1# SPDX-License-Identifier: GPL-2.0-only 2menuconfig MTD_RAW_NAND 3 tristate "Raw/Parallel NAND Device Support" 4 select MTD_NAND_CORE 5 select MTD_NAND_ECC 6 help 7 This enables support for accessing all type of raw/parallel 8 NAND flash devices. For further information see 9 <http://www.linux-mtd.infradead.org/doc/nand.html>. 10 11if MTD_RAW_NAND 12 13comment "Raw/parallel NAND flash controllers" 14 15config MTD_NAND_DENALI 16 tristate 17 18config MTD_NAND_DENALI_PCI 19 tristate "Denali NAND controller on Intel Moorestown" 20 select MTD_NAND_DENALI 21 depends on PCI 22 help 23 Enable the driver for NAND flash on Intel Moorestown, using the 24 Denali NAND controller core. 25 26config MTD_NAND_DENALI_DT 27 tristate "Denali NAND controller as a DT device" 28 select MTD_NAND_DENALI 29 depends on HAS_DMA && HAVE_CLK && OF 30 help 31 Enable the driver for NAND flash on platforms using a Denali NAND 32 controller as a DT device. 33 34config MTD_NAND_AMS_DELTA 35 tristate "Amstrad E3 NAND controller" 36 depends on MACH_AMS_DELTA || COMPILE_TEST 37 default y 38 help 39 Support for NAND flash on Amstrad E3 (Delta). 40 41config MTD_NAND_OMAP2 42 tristate "OMAP2, OMAP3, OMAP4 and Keystone NAND controller" 43 depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST 44 depends on HAS_IOMEM 45 help 46 Support for NAND flash on Texas Instruments OMAP2, OMAP3, OMAP4 47 and Keystone platforms. 48 49config MTD_NAND_OMAP_BCH 50 depends on MTD_NAND_OMAP2 51 bool "Support hardware based BCH error correction" 52 default n 53 select BCH 54 help 55 This config enables the ELM hardware engine, which can be used to 56 locate and correct errors when using BCH ECC scheme. This offloads 57 the cpu from doing ECC error searching and correction. However some 58 legacy OMAP families like OMAP2xxx, OMAP3xxx do not have ELM engine 59 so this is optional for them. 60 61config MTD_NAND_OMAP_BCH_BUILD 62 def_tristate MTD_NAND_OMAP2 && MTD_NAND_OMAP_BCH 63 64config MTD_NAND_AU1550 65 tristate "Au1550/1200 NAND support" 66 depends on MIPS_ALCHEMY 67 help 68 This enables the driver for the NAND flash controller on the 69 AMD/Alchemy 1550 SOC. 70 71config MTD_NAND_NDFC 72 tristate "IBM/MCC 4xx NAND controller" 73 depends on 4xx 74 select MTD_NAND_ECC_SW_HAMMING 75 select MTD_NAND_ECC_SW_HAMMING_SMC 76 help 77 NDFC Nand Flash Controllers are integrated in IBM/AMCC's 4xx SoCs 78 79config MTD_NAND_S3C2410 80 tristate "Samsung S3C NAND controller" 81 depends on ARCH_S3C24XX || ARCH_S3C64XX 82 help 83 This enables the NAND flash controller on the S3C24xx and S3C64xx 84 SoCs 85 86 No board specific support is done by this driver, each board 87 must advertise a platform_device for the driver to attach. 88 89config MTD_NAND_S3C2410_DEBUG 90 bool "Samsung S3C NAND controller debug" 91 depends on MTD_NAND_S3C2410 92 help 93 Enable debugging of the S3C NAND driver 94 95config MTD_NAND_S3C2410_CLKSTOP 96 bool "Samsung S3C NAND IDLE clock stop" 97 depends on MTD_NAND_S3C2410 98 default n 99 help 100 Stop the clock to the NAND controller when there is no chip 101 selected to save power. This will mean there is a small delay 102 when the is NAND chip selected or released, but will save 103 approximately 5mA of power when there is nothing happening. 104 105config MTD_NAND_SHARPSL 106 tristate "Sharp SL Series (C7xx + others) NAND controller" 107 depends on ARCH_PXA || COMPILE_TEST 108 depends on HAS_IOMEM 109 110config MTD_NAND_CAFE 111 tristate "OLPC CAFÉ NAND controller" 112 depends on PCI 113 select REED_SOLOMON 114 select REED_SOLOMON_DEC16 115 help 116 Use NAND flash attached to the CAFÉ chip designed for the OLPC 117 laptop. 