1 /* 2 * Handles the M-Systems DiskOnChip G3 chip 3 * 4 * Copyright (C) 2011 Robert Jarzmik 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, write to the Free Software 18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 19 * 20 */ 21 22 #ifndef _MTD_DOCG3_H 23 #define _MTD_DOCG3_H 24 25 #include <linux/mtd/mtd.h> 26 27 /* 28 * Flash memory areas : 29 * - 0x0000 .. 0x07ff : IPL 30 * - 0x0800 .. 0x0fff : Data area 31 * - 0x1000 .. 0x17ff : Registers 32 * - 0x1800 .. 0x1fff : Unknown 33 */ 34 #define DOC_IOSPACE_IPL 0x0000 35 #define DOC_IOSPACE_DATA 0x0800 36 #define DOC_IOSPACE_SIZE 0x2000 37 38 /* 39 * DOC G3 layout and adressing scheme 40 * A page address for the block "b", plane "P" and page "p": 41 * address = [bbbb bPpp pppp] 42 */ 43 44 #define DOC_ADDR_PAGE_MASK 0x3f 45 #define DOC_ADDR_BLOCK_SHIFT 6 46 #define DOC_LAYOUT_NBPLANES 2 47 #define DOC_LAYOUT_PAGES_PER_BLOCK 64 48 #define DOC_LAYOUT_PAGE_SIZE 512 49 #define DOC_LAYOUT_OOB_SIZE 16 50 #define DOC_LAYOUT_WEAR_SIZE 8 51 #define DOC_LAYOUT_PAGE_OOB_SIZE \ 52 (DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_SIZE) 53 #define DOC_LAYOUT_WEAR_OFFSET (DOC_LAYOUT_PAGE_OOB_SIZE * 2) 54 #define DOC_LAYOUT_BLOCK_SIZE \ 55 (DOC_LAYOUT_PAGES_PER_BLOCK * DOC_LAYOUT_PAGE_SIZE) 56 57 /* 58 * ECC related constants 59 */ 60 #define DOC_ECC_BCH_M 14 61 #define DOC_ECC_BCH_T 4 62 #define DOC_ECC_BCH_PRIMPOLY 0x4443 63 #define DOC_ECC_BCH_SIZE 7 64 #define DOC_ECC_BCH_COVERED_BYTES \ 65 (DOC_LAYOUT_PAGE_SIZE + DOC_LAYOUT_OOB_PAGEINFO_SZ + \ 66 DOC_LAYOUT_OOB_HAMMING_SZ) 67 #define DOC_ECC_BCH_TOTAL_BYTES \ 68 (DOC_ECC_BCH_COVERED_BYTES + DOC_LAYOUT_OOB_BCH_SZ) 69 70 /* 71 * Blocks distribution 72 */ 73 #define DOC_LAYOUT_BLOCK_BBT 0 74 #define DOC_LAYOUT_BLOCK_OTP 0 75 #define DOC_LAYOUT_BLOCK_FIRST_DATA 6 76 77 #define DOC_LAYOUT_PAGE_BBT 4 78 79 /* 80 * Extra page OOB (16 bytes wide) layout 81 */ 82 #define DOC_LAYOUT_OOB_PAGEINFO_OFS 0 83 #define DOC_LAYOUT_OOB_HAMMING_OFS 7 84 #define DOC_LAYOUT_OOB_BCH_OFS 8 85 #define DOC_LAYOUT_OOB_UNUSED_OFS 15 86 #define DOC_LAYOUT_OOB_PAGEINFO_SZ 7 87 #define DOC_LAYOUT_OOB_HAMMING_SZ 1 88 #define DOC_LAYOUT_OOB_BCH_SZ 7 89 #define DOC_LAYOUT_OOB_UNUSED_SZ 1 90 91 92 #define DOC_CHIPID_G3 0x200 93 #define DOC_ERASE_MARK 0xaa 94 #define DOC_MAX_NBFLOORS 4 95 /* 96 * Flash registers 97 */ 98 #define DOC_CHIPID 0x1000 99 #define DOC_TEST 0x1004 100 #define DOC_BUSLOCK 0x1006 101 #define DOC_ENDIANCONTROL 0x1008 102 #define DOC_DEVICESELECT 0x100a 103 #define DOC_ASICMODE 0x100c 104 #define DOC_CONFIGURATION 0x100e 105 #define