xref: /openbmc/linux/drivers/mtd/nand/raw/sharpsl.c (revision 2427f03f)
1 // SPDX-License-Identifier: GPL-2.0-only
2 /*
3  *  Copyright (C) 2004 Richard Purdie
4  *  Copyright (C) 2008 Dmitry Baryshkov
5  *
6  *  Based on Sharp's NAND driver sharp_sl.c
7  */
8 
9 #include <linux/genhd.h>
10 #include <linux/slab.h>
11 #include <linux/module.h>
12 #include <linux/delay.h>
13 #include <linux/mtd/mtd.h>
14 #include <linux/mtd/rawnand.h>
15 #include <linux/mtd/partitions.h>
16 #include <linux/mtd/sharpsl.h>
17 #include <linux/interrupt.h>
18 #include <linux/platform_device.h>
19 #include <linux/io.h>
20 
21 struct sharpsl_nand {
22 	struct nand_controller	controller;
23 	struct nand_chip	chip;
24 
25 	void __iomem		*io;
26 };
27 
28 static inline struct sharpsl_nand *mtd_to_sharpsl(struct mtd_info *mtd)
29 {
30 	return container_of(mtd_to_nand(mtd), struct sharpsl_nand, chip);
31 }
32 
33 /* register offset */
34 #define ECCLPLB		0x00	/* line parity 7 - 0 bit */
35 #define ECCLPUB		0x04	/* line parity 15 - 8 bit */
36 #define ECCCP		0x08	/* column parity 5 - 0 bit */
37 #define ECCCNTR		0x0C	/* ECC byte counter */
38 #define ECCCLRR		0x10	/* cleare ECC */
39 #define FLASHIO		0x14	/* Flash I/O */
40 #define FLASHCTL	0x18	/* Flash Control */
41 
42 /* Flash control bit */
43 #define FLRYBY		(1 << 5)
44 #define FLCE1		(1 << 4)
45 #define FLWP		(1 << 3)
46 #define FLALE		(1 << 2)
47 #define FLCLE		(1 << 1)
48 #define FLCE0		(1 << 0)
49 
50 /*
51  *	hardware specific access to control-lines
52  *	ctrl:
53  *	NAND_CNE: bit 0 -> ! bit 0 & 4
54  *	NAND_CLE: bit 1 -> bit 1
55  *	NAND_ALE: bit 2 -> bit 2
56  *
57  */
58 static void sharpsl_nand_hwcontrol(struct nand_chip *chip, int cmd,
59 				   unsigned int ctrl)
60 {
61 	struct sharpsl_nand *sharpsl = mtd_to_sharpsl(nand_to_mtd(chip));
62 
63 	if (ctrl & NAND_CTRL_CHANGE) {
64 		unsigned char bits = ctrl & 0x07;
65 
66 		bits |= (ctrl & 0x01) << 4;
67 
68 		bits ^= 0x11;
69 
70 		writeb((readb(sharpsl->io + FLASHCTL) & ~0x17) | bits, sharpsl->io + FLASHCTL);
71 	}
72 
73 	if (cmd != NAND_CMD_NONE)
74 		writeb(cmd, chip->legacy.IO_ADDR_W);
75 }
76 
77 static int sharpsl_nand_dev_ready(struct nand_chip *chip)
78 {
79 	struct sharpsl_nand *sharpsl = mtd_to_sharpsl(nand_to_mtd(chip));
80 	return !((readb(sharpsl->io + FLASHCTL) & FLRYBY) == 0);
81 }
82 
83 static void sharpsl_nand_enable_hwecc(struct nand_chip *chip, int mode)
84 {
85 	struct sharpsl_nand *sharpsl = mtd_to_sharpsl(nand_to_mtd(chip));
86 	writeb(0, sharpsl->io + ECCCLRR);
87 }
88 
89 static int sharpsl_nand_calculate_ecc(struct nand_chip *chip,
90 				      const u_char * dat, u_char * ecc_code)
91 {
92 	struct sharpsl_nand *sharpsl = mtd_to_sharpsl(nand_to_mtd(chip));
93 	ecc_code[0] = ~readb(sharpsl->io + ECCLPUB);
94 	ecc_code[1] = ~readb(sharpsl->io + ECCLPLB);
95 	ecc_code[2] = (~readb(sharpsl->io + ECCCP) << 2) | 0x03;
96 	return readb(sharpsl->io + ECCCNTR) != 0;
97 }
98 
99 static int sharpsl_attach_chip(struct nand_chip *chip)
100 {
101 	if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
102 		return 0;
103 
104 	chip->ecc.size = 256;
105 	chip->ecc.bytes = 3;
106 	chip->ecc.strength = 1;
107 	chip->ecc.hwctl = sharpsl_nand_enable_hwecc;
108 	chip->ecc.calculate = sharpsl_nand_calculate_ecc;
109 	chip->ecc.correct = rawnand_sw_hamming_correct;
110 
111 	return 0;
112 }
113 
114 static const struct nand_controller_ops sharpsl_ops = {
115 	.attach_chip = sharpsl_attach_chip,
116 };
117 
118 /*
119  * Main initialization routine
120  */