118 119config MTD_NAND_CS553X 120 tristate "CS5535/CS5536 (AMD Geode companion) NAND controller" 121 depends on X86_32 122 depends on !UML && HAS_IOMEM 123 help 124 The CS553x companion chips for the AMD Geode processor 125 include NAND flash controllers with built-in hardware ECC 126 capabilities; enabling this option will allow you to use 127 these. The driver will check the MSRs to verify that the 128 controller is enabled for NAND, and currently requires that 129 the controller be in MMIO mode. 130 131 If you say "m", the module will be called cs553x_nand. 132 133config MTD_NAND_ATMEL 134 tristate "Atmel AT91 NAND Flash/SmartMedia NAND controller" 135 depends on ARCH_AT91 || COMPILE_TEST 136 depends on HAS_IOMEM 137 select GENERIC_ALLOCATOR 138 select MFD_ATMEL_SMC 139 help 140 Enables support for NAND Flash / Smart Media Card interface 141 on Atmel AT91 processors. 142 143config MTD_NAND_ORION 144 tristate "Marvell Orion NAND controller" 145 depends on PLAT_ORION 146 help 147 This enables the NAND flash controller on Orion machines. 148 149 No board specific support is done by this driver, each board 150 must advertise a platform_device for the driver to attach. 151 152config MTD_NAND_MARVELL 153 tristate "Marvell EBU NAND controller" 154 depends on PXA3xx || ARCH_MMP || PLAT_ORION || ARCH_MVEBU || \ 155 COMPILE_TEST 156 depends on HAS_IOMEM 157 help 158 This enables the NAND flash controller driver for Marvell boards, 159 including: 160 - PXA3xx processors (NFCv1) 161 - 32-bit Armada platforms (XP, 37x, 38x, 39x) (NFCv2) 162 - 64-bit Aramda platforms (7k, 8k) (NFCv2) 163 164config MTD_NAND_SLC_LPC32XX 165 tristate "NXP LPC32xx SLC NAND controller" 166 depends on ARCH_LPC32XX || COMPILE_TEST 167 depends on HAS_IOMEM 168 help 169 Enables support for NXP's LPC32XX SLC (i.e. for Single Level Cell 170 chips) NAND controller. This is the default for the PHYTEC 3250 171 reference board which contains a NAND256R3A2CZA6 chip. 172 173 Please check the actual NAND chip connected and its support 174 by the SLC NAND controller. 175 176config MTD_NAND_MLC_LPC32XX 177 tristate "NXP LPC32xx MLC NAND controller" 178 depends on ARCH_LPC32XX || COMPILE_TEST 179 depends on HAS_IOMEM 180 help 181 Uses the LPC32XX MLC (i.e. for Multi Level Cell chips) NAND 182 controller. This is the default for the WORK92105 controller 183 board. 184 185 Please check the actual NAND chip connected and its support 186 by the MLC NAND controller. 187 188config MTD_NAND_PASEMI 189 tristate "PA Semi PWRficient NAND controller" 190 depends on PPC_PASEMI 191 help 192 Enables support for NAND Flash interface on PA Semi PWRficient 193 based boards 194 195config MTD_NAND_TMIO 196 tristate "Toshiba Mobile IO NAND controller" 197 depends on MFD_TMIO 198 help 199 Support for NAND flash connected to a Toshiba Mobile IO 200 Controller in some PDAs, including the Sharp SL6000x. 201 202config MTD_NAND_BRCMNAND 203 tristate "Broadcom STB NAND controller" 204 depends on ARM || ARM64 || MIPS || COMPILE_TEST 205 depends on HAS_IOMEM 206 help 207 Enables the Broadcom NAND controller driver. The controller was 208 originally designed for Set-Top Box but is used on various BCM7xxx, 209 BCM3xxx, BCM63xxx, iProc/Cygnus and more. 210 211config MTD_NAND_BCM47XXNFLASH 212 tristate "BCM4706 BCMA NAND controller" 213 depends on BCMA_NFLASH 214 depends on BCMA 215 help 216 BCMA bus can have various flash memories attached, they are 217 registered by bcma as platform devices. This enables driver for 218 NAND flash memories. For now only BCM4706 is supported. 219 220config MTD_NAND_OXNAS 221 tristate "Oxford Semiconductor NAND controller" 222 depends on ARCH_OXNAS || COMPILE_TEST 223 depends on HAS_IOMEM 224 help 225 This enables the NAND flash controller on Oxford Semiconductor SoCs. 226 227config MTD_NAND_MPC5121_NFC 228 tristate "MPC5121 NAND controller" 229 depends on PPC_MPC512x 230 help 231 This enables the driver for the NAND flash controller on the 232 MPC5121 SoC. 233 234config MTD_NAND_GPMI_NAND 235 tristate "Freescale GPMI NAND controller" 236 depends on MXS_DMA 237 help 238 Enables NAND Flash support for IMX23, IMX28 or IMX6. 