DOC_INTERRUPTCONTROL 0x1010 106 #define DOC_READADDRESS 0x101a 107 #define DOC_DATAEND 0x101e 108 #define DOC_INTERRUPTSTATUS 0x1020 109 110 #define DOC_FLASHSEQUENCE 0x1032 111 #define DOC_FLASHCOMMAND 0x1034 112 #define DOC_FLASHADDRESS 0x1036 113 #define DOC_FLASHCONTROL 0x1038 114 #define DOC_NOP 0x103e 115 116 #define DOC_ECCCONF0 0x1040 117 #define DOC_ECCCONF1 0x1042 118 #define DOC_ECCPRESET 0x1044 119 #define DOC_HAMMINGPARITY 0x1046 120 #define DOC_BCH_HW_ECC(idx) (0x1048 + idx) 121 122 #define DOC_PROTECTION 0x1056 123 #define DOC_DPS0_KEY 0x105c 124 #define DOC_DPS1_KEY 0x105e 125 #define DOC_DPS0_ADDRLOW 0x1060 126 #define DOC_DPS0_ADDRHIGH 0x1062 127 #define DOC_DPS1_ADDRLOW 0x1064 128 #define DOC_DPS1_ADDRHIGH 0x1066 129 #define DOC_DPS0_STATUS 0x106c 130 #define DOC_DPS1_STATUS 0x106e 131 132 #define DOC_ASICMODECONFIRM 0x1072 133 #define DOC_CHIPID_INV 0x1074 134 #define DOC_POWERMODE 0x107c 135 136 /* 137 * Flash sequences 138 * A sequence is preset before one or more commands are input to the chip. 139 */ 140 #define DOC_SEQ_RESET 0x00 141 #define DOC_SEQ_PAGE_SIZE_532 0x03 142 #define DOC_SEQ_SET_FASTMODE 0x05 143 #define DOC_SEQ_SET_RELIABLEMODE 0x09 144 #define DOC_SEQ_READ 0x12 145 #define DOC_SEQ_SET_PLANE1 0x0e 146 #define DOC_SEQ_SET_PLANE2 0x10 147 #define DOC_SEQ_PAGE_SETUP 0x1d 148 #define DOC_SEQ_ERASE 0x27 149 #define DOC_SEQ_PLANES_STATUS 0x31 150 151 /* 152 * Flash commands 153 */ 154 #define DOC_CMD_READ_PLANE1 0x00 155 #define DOC_CMD_SET_ADDR_READ 0x05 156 #define DOC_CMD_READ_ALL_PLANES 0x30 157 #define DOC_CMD_READ_PLANE2 0x50 158 #define DOC_CMD_READ_FLASH 0xe0 159 #define DOC_CMD_PAGE_SIZE_532 0x3c 160 161 #define DOC_CMD_PROG_BLOCK_ADDR 0x60 162 #define DOC_CMD_PROG_CYCLE1 0x80 163 #define DOC_CMD_PROG_CYCLE2 0x10 164 #define DOC_CMD_PROG_CYCLE3 0x11 165 #define DOC_CMD_ERASECYCLE2 0xd0 166 #define DOC_CMD_READ_STATUS 0x70 167 #define DOC_CMD_PLANES_STATUS 0x71 168 169 #define DOC_CMD_RELIABLE_MODE 0x22 170 #define DOC_CMD_FAST_MODE 0xa2 171 172 #define DOC_CMD_RESET 0xff 173 174 /* 175 * Flash register : DOC_FLASHCONTROL 176 */ 177 #define DOC_CTRL_VIOLATION 0x20 178 #define DOC_CTRL_CE 0x10 179 #define DOC_CTRL_UNKNOWN_BITS 0x08 180 #define DOC_CTRL_PROTECTION_ERROR 0x04 181 #define DOC_CTRL_SEQUENCE_ERROR 0x02 182 #define DOC_CTRL_FLASHREADY 0x01 183 184 /* 185 * Flash register : DOC_ASICMODE 186 */ 187 #define DOC_ASICMODE_RESET 0x00 188 #define DOC_ASICMODE_NORMAL 0x01 189 #define DOC_ASICMODE_POWERDOWN 0x02 190 #define DOC_ASICMODE_MDWREN 0x04 191 #define DOC_ASICMODE_BDETCT_RESET 0x08 192 #define