1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Copyright (C) 2017 Free Electrons 4 * Copyright (C) 2017 NextThing Co 5 * 6 * Author: Boris Brezillon <boris.brezillon@free-electrons.com> 7 */ 8 9 #include <linux/sizes.h> 10 #include <linux/slab.h> 11 12 #include "internals.h" 13 14 #define NAND_HYNIX_CMD_SET_PARAMS 0x36 15 #define NAND_HYNIX_CMD_APPLY_PARAMS 0x16 16 17 #define NAND_HYNIX_1XNM_RR_REPEAT 8 18 19 /** 20 * struct hynix_read_retry - read-retry data 21 * @nregs: number of register to set when applying a new read-retry mode 22 * @regs: register offsets (NAND chip dependent) 23 * @values: array of values to set in registers. The array size is equal to 24 * (nregs * nmodes) 25 */ 26 struct hynix_read_retry { 27 int nregs; 28 const u8 *regs; 29 u8 values[]; 30 }; 31 32 /** 33 * struct hynix_nand - private Hynix NAND struct 34 * @nand_technology: manufacturing process expressed in picometer 35 * @read_retry: read-retry information 36 */ 37 struct hynix_nand { 38 const struct hynix_read_retry *read_retry; 39 }; 40 41 /** 42 * struct hynix_read_retry_otp - structure describing how the read-retry OTP 43 * area 44 * @nregs: number of hynix private registers to set before reading the reading 45 * the OTP area 46 * @regs: registers that should be configured 47 * @values: values that should be set in regs 48 * @page: the address to pass to the READ_PAGE command. Depends on the NAND 49 * chip 50 * @size: size of the read-retry OTP section 51 */ 52 struct hynix_read_retry_otp { 53 int nregs; 54 const u8 *regs; 55 const u8 *values; 56 int page; 57 int size; 58 }; 59 60 static bool hynix_nand_has_valid_jedecid(struct nand_chip *chip) 61 { 62 u8 jedecid[5] = { }; 63 int ret; 64 65 ret = nand_readid_op(chip, 0x40, jedecid, sizeof(jedecid)); 66 if (ret) 67 return false; 68 69 return !strncmp("JEDEC", jedecid, sizeof(jedecid)); 70 } 71 72 static int hynix_nand_cmd_op(struct nand_chip *chip, u8 cmd) 73 { 74 if (nand_has_exec_op(chip)) { 75 struct nand_op_instr instrs[] = { 76 NAND_OP_CMD(cmd, 0), 77 }; 78 struct nand_operation op = NAND_OPERATION(chip->cur_cs, instrs); 79 80 return nand_exec_op(chip, &op); 81 } 82 83 chip->legacy.cmdfunc(chip, cmd, -1, -1); 84 85 return 0; 86 } 87 88 static int hynix_nand_reg_write_op(struct nand_chip *chip, u8 addr, u8 val) 89 { 90 u16 column = ((u16)addr << 8) | addr; 91 92 if (nand_has_exec_op(chip)) { 93 struct nand_op_instr instrs[] = { 94 NAND_OP_ADDR(1, &addr, 0), 95 NAND_OP_8BIT_DATA_OUT(1, &val, 0), 96 }; 97 struct nand_operation op = NAND_OPERATION(chip->cur_cs, instrs); 98 99 return nand_exec_op(chip, &op); 100 } 101 102 chip->legacy.cmdfunc(chip, NAND_CMD_NONE, column, -1); 103 chip->legacy.write_byte(chip, val); 104 105 return 0; 106 } 107 108 static int hynix_nand_setup_read_retry(struct nand_chip *chip, int retry_mode) 109 { 110 struct hynix_nand *hynix = nand_get_manufacturer_data(chip); 111 const u8 *values; 112 int i, ret; 113 114 values = hynix->read_retry->values + 115 (retry_mode * hynix->read_retry->nregs); 116 117 /* Enter 'Set Hynix Parameters' mode */ 118 ret = hynix_nand_cmd_op(chip, NAND_HYNIX_CMD_SET_PARAMS); 119 if (ret) 120 return ret; 121 122 /* 123 * Configure the NAND in the requested read-retry mode. 124 * This is done by setting pre-defined values in internal NAND 125 * registers. 