239 The GPMI controller is very powerful, with the help of BCH 240 module, it can do the hardware ECC. The GPMI supports several 241 NAND flashs at the same time. 242 243config MTD_NAND_FSL_ELBC 244 tristate "Freescale eLBC NAND controller" 245 depends on FSL_SOC 246 select FSL_LBC 247 help 248 Various Freescale chips, including the 8313, include a NAND Flash 249 Controller Module with built-in hardware ECC capabilities. 250 Enabling this option will enable you to use this to control 251 external NAND devices. 252 253config MTD_NAND_FSL_IFC 254 tristate "Freescale IFC NAND controller" 255 depends on FSL_SOC || ARCH_LAYERSCAPE || SOC_LS1021A || COMPILE_TEST 256 depends on HAS_IOMEM 257 select FSL_IFC 258 select MEMORY 259 help 260 Various Freescale chips e.g P1010, include a NAND Flash machine 261 with built-in hardware ECC capabilities. 262 Enabling this option will enable you to use this to control 263 external NAND devices. 264 265config MTD_NAND_FSL_UPM 266 tristate "Freescale UPM NAND controller" 267 depends on PPC_83xx || PPC_85xx 268 select FSL_LBC 269 help 270 Enables support for NAND Flash chips wired onto Freescale PowerPC 271 processor localbus with User-Programmable Machine support. 272 273config MTD_NAND_VF610_NFC 274 tristate "Freescale VF610/MPC5125 NAND controller" 275 depends on (SOC_VF610 || COMPILE_TEST) 276 depends on HAS_IOMEM 277 help 278 Enables support for NAND Flash Controller on some Freescale 279 processors like the VF610, MPC5125, MCF54418 or Kinetis K70. 280 The driver supports a maximum 2k page size. With 2k pages and 281 64 bytes or more of OOB, hardware ECC with up to 32-bit error 282 correction is supported. Hardware ECC is only enabled through 283 device tree. 284 285config MTD_NAND_MXC 286 tristate "Freescale MXC NAND controller" 287 depends on ARCH_MXC || COMPILE_TEST 288 depends on HAS_IOMEM && OF 289 help 290 This enables the driver for the NAND flash controller on the 291 MXC processors. 292 293config MTD_NAND_SH_FLCTL 294 tristate "Renesas SuperH FLCTL NAND controller" 295 depends on SUPERH || COMPILE_TEST 296 depends on HAS_IOMEM 297 help 298 Several Renesas SuperH CPU has FLCTL. This option enables support 299 for NAND Flash using FLCTL. 300 301config MTD_NAND_DAVINCI 302 tristate "DaVinci/Keystone NAND controller" 303 depends on ARCH_DAVINCI || (ARCH_KEYSTONE && TI_AEMIF) || COMPILE_TEST 304 depends on HAS_IOMEM 305 help 306 Enable the driver for NAND flash chips on Texas Instruments 307 DaVinci/Keystone processors. 308 309config MTD_NAND_TXX9NDFMC 310 tristate "TXx9 NAND controller" 311 depends on SOC_TX4938 || SOC_TX4939 || COMPILE_TEST 312 depends on HAS_IOMEM 313 help 314 This enables the NAND flash controller on the TXx9 SoCs. 315 316config MTD_NAND_SOCRATES 317 tristate "Socrates NAND controller" 318 depends on SOCRATES 319 help 320 Enables support for NAND Flash chips wired onto Socrates board. 321 322source "drivers/mtd/nand/raw/ingenic/Kconfig" 323 324config MTD_NAND_FSMC 325 tristate "ST Micros FSMC NAND controller" 326 depends on OF && HAS_IOMEM 327 depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || COMPILE_TEST 328 help 329 Enables support for NAND Flash chips on the ST Microelectronics 330 Flexible Static Memory Controller (FSMC) 331 332config MTD_NAND_XWAY 333 bool "Lantiq XWAY NAND controller" 334 depends on LANTIQ && SOC_TYPE_XWAY 335 help 336 Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached 337 to the External Bus Unit (EBU). 338 339config MTD_NAND_SUNXI 340 tristate "Allwinner NAND controller" 341 depends on ARCH_SUNXI || COMPILE_TEST 342 depends on HAS_IOMEM 343 help 344 Enables support for NAND Flash chips on Allwinner SoCs. 345 346config MTD_NAND_HISI504 347 tristate "Hisilicon Hip04 NAND controller" 348 depends on ARCH_HISI || COMPILE_TEST 349 depends on HAS_IOMEM 350 help 351 Enables support for NAND controller on Hisilicon SoC Hip04. 