DOC_ASICMODE_RSTIN_RESET 0x10 193 #define DOC_ASICMODE_RAM_WE 0x20 194 195 /* 196 * Flash register : DOC_ECCCONF0 197 */ 198 #define DOC_ECCCONF0_WRITE_MODE 0x0000 199 #define DOC_ECCCONF0_READ_MODE 0x8000 200 #define DOC_ECCCONF0_AUTO_ECC_ENABLE 0x4000 201 #define DOC_ECCCONF0_HAMMING_ENABLE 0x1000 202 #define DOC_ECCCONF0_BCH_ENABLE 0x0800 203 #define DOC_ECCCONF0_DATA_BYTES_MASK 0x07ff 204 205 /* 206 * Flash register : DOC_ECCCONF1 207 */ 208 #define DOC_ECCCONF1_BCH_SYNDROM_ERR 0x80 209 #define DOC_ECCCONF1_UNKOWN1 0x40 210 #define DOC_ECCCONF1_PAGE_IS_WRITTEN 0x20 211 #define DOC_ECCCONF1_UNKOWN3 0x10 212 #define DOC_ECCCONF1_HAMMING_BITS_MASK 0x0f 213 214 /* 215 * Flash register : DOC_PROTECTION 216 */ 217 #define DOC_PROTECT_FOUNDRY_OTP_LOCK 0x01 218 #define DOC_PROTECT_CUSTOMER_OTP_LOCK 0x02 219 #define DOC_PROTECT_LOCK_INPUT 0x04 220 #define DOC_PROTECT_STICKY_LOCK 0x08 221 #define DOC_PROTECT_PROTECTION_ENABLED 0x10 222 #define DOC_PROTECT_IPL_DOWNLOAD_LOCK 0x20 223 #define DOC_PROTECT_PROTECTION_ERROR 0x80 224 225 /* 226 * Flash register : DOC_DPS0_STATUS and DOC_DPS1_STATUS 227 */ 228 #define DOC_DPS_OTP_PROTECTED 0x01 229 #define DOC_DPS_READ_PROTECTED 0x02 230 #define DOC_DPS_WRITE_PROTECTED 0x04 231 #define DOC_DPS_HW_LOCK_ENABLED 0x08 232 #define DOC_DPS_KEY_OK 0x80 233 234 /* 235 * Flash register : DOC_CONFIGURATION 236 */ 237 #define DOC_CONF_IF_CFG 0x80 238 #define DOC_CONF_MAX_ID_MASK 0x30 239 #define DOC_CONF_VCCQ_3V 0x01 240 241 /* 242 * Flash register : DOC_READADDRESS 243 */ 244 #define DOC_READADDR_INC 0x8000 245 #define DOC_READADDR_ONE_BYTE 0x4000 246 #define DOC_READADDR_ADDR_MASK 0x1fff 247 248 /* 249 * Flash register : DOC_POWERMODE 250 */ 251 #define DOC_POWERDOWN_READY 0x80 252 253 /* 254 * Status of erase and write operation 255 */ 256 #define DOC_PLANES_STATUS_FAIL 0x01 257 #define DOC_PLANES_STATUS_PLANE0_KO 0x02 258 #define DOC_PLANES_STATUS_PLANE1_KO 0x04 259 260 /* 261 * DPS key management 262 * 263 * Each floor of docg3 has 2 protection areas: DPS0 and DPS1. These areas span 264 * across block boundaries, and define whether these blocks can be read or 265 * written. 266 * The definition is dynamically stored in page 0 of blocks (2,3) for DPS0, and 267 * page 0 of blocks (4,5) for DPS1. 