1 /* 2 * amd76xrom.c 3 * 4 * Normal mappings of chips in physical memory 5 */ 6 7 #include <linux/module.h> 8 #include <linux/types.h> 9 #include <linux/kernel.h> 10 #include <linux/init.h> 11 #include <asm/io.h> 12 #include <linux/mtd/mtd.h> 13 #include <linux/mtd/map.h> 14 #include <linux/mtd/cfi.h> 15 #include <linux/mtd/flashchip.h> 16 #include <linux/pci.h> 17 #include <linux/pci_ids.h> 18 #include <linux/list.h> 19 20 21 #define xstr(s) str(s) 22 #define str(s) #s 23 #define MOD_NAME xstr(KBUILD_BASENAME) 24 25 #define ADDRESS_NAME_LEN 18 26 27 #define ROM_PROBE_STEP_SIZE (64*1024) /* 64KiB */ 28 29 struct amd76xrom_window { 30 void __iomem *virt; 31 unsigned long phys; 32 unsigned long size; 33 struct list_head maps; 34 struct resource rsrc; 35 struct pci_dev *pdev; 36 }; 37 38 struct amd76xrom_map_info { 39 struct list_head list; 40 struct map_info map; 41 struct mtd_info *mtd; 42 struct resource rsrc; 43 char map_name[sizeof(MOD_NAME) + 2 + ADDRESS_NAME_LEN]; 44 }; 45 46 /* The 2 bits controlling the window size are often set to allow reading 47 * the BIOS, but too small to allow writing, since the lock registers are 48 * 4MiB lower in the address space than the data. 49 * 50 * This is intended to prevent flashing the bios, perhaps accidentally. 51 * 52 * This parameter allows the normal driver to over-ride the BIOS settings. 53 * 54 * The bits are 6 and 7. If both bits are set, it is a 5MiB window. 55 * If only the 7 Bit is set, it is a 4MiB window. Otherwise, a 56 * 64KiB window. 57 * 58 */ 59 static uint win_size_bits; 60 module_param(win_size_bits, uint, 0); 61 MODULE_PARM_DESC(win_size_bits, "ROM window size bits override for 0x43 byte, normally set by BIOS."); 62 63 static struct amd76xrom_window amd76xrom_window = { 64 .maps = LIST_HEAD_INIT(amd76xrom_window.maps), 65 }; 66 67 static void amd76xrom_cleanup(struct amd76xrom_window *window) 68 { 69 struct amd76xrom_map_info *map, *scratch; 70 u8 byte; 71 72 if (window->pdev) { 73 /* Disable writes through the rom window */ 74 pci_read_config_byte(window->pdev, 0x40, &byte); 75 pci_write_config_byte(window->pdev, 0x40, byte & ~1); 76 pci_dev_put(window->pdev); 77 } 78 79 /* Free all of the mtd devices */ 80 list_for_each_entry_safe(map, scratch, &window->maps, list) { 81 if (map->rsrc.parent) { 82 release_resource(&map->rsrc); 83 } 84 del_mtd_device(map->mtd); 85 map_destroy(map->mtd); 86 list_del(&map->list); 87 kfree(map); 88 } 89 if (window->rsrc.parent) 90 release_resource(&window->rsrc); 91 92 if (window->virt) { 93 iounmap(window->virt); 94 window->virt = NULL; 95 window->phys = 0; 96 window->size = 0; 97 window->pdev = NULL; 98 } 99 } 100 101 102 static int __devinit amd76xrom_init_one (struct pci_dev *pdev, 103 const struct pci_device_id *ent) 104 { 105 static char *rom_probe_types[] = { "cfi_probe", "jedec_probe", NULL }; 106 u8 byte; 107 struct amd76xrom_window *window = &amd76xrom_window; 108 struct amd76xrom_map_info *map = NULL; 109 unsigned long map_top; 110 111 /* Remember the pci dev I find the window in - already have a ref */ 112 window->pdev = pdev; 113 114 /* Enable the selected rom window. This is often incorrectly 115 * set up by the BIOS, and the 4MiB offset for the lock registers 116 * requires the full 5MiB of window space. 