1 /* sc520cdp.c -- MTD map driver for AMD SC520 Customer Development Platform 2 * 3 * Copyright (C) 2001 Sysgo Real-Time Solutions GmbH 4 * 5 * This program is free software; you can redistribute it and/or modify 6 * it under the terms of the GNU General Public License as published by 7 * the Free Software Foundation; either version 2 of the License, or 8 * (at your option) any later version. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 * You should have received a copy of the GNU General Public License 16 * along with this program; if not, write to the Free Software 17 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA 18 * 19 * $Id: sc520cdp.c,v 1.21 2004/12/13 10:27:08 dedekind Exp $ 20 * 21 * 22 * The SC520CDP is an evaluation board for the Elan SC520 processor available 23 * from AMD. It has two banks of 32-bit Flash ROM, each 8 Megabytes in size, 24 * and up to 512 KiB of 8-bit DIL Flash ROM. 25 * For details see http://www.amd.com/products/epd/desiging/evalboards/18.elansc520/520_cdp_brief/index.html 26 */ 27 28 #include <linux/config.h> 29 #include <linux/module.h> 30 #include <linux/types.h> 31 #include <linux/kernel.h> 32 #include <linux/init.h> 33 #include <asm/io.h> 34 #include <linux/mtd/mtd.h> 35 #include <linux/mtd/map.h> 36 #include <linux/mtd/concat.h> 37 38 /* 39 ** The Embedded Systems BIOS decodes the first FLASH starting at 40 ** 0x8400000. This is a *terrible* place for it because accessing 41 ** the flash at this location causes the A22 address line to be high 42 ** (that's what 0x8400000 binary's ought to be). But this is the highest 43 ** order address line on the raw flash devices themselves!! 44 ** This causes the top HALF of the flash to be accessed first. Beyond 45 ** the physical limits of the flash, the flash chip aliases over (to 46 ** 0x880000 which causes the bottom half to be accessed. This splits the 47 ** flash into two and inverts it! If you then try to access this from another 48 ** program that does NOT do this insanity, then you *will* access the 49 ** first half of the flash, but not find what you expect there. That 50 ** stuff is in the *second* half! Similarly, the address used by the 51 ** BIOS for the second FLASH bank is also quite a bad choice. 52 ** If REPROGRAM_PAR is defined below (the default), then this driver will 53 ** choose more useful addresses for the FLASH banks by reprogramming the 54 ** responsible PARxx registers in the SC520's MMCR region. This will 55 ** cause the settings to be incompatible with the BIOS's settings, which 56 ** shouldn't be a problem since you are running Linux, (i.e. the BIOS is 57 ** not much use anyway). However, if you need to be compatible with 58 ** the BIOS for some reason, just undefine REPROGRAM_PAR. 59 */ 60 #define REPROGRAM_PAR 61 62 63 64 #ifdef REPROGRAM_PAR 65 66 /* These are the addresses we want.. */ 67 #define WINDOW_ADDR_0 0x08800000 68 #define WINDOW_ADDR_1 0x09000000 69 #define WINDOW_ADDR_2 0x09800000 70 71 /* .. and these are the addresses the BIOS gives us */ 72 #define WINDOW_ADDR_0_BIOS 0x08400000 73 #define WINDOW_ADDR_1_BIOS 0x08c00000 74 #define WINDOW_ADDR_2_BIOS 0x09400000 75 76 #else 77 78 #define WINDOW_ADDR_0 0x08400000 79 #define WINDOW_ADDR_1 0x08C00000 