126 * 127 * The set of registers is NAND specific, and the values are either 128 * predefined or extracted from an OTP area on the NAND (values are 129 * probably tweaked at production in this case). 130 */ 131 for (i = 0; i < hynix->read_retry->nregs; i++) { 132 ret = hynix_nand_reg_write_op(chip, hynix->read_retry->regs[i], 133 values[i]); 134 if (ret) 135 return ret; 136 } 137 138 /* Apply the new settings. */ 139 return hynix_nand_cmd_op(chip, NAND_HYNIX_CMD_APPLY_PARAMS); 140 } 141 142 /** 143 * hynix_get_majority - get the value that is occurring the most in a given 144 * set of values 145 * @in: the array of values to test 146 * @repeat: the size of the in array 147 * @out: pointer used to store the output value 148 * 149 * This function implements the 'majority check' logic that is supposed to 150 * overcome the unreliability of MLC NANDs when reading the OTP area storing 151 * the read-retry parameters. 152 * 153 * It's based on a pretty simple assumption: if we repeat the same value 154 * several times and then take the one that is occurring the most, we should 155 * find the correct value. 156 * Let's hope this dummy algorithm prevents us from losing the read-retry 157 * parameters. 158 */ 159 static int hynix_get_majority(const u8 *in, int repeat, u8 *out) 160 { 161 int i, j, half = repeat / 2; 162 163 /* 164 * We only test the first half of the in array because we must ensure 165 * that the value is at least occurring repeat / 2 times. 166 * 167 * This loop is suboptimal since we may count the occurrences of the 168 * same value several time, but we are doing that on small sets, which 169 * makes it acceptable. 170 */ 171 for (i = 0; i < half; i++) { 172 int cnt = 0; 173 u8 val = in[i]; 174 175 /* Count all values that are matching the one at index i. */ 176 for (j = i + 1; j < repeat; j++) { 177 if (in[j] == val) 178 cnt++; 179 } 180 181 /* We found a value occurring more than repeat / 2. */ 182 if (cnt > half) { 183 *out = val; 184 return 0; 185 } 186 } 187 188 return -EIO; 189 } 190 191 static int hynix_read_rr_otp(struct nand_chip *chip, 192 const struct hynix_read_retry_otp *info, 193 void *buf) 194 { 195 int i, ret; 196 197 ret = nand_reset_op(chip); 198 if (ret) 199 return ret; 200 201 ret = hynix_nand_cmd_op(chip, NAND_HYNIX_CMD_SET_PARAMS); 202 if (ret) 203 return ret; 204 205 for (i = 0; i < info->nregs; i++) { 206 ret = hynix_nand_reg_write_op(chip, info->regs[i], 207 info->values[i]); 208 if (ret) 209 return ret; 210 } 211 212 ret = hynix_nand_cmd_op(chip, NAND_HYNIX_CMD_APPLY_PARAMS); 213 if (ret) 214 return ret; 215 216 /* Sequence to enter OTP mode? */ 217 ret = hynix_nand_cmd_op(chip, 0x17); 218 if (ret) 219 return ret; 220 221 ret = hynix_nand_cmd_op(chip, 0x4); 222 if (ret) 223 return ret; 224 225 ret = hynix_nand_cmd_op(chip, 0x19); 226 if (ret) 227 return ret; 228 229 /* Now read the page */ 230 ret = nand_read_page_op(chip, info->page, 0, buf, info->size); 231 if (ret) 232 return ret; 233 234 /* Put everything