1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * JZ4780 BCH controller driver
4  *
5  * Copyright (c) 2015 Imagination Technologies
6  * Author: Alex Smith <alex.smith@imgtec.com>
7  */
8 
9 #include <linux/bitops.h>
10 #include <linux/clk.h>
11 #include <linux/device.h>
12 #include <linux/io.h>
13 #include <linux/iopoll.h>
14 #include <linux/module.h>
15 #include <linux/mutex.h>
16 #include <linux/of_platform.h>
17 #include <linux/platform_device.h>
18 
19 #include "ingenic_ecc.h"
20 
21 #define BCH_BHCR			0x0
22 #define BCH_BHCCR			0x8
23 #define BCH_BHCNT			0xc
24 #define BCH_BHDR			0x10
25 #define BCH_BHPAR0			0x14
26 #define BCH_BHERR0			0x84
27 #define BCH_BHINT			0x184
28 #define BCH_BHINTES			0x188
29 #define BCH_BHINTEC			0x18c
30 #define BCH_BHINTE			0x190
31 
32 #define BCH_BHCR_BSEL_SHIFT		4
33 #define BCH_BHCR_BSEL_MASK		(0x7f << BCH_BHCR_BSEL_SHIFT)
34 #define BCH_BHCR_ENCE			BIT(2)
35 #define BCH_BHCR_INIT			BIT(1)
36 #define BCH_BHCR_BCHE			BIT(0)
37 
38 #define BCH_BHCNT_PARITYSIZE_SHIFT	16
39 #define BCH_BHCNT_PARITYSIZE_MASK	(0x7f << BCH_BHCNT_PARITYSIZE_SHIFT)
40 #define BCH_BHCNT_BLOCKSIZE_SHIFT	0
41 #define BCH_BHCNT_BLOCKSIZE_MASK	(0x7ff << BCH_BHCNT_BLOCKSIZE_SHIFT)
42 
43 #define BCH_BHERR_MASK_SHIFT		16
44 #define BCH_BHERR_MASK_MASK		(0xffff << BCH_BHERR_MASK_SHIFT)
45 #define BCH_BHERR_INDEX_SHIFT		0
46 #define BCH_BHERR_INDEX_MASK		(0x7ff << BCH_BHERR_INDEX_SHIFT)
47 
48 #define BCH_BHINT_ERRC_SHIFT		24
49 #define BCH_BHINT_ERRC_MASK		(0x7f << BCH_BHINT_ERRC_SHIFT)
50 #define BCH_BHINT_TERRC_SHIFT		16
51 #define BCH_BHINT_TERRC_MASK		(0x7f << BCH_BHINT_TERRC_SHIFT)
52 #define BCH_BHINT_DECF			BIT(3)
53 #define BCH_BHINT_ENCF			BIT(2)
54 #define BCH_BHINT_UNCOR			BIT(1)
55 #define BCH_BHINT_ERR			BIT(0)
56 
57 #define BCH_CLK_RATE			(200 * 1000 * 1000)
58 
59 /* Timeout for BCH calculation/correction. */
60 #define BCH_TIMEOUT_US			100000
61 
62 static void jz4780_bch_reset(struct ingenic_ecc *bch,
63 			     struct ingenic_ecc_params *params, bool encode)
64 {
65 	u32 reg;
66 
67 	/* Clear interrupt status. */
68 	writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
69 
70 	/* Set up BCH count register. */
71 	reg = params->size << BCH_BHCNT_BLOCKSIZE_SHIFT;
72 	reg |= params->bytes << BCH_BHCNT_PARITYSIZE_SHIFT;
73 	writel(reg, bch->base + BCH_BHCNT);
74 
75 	/* Initialise and enable BCH. */
76 	reg = BCH_BHCR_BCHE | BCH_BHCR_INIT;
77 	reg |= params->strength << BCH_BHCR_BSEL_SHIFT;
78 	if (encode)
79 		reg |= BCH_BHCR_ENCE;
80 	writel(reg, bch->base + BCH_BHCR);
81 }
82 
83 static void jz4780_bch_disable(struct ingenic_ecc *bch)
84 {
85 	writel(readl(bch->base + BCH_BHINT), bch->base + BCH_BHINT);
86 	writel(BCH_BHCR_BCHE, bch->base + BCH_BHCCR);
87 }
88 
89 static void jz4780_bch_write_data(struct ingenic_ecc *bch, const void *buf,
90 				  size_t size)
91 {
92 	size_t size32 = size / sizeof(u32);
93 	size_t size8 = size % sizeof(u32);
94 	const u32 *src32;
95 	const u8 *src8;
96 
97 	src32 = (const u32 *)buf;
98 	while (size32--)
99 		writel(*src32++, bch->base + BCH_BHDR);
100 
101 	src8 = (const u8 *)src32;
102 	while (size8--)
103 		writeb(*src8++, bch->base + BCH_BHDR);
104 }
105 
106 static void jz4780_bch_read_parity(struct ingenic_ecc *bch, void *buf,
107 				   size_t size)
108 {
109 	size_t size32 = size / sizeof(u32);
110 	size_t size8 = size % sizeof(u32);
111 	u32 *dest32;
112 	u8 *dest8;
113 	u32 val, offset = 0;
114 
115 	dest32 = (u32 *)buf;
116 	while (size32--) {
117 		*dest32++ = readl(bch->base + BCH_BHPAR0 + offset);
118 		offset += sizeof(u32);
119 	}
120 
121 	dest8 = (u8 *)dest32;
122 	val = readl(bch->base + BCH_BHPAR0 + offset);
123 	switch (size8) {
124 	case 3:
125 		dest8[2] = (val >> 16) & 0xff;
126 		/* fall through */
127 	case 2:
128 		dest8[1] = (val >> 8) & 0xff;
129 		/* fall through */
130 	case 1:
131 		dest8[0] = val & 0xff;
132 		break;
133 	}
134 }
135 
136 static bool jz4780_bch_wait_complete(struct ingenic_ecc *bch, unsigned int irq,
137 				     u32 *status)
138 {
139 	u32 reg;
140 	int ret;
141 
142 	/*
143 	 * While we could use interrupts here and sleep until the operation
144 	 * completes, the controller works fairly quickly (usually a few
145 	 * microseconds) and so the overhead of sleeping until we get an
146 	 * interrupt quite noticeably decreases performance.
