1menu "Self-contained MTD device drivers" 2 depends on MTD!=n 3 depends on HAS_IOMEM 4 5config MTD_PMC551 6 tristate "Ramix PMC551 PCI Mezzanine RAM card support" 7 depends on PCI 8 ---help--- 9 This provides a MTD device driver for the Ramix PMC551 RAM PCI card 10 from Ramix Inc. <http://www.ramix.com/products/memory/pmc551.html>. 11 These devices come in memory configurations from 32M - 1G. If you 12 have one, you probably want to enable this. 13 14 If this driver is compiled as a module you get the ability to select 15 the size of the aperture window pointing into the devices memory. 16 What this means is that if you have a 1G card, normally the kernel 17 will use a 1G memory map as its view of the device. As a module, 18 you can select a 1M window into the memory and the driver will 19 "slide" the window around the PMC551's memory. This was 20 particularly useful on the 2.2 kernels on PPC architectures as there 21 was limited kernel space to deal with. 22 23config MTD_PMC551_BUGFIX 24 bool "PMC551 256M DRAM Bugfix" 25 depends on MTD_PMC551 26 help 27 Some of Ramix's PMC551 boards with 256M configurations have invalid 28 column and row mux values. This option will fix them, but will 29 break other memory configurations. If unsure say N. 30 31config MTD_PMC551_DEBUG 32 bool "PMC551 Debugging" 33 depends on MTD_PMC551 34 help 35 This option makes the PMC551 more verbose during its operation and 36 is only really useful if you are developing on this driver or 37 suspect a possible hardware or driver bug. If unsure say N. 38 39config MTD_MS02NV 40 tristate "DEC MS02-NV NVRAM module support" 41 depends on MACH_DECSTATION 42 help 43 This is an MTD driver for the DEC's MS02-NV (54-20948-01) battery 44 backed-up NVRAM module. The module was originally meant as an NFS 45 accelerator. Say Y here if you have a DECstation 5000/2x0 or a 46 DECsystem 5900 equipped with such a module. 47 48 If you want to compile this driver as a module ( = code which can be 49 inserted in and removed from the running kernel whenever you want), 50 say M here and read <file:Documentation/kbuild/modules.txt>. 51 The module will be called ms02-nv. 52 53config MTD_DATAFLASH 54 tristate "Support for AT45xxx DataFlash" 55 depends on SPI_MASTER 56 help 57 This enables access to AT45xxx DataFlash chips, using SPI. 58 Sometimes DataFlash chips are packaged inside MMC-format 59 cards; at this writing, the MMC stack won't handle those. 60 61config MTD_DATAFLASH_WRITE_VERIFY 62 bool "Verify DataFlash page writes" 63 depends on MTD_DATAFLASH 64 help 65 This adds an extra check when data is written to the flash. 66 It may help if you are verifying chip setup (timings etc) on 67 your board. There is a rare possibility that even though the 68 device thinks the write was successful, a bit could have been 69 flipped accidentally due to device wear or something else. 70 71config MTD_DATAFLASH_OTP 72 bool "DataFlash OTP support (Security Register)" 73 depends on MTD_DATAFLASH 74 help 75 Newer DataFlash chips (revisions C and D) support 128 bytes of 76 one-time-programmable (OTP) data. The first half may be written 77 (once) with up to 64 bytes of data, such as a serial number or 78 other key product data. The second half is programmed with a 79 unique-to-each-chip bit pattern at the factory. 80 81config MTD_M25P80 82 tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)" 83 depends on SPI_MASTER && MTD_SPI_NOR 84 select SPI_MEM 85 help 86 This enables access to most modern SPI flash chips, used for 87 program and data storage. Series supported include Atmel AT26DF, 88 Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips 89 are supported as well. See the driver source for the current list, 90 or to add other chips. 91 92 Note that the original DataFlash chips (AT45 series, not AT26DF), 93 need an entirely different driver. 94 95 Set up your spi devices with the right board-specific platform data, 96 if you want to specify device partitioning or to use a device which 97 doesn't support the JEDEC ID instruction. 