back to normal */ 235 ret = nand_reset_op(chip); 236 if (ret) 237 return ret; 238 239 ret = hynix_nand_cmd_op(chip, NAND_HYNIX_CMD_SET_PARAMS); 240 if (ret) 241 return ret; 242 243 ret = hynix_nand_reg_write_op(chip, 0x38, 0); 244 if (ret) 245 return ret; 246 247 ret = hynix_nand_cmd_op(chip, NAND_HYNIX_CMD_APPLY_PARAMS); 248 if (ret) 249 return ret; 250 251 return nand_read_page_op(chip, 0, 0, NULL, 0); 252 } 253 254 #define NAND_HYNIX_1XNM_RR_COUNT_OFFS 0 255 #define NAND_HYNIX_1XNM_RR_REG_COUNT_OFFS 8 256 #define NAND_HYNIX_1XNM_RR_SET_OFFS(x, setsize, inv) \ 257 (16 + ((((x) * 2) + ((inv) ? 1 : 0)) * (setsize))) 258 259 static int hynix_mlc_1xnm_rr_value(const u8 *buf, int nmodes, int nregs, 260 int mode, int reg, bool inv, u8 *val) 261 { 262 u8 tmp[NAND_HYNIX_1XNM_RR_REPEAT]; 263 int val_offs = (mode * nregs) + reg; 264 int set_size = nmodes * nregs; 265 int i, ret; 266 267 for (i = 0; i < NAND_HYNIX_1XNM_RR_REPEAT; i++) { 268 int set_offs = NAND_HYNIX_1XNM_RR_SET_OFFS(i, set_size, inv); 269 270 tmp[i] = buf[val_offs + set_offs]; 271 } 272 273 ret = hynix_get_majority(tmp, NAND_HYNIX_1XNM_RR_REPEAT, val); 274 if (ret) 275 return ret; 276 277 if (inv) 278 *val = ~*val; 279 280 return 0; 281 } 282 283 static u8 hynix_1xnm_mlc_read_retry_regs[] = { 284 0xcc, 0xbf, 0xaa, 0xab, 0xcd, 0xad, 0xae, 0xaf 285 }; 286 287 static int hynix_mlc_1xnm_rr_init(struct nand_chip *chip, 288 const struct hynix_read_retry_otp *info) 289 { 290 struct hynix_nand *hynix = nand_get_manufacturer_data(chip); 291 struct hynix_read_retry *rr = NULL; 292 int ret, i, j; 293 u8 nregs, nmodes; 294 u8 *buf; 295 296 buf = kmalloc(info->size, GFP_KERNEL); 297 if (!buf) 298 return -ENOMEM; 299 300 ret = hynix_read_rr_otp(chip, info, buf); 301 if (ret) 302 goto out; 303 304 ret = hynix_get_majority(buf, NAND_HYNIX_1XNM_RR_REPEAT, 305 &nmodes); 306 if (ret) 307 goto out; 308 309 ret = hynix_get_majority(buf + NAND_HYNIX_1XNM_RR_REPEAT, 310 NAND_HYNIX_1XNM_RR_REPEAT, 311 &nregs); 312 if (ret) 313 goto out; 314 315 rr = kzalloc(sizeof(*rr) + (nregs * nmodes), GFP_KERNEL); 316 if (!rr) { 317 ret = -ENOMEM; 318 goto out; 319 } 320 321 for (i = 0; i < nmodes; i++) { 322 for (j = 0; j < nregs; j++) { 323 u8 *val = rr->values + (i * nregs); 324 325 ret = hynix_mlc_1xnm_rr_value(buf, nmodes, nregs, i, j, 326 false, val); 327 if (!ret) 328 continue; 329 330 ret = hynix_mlc_1xnm_rr_value(buf, nmodes, nregs, i, j, 331 true, val); 332 if (ret) 333 goto out; 334 } 335 } 336 337 rr->nregs = nregs; 338 rr->regs = hynix_1xnm_mlc_read_retry_regs; 339 hynix->read_retry = rr; 340 chip->ops.setup_read_retry = hynix_nand_setup_read_retry; 341 chip->read_retries = nmodes; 342 343 out: 344 kfree(buf); 345 346 if (ret) 347 kfree(rr); 348 349 return ret; 350 } 351 352 static const u8 hynix_mlc_1xnm_rr_otp_regs[] = { 0x38 }; 353 static const u8 hynix_mlc_1xnm_rr_otp_values[] = { 0x52 }; 354 355 static const struct hynix_read_retry_otp hynix_mlc_1xnm_rr_otps[] = { 356 { 357 .nregs = ARRAY_SIZE(hynix_mlc_1xnm_rr_otp_regs), 358 .regs = hynix_mlc_1xnm_rr_otp_regs, 359 .values = hynix_mlc_1xnm_rr_otp_values, 360 .page = 0x21f, 361 .size = 784 362 }, 363 { 364 .nregs = ARRAY_SIZE(hynix_mlc_1xnm_rr_otp_regs), 365 .regs = hynix_mlc_1xnm_rr_otp_regs, 366 .values = hynix_mlc_1xnm_rr_otp_values, 367 .page = 0x200, 368 .size = 528, 369 }, 370 }; 371 372 static int hynix_nand_rr_init(struct nand_chip *chip) 373 { 374 int i, ret = 0; 375 bool valid_jedecid; 376 377 valid_jedecid = hynix_nand_has_valid_jedecid(chip); 378 379 /* 380 * We only support read-retry for 1xnm NANDs, and those NANDs all 381 * expose a valid JEDEC ID. 382 */ 383 if (valid_jedecid) { 384 u8 nand_tech = chip->id.data[5] >> 4; 385 386 /* 1xnm technology */ 387 if (nand_tech == 4) { 388 for (i = 0; i < ARRAY_SIZE(hynix_mlc_1xnm_rr_otps); 389 i++) { 390 /* 391 * FIXME: Hynix recommend to copy the 392 * read-retry OTP area into a normal page. 393 */ 394 ret = hynix_mlc_1xnm_rr_init(chip, 395 hynix_mlc_1xnm_rr_otps); 396 if (!ret) 397 break; 398 } 399 } 400 } 401 402 if (ret) 403 pr_warn("failed to initialize read-retry infrastructure"); 404 405 return 0; 406 } 407 408 static void hynix_nand_extract_oobsize(struct nand_chip *chip, 409 bool valid_jedecid) 410 { 411 struct mtd_info *mtd = nand_to_mtd(chip); 412 struct nand_memory_organization *memorg; 413 u8 oobsize; 414 415 memorg = nanddev_get_memorg(&chip->base); 416 417 oobsize = ((chip->id.data[3] >> 2) & 0x3) | 418 ((chip->id.data[3] >> 4) & 0x4); 419 420 if (valid_jedecid) { 421 switch (oobsize) { 422 case 0: 423 memorg->oobsize = 2048; 424 break; 425 case 1: 426 memorg->oobsize = 1664; 427 break; 428 case 2: 429 memorg->oobsize = 1024; 430 break; 431 case 3: 432 memorg->oobsize = 640; 433 break; 434 default: 435 /* 436 * We should never reach this case, but if that 437 * happens, this probably means Hynix decided to use 438 * a different extended ID format, and we should find 439 * a way to support it. 440 */ 441 WARN(1, "Invalid OOB size"); 442 break; 443 } 444 } else { 445 switch (oobsize) { 446 case 0: 447 memorg->oobsize = 128; 448 break; 449 case 1: 450 memorg->oobsize = 224; 451 break; 452 case 2: 453 memorg->oobsize = 448; 454 break; 455 case 3: 456 memorg->oobsize = 64; 457 break; 458 case 4: 459 memorg->oobsize = 32; 460 break; 461 case 5: 462 memorg->oobsize = 16; 463 break; 464 case 6: 465 memorg->oobsize = 640; 466 break; 467 default: 468 /* 469 * We should never reach this case, but if that 470 * happens, this probably means Hynix decided to use 471 * a different extended ID format, and we should find 472 * a way to support it. 473 */ 474 WARN(1, "Invalid OOB size"); 475 break; 476 } 477 478 /* 479 * The datasheet of H27UCG8T2BTR mentions that the "Redundant 480 * Area Size" is encoded "per 8KB" (page size). This chip uses 481 * a page size of 16KiB. The datasheet mentions an OOB size of 482 * 1.280 bytes, but the OOB size encoded in the ID bytes (using 483 * the existing logic above) is 640 bytes. 484 * Update the OOB size for this chip by taking the value 485 * determined above and scaling it to the actual page size (so 486 * the actual OOB size for this chip is: 640 * 16k / 8k). 