352 353config MTD_NAND_QCOM 354 tristate "QCOM NAND controller" 355 depends on ARCH_QCOM || COMPILE_TEST 356 depends on HAS_IOMEM 357 help 358 Enables support for NAND flash chips on SoCs containing the EBI2 NAND 359 controller. This controller is found on IPQ806x SoC. 360 361config MTD_NAND_MTK 362 tristate "MTK NAND controller" 363 depends on ARCH_MEDIATEK || COMPILE_TEST 364 depends on HAS_IOMEM 365 help 366 Enables support for NAND controller on MTK SoCs. 367 This controller is found on mt27xx, mt81xx, mt65xx SoCs. 368 369config MTD_NAND_MXIC 370 tristate "Macronix raw NAND controller" 371 depends on HAS_IOMEM || COMPILE_TEST 372 help 373 This selects the Macronix raw NAND controller driver. 374 375config MTD_NAND_TEGRA 376 tristate "NVIDIA Tegra NAND controller" 377 depends on ARCH_TEGRA || COMPILE_TEST 378 depends on HAS_IOMEM 379 help 380 Enables support for NAND flash controller on NVIDIA Tegra SoC. 381 The driver has been developed and tested on a Tegra 2 SoC. DMA 382 support, raw read/write page as well as HW ECC read/write page 383 is supported. Extra OOB bytes when using HW ECC are currently 384 not supported. 385 386config MTD_NAND_STM32_FMC2 387 tristate "Support for NAND controller on STM32MP SoCs" 388 depends on MACH_STM32MP157 || COMPILE_TEST 389 select MFD_SYSCON 390 help 391 Enables support for NAND Flash chips on SoCs containing the FMC2 392 NAND controller. This controller is found on STM32MP SoCs. 393 The controller supports a maximum 8k page size and supports 394 a maximum 8-bit correction error per sector of 512 bytes. 395 396config MTD_NAND_MESON 397 tristate "Support for NAND controller on Amlogic's Meson SoCs" 398 depends on ARCH_MESON || COMPILE_TEST 399 select MFD_SYSCON 400 help 401 Enables support for NAND controller on Amlogic's Meson SoCs. 402 This controller is found on Meson SoCs. 403 404config MTD_NAND_GPIO 405 tristate "GPIO assisted NAND controller" 406 depends on GPIOLIB || COMPILE_TEST 407 depends on HAS_IOMEM 408 help 409 This enables a NAND flash driver where control signals are 410 connected to GPIO pins, and commands and data are communicated 411 via a memory mapped interface. 412 413config MTD_NAND_PLATFORM 414 tristate "Generic NAND controller" 415 depends on HAS_IOMEM 416 help 417 This implements a generic NAND driver for on-SOC platform 418 devices. You will need to provide platform-specific functions 419 via platform_data. 420 421config MTD_NAND_CADENCE 422 tristate "Support Cadence NAND (HPNFC) controller" 423 depends on (OF || COMPILE_TEST) && HAS_IOMEM 424 help 425 Enable the driver for NAND flash on platforms using a Cadence NAND 426 controller. 427 428config MTD_NAND_ARASAN 429 tristate "Support for Arasan NAND flash controller" 430 depends on HAS_IOMEM && HAS_DMA 431 select BCH 432 help 433 Enables the driver for the Arasan NAND flash controller on 434 Zynq Ultrascale+ MPSoC. 435 436config MTD_NAND_INTEL_LGM 437 tristate "Support for NAND controller on Intel LGM SoC" 438 depends on OF || COMPILE_TEST 439 depends on HAS_IOMEM 440 help 441 Enables support for NAND Flash chips on Intel's LGM SoC. 442 NAND flash controller interfaced through the External Bus Unit. 443 444config MTD_NAND_ROCKCHIP 445 tristate "Rockchip NAND controller" 446 depends on ARCH_ROCKCHIP && HAS_IOMEM 447 help 448 Enables support for NAND controller on Rockchip SoCs. 449 There are four different versions of NAND FLASH Controllers, 450 including: 451 NFC v600: RK2928, RK3066, RK3188 452 NFC v622: RK3036, RK3128 453 NFC v800: RK3308, RV1108 454 NFC v900: PX30, RK3326 455 456config MTD_NAND_PL35X 457 tristate "ARM PL35X NAND controller" 458 depends on OF || COMPILE_TEST 459 depends on PL353_SMC 460 help 461 Enables support for PrimeCell SMC PL351 and PL353 NAND 462 controller found on Zynq7000. 