121 static int sharpsl_nand_probe(struct platform_device *pdev)
122 {
123 	struct nand_chip *this;
124 	struct mtd_info *mtd;
125 	struct resource *r;
126 	int err = 0;
127 	struct sharpsl_nand *sharpsl;
128 	struct sharpsl_nand_platform_data *data = dev_get_platdata(&pdev->dev);
129 
130 	if (!data) {
131 		dev_err(&pdev->dev, "no platform data!\n");
132 		return -EINVAL;
133 	}
134 
135 	/* Allocate memory for MTD device structure and private data */
136 	sharpsl = kzalloc(sizeof(struct sharpsl_nand), GFP_KERNEL);
137 	if (!sharpsl)
138 		return -ENOMEM;
139 
140 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
141 	if (!r) {
142 		dev_err(&pdev->dev, "no io memory resource defined!\n");
143 		err = -ENODEV;
144 		goto err_get_res;
145 	}
146 
147 	/* map physical address */
148 	sharpsl->io = ioremap(r->start, resource_size(r));
149 	if (!sharpsl->io) {
150 		dev_err(&pdev->dev, "ioremap to access Sharp SL NAND chip failed\n");
151 		err = -EIO;
152 		goto err_ioremap;
153 	}
154 
155 	/* Get pointer to private data */
156 	this = (struct nand_chip *)(&sharpsl->chip);
157 
158 	nand_controller_init(&sharpsl->controller);
159 	sharpsl->controller.ops = &sharpsl_ops;
160 	this->controller = &sharpsl->controller;
161 
162 	/* Link the private data with the MTD structure */
163 	mtd = nand_to_mtd(this);
164 	mtd->dev.parent = &pdev->dev;
165 	mtd_set_ooblayout(mtd, data->ecc_layout);
166 
167 	platform_set_drvdata(pdev, sharpsl);
168 
169 	/*
170 	 * PXA initialize
171 	 */
172 	writeb(readb(sharpsl->io + FLASHCTL) | FLWP, sharpsl->io + FLASHCTL);
173 
174 	/* Set address of NAND IO lines */
175 	this->legacy.IO_ADDR_R = sharpsl->io + FLASHIO;
176 	this->legacy.IO_ADDR_W = sharpsl->io + FLASHIO;
177 	/* Set address of hardware control function */
178 	this->legacy.cmd_ctrl = sharpsl_nand_hwcontrol;
179 	this->legacy.dev_ready = sharpsl_nand_dev_ready;
180 	/* 15 us command delay time */
181 	this->legacy.chip_delay = 15;
182 	this->badblock_pattern = data->badblock_pattern;
183 
184 	/* Scan to find existence of the device */
185 	err = nand_scan(this, 1);
186 	if (err)
187 		goto err_scan;
188 
189 	/* Register the partitions */
190 	mtd->name = "sharpsl-nand";
191 
192 	err = mtd_device_parse_register(mtd, data->part_parsers, NULL,
193 					data->partitions, data->nr_partitions);
194 	if (err)
195 		goto err_add;
196 
197 	/* Return happy */
198 	return 0;
199 
200 err_add:
201 	nand_cleanup(this);
202 
203 err_scan:
204 	iounmap(sharpsl->io);
205 err_ioremap:
206 err_get_res:
207 	kfree(sharpsl);
208 	return err;
209 }
210 
211 /*
212  * Clean up routine
213  */
214 static int sharpsl_nand_remove(struct platform_device *pdev)
215 {
216 	struct sharpsl_nand *sharpsl = platform_get_drvdata(pdev);
217 	struct nand_chip *chip = &sharpsl->chip;
218 	int ret;
219 
220 	/* Unregister device */
221 	ret = mtd_device_unregister(nand_to_mtd(chip));
222 	WARN_ON(ret);
223 
224 	/* Release resources */
225 	nand_cleanup(chip);
226 
227 	iounmap(sharpsl->io);
228 
229 	/* Free the driver's structure */
230 	kfree(sharpsl);
231 
232 	return 0;
233 }
234 
235 static struct platform_driver sharpsl_nand_driver = {
236 	.driver = {
237 		.name	= "sharpsl-nand",
238 	},
239 	.probe		= sharpsl_nand_probe,
240 	.remove		= sharpsl_nand_remove,
241 };
242 
243 module_platform_driver(sharpsl_nand_driver);
244 
245 MODULE_LICENSE("GPL");
246 MODULE_AUTHOR("Richard Purdie <rpurdie@rpsys.net>");
247 MODULE_DESCRIPTION("Device specific logic for NAND flash on Sharp SL-C7xx Series");
248