117 * 118 * This 'write, then read' approach leaves the bits for 119 * other uses of the hardware info. 120 */ 121 pci_read_config_byte(pdev, 0x43, &byte); 122 pci_write_config_byte(pdev, 0x43, byte | win_size_bits ); 123 124 /* Assume the rom window is properly setup, and find it's size */ 125 pci_read_config_byte(pdev, 0x43, &byte); 126 if ((byte & ((1<<7)|(1<<6))) == ((1<<7)|(1<<6))) { 127 window->phys = 0xffb00000; /* 5MiB */ 128 } 129 else if ((byte & (1<<7)) == (1<<7)) { 130 window->phys = 0xffc00000; /* 4MiB */ 131 } 132 else { 133 window->phys = 0xffff0000; /* 64KiB */ 134 } 135 window->size = 0xffffffffUL - window->phys + 1UL; 136 137 /* 138 * Try to reserve the window mem region. If this fails then 139 * it is likely due to a fragment of the window being 140 * "reseved" by the BIOS. In the case that the 141 * request_mem_region() fails then once the rom size is 142 * discovered we will try to reserve the unreserved fragment. 143 */ 144 window->rsrc.name = MOD_NAME; 145 window->rsrc.start = window->phys; 146 window->rsrc.end = window->phys + window->size - 1; 147 window->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY; 148 if (request_resource(&iomem_resource, &window->rsrc)) { 149 window->rsrc.parent = NULL; 150 printk(KERN_ERR MOD_NAME 151 " %s(): Unable to register resource" 152 " 0x%.16llx-0x%.16llx - kernel bug?\n", 153 __func__, 154 (unsigned long long)window->rsrc.start, 155 (unsigned long long)window->rsrc.end); 156 } 157 158 159 /* Enable writes through the rom window */ 160 pci_read_config_byte(pdev, 0x40, &byte); 161 pci_write_config_byte(pdev, 0x40, byte | 1); 162 163 /* FIXME handle registers 0x80 - 0x8C the bios region locks */ 164 165 /* For write accesses caches are useless */ 166 window->virt = ioremap_nocache(window->phys, window->size); 167 if (!window->virt) { 168 printk(KERN_ERR MOD_NAME ": ioremap(%08lx, %08lx) failed\n", 169 window->phys, window->size); 170 goto out; 171 } 172 173 /* Get the first address to look for an rom chip at */ 174 map_top = window->phys; 175 #if 1 176 /* The probe sequence run over the firmware hub lock 177 * registers sets them to 0x7 (no access). 178 * Probe at most the last 4M of the address space. 179 */ 180 if (map_top < 0xffc00000) { 181 map_top = 0xffc00000; 182 } 183 #endif 184 /* Loop through and look for rom chips */ 185 while((map_top - 1) < 0xffffffffUL) { 186 struct cfi_private *cfi; 187 unsigned long offset; 188 int i; 189 190 if (!map) { 191 map = kmalloc(sizeof(*map), GFP_KERNEL); 192 } 193 if (!map) { 194 printk(KERN_ERR MOD_NAME ": kmalloc failed"); 195 goto out; 196 } 197 memset(map, 0, sizeof(*map)); 198 INIT_LIST_HEAD(&map->list); 199 map->map.name = map->map_name; 200 map->map.phys = map_top; 201 offset = map_top - window->phys; 202 map->map.virt = (void __iomem *) 203 (((unsigned long)(window->virt)) + offset); 204 map->map.size = 0xffffffffUL - map_top + 1UL; 205 /* Set the name of the map to the address I am trying */ 206 sprintf(map->map_name, "%s @%08Lx", 207 MOD_NAME, (unsigned long long)map->map.phys); 208 209 /* There is no generic VPP support */ 210 for(map->map.bankwidth = 32; map->map.bankwidth; 211 map->map.bankwidth >>= 1) 212 { 213 char **probe_type; 214 /* Skip bankwidths that are not supported */ 215 if (!map_bankwidth_supported(map->map.bankwidth)) 216 continue; 217 218 /* Setup the map methods */ 219 simple_map_init(&map->map); 220 221 /* Try all of the probe methods */ 222 probe_type = rom_probe_types; 223 for(; *probe_type; probe_type++) { 224 map->mtd = do_map_probe(*probe_type, &map->map); 225 if (map->mtd) 226 goto found; 227 } 228 } 229 map_top += ROM_PROBE_STEP_SIZE; 230 continue; 231 found: 232 /* Trim the size if we are larger than the map */ 233 if (map->mtd->size > map->map.size) { 234 printk(KERN_WARNING MOD_NAME 235 " rom(%llu) larger than window(%lu). fixing...