80 #define WINDOW_ADDR_2 0x09400000 81 82 #endif 83 84 #define WINDOW_SIZE_0 0x00800000 85 #define WINDOW_SIZE_1 0x00800000 86 #define WINDOW_SIZE_2 0x00080000 87 88 89 static struct map_info sc520cdp_map[] = { 90 { 91 .name = "SC520CDP Flash Bank #0", 92 .size = WINDOW_SIZE_0, 93 .bankwidth = 4, 94 .phys = WINDOW_ADDR_0 95 }, 96 { 97 .name = "SC520CDP Flash Bank #1", 98 .size = WINDOW_SIZE_1, 99 .bankwidth = 4, 100 .phys = WINDOW_ADDR_1 101 }, 102 { 103 .name = "SC520CDP DIL Flash", 104 .size = WINDOW_SIZE_2, 105 .bankwidth = 1, 106 .phys = WINDOW_ADDR_2 107 }, 108 }; 109 110 #define NUM_FLASH_BANKS (sizeof(sc520cdp_map)/sizeof(struct map_info)) 111 112 static struct mtd_info *mymtd[NUM_FLASH_BANKS]; 113 static struct mtd_info *merged_mtd; 114 115 #ifdef REPROGRAM_PAR 116 117 /* 118 ** The SC520 MMCR (memory mapped control register) region resides 119 ** at 0xFFFEF000. The 16 Programmable Address Region (PAR) registers 120 ** are at offset 0x88 in the MMCR: 121 */ 122 #define SC520_MMCR_BASE 0xFFFEF000 123 #define SC520_MMCR_EXTENT 0x1000 124 #define SC520_PAR(x) ((0x88/sizeof(unsigned long)) + (x)) 125 #define NUM_SC520_PAR 16 /* total number of PAR registers */ 126 127 /* 128 ** The highest three bits in a PAR register determine what target 129 ** device is controlled by this PAR. Here, only ROMCS? and BOOTCS 130 ** devices are of interest. 131 */ 132 #define SC520_PAR_BOOTCS (0x4<<29) 133 #define SC520_PAR_ROMCS0 (0x5<<29) 134 #define SC520_PAR_ROMCS1 (0x6<<29) 135 #define SC520_PAR_TRGDEV (0x7<<29) 136 137 /* 138 ** Bits 28 thru 26 determine some attributes for the 139 ** region controlled by the PAR. (We only use non-cacheable) 140 */ 141 #define SC520_PAR_WRPROT (1<<26) /* write protected */ 142 #define SC520_PAR_NOCACHE (1<<27) /* non-cacheable */ 143 #define SC520_PAR_NOEXEC (1<<28) /* code execution denied */ 144 145 146 /* 147 ** Bit 25 determines the granularity: 4K or 64K 148 */ 149 #define SC520_PAR_PG_SIZ4 (0<<25) 150 #define SC520_PAR_PG_SIZ64 (1<<25) 151 152 /* 153 ** Build a value to be written into a PAR register. 154 ** We only need ROM entries, 64K page size: 155 */ 156 #define SC520_PAR_ENTRY(trgdev, address, size) \ 157 ((trgdev) | SC520_PAR_NOCACHE | SC520_PAR_PG_SIZ64 | \ 158 (address) >> 16 | (((size) >> 16) - 1) << 14) 159 160 struct sc520_par_table 161 { 162 unsigned long trgdev; 163 unsigned long new_par; 164 unsigned long default_address; 165 }; 166 167 static struct sc520_par_table par_table[NUM_FLASH_BANKS] = 168 { 169 { /* Flash Bank #0: selected by ROMCS0 */ 170 SC520_PAR_ROMCS0, 171 SC520_PAR_ENTRY(SC520_PAR_ROMCS0, WINDOW_ADDR_0, WINDOW_SIZE_0), 172 WINDOW_ADDR_0_BIOS 173 }, 174 { /* Flash Bank #1: selected by ROMCS1 */ 175 SC520_PAR_ROMCS1, 176 SC520_PAR_ENTRY(SC520_PAR_ROMCS1, WINDOW_ADDR_1, WINDOW_SIZE_1), 177 WINDOW_ADDR_1_BIOS 178 }, 179 { /* DIL (BIOS) Flash: selected by BOOTCS */ 180 SC520_PAR_BOOTCS, 181 SC520_PAR_ENTRY(SC520_PAR_BOOTCS, WINDOW_ADDR_2, WINDOW_SIZE_2), 182 WINDOW_ADDR_2_BIOS 183 } 184 }; 185 186 187 static void sc520cdp_setup_par(void) 188 { 189 volatile unsigned long __iomem *mmcr; 190 unsigned long mmcr_val; 191 int i, j; 192 193 /* map in SC520's MMCR area */ 194 mmcr = ioremap_nocache(SC520_MMCR_BASE, SC520_MMCR_EXTENT); 195 if(!mmcr) { /* ioremap_nocache failed: skip the PAR reprogramming */ 196 /* force physical address fields to BIOS defaults: */ 197 for(i = 0; i < NUM_FLASH_BANKS; i++) 198 sc520cdp_map[i].phys = par_table[i].default_address; 199 return; 200 } 201 202 /* 203 ** Find the PARxx registers that are reponsible for activating 204 ** ROMCS0, ROMCS1 and BOOTCS. Reprogram each of these with a 205 ** new value from the table. 