1 /* 2 * MTD map driver for BIOS Flash on Intel SCB2 boards 3 * Copyright (C) 2002 Sun Microsystems, Inc. 4 * Tim Hockin <thockin@sun.com> 5 * 6 * A few notes on this MTD map: 7 * 8 * This was developed with a small number of SCB2 boards to test on. 9 * Hopefully, Intel has not introducted too many unaccounted variables in the 10 * making of this board. 11 * 12 * The BIOS marks its own memory region as 'reserved' in the e820 map. We 13 * try to request it here, but if it fails, we carry on anyway. 14 * 15 * This is how the chip is attached, so said the schematic: 16 * * a 4 MiB (32 Mib) 16 bit chip 17 * * a 1 MiB memory region 18 * * A20 and A21 pulled up 19 * * D8-D15 ignored 20 * What this means is that, while we are addressing bytes linearly, we are 21 * really addressing words, and discarding the other byte. This means that 22 * the chip MUST BE at least 2 MiB. This also means that every block is 23 * actually half as big as the chip reports. It also means that accesses of 24 * logical address 0 hit higher-address sections of the chip, not physical 0. 25 * One can only hope that these 4MiB x16 chips were a lot cheaper than 1MiB x8 26 * chips. 27 * 28 * This driver assumes the chip is not write-protected by an external signal. 29 * As of the this writing, that is true, but may change, just to spite me. 30 * 31 * The actual BIOS layout has been mostly reverse engineered. Intel BIOS 32 * updates for this board include 10 related (*.bio - &.bi9) binary files and 33 * another separate (*.bbo) binary file. The 10 files are 64k of data + a 34 * small header. If the headers are stripped off, the 10 64k files can be 35 * concatenated into a 640k image. This is your BIOS image, proper. The 36 * separate .bbo file also has a small header. It is the 'Boot Block' 37 * recovery BIOS. Once the header is stripped, no further prep is needed. 38 * As best I can tell, the BIOS is arranged as such: 39 * offset 0x00000 to 0x4ffff (320k): unknown - SCSI BIOS, etc? 40 * offset 0x50000 to 0xeffff (640k): BIOS proper 41 * offset 0xf0000 ty 0xfffff (64k): Boot Block region 42 * 43 * Intel's BIOS update program flashes the BIOS and Boot Block in separate 44 * steps. Probably a wise thing to do. 45 */ 46 47 #include <linux/module.h> 48 #include <linux/types.h> 49 #include <linux/kernel.h> 50 #include <linux/init.h> 51 #include <asm/io.h> 52 #include <linux/mtd/mtd.h> 53 #include <linux/mtd/map.h> 54 #include <linux/mtd/cfi.h> 55 #include <linux/pci.h> 56 #include <linux/pci_ids.h> 57 58 #define MODNAME "scb2_flash" 59 #define SCB2_ADDR 0xfff00000 60 #define SCB2_WINDOW 0x00100000 61 62 63 static void __iomem *scb2_ioaddr; 64 static struct mtd_info *scb2_mtd; 65 static struct map_info scb2_map = { 66 .name = "SCB2 BIOS Flash", 67 .size = 0, 68 .bankwidth = 1, 69 }; 70 static int region_fail; 71 72 static int scb2_fixup_mtd(struct mtd_info *mtd) 73 { 74 int i; 75 int done = 0; 76 struct map_info *map = mtd->priv; 77 struct cfi_private *cfi = map->fldrv_priv; 78 79 /* barf if this doesn't look right */ 80 if (cfi->cfiq->InterfaceDesc != CFI_INTERFACE_X16_ASYNC) { 81 printk(KERN_ERR MODNAME ": unsupported InterfaceDesc: %#x\n", 82 cfi->cfiq->InterfaceDesc); 83 return -1; 84 } 85 86 /* I wasn't here. I didn't see. dwmw2. */ 87 88 /* the chip is sometimes bigger than the map - what a waste */ 89 mtd->size = map->size; 90 91 /* 92 * We only REALLY get half the chip, due to the way it is 93 * wired up - D8-D15 are tossed away. We read linear bytes, 94 * but in reality we are getting 1/2 of each 16-bit read, 95 * which LOOKS linear to us. Because CFI code accounts for 96 * things like lock/unlock/erase by eraseregions, we need to 97 * fudge them to reflect this. Erases go like this: 98 * * send an erase to an address 99 * * the chip samples the address and erases the block 100 * * add the block erasesize to the address and repeat 101 * -- the problem is that addresses are 16-bit addressable 102 * -- we end up erasing every-other block 103 */ 104 mtd->erasesize /= 2; 105 for (i = 0; i < mtd->numeraseregions; i++) { 106 struct mtd_erase_region_info *region = &mtd->eraseregions[i]; 107 region->erasesize /= 2; 108 } 109 110 /* 111 * If the chip is bigger than the map, it is wired with the high 112 * address lines pulled up. This makes us access the top portion of 113 * the chip, so all our erase-region info is wrong. Start cutting from 114 * the bottom. 