1# SPDX-License-Identifier: GPL-2.0-only 2config MTD_AR7_PARTS 3 tristate "TI AR7 partitioning parser" 4 help 5 TI AR7 partitioning parser support 6 7config MTD_BCM47XX_PARTS 8 tristate "BCM47XX partitioning parser" 9 depends on BCM47XX || ARCH_BCM_5301X 10 help 11 This provides partitions parser for devices based on BCM47xx 12 boards. 13 14config MTD_BCM63XX_PARTS 15 bool "BCM63XX CFE partitioning parser" 16 depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST 17 select CRC32 18 select MTD_PARSER_IMAGETAG 19 help 20 This provides partition parsing for BCM63xx devices with CFE 21 bootloaders. 22 23config MTD_BRCM_U_BOOT 24 tristate "Broadcom's U-Boot partition parser" 25 depends on ARCH_BCMBCA || COMPILE_TEST 26 help 27 Broadcom uses a custom way of storing U-Boot environment variables. 28 They are placed inside U-Boot partition itself at unspecified offset. 29 It's possible to locate them by looking for a custom header with a 30 magic value. This driver does that and creates subpartitions for 31 each found environment variables block. 32 33config MTD_CMDLINE_PARTS 34 tristate "Command line partition table parsing" 35 depends on MTD 36 help 37 Allow generic configuration of the MTD partition tables via the kernel 38 command line. Multiple flash resources are supported for hardware where 39 different kinds of flash memory are available. 40 41 You will still need the parsing functions to be called by the driver 42 for your particular device. It won't happen automatically. The 43 SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for 44 example. 45 46 The format for the command line is as follows: 47 48 mtdparts=<mtddef>[;<mtddef] 49 <mtddef> := <mtd-id>:<partdef>[,<partdef>] 50 <partdef> := <size>[@offset][<name>][ro] 51 <mtd-id> := unique id used in mapping driver/device 52 <size> := standard linux memsize OR "-" to denote all 53 remaining space 54 <name> := (NAME) 55 56 Due to the way Linux handles the command line, no spaces are 57 allowed in the partition definition, including mtd id's and partition 58 names. 59 60 Examples: 61 62 1 flash resource (mtd-id "sa1100"), with 1 single writable partition: 63 mtdparts=sa1100:- 64 65 Same flash, but 2 named partitions, the first one being read-only: 66 mtdparts=sa1100:256k(ARMboot)ro,-(root) 67 68 If unsure, say 'N'. 69 70config MTD_OF_PARTS 71 tristate "OpenFirmware (device tree) partitioning parser" 72 default y 73 depends on OF 74 help 75 This provides a open firmware device tree partition parser 76 which derives the partition map from the children of the 77 flash memory node, as described in 78 Documentation/devicetree/bindings/mtd/mtd.yaml. 79 80config MTD_OF_PARTS_BCM4908 81 bool "BCM4908 partitioning support" 82 depends on MTD_OF_PARTS && (ARCH_BCMBCA || COMPILE_TEST) 83 default ARCH_BCMBCA 84 help 85 This provides partitions parser for BCM4908 family devices 86 that can have multiple "firmware" partitions. It takes care of 87 finding currently used one and backup ones. 88 89config MTD_OF_PARTS_LINKSYS_NS 90 bool "Linksys Northstar partitioning support" 91 depends on MTD_OF_PARTS && (ARCH_BCM_5301X || ARCH_BCMBCA || COMPILE_TEST) 92 default ARCH_BCM_5301X 93 help 94 This provides partitions parser for Linksys devices based on Broadcom 95 Northstar architecture. Linksys commonly uses fixed flash layout with 96 two "firmware" partitions. Currently used firmware has to be detected 97 using CFE environment variable. 98 99config MTD_PARSER_IMAGETAG 100 tristate "Parser for BCM963XX Image Tag format partitions" 101 depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST 102 select CRC32 103 help 104 Image Tag is the firmware header used by broadcom on their xDSL line 105 of devices. It is used to describe the offsets and lengths of kernel 106 and rootfs partitions. 107 This driver adds support for parsing a partition with an Image Tag 108 header and creates up to two partitions, kernel and rootfs. 109 110config MTD_AFS_PARTS 111 tristate "ARM Firmware Suite partition parsing" 112 depends on (ARM || ARM64) 113 help 114 The ARM Firmware Suite allows the user to divide flash devices into 115 multiple 'images'. Each such image has a header containing its name 116 and offset/size etc. 117 118 If you need code which can detect and parse these tables, and 119 register MTD 'partitions' corresponding to each image detected, 120 enable this option. 