 31 /* Micron ST SPI NOR flash operations. */ 32 #define MICRON_ST_NOR_WR_ANY_REG_OP(naddr, addr, ndata, buf) \ 33 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_MT_WR_ANY_REG, 0), \ 34 SPI_MEM_OP_ADDR(naddr, addr, 0), \ 35 SPI_MEM_OP_NO_DUMMY, \ 36 SPI_MEM_OP_DATA_OUT(ndata, buf, 0)) 37 38 #define MICRON_ST_RDFSR_OP(buf) \ 39 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_RDFSR, 0), \ 40 SPI_MEM_OP_NO_ADDR, \ 41 SPI_MEM_OP_NO_DUMMY, \ 42 SPI_MEM_OP_DATA_IN(1, buf, 0)) 43 44 #define MICRON_ST_CLFSR_OP \ 45 SPI_MEM_OP(SPI_MEM_OP_CMD(SPINOR_OP_CLFSR, 0), \ 46 SPI_MEM_OP_NO_ADDR, \ 47 SPI_MEM_OP_NO_DUMMY, \ 48 SPI_MEM_OP_NO_DATA) 49 50 static int micron_st_nor_octal_dtr_en(struct spi_nor *nor) 51 { 52 struct spi_mem_op op; 53 u8 *buf = nor->bouncebuf; 54 int ret; 55 56 /* Use 20 dummy cycles for memory array reads. */ 57 *buf = 20; 58 op = (struct spi_mem_op) 59 MICRON_ST_NOR_WR_ANY_REG_OP(3, SPINOR_REG_MT_CFR1V, 1, buf); 60 ret = spi_nor_write_any_volatile_reg(nor, &op, nor->reg_proto); 61 if (ret) 62 return ret; 63 64 buf[0] = SPINOR_MT_OCT_DTR; 65 op = (struct spi_mem_op) 66 MICRON_ST_NOR_WR_ANY_REG_OP(3, SPINOR_REG_MT_CFR0V, 1, buf); 67 ret = spi_nor_write_any_volatile_reg(nor, &op, nor->reg_proto); 68 if (ret) 69 return ret; 70 71 /* Read flash ID to make sure the switch was successful. */ 72 ret = spi_nor_read_id(nor, 0, 8, buf, SNOR_PROTO_8_8_8_DTR); 73 if (ret) { 74 dev_dbg(nor->dev, "error %d reading JEDEC ID after enabling 8D-8D-8D mode\n", ret); 75 return ret; 76 } 77 78 if (memcmp(buf, nor->info->id, nor->info->id_len)) 79 return -EINVAL; 80 81 return 0; 82 } 83 84 static int micron_st_nor_octal_dtr_dis(struct spi_nor *nor) 85 { 86 struct spi_mem_op op; 87 u8 *buf = nor->bouncebuf; 88 int ret; 89 90 /* 91 * The register is 1-byte wide, but 1-byte transactions are not allowed 92 * in 8D-8D-8D mode. The next register is the dummy cycle configuration 93 * register. Since the transaction needs to be at least 2 bytes wide, 94 * set the next register to its default value. This also makes sense 95 * because the value was changed when enabling 8D-8D-8D mode, it should 96 * be reset when disabling. 97 */ 98 buf[0] = SPINOR_MT_EXSPI; 99 buf[1] = SPINOR_REG_MT_CFR1V_DEF; 100 op = (struct spi_mem_op) 101 MICRON_ST_NOR_WR_ANY_REG_OP(4, SPINOR_REG_MT_CFR0V, 2, buf); 102 ret = spi_nor_write_any_volatile_reg(nor, &op, SNOR_PROTO_8_8_8_DTR); 103 if (ret) 104 return ret; 105 106 /* Read flash ID to make sure the switch was successful. */ 107 ret = spi_nor_read_id(nor, 0, 0, buf, SNOR_PROTO_1_1_1); 108 if (ret) { 109 dev_dbg(nor->dev, "error %d reading JEDEC ID after disabling 8D-8D-8D mode\n", ret); 110 return ret; 111 } 112 113 if (memcmp(buf, nor->info->id, nor->info->id_len)) 114 return -EINVAL; 115 116 return 0; 117 } 118 119 static int micron_st_nor_octal_dtr_enable(struct