463 464comment "Misc" 465 466config MTD_SM_COMMON 467 tristate 468 default n 469 470config MTD_NAND_NANDSIM 471 tristate "Support for NAND Flash Simulator" 472 help 473 The simulator may simulate various NAND flash chips for the 474 MTD nand layer. 475 476config MTD_NAND_RICOH 477 tristate "Ricoh xD card reader" 478 default n 479 depends on PCI 480 select MTD_SM_COMMON 481 help 482 Enable support for Ricoh R5C852 xD card reader 483 You also need to enable either 484 NAND SSFDC (SmartMedia) read only translation layer' or new 485 experimental, readwrite 486 'SmartMedia/xD new translation layer' 487 488config MTD_NAND_DISKONCHIP 489 tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation)" 490 depends on HAS_IOMEM 491 select REED_SOLOMON 492 select REED_SOLOMON_DEC16 493 help 494 This is a reimplementation of M-Systems DiskOnChip 2000, 495 Millennium and Millennium Plus as a standard NAND device driver, 496 as opposed to the earlier self-contained MTD device drivers. 497 This should enable, among other things, proper JFFS2 operation on 498 these devices. 499 500config MTD_NAND_DISKONCHIP_PROBE_ADVANCED 501 bool "Advanced detection options for DiskOnChip" 502 depends on MTD_NAND_DISKONCHIP 503 help 504 This option allows you to specify nonstandard address at which to 505 probe for a DiskOnChip, or to change the detection options. You 506 are unlikely to need any of this unless you are using LinuxBIOS. 507 Say 'N'. 508 509config MTD_NAND_DISKONCHIP_PROBE_ADDRESS 510 hex "Physical address of DiskOnChip" if MTD_NAND_DISKONCHIP_PROBE_ADVANCED 511 depends on MTD_NAND_DISKONCHIP 512 default "0" 513 help 514 By default, the probe for DiskOnChip devices will look for a 515 DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000. 516 This option allows you to specify a single address at which to probe 517 for the device, which is useful if you have other devices in that 518 range which get upset when they are probed. 519 520 (Note that on PowerPC, the normal probe will only check at 521 0xE4000000.) 522 523 Normally, you should leave this set to zero, to allow the probe at 524 the normal addresses. 525 526config MTD_NAND_DISKONCHIP_PROBE_HIGH 527 bool "Probe high addresses" 528 depends on MTD_NAND_DISKONCHIP_PROBE_ADVANCED 529 help 530 By default, the probe for DiskOnChip devices will look for a 531 DiskOnChip at every multiple of 0x2000 between 0xC8000 and 0xEE000. 532 This option changes to make it probe between 0xFFFC8000 and 533 0xFFFEE000. Unless you are using LinuxBIOS, this is unlikely to be 534 useful to you. Say 'N'. 535 536config MTD_NAND_DISKONCHIP_BBTWRITE 537 bool "Allow BBT writes on DiskOnChip Millennium and 2000TSOP" 538 depends on MTD_NAND_DISKONCHIP 539 help 540 On DiskOnChip devices shipped with the INFTL filesystem (Millennium 541 and 2000 TSOP/Alon), Linux reserves some space at the end of the 542 device for the Bad Block Table (BBT). If you have existing INFTL 543 data on your device (created by non-Linux tools such as M-Systems' 544 DOS drivers), your data might overlap the area Linux wants to use for 545 the BBT. If this is a concern for you, leave this option disabled and 546 Linux will not write BBT data into this area. 547 The downside of leaving this option disabled is that if bad blocks 548 are detected by Linux, they will not be recorded in the BBT, which 549 could cause future problems. 550 Once you enable this option, new filesystems (INFTL or others, created 551 in Linux or other operating systems) will not use the reserved area. 552 The only reason not to enable this option is to prevent damage to 553 preexisting filesystems. 554 Even if you leave this disabled, you can enable BBT writes at module 555 load time (assuming you build diskonchip as a module) with the module 556 parameter "inftl_bbt_write=1". 557 558endif # MTD_RAW_NAND 559