487 */ 488 if (chip->id.data[1] == 0xde) 489 memorg->oobsize *= memorg->pagesize / SZ_8K; 490 } 491 492 mtd->oobsize = memorg->oobsize; 493 } 494 495 static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip, 496 bool valid_jedecid) 497 { 498 struct nand_device *base = &chip->base; 499 struct nand_ecc_props requirements = {}; 500 u8 ecc_level = (chip->id.data[4] >> 4) & 0x7; 501 502 if (valid_jedecid) { 503 /* Reference: H27UCG8T2E datasheet */ 504 requirements.step_size = 1024; 505 506 switch (ecc_level) { 507 case 0: 508 requirements.step_size = 0; 509 requirements.strength = 0; 510 break; 511 case 1: 512 requirements.strength = 4; 513 break; 514 case 2: 515 requirements.strength = 24; 516 break; 517 case 3: 518 requirements.strength = 32; 519 break; 520 case 4: 521 requirements.strength = 40; 522 break; 523 case 5: 524 requirements.strength = 50; 525 break; 526 case 6: 527 requirements.strength = 60; 528 break; 529 default: 530 /* 531 * We should never reach this case, but if that 532 * happens, this probably means Hynix decided to use 533 * a different extended ID format, and we should find 534 * a way to support it. 535 */ 536 WARN(1, "Invalid ECC requirements"); 537 } 538 } else { 539 /* 540 * The ECC requirements field meaning depends on the 541 * NAND technology. 542 */ 543 u8 nand_tech = chip->id.data[5] & 0x7; 544 545 if (nand_tech < 3) { 546 /* > 26nm, reference: H27UBG8T2A datasheet */ 547 if (ecc_level < 5) { 548 requirements.step_size = 512; 549 requirements.strength = 1 << ecc_level; 550 } else if (ecc_level < 7) { 551 if (ecc_level == 5) 552 requirements.step_size = 2048; 553 else 554 requirements.step_size = 1024; 555 requirements.strength = 24; 556 } else { 557 /* 558 * We should never reach this case, but if that 559 * happens, this probably means Hynix decided 560 * to use a different extended ID format, and 561 * we should find a way to support it. 562 */ 563 WARN(1, "Invalid ECC requirements"); 564 } 565 } else { 566 /* <= 26nm, reference: H27UBG8T2B datasheet */ 567 if (!ecc_level) { 568 requirements.step_size = 0; 569 requirements.strength = 0; 570 } else if (ecc_level < 5) { 571 requirements.step_size = 512; 572 requirements.strength = 1 << (ecc_level - 1); 573 } else { 574 requirements.step_size = 1024; 575 requirements.strength = 24 + 576 (8 * (ecc_level - 5)); 577 } 578 } 579 } 580 581 nanddev_set_ecc_requirements(base, &requirements); 582 } 583 584 static void hynix_nand_extract_scrambling_requirements(struct nand_chip *chip, 585 bool valid_jedecid) 586 { 587 u8 nand_tech; 588 589 /* We need scrambling on all TLC NANDs*/ 590 if (nanddev_bits_per_cell(&chip->base) > 2) 591 chip->options |= NAND_NEED_SCRAMBLING; 592 593 /* And on MLC NANDs with sub-3xnm process */ 594 if (valid_jedecid) { 595 nand_tech = chip->id.data[5] >> 4; 596 597 /* < 3xnm */ 598 if (nand_tech > 0) 599 chip->options |= NAND_NEED_SCRAMBLING; 600 } else { 601 nand_tech = chip->id.data[5] & 0x7; 602 603 /* < 32nm */ 604 if (nand_tech > 2) 605 chip->options |= NAND_NEED_SCRAMBLING; 606 } 607 } 608 609 static void hynix_nand_decode_id(struct nand_chip *chip) 610 { 611 struct mtd_info *mtd = nand_to_mtd(chip); 612 struct nand_memory_organization *memorg; 613 bool valid_jedecid; 614 u8 tmp; 615 616 memorg = nanddev_get_memorg(&chip->base); 617 618 /* 619 * Exclude all SLC NANDs from this advanced detection scheme. 