spi_nor *nor, bool enable) 120 { 121 return enable ? micron_st_nor_octal_dtr_en(nor) : 122 micron_st_nor_octal_dtr_dis(nor); 123 } 124 125 static void mt35xu512aba_default_init(struct spi_nor *nor) 126 { 127 nor->params->octal_dtr_enable = micron_st_nor_octal_dtr_enable; 128 } 129 130 static void mt35xu512aba_post_sfdp_fixup(struct spi_nor *nor) 131 { 132 /* Set the Fast Read settings. */ 133 nor->params->hwcaps.mask |= SNOR_HWCAPS_READ_8_8_8_DTR; 134 spi_nor_set_read_settings(&nor->params->reads[SNOR_CMD_READ_8_8_8_DTR], 135 0, 20, SPINOR_OP_MT_DTR_RD, 136 SNOR_PROTO_8_8_8_DTR); 137 138 nor->cmd_ext_type = SPI_NOR_EXT_REPEAT; 139 nor->params->rdsr_dummy = 8; 140 nor->params->rdsr_addr_nbytes = 0; 141 142 /* 143 * The BFPT quad enable field is set to a reserved value so the quad 144 * enable function is ignored by spi_nor_parse_bfpt(). Make sure we 145 * disable it. 146 */ 147 nor->params->quad_enable = NULL; 148 } 149 150 static const struct spi_nor_fixups mt35xu512aba_fixups = { 151 .default_init = mt35xu512aba_default_init, 152 .post_sfdp = mt35xu512aba_post_sfdp_fixup, 153 }; 154 155 static const struct flash_info micron_nor_parts[] = { 156 { "mt35xu512aba", INFO(0x2c5b1a, 0, 128 * 1024, 512) 157 NO_SFDP_FLAGS(SECT_4K | SPI_NOR_OCTAL_READ | 158 SPI_NOR_OCTAL_DTR_READ | SPI_NOR_OCTAL_DTR_PP) 159 FIXUP_FLAGS(SPI_NOR_4B_OPCODES | SPI_NOR_IO_MODE_EN_VOLATILE) 160 MFR_FLAGS(USE_FSR) 161 .fixups = &mt35xu512aba_fixups 162 }, 163 { "mt35xu02g", INFO(0x2c5b1c, 0, 128 * 1024, 2048) 164 NO_SFDP_FLAGS(SECT_4K | SPI_NOR_OCTAL_READ) 165 FIXUP_FLAGS(SPI_NOR_4B_OPCODES) 166 MFR_FLAGS(USE_FSR) 167 }, 168 }; 169 170 static const struct flash_info st_nor_parts[] = { 171 { "n25q016a", INFO(0x20bb15, 0, 64 * 1024, 32) 172 NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) }, 173 { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64) 174 NO_SFDP_FLAGS(SPI_NOR_QUAD_READ) }, 175 { "n25q032a", INFO(0x20bb16, 0, 64 * 1024, 64) 176 NO_SFDP_FLAGS(SPI_NOR_QUAD_READ) }, 177 { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128) 178 NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) }, 179 { "n25q064a", INFO(0x20bb17, 0, 64 * 1024, 128) 180 NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) }, 181 { "n25q128a11", INFO(0x20bb18, 0, 64 * 1024, 256) 182 FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP | 183 SPI_NOR_BP3_SR_BIT6) 184 NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) 185 MFR_FLAGS(USE_FSR) 186 }, 187 { "n25q128a13", INFO(0x20ba18, 0, 64 * 1024, 256) 188 FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP | 189 SPI_NOR_BP3_SR_BIT6) 190 NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) 191 MFR_FLAGS(USE_FSR) 192 }, 193 { "mt25ql256a", INFO6(0x20ba19, 0x104400, 64 * 1024, 512) 194 NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) 195 FIXUP_FLAGS(SPI_NOR_4B_OPCODES) 