115 */ 116 for (i = 0; !done && i < mtd->numeraseregions; i++) { 117 struct mtd_erase_region_info *region = &mtd->eraseregions[i]; 118 119 if (region->numblocks * region->erasesize > mtd->size) { 120 region->numblocks = ((unsigned long)mtd->size / 121 region->erasesize); 122 done = 1; 123 } else { 124 region->numblocks = 0; 125 } 126 region->offset = 0; 127 } 128 129 return 0; 130 } 131 132 /* CSB5's 'Function Control Register' has bits for decoding @ >= 0xffc00000 */ 133 #define CSB5_FCR 0x41 134 #define CSB5_FCR_DECODE_ALL 0x0e 135 static int scb2_flash_probe(struct pci_dev *dev, 136 const struct pci_device_id *ent) 137 { 138 u8 reg; 139 140 /* enable decoding of the flash region in the south bridge */ 141 pci_read_config_byte(dev, CSB5_FCR, ®); 142 pci_write_config_byte(dev, CSB5_FCR, reg | CSB5_FCR_DECODE_ALL); 143 144 if (!request_mem_region(SCB2_ADDR, SCB2_WINDOW, scb2_map.name)) { 145 /* 146 * The BIOS seems to mark the flash region as 'reserved' 147 * in the e820 map. Warn and go about our business. 148 */ 149 printk(KERN_WARNING MODNAME 150 ": warning - can't reserve rom window, continuing\n"); 151 region_fail = 1; 152 } 153 154 /* remap the IO window (w/o caching) */ 155 scb2_ioaddr = ioremap_nocache(SCB2_ADDR, SCB2_WINDOW); 156 if (!scb2_ioaddr) { 157 printk(KERN_ERR MODNAME ": Failed to ioremap window!\n"); 158 if (!region_fail) 159 release_mem_region(SCB2_ADDR, SCB2_WINDOW); 160 return -ENOMEM; 161 } 162 163 scb2_map.phys = SCB2_ADDR; 164 scb2_map.virt = scb2_ioaddr; 165 scb2_map.size = SCB2_WINDOW; 166 167 simple_map_init(&scb2_map); 168 169 /* try to find a chip */ 170 scb2_mtd = do_map_probe("cfi_probe", &scb2_map); 171 172 if (!scb2_mtd) { 173 printk(KERN_ERR MODNAME ": flash probe failed!\n"); 174 iounmap(scb2_ioaddr); 175 if (!region_fail) 176 release_mem_region(SCB2_ADDR, SCB2_WINDOW); 177 return -ENODEV; 178 } 179 180 scb2_mtd->owner = THIS_MODULE; 181 if (scb2_fixup_mtd(scb2_mtd) < 0) { 182 mtd_device_unregister(scb2_mtd); 183 map_destroy(scb2_mtd); 184 iounmap(scb2_ioaddr); 185 if (!region_fail) 186 release_mem_region(SCB2_ADDR, SCB2_WINDOW); 187 return -ENODEV; 188 } 189 190 printk(KERN_NOTICE MODNAME ": chip size 0x%llx at offset 0x%llx\n", 191 (unsigned long long)scb2_mtd->size, 192 (unsigned long long)(SCB2_WINDOW - scb2_mtd->size)); 193 194 mtd_device_register(scb2_mtd, NULL, 0); 195 196 return 0; 197 } 198 199 static void scb2_flash_remove(struct pci_dev *dev) 200 { 201 if (!scb2_mtd) 202 return; 203 204 /* disable flash writes */ 205 mtd_lock(scb2_mtd, 0, scb2_mtd->size); 206 207 mtd_device_unregister(scb2_mtd); 208 map_destroy(scb2_mtd); 209 210 iounmap(scb2_ioaddr); 211 scb2_ioaddr = NULL; 212 213 if (!region_fail) 214 release_mem_region(SCB2_ADDR, SCB2_WINDOW); 215 } 216 217 static struct pci_device_id scb2_flash_pci_ids[] = { 218 { 219 .vendor = PCI_VENDOR_ID_SERVERWORKS, 220 .device = PCI_DEVICE_ID_SERVERWORKS_CSB5, 221 .subvendor = PCI_ANY_ID, 222 .subdevice = PCI_ANY_ID 223 }, 224 { 0, } 225 }; 226 227 static struct pci_driver scb2_flash_driver = { 228 .name = "Intel SCB2 BIOS Flash", 229 .id_table = scb2_flash_pci_ids, 230 .probe = scb2_flash_probe, 231 .remove = scb2_flash_remove, 232 }; 233 234 module_pci_driver(scb2_flash_driver); 235 236 MODULE_LICENSE("GPL"); 237 MODULE_AUTHOR("Tim Hockin <thockin@sun.com>"); 238 MODULE_DESCRIPTION("MTD map driver for Intel SCB2 BIOS Flash"); 239 MODULE_DEVICE_TABLE(pci, scb2_flash_pci_ids); 240