98 99config MTD_MCHP23K256 100 tristate "Microchip 23K256 SRAM" 101 depends on SPI_MASTER 102 help 103 This enables access to Microchip 23K256 SRAM chips, using SPI. 104 105 Set up your spi devices with the right board-specific 106 platform data, or a device tree description if you want to 107 specify device partitioning 108 109config MTD_SPEAR_SMI 110 tristate "SPEAR MTD NOR Support through SMI controller" 111 depends on PLAT_SPEAR 112 default y 113 help 114 This enable SNOR support on SPEAR platforms using SMI controller 115 116config MTD_SST25L 117 tristate "Support SST25L (non JEDEC) SPI Flash chips" 118 depends on SPI_MASTER 119 help 120 This enables access to the non JEDEC SST25L SPI flash chips, used 121 for program and data storage. 122 123 Set up your spi devices with the right board-specific platform data, 124 if you want to specify device partitioning. 125 126config MTD_BCM47XXSFLASH 127 tristate "Support for serial flash on BCMA bus" 128 depends on BCMA_SFLASH && (MIPS || ARM) 129 help 130 BCMA bus can have various flash memories attached, they are 131 registered by bcma as platform devices. This enables driver for 132 serial flash memories. 133 134config MTD_SLRAM 135 tristate "Uncached system RAM" 136 help 137 If your CPU cannot cache all of the physical memory in your machine, 138 you can still use it for storage or swap by using this driver to 139 present it to the system as a Memory Technology Device. 140 141config MTD_PHRAM 142 tristate "Physical system RAM" 143 help 144 This is a re-implementation of the slram driver above. 145 146 Use this driver to access physical memory that the kernel proper 147 doesn't have access to, memory beyond the mem=xxx limit, nvram, 148 memory on the video card, etc... 149 150config MTD_LART 151 tristate "28F160xx flash driver for LART" 152 depends on SA1100_LART 153 help 154 This enables the flash driver for LART. Please note that you do 155 not need any mapping/chip driver for LART. This one does it all 156 for you, so go disable all of those if you enabled some of them (: 157 158config MTD_MTDRAM 159 tristate "Test driver using RAM" 160 help 161 This enables a test MTD device driver which uses vmalloc() to 162 provide storage. You probably want to say 'N' unless you're 163 testing stuff. 164 165config MTDRAM_TOTAL_SIZE 166 int "MTDRAM device size in KiB" 167 depends on MTD_MTDRAM 168 default "4096" 169 help 170 This allows you to configure the total size of the MTD device 171 emulated by the MTDRAM driver. If the MTDRAM driver is built 172 as a module, it is also possible to specify this as a parameter when 173 loading the module. 174 175config MTDRAM_ERASE_SIZE 176 int "MTDRAM erase block size in KiB" 177 depends on MTD_MTDRAM 178 default "128" 179 help 180 This allows you to configure the size of the erase blocks in the 181 device emulated by the MTDRAM driver. If the MTDRAM driver is built 182 as a module, it is also possible to specify this as a parameter when 183 loading the module. 184 185config MTD_BLOCK2MTD 186 tristate "MTD using block device" 187 depends on BLOCK 188 help 189 This driver allows a block device to appear as an MTD. It would 190 generally be used in the following cases: 191 192 Using Compact Flash as an MTD, these usually present themselves to 193 the system as an ATA drive. 194 Testing MTD users (eg JFFS2) on large media and media that might 195 be removed during a write (using the floppy drive). 196 197config MTD_POWERNV_FLASH 198 tristate "powernv flash MTD driver" 199 depends on PPC_POWERNV 200 help 201 This provides an MTD device to access flash on powernv OPAL 202 platforms from Linux. This device abstracts away the 203 firmware interface for flash access. 204 205comment "Disk-On-Chip Device Drivers" 206 207config MTD_DOCG3 208 tristate "M-Systems Disk-On-Chip G3" 209 select BCH 210 select BCH_CONST_PARAMS 211 select BITREVERSE 212 ---help--- 213 This provides an MTD device driver for the M-Systems DiskOnChip 214 G3 devices. 215 216 The driver provides access to G3 DiskOnChip, distributed by 217 M-Systems and now Sandisk. The support is very experimental, 218 and doesn't give access to any write operations. 219 220config MTD_ST_SPI_FSM 221 tristate "ST Microelectronics SPI FSM Serial Flash Controller" 222 depends on ARCH_STI 223 help 224 This provides an MTD device driver for the ST Microelectronics 225 SPI Fast Sequence Mode (FSM) Serial Flash Controller and support 226 for a subset of connected Serial Flash devices. 227 228if MTD_DOCG3 229config BCH_CONST_M 230 default 14 231config BCH_CONST_T 232 default 4 233endif 234 235endmenu 236