196 MFR_FLAGS(USE_FSR) 197 }, 198 { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512) 199 NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | 200 SPI_NOR_QUAD_READ) 201 MFR_FLAGS(USE_FSR) 202 }, 203 { "mt25qu256a", INFO6(0x20bb19, 0x104400, 64 * 1024, 512) 204 NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) 205 FIXUP_FLAGS(SPI_NOR_4B_OPCODES) 206 MFR_FLAGS(USE_FSR) 207 }, 208 { "n25q256ax1", INFO(0x20bb19, 0, 64 * 1024, 512) 209 NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) 210 MFR_FLAGS(USE_FSR) 211 }, 212 { "mt25ql512a", INFO6(0x20ba20, 0x104400, 64 * 1024, 1024) 213 NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) 214 FIXUP_FLAGS(SPI_NOR_4B_OPCODES) 215 MFR_FLAGS(USE_FSR) 216 }, 217 { "n25q512ax3", INFO(0x20ba20, 0, 64 * 1024, 1024) 218 FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP | 219 SPI_NOR_BP3_SR_BIT6) 220 NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) 221 MFR_FLAGS(USE_FSR) 222 }, 223 { "mt25qu512a", INFO6(0x20bb20, 0x104400, 64 * 1024, 1024) 224 NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) 225 FIXUP_FLAGS(SPI_NOR_4B_OPCODES) 226 MFR_FLAGS(USE_FSR) 227 }, 228 { "n25q512a", INFO(0x20bb20, 0, 64 * 1024, 1024) 229 FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP | 230 SPI_NOR_BP3_SR_BIT6) 231 NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) 232 MFR_FLAGS(USE_FSR) 233 }, 234 { "n25q00", INFO(0x20ba21, 0, 64 * 1024, 2048) 235 FLAGS(SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB | SPI_NOR_4BIT_BP | 236 SPI_NOR_BP3_SR_BIT6 | NO_CHIP_ERASE) 237 NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) 238 MFR_FLAGS(USE_FSR) 239 }, 240 { "n25q00a", INFO(0x20bb21, 0, 64 * 1024, 2048) 241 FLAGS(NO_CHIP_ERASE) 242 NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) 243 MFR_FLAGS(USE_FSR) 244 }, 245 { "mt25ql02g", INFO(0x20ba22, 0, 64 * 1024, 4096) 246 FLAGS(NO_CHIP_ERASE) 247 NO_SFDP_FLAGS(SECT_4K | SPI_NOR_QUAD_READ) 248 MFR_FLAGS(USE_FSR) 249 }, 250 { "mt25qu02g", INFO(0x20bb22, 0, 64 * 1024, 4096) 251 FLAGS(NO_CHIP_ERASE) 252 NO_SFDP_FLAGS(SECT_4K | SPI_NOR_DUAL_READ | 253 SPI_NOR_QUAD_READ) 254 MFR_FLAGS(USE_FSR) 255 }, 256 257 { "m25p05", INFO(0x202010, 0, 32 * 1024, 2) }, 258 { "m25p10", INFO(0x202011, 0, 32 * 1024, 4) }, 259 { "m25p20", INFO(0x202012, 0, 64 * 1024, 4) }, 260 { "m25p40", INFO(0x202013, 0, 64 * 1024, 8) }, 261 { "m25p80", INFO(0x202014, 0, 64 * 1024, 16) }, 262 { "m25p16", INFO(0x202015, 0, 64 * 1024, 32) }, 263 { "m25p32", INFO(0x202016, 0, 64 * 1024, 64) }, 264 { "m25p64", INFO(0x202017, 0, 64 * 1024, 128) }, 265 { "m25p128", INFO(0x202018, 0, 256 * 1024, 64) }, 266 267 { "m25p05-nonjedec", INFO(0, 0, 32 * 1024, 2) }, 268 { "m25p10-nonjedec", INFO(0, 0, 32 * 1024, 4) }, 269 { "m25p20-nonjedec", INFO(0, 0, 64 * 1024, 4) }, 270 { "m25p40-nonjedec", INFO(0, 0, 64 * 