121 122 You will still need the parsing functions to be called by the driver 123 for your particular device. It won't happen automatically. The 124 'physmap' map driver (CONFIG_MTD_PHYSMAP) does this, for example. 125 126config MTD_PARSER_TPLINK_SAFELOADER 127 tristate "TP-Link Safeloader partitions parser" 128 depends on MTD && (ARCH_BCM_5301X || ATH79 || SOC_MT7620 || SOC_MT7621 || COMPILE_TEST) 129 help 130 TP-Link home routers use flash partitions to store various data. Info 131 about flash space layout is stored in a partitions table using a 132 custom ASCII-based format. 133 134 That format was first found in devices with SafeLoader bootloader and 135 was named after it. Later it was adapted to CFE and U-Boot 136 bootloaders. 137 138 This driver reads partitions table, parses it and creates MTD 139 partitions. 140 141config MTD_PARSER_TRX 142 tristate "Parser for TRX format partitions" 143 depends on MTD && (BCM47XX || ARCH_BCM_5301X || ARCH_MEDIATEK || RALINK || COMPILE_TEST) 144 help 145 TRX is a firmware format used by Broadcom on their devices. It 146 may contain up to 3/4 partitions (depending on the version). 147 This driver will parse TRX header and report at least two partitions: 148 kernel and rootfs. 149 150config MTD_SHARPSL_PARTS 151 tristate "Sharp SL Series NAND flash partition parser" 152 depends on MTD_NAND_SHARPSL || COMPILE_TEST 153 help 154 This provides the read-only FTL logic necessary to read the partition 155 table from the NAND flash of Sharp SL Series (Zaurus) and the MTD 156 partition parser using this code. 157 158config MTD_REDBOOT_PARTS 159 tristate "RedBoot partition table parsing" 160 help 161 RedBoot is a ROM monitor and bootloader which deals with multiple 162 'images' in flash devices by putting a table one of the erase 163 blocks on the device, similar to a partition table, which gives 164 the offsets, lengths and names of all the images stored in the 165 flash. 166 167 If you need code which can detect and parse this table, and register 168 MTD 'partitions' corresponding to each image in the table, enable 169 this option. 170 171 You will still need the parsing functions to be called by the driver 172 for your particular device. It won't happen automatically. The 173 SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for 174 example. 175 176if MTD_REDBOOT_PARTS 177 178config MTD_REDBOOT_DIRECTORY_BLOCK 179 int "Location of RedBoot partition table" 180 default "-1" 181 help 182 This option is the Linux counterpart to the 183 CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK RedBoot compile time 184 option. 185 186 The option specifies which Flash sectors holds the RedBoot 187 partition table. A zero or positive value gives an absolute 188 erase block number. A negative value specifies a number of 189 sectors before the end of the device. 190 191 For example "2" means block number 2, "-1" means the last 192 block and "-2" means the penultimate block. 193 194config MTD_REDBOOT_PARTS_UNALLOCATED 195 bool "Include unallocated flash regions" 196 help 197 If you need to register each unallocated flash region as a MTD 198 'partition', enable this option. 199 200config MTD_REDBOOT_PARTS_READONLY 201 bool "Force read-only for RedBoot system images" 202 help 203 If you need to force read-only for 'RedBoot', 'RedBoot Config' and 204 'FIS directory' images, enable this option. 205 206endif # MTD_REDBOOT_PARTS 207 208config MTD_QCOMSMEM_PARTS 209 tristate "Qualcomm SMEM flash partition parser" 210 depends on QCOM_SMEM 211 help 212 This provides support for parsing partitions from Shared Memory (SMEM) 213 for NAND and SPI flash on Qualcomm platforms. 214 215config MTD_SERCOMM_PARTS 216 tristate "Sercomm partition table parser" 217 depends on MTD && RALINK 218 help 219 This provides partitions table parser for devices with Sercomm 220 partition map. This partition table contains real partition 221 offsets, which may differ from device to device depending on the 222 number and location of bad blocks on NAND. 223