147 	 */
148 	ret = readl_poll_timeout(bch->base + BCH_BHINT, reg,
149 				 (reg & irq) == irq, 0, BCH_TIMEOUT_US);
150 	if (ret)
151 		return false;
152 
153 	if (status)
154 		*status = reg;
155 
156 	writel(reg, bch->base + BCH_BHINT);
157 	return true;
158 }
159 
160 static int jz4780_calculate(struct ingenic_ecc *bch,
161 			    struct ingenic_ecc_params *params,
162 			    const u8 *buf, u8 *ecc_code)
163 {
164 	int ret = 0;
165 
166 	mutex_lock(&bch->lock);
167 
168 	jz4780_bch_reset(bch, params, true);
169 	jz4780_bch_write_data(bch, buf, params->size);
170 
171 	if (jz4780_bch_wait_complete(bch, BCH_BHINT_ENCF, NULL)) {
172 		jz4780_bch_read_parity(bch, ecc_code, params->bytes);
173 	} else {
174 		dev_err(bch->dev, "timed out while calculating ECC\n");
175 		ret = -ETIMEDOUT;
176 	}
177 
178 	jz4780_bch_disable(bch);
179 	mutex_unlock(&bch->lock);
180 	return ret;
181 }
182 
183 static int jz4780_correct(struct ingenic_ecc *bch,
184 			  struct ingenic_ecc_params *params,
185 			  u8 *buf, u8 *ecc_code)
186 {
187 	u32 reg, mask, index;
188 	int i, ret, count;
189 
190 	mutex_lock(&bch->lock);
191 
192 	jz4780_bch_reset(bch, params, false);
193 	jz4780_bch_write_data(bch, buf, params->size);
194 	jz4780_bch_write_data(bch, ecc_code, params->bytes);
195 
196 	if (!jz4780_bch_wait_complete(bch, BCH_BHINT_DECF, &reg)) {
197 		dev_err(bch->dev, "timed out while correcting data\n");
198 		ret = -ETIMEDOUT;
199 		goto out;
200 	}
201 
202 	if (reg & BCH_BHINT_UNCOR) {
203 		dev_warn(bch->dev, "uncorrectable ECC error\n");
204 		ret = -EBADMSG;
205 		goto out;
206 	}
207 
208 	/* Correct any detected errors. */
209 	if (reg & BCH_BHINT_ERR) {
210 		count = (reg & BCH_BHINT_ERRC_MASK) >> BCH_BHINT_ERRC_SHIFT;
211 		ret = (reg & BCH_BHINT_TERRC_MASK) >> BCH_BHINT_TERRC_SHIFT;
212 
213 		for (i = 0; i < count; i++) {
214 			reg = readl(bch->base + BCH_BHERR0 + (i * 4));
215 			mask = (reg & BCH_BHERR_MASK_MASK) >>
216 						BCH_BHERR_MASK_SHIFT;
217 			index = (reg & BCH_BHERR_INDEX_MASK) >>
218 						BCH_BHERR_INDEX_SHIFT;
219 			buf[(index * 2) + 0] ^= mask;
220 			buf[(index * 2) + 1] ^= mask >> 8;
221 		}
222 	} else {
223 		ret = 0;
224 	}
225 
226 out:
227 	jz4780_bch_disable(bch);
228 	mutex_unlock(&bch->lock);
229 	return ret;
230 }
231 
232 static int jz4780_bch_probe(struct platform_device *pdev)
233 {
234 	struct ingenic_ecc *bch;
235 	int ret;
236 
237 	ret = ingenic_ecc_probe(pdev);
238 	if (ret)
239 		return ret;
240 
241 	bch = platform_get_drvdata(pdev);
242 	clk_set_rate(bch->clk, BCH_CLK_RATE);
243 
244 	return 0;
245 }
246 
247 static const struct ingenic_ecc_ops jz4780_bch_ops = {
248 	.disable = jz4780_bch_disable,
249 	.calculate = jz4780_calculate,
250 	.correct = jz4780_correct,
251 };
252 
253 static const struct of_device_id jz4780_bch_dt_match[] = {
254 	{ .compatible = "ingenic,jz4780-bch", .data = &jz4780_bch_ops },
255 	{},
256 };
257 MODULE_DEVICE_TABLE(of, jz4780_bch_dt_match);
258 
259 static struct platform_driver jz4780_bch_driver = {
260 	.probe		= jz4780_bch_probe,
261 	.driver	= {
262 		.name	= "jz4780-bch",
263 		.of_match_table = of_match_ptr(jz4780_bch_dt_match),
264 	},
265 };
266 module_platform_driver(jz4780_bch_driver);
267 
268 MODULE_AUTHOR("Alex Smith <alex@alex-smith.me.uk>");
269 MODULE_AUTHOR("Harvey Hunt <harveyhuntnexus@gmail.com>");
270 MODULE_DESCRIPTION("Ingenic JZ4780 BCH error correction driver");
271 MODULE_LICENSE("GPL v2");
272