1024, 8) }, 271 { "m25p80-nonjedec", INFO(0, 0, 64 * 1024, 16) }, 272 { "m25p16-nonjedec", INFO(0, 0, 64 * 1024, 32) }, 273 { "m25p32-nonjedec", INFO(0, 0, 64 * 1024, 64) }, 274 { "m25p64-nonjedec", INFO(0, 0, 64 * 1024, 128) }, 275 { "m25p128-nonjedec", INFO(0, 0, 256 * 1024, 64) }, 276 277 { "m45pe10", INFO(0x204011, 0, 64 * 1024, 2) }, 278 { "m45pe80", INFO(0x204014, 0, 64 * 1024, 16) }, 279 { "m45pe16", INFO(0x204015, 0, 64 * 1024, 32) }, 280 281 { "m25pe20", INFO(0x208012, 0, 64 * 1024, 4) }, 282 { "m25pe80", INFO(0x208014, 0, 64 * 1024, 16) }, 283 { "m25pe16", INFO(0x208015, 0, 64 * 1024, 32) 284 NO_SFDP_FLAGS(SECT_4K) }, 285 286 { "m25px16", INFO(0x207115, 0, 64 * 1024, 32) 287 NO_SFDP_FLAGS(SECT_4K) }, 288 { "m25px32", INFO(0x207116, 0, 64 * 1024, 64) 289 NO_SFDP_FLAGS(SECT_4K) }, 290 { "m25px32-s0", INFO(0x207316, 0, 64 * 1024, 64) 291 NO_SFDP_FLAGS(SECT_4K) }, 292 { "m25px32-s1", INFO(0x206316, 0, 64 * 1024, 64) 293 NO_SFDP_FLAGS(SECT_4K) }, 294 { "m25px64", INFO(0x207117, 0, 64 * 1024, 128) }, 295 { "m25px80", INFO(0x207114, 0, 64 * 1024, 16) }, 296 }; 297 298 /** 299 * micron_st_nor_set_4byte_addr_mode() - Set 4-byte address mode for ST and 300 * Micron flashes. 301 * @nor: pointer to 'struct spi_nor'. 302 * @enable: true to enter the 4-byte address mode, false to exit the 4-byte 303 * address mode. 304 * 305 * Return: 0 on success, -errno otherwise. 306 */ 307 static int micron_st_nor_set_4byte_addr_mode(struct spi_nor *nor, bool enable) 308 { 309 int ret; 310 311 ret = spi_nor_write_enable(nor); 312 if (ret) 313 return ret; 314 315 ret = spi_nor_set_4byte_addr_mode(nor, enable); 316 if (ret) 317 return ret; 318 319 return spi_nor_write_disable(nor); 320 } 321 322 /** 323 * micron_st_nor_read_fsr() - Read the Flag Status Register. 324 * @nor: pointer to 'struct spi_nor' 325 * @fsr: pointer to a DMA-able buffer where the value of the 326 * Flag Status Register will be written. Should be at least 2 327 * bytes. 328 * 329 * Return: 0 on success, -errno otherwise. 330 */ 331 static int micron_st_nor_read_fsr(struct spi_nor *nor, u8 *fsr) 332 { 333 int ret; 334 335 if (nor->spimem) { 336 struct spi_mem_op op = MICRON_ST_RDFSR_OP(fsr); 337 338 if (nor->reg_proto == SNOR_PROTO_8_8_8_DTR) { 339 op.addr.nbytes = nor->params->rdsr_addr_nbytes; 340 op.dummy.nbytes = nor->params->rdsr_dummy; 341 /* 342 * We don't want to read only one byte in DTR mode. So, 343 * read 2 and then discard the second byte. 344 */ 345 op.data.nbytes = 2; 346 } 347 348 spi_nor_spimem_setup_op(nor, &op, nor->reg_proto); 349 350 ret = spi_mem_exec_op(nor->spimem, &op); 351 } else { 352 ret = spi_nor_controller_ops_read_reg(nor, SPINOR_OP_RDFSR, fsr, 353 1); 354 } 355 356 if (ret) 357 dev_dbg(nor->dev, "error %d reading FSR\n", ret); 358 359 return ret; 360 } 361 362 /** 363 * micron_st_nor_clear_fsr() - Clear the Flag Status Register. 