206 */ 207 for(i = 0; i < NUM_FLASH_BANKS; i++) { /* for each par_table entry */ 208 for(j = 0; j < NUM_SC520_PAR; j++) { /* for each PAR register */ 209 mmcr_val = mmcr[SC520_PAR(j)]; 210 /* if target device field matches, reprogram the PAR */ 211 if((mmcr_val & SC520_PAR_TRGDEV) == par_table[i].trgdev) 212 { 213 mmcr[SC520_PAR(j)] = par_table[i].new_par; 214 break; 215 } 216 } 217 if(j == NUM_SC520_PAR) 218 { /* no matching PAR found: try default BIOS address */ 219 printk(KERN_NOTICE "Could not find PAR responsible for %s\n", 220 sc520cdp_map[i].name); 221 printk(KERN_NOTICE "Trying default address 0x%lx\n", 222 par_table[i].default_address); 223 sc520cdp_map[i].phys = par_table[i].default_address; 224 } 225 } 226 iounmap(mmcr); 227 } 228 #endif 229 230 231 static int __init init_sc520cdp(void) 232 { 233 int i, devices_found = 0; 234 235 #ifdef REPROGRAM_PAR 236 /* reprogram PAR registers so flash appears at the desired addresses */ 237 sc520cdp_setup_par(); 238 #endif 239 240 for (i = 0; i < NUM_FLASH_BANKS; i++) { 241 printk(KERN_NOTICE "SC520 CDP flash device: 0x%lx at 0x%lx\n", 242 sc520cdp_map[i].size, sc520cdp_map[i].phys); 243 244 sc520cdp_map[i].virt = ioremap_nocache(sc520cdp_map[i].phys, sc520cdp_map[i].size); 245 246 if (!sc520cdp_map[i].virt) { 247 printk("Failed to ioremap_nocache\n"); 248 return -EIO; 249 } 250 251 simple_map_init(&sc520cdp_map[i]); 252 253 mymtd[i] = do_map_probe("cfi_probe", &sc520cdp_map[i]); 254 if(!mymtd[i]) 255 mymtd[i] = do_map_probe("jedec_probe", &sc520cdp_map[i]); 256 if(!mymtd[i]) 257 mymtd[i] = do_map_probe("map_rom", &sc520cdp_map[i]); 258 259 if (mymtd[i]) { 260 mymtd[i]->owner = THIS_MODULE; 261 ++devices_found; 262 } 263 else { 264 iounmap(sc520cdp_map[i].virt); 265 } 266 } 267 if(devices_found >= 2) { 268 /* Combine the two flash banks into a single MTD device & register it: */ 269 merged_mtd = mtd_concat_create(mymtd, 2, "SC520CDP Flash Banks #0 and #1"); 270 if(merged_mtd) 271 add_mtd_device(merged_mtd); 272 } 273 if(devices_found == 3) /* register the third (DIL-Flash) device */ 274 add_mtd_device(mymtd[2]); 275 return(devices_found ? 0 : -ENXIO); 276 } 277 278 static void __exit cleanup_sc520cdp(void) 279 { 280 int i; 281 282 if (merged_mtd) { 283 del_mtd_device(merged_mtd); 284 mtd_concat_destroy(merged_mtd); 285 } 286 if (mymtd[2]) 287 del_mtd_device(mymtd[2]); 288 289 for (i = 0; i < NUM_FLASH_BANKS; i++) { 290 if (mymtd[i]) 291 map_destroy(mymtd[i]); 292 if (sc520cdp_map[i].virt) { 293 iounmap(sc520cdp_map[i].virt); 294 sc520cdp_map[i].virt = NULL; 295 } 296 } 297 } 298 299 module_init(init_sc520cdp); 300 module_exit(cleanup_sc520cdp); 301 302 MODULE_LICENSE("GPL"); 303 MODULE_AUTHOR("Sysgo Real-Time Solutions GmbH"); 304 MODULE_DESCRIPTION("MTD map driver for AMD SC520 Customer Development Platform"); 305