620 * According to the ranges defined in several datasheets, it might 621 * appear that even SLC NANDs could fall in this extended ID scheme. 622 * If that the case rework the test to let SLC NANDs go through the 623 * detection process. 624 */ 625 if (chip->id.len < 6 || nand_is_slc(chip)) { 626 nand_decode_ext_id(chip); 627 return; 628 } 629 630 /* Extract pagesize */ 631 memorg->pagesize = 2048 << (chip->id.data[3] & 0x03); 632 mtd->writesize = memorg->pagesize; 633 634 tmp = (chip->id.data[3] >> 4) & 0x3; 635 /* 636 * When bit7 is set that means we start counting at 1MiB, otherwise 637 * we start counting at 128KiB and shift this value the content of 638 * ID[3][4:5]. 639 * The only exception is when ID[3][4:5] == 3 and ID[3][7] == 0, in 640 * this case the erasesize is set to 768KiB. 641 */ 642 if (chip->id.data[3] & 0x80) { 643 memorg->pages_per_eraseblock = (SZ_1M << tmp) / 644 memorg->pagesize; 645 mtd->erasesize = SZ_1M << tmp; 646 } else if (tmp == 3) { 647 memorg->pages_per_eraseblock = (SZ_512K + SZ_256K) / 648 memorg->pagesize; 649 mtd->erasesize = SZ_512K + SZ_256K; 650 } else { 651 memorg->pages_per_eraseblock = (SZ_128K << tmp) / 652 memorg->pagesize; 653 mtd->erasesize = SZ_128K << tmp; 654 } 655 656 /* 657 * Modern Toggle DDR NANDs have a valid JEDECID even though they are 658 * not exposing a valid JEDEC parameter table. 659 * These NANDs use a different NAND ID scheme. 660 */ 661 valid_jedecid = hynix_nand_has_valid_jedecid(chip); 662 663 hynix_nand_extract_oobsize(chip, valid_jedecid); 664 hynix_nand_extract_ecc_requirements(chip, valid_jedecid); 665 hynix_nand_extract_scrambling_requirements(chip, valid_jedecid); 666 } 667 668 static void hynix_nand_cleanup(struct nand_chip *chip) 669 { 670 struct hynix_nand *hynix = nand_get_manufacturer_data(chip); 671 672 if (!hynix) 673 return; 674 675 kfree(hynix->read_retry); 676 kfree(hynix); 677 nand_set_manufacturer_data(chip, NULL); 678 } 679 680 static int 681 h27ucg8t2atrbc_choose_interface_config(struct nand_chip *chip, 682 struct nand_interface_config *iface) 683 { 684 onfi_fill_interface_config(chip, iface, NAND_SDR_IFACE, 4); 685 686 return nand_choose_best_sdr_timings(chip, iface, NULL); 687 } 688 689 static int hynix_nand_init(struct nand_chip *chip) 690 { 691 struct hynix_nand *hynix; 692 int ret; 693 694 if (!nand_is_slc(chip)) 695 chip->options |= NAND_BBM_LASTPAGE; 696 else 697 chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE; 698 699 hynix = kzalloc(sizeof(*hynix), GFP_KERNEL); 700 if (!hynix) 701 return -ENOMEM; 702 703 nand_set_manufacturer_data(chip, hynix); 704 705 if (!strncmp("H27UCG8T2ATR-BC", chip->parameters.model, 706 sizeof("H27UCG8T2ATR-BC") - 1)) 707 chip->ops.choose_interface_config = 708 h27ucg8t2atrbc_choose_interface_config; 709 710 ret = hynix_nand_rr_init(chip); 711 if (ret) 712 hynix_nand_cleanup(chip); 713 714 return ret; 715 } 716 717 const struct nand_manufacturer_ops hynix_nand_manuf_ops = { 718 .detect = hynix_nand_decode_id, 719 .init = hynix_nand_init, 720 .cleanup = hynix_nand_cleanup, 721 }; 722