364 * @nor: pointer to 'struct spi_nor'. 365 */ 366 static void micron_st_nor_clear_fsr(struct spi_nor *nor) 367 { 368 int ret; 369 370 if (nor->spimem) { 371 struct spi_mem_op op = MICRON_ST_CLFSR_OP; 372 373 spi_nor_spimem_setup_op(nor, &op, nor->reg_proto); 374 375 ret = spi_mem_exec_op(nor->spimem, &op); 376 } else { 377 ret = spi_nor_controller_ops_write_reg(nor, SPINOR_OP_CLFSR, 378 NULL, 0); 379 } 380 381 if (ret) 382 dev_dbg(nor->dev, "error %d clearing FSR\n", ret); 383 } 384 385 /** 386 * micron_st_nor_ready() - Query the Status Register as well as the Flag Status 387 * Register to see if the flash is ready for new commands. If there are any 388 * errors in the FSR clear them. 389 * @nor: pointer to 'struct spi_nor'. 390 * 391 * Return: 1 if ready, 0 if not ready, -errno on errors. 392 */ 393 static int micron_st_nor_ready(struct spi_nor *nor) 394 { 395 int sr_ready, ret; 396 397 sr_ready = spi_nor_sr_ready(nor); 398 if (sr_ready < 0) 399 return sr_ready; 400 401 ret = micron_st_nor_read_fsr(nor, nor->bouncebuf); 402 if (ret) 403 return ret; 404 405 if (nor->bouncebuf[0] & (FSR_E_ERR | FSR_P_ERR)) { 406 if (nor->bouncebuf[0] & FSR_E_ERR) 407 dev_err(nor->dev, "Erase operation failed.\n"); 408 else 409 dev_err(nor->dev, "Program operation failed.\n"); 410 411 if (nor->bouncebuf[0] & FSR_PT_ERR) 412 dev_err(nor->dev, 413 "Attempted to modify a protected sector.\n"); 414 415 micron_st_nor_clear_fsr(nor); 416 417 /* 418 * WEL bit remains set to one when an erase or page program 419 * error occurs. Issue a Write Disable command to protect 420 * against inadvertent writes that can possibly corrupt the 421 * contents of the memory. 422 */ 423 ret = spi_nor_write_disable(nor); 424 if (ret) 425 return ret; 426 427 return -EIO; 428 } 429 430 return sr_ready && !!(nor->bouncebuf[0] & FSR_READY); 431 } 432 433 static void micron_st_nor_default_init(struct spi_nor *nor) 434 { 435 nor->flags |= SNOR_F_HAS_LOCK; 436 nor->flags &= ~SNOR_F_HAS_16BIT_SR; 437 nor->params->quad_enable = NULL; 438 nor->params->set_4byte_addr_mode = micron_st_nor_set_4byte_addr_mode; 439 } 440 441 static void micron_st_nor_late_init(struct spi_nor *nor) 442 { 443 if (nor->info->mfr_flags & USE_FSR) 444 nor->params->ready = micron_st_nor_ready; 445 } 446 447 static const struct spi_nor_fixups micron_st_nor_fixups = { 448 .default_init = micron_st_nor_default_init, 449 .late_init = micron_st_nor_late_init, 450 }; 451 452 const struct spi_nor_manufacturer spi_nor_micron = { 453 .name = "micron", 454 .parts = micron_nor_parts, 455 .nparts = ARRAY_SIZE(micron_nor_parts), 456 .fixups = µn_st_nor_fixups, 457 }; 458 459 const struct spi_nor_manufacturer spi_nor_st = { 460 .name = "st", 461 .parts = st_nor_parts, 462 .nparts = ARRAY_SIZE(st_nor_parts), 463 .fixups = µn_st_nor_fixups, 464 }; 465