268 */ 269 #define DOC_LAYOUT_DPS_KEY_LENGTH 8 270 271 /** 272 * struct docg3_cascade - Cascade of 1 to 4 docg3 chips 273 * @floors: floors (ie. one physical docg3 chip is one floor) 274 * @base: IO space to access all chips in the cascade 275 * @bch: the BCH correcting control structure 276 * @lock: lock to protect docg3 IO space from concurrent accesses 277 */ 278 struct docg3_cascade { 279 struct mtd_info *floors[DOC_MAX_NBFLOORS]; 280 void __iomem *base; 281 struct bch_control *bch; 282 struct mutex lock; 283 }; 284 285 /** 286 * struct docg3 - DiskOnChip driver private data 287 * @dev: the device currently under control 288 * @cascade: the cascade this device belongs to 289 * @device_id: number of the cascaded DoCG3 device (0, 1, 2 or 3) 290 * @if_cfg: if true, reads are on 16bits, else reads are on 8bits 291 292 * @reliable: if 0, docg3 in normal mode, if 1 docg3 in fast mode, if 2 in 293 * reliable mode 294 * Fast mode implies more errors than normal mode. 295 * Reliable mode implies that page 2*n and 2*n+1 are clones. 296 * @bbt: bad block table cache 297 * @oob_write_ofs: offset of the MTD where this OOB should belong (ie. in next 298 * page_write) 299 * @oob_autoecc: if 1, use only bytes 0-7, 15, and fill the others with HW ECC 300 * if 0, use all the 16 bytes. 301 * @oob_write_buf: prepared OOB for next page_write 302 */ 303 struct docg3 { 304 struct device *dev; 305 struct docg3_cascade *cascade; 306 unsigned int device_id:4; 307 unsigned int if_cfg:1; 308 unsigned int reliable:2; 309 int max_block; 310 u8 *bbt; 311 loff_t oob_write_ofs; 312 int oob_autoecc; 313 u8 oob_write_buf[DOC_LAYOUT_OOB_SIZE]; 314 }; 315 316 #define doc_err(fmt, arg...) dev_err(docg3->dev, (fmt), ## arg) 317 #define doc_info(fmt, arg...) dev_info(docg3->dev, (fmt), ## arg) 318 #define doc_dbg(fmt, arg...) dev_dbg(docg3->dev, (fmt), ## arg) 319 #define doc_vdbg(fmt, arg...) dev_vdbg(docg3->dev, (fmt), ## arg) 320 #endif 321 322 /* 323 * Trace events part 324 */ 325 #undef TRACE_SYSTEM 326 #define TRACE_SYSTEM docg3 327 328 #if !defined(_MTD_DOCG3_TRACE) || defined(TRACE_HEADER_MULTI_READ) 329 #define _MTD_DOCG3_TRACE 330 331 #include <linux/tracepoint.h> 332 333 TRACE_EVENT(docg3_io, 334 TP_PROTO(int op, int width, u16 reg, int val), 335 TP_ARGS(op, width, reg, val), 336 TP_STRUCT__entry( 337 __field(int, op) 338 __field(unsigned char, width) 339 __field(u16, reg) 340 __field(int, val)), 341 TP_fast_assign( 342 __entry->op = op; 343 __entry->width = width; 344 __entry->reg = reg; 345 __entry->val = val;), 346 TP_printk("docg3: %s%02d reg=%04x, val=%04x", 347 __entry->op ? "write" : "read", __entry->width, 348 __entry->reg, __entry->val) 349 ); 350 #endif 351 352 /* This part must be outside protection */ 353 #undef TRACE_INCLUDE_PATH 354 #undef TRACE_INCLUDE_FILE 355 #define TRACE_INCLUDE_PATH . 356 #define TRACE_INCLUDE_FILE docg3 357 #include <trace/define_trace.h> 358