\n", 236 (unsigned long long)map->mtd->size, map->map.size); 237 map->mtd->size = map->map.size; 238 } 239 if (window->rsrc.parent) { 240 /* 241 * Registering the MTD device in iomem may not be possible 242 * if there is a BIOS "reserved" and BUSY range. If this 243 * fails then continue anyway. 244 */ 245 map->rsrc.name = map->map_name; 246 map->rsrc.start = map->map.phys; 247 map->rsrc.end = map->map.phys + map->mtd->size - 1; 248 map->rsrc.flags = IORESOURCE_MEM | IORESOURCE_BUSY; 249 if (request_resource(&window->rsrc, &map->rsrc)) { 250 printk(KERN_ERR MOD_NAME 251 ": cannot reserve MTD resource\n"); 252 map->rsrc.parent = NULL; 253 } 254 } 255 256 /* Make the whole region visible in the map */ 257 map->map.virt = window->virt; 258 map->map.phys = window->phys; 259 cfi = map->map.fldrv_priv; 260 for(i = 0; i < cfi->numchips; i++) { 261 cfi->chips[i].start += offset; 262 } 263 264 /* Now that the mtd devices is complete claim and export it */ 265 map->mtd->owner = THIS_MODULE; 266 if (add_mtd_device(map->mtd)) { 267 map_destroy(map->mtd); 268 map->mtd = NULL; 269 goto out; 270 } 271 272 273 /* Calculate the new value of map_top */ 274 map_top += map->mtd->size; 275 276 /* File away the map structure */ 277 list_add(&map->list, &window->maps); 278 map = NULL; 279 } 280 281 out: 282 /* Free any left over map structures */ 283 kfree(map); 284 /* See if I have any map structures */ 285 if (list_empty(&window->maps)) { 286 amd76xrom_cleanup(window); 287 return -ENODEV; 288 } 289 return 0; 290 } 291 292 293 static void __devexit amd76xrom_remove_one (struct pci_dev *pdev) 294 { 295 struct amd76xrom_window *window = &amd76xrom_window; 296 297 amd76xrom_cleanup(window); 298 } 299 300 static struct pci_device_id amd76xrom_pci_tbl[] = { 301 { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7410, 302 PCI_ANY_ID, PCI_ANY_ID, }, 303 { PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_VIPER_7440, 304 PCI_ANY_ID, PCI_ANY_ID, }, 305 { PCI_VENDOR_ID_AMD, 0x7468 }, /* amd8111 support */ 306 { 0, } 307 }; 308 309 MODULE_DEVICE_TABLE(pci, amd76xrom_pci_tbl); 310 311 #if 0 312 static struct pci_driver amd76xrom_driver = { 313 .name = MOD_NAME, 314 .id_table = amd76xrom_pci_tbl, 315 .probe = amd76xrom_init_one, 316 .remove = amd76xrom_remove_one, 317 }; 318 #endif 319 320 static int __init init_amd76xrom(void) 321 { 322 struct pci_dev *pdev; 323 struct pci_device_id *id; 324 pdev = NULL; 325 for(id = amd76xrom_pci_tbl; id->vendor; id++) { 326 pdev = pci_get_device(id->vendor, id->device, NULL); 327 if (pdev) { 328 break; 329 } 330 } 331 if (pdev) { 332 return amd76xrom_init_one(pdev, &amd76xrom_pci_tbl[0]); 333 } 334 return -ENXIO; 335 #if 0 336 return pci_register_driver(&amd76xrom_driver); 337 #endif 338 } 339 340 static void __exit cleanup_amd76xrom(void) 341 { 342 amd76xrom_remove_one(amd76xrom_window.pdev); 343 } 344 345 module_init(init_amd76xrom); 346 module_exit(cleanup_amd76xrom); 347 348 MODULE_LICENSE("GPL"); 349 MODULE_AUTHOR("Eric Biederman <ebiederman@lnxi.com>"); 350 MODULE_DESCRIPTION("MTD map driver for BIOS chips on the AMD76X southbridge"); 351 352