1menu "Self-contained MTD device drivers" 2 depends on MTD!=n 3 depends on HAS_IOMEM 4 5config MTD_PMC551 6 tristate "Ramix PMC551 PCI Mezzanine RAM card support" 7 depends on PCI 8 ---help--- 9 This provides a MTD device driver for the Ramix PMC551 RAM PCI card 10 from Ramix Inc. <http://www.ramix.com/products/memory/pmc551.html>. 11 These devices come in memory configurations from 32M - 1G. If you 12 have one, you probably want to enable this. 13 14 If this driver is compiled as a module you get the ability to select 15 the size of the aperture window pointing into the devices memory. 16 What this means is that if you have a 1G card, normally the kernel 17 will use a 1G memory map as its view of the device. As a module, 18 you can select a 1M window into the memory and the driver will 19 "slide" the window around the PMC551's memory. This was 20 particularly useful on the 2.2 kernels on PPC architectures as there 21 was limited kernel space to deal with. 22 23config MTD_PMC551_BUGFIX 24 bool "PMC551 256M DRAM Bugfix" 25 depends on MTD_PMC551 26 help 27 Some of Ramix's PMC551 boards with 256M configurations have invalid 28 column and row mux values. This option will fix them, but will 29 break other memory configurations. If unsure say N. 30 31config MTD_PMC551_DEBUG 32 bool "PMC551 Debugging" 33 depends on MTD_PMC551 34 help 35 This option makes the PMC551 more verbose during its operation and 36 is only really useful if you are developing on this driver or 37 suspect a possible hardware or driver bug. If unsure say N. 38 39config MTD_MS02NV 40 tristate "DEC MS02-NV NVRAM module support" 41 depends on MACH_DECSTATION 42 help 43 This is an MTD driver for the DEC's MS02-NV (54-20948-01) battery 44 backed-up NVRAM module. The module was originally meant as an NFS 45 accelerator. Say Y here if you have a DECstation 5000/2x0 or a 46 DECsystem 5900 equipped with such a module. 47 48 If you want to compile this driver as a module ( = code which can be 49 inserted in and removed from the running kernel whenever you want), 50 say M here and read <file:Documentation/kbuild/modules.txt>. 51 The module will be called ms02-nv. 52 53config MTD_DATAFLASH 54 tristate "Support for AT45xxx DataFlash" 55 depends on SPI_MASTER 56 help 57 This enables access to AT45xxx DataFlash chips, using SPI. 58 Sometimes DataFlash chips are packaged inside MMC-format 59 cards; at this writing, the MMC stack won't handle those. 60 61config MTD_DATAFLASH_WRITE_VERIFY 62 bool "Verify DataFlash page writes" 63 depends on MTD_DATAFLASH 64 help 65 This adds an extra check when data is written to the flash. 66 It may help if you are verifying chip setup (timings etc) on 67 your board. There is a rare possibility that even though the 68 device thinks the write was successful, a bit could have been 69 flipped accidentally due to device wear or something else. 70 71config MTD_DATAFLASH_OTP 72 bool "DataFlash OTP support (Security Register)" 73 depends on MTD_DATAFLASH 74 help 75 Newer DataFlash chips (revisions C and D) support 128 bytes of 76 one-time-programmable (OTP) data. The first half may be written 77 (once) with up to 64 bytes of data, such as a serial number or 78 other key product data. The second half is programmed with a 79 unique-to-each-chip bit pattern at the factory. 80 81config MTD_M25P80 82 tristate "Support most SPI Flash chips (AT26DF, M25P, W25X, ...)" 83 depends on SPI_MASTER && MTD_SPI_NOR 84 help 85 This enables access to most modern SPI flash chips, used for 86 program and data storage. Series supported include Atmel AT26DF, 87 Spansion S25SL, SST 25VF, ST M25P, and Winbond W25X. Other chips 88 are supported as well. See the driver source for the current list, 89 or to add other chips. 90 91 Note that the original DataFlash chips (AT45 series, not AT26DF), 92 need an entirely different driver. 93 94 Set up your spi devices with the right board-specific platform data, 95 if you want to specify device partitioning or to use a device which 96 doesn't support the JEDEC ID instruction. 97 98config MTD_SPEAR_SMI 99 tristate "SPEAR MTD NOR Support through SMI controller" 100 depends on PLAT_SPEAR 101 default y 102 help 103 This enable SNOR support on SPEAR platforms using SMI controller 104 105config MTD_SST25L 106 tristate "Support SST25L (non JEDEC) SPI Flash chips" 107 depends on SPI_MASTER 108 help 109 This enables access to the non JEDEC SST25L SPI flash chips, used 110 for program and data storage. 111 112 Set up your spi devices with the right board-specific platform data, 113 if you want to specify device partitioning. 114 115config MTD_BCM47XXSFLASH 116 tristate "Support for serial flash on BCMA bus" 117 depends on BCMA_SFLASH && (MIPS || ARM) 118 help 119 BCMA bus can have various flash memories attached, they are 120 registered by bcma as platform devices. This enables driver for 121 serial flash memories. 122 123config MTD_SLRAM 124 tristate "Uncached system RAM" 125 help 126 If your CPU cannot cache all of the physical memory in your machine, 127 you can still use it for storage or swap by using this driver to 128 present it to the system as a Memory Technology Device. 129 130config MTD_PHRAM 131 tristate "Physical system RAM" 132 help 133 This is a re-implementation of the slram driver above. 134 135 Use this driver to access physical memory that the kernel proper 136 doesn't have access to, memory beyond the mem=xxx limit, nvram, 137 memory on the video card, etc... 138 139config MTD_LART 140 tristate "28F160xx flash driver for LART" 141 depends on SA1100_LART 142 help 143 This enables the flash driver for LART. Please note that you do 144 not need any mapping/chip driver for LART. This one does it all 145 for you, so go disable all of those if you enabled some of them (: 146 147config MTD_MTDRAM 148 tristate "Test driver using RAM" 149 help 150 This enables a test MTD device driver which uses vmalloc() to 151 provide storage. You probably want to say 'N' unless you're 152 testing stuff. 153 154config MTDRAM_TOTAL_SIZE 155 int "MTDRAM device size in KiB" 156 depends on MTD_MTDRAM 157 default "4096" 158 help 159 This allows you to configure the total size of the MTD device 160 emulated by the MTDRAM driver. If the MTDRAM driver is built 161 as a module, it is also possible to specify this as a parameter when 162 loading the module. 163 164config MTDRAM_ERASE_SIZE 165 int "MTDRAM erase block size in KiB" 166 depends on MTD_MTDRAM 167 default "128" 168 help 169 This allows you to configure the size of the erase blocks in the 170 device emulated by the MTDRAM driver. If the MTDRAM driver is built 171 as a module, it is also possible to specify this as a parameter when 172 loading the module. 173 174config MTD_BLOCK2MTD 175 tristate "MTD using block device" 176 depends on BLOCK 177 help 178 This driver allows a block device to appear as an MTD. It would 179 generally be used in the following cases: 180 181 Using Compact Flash as an MTD, these usually present themselves to 182 the system as an ATA drive. 183 Testing MTD users (eg JFFS2) on large media and media that might 184 be removed during a write (using the floppy drive). 185 186config MTD_POWERNV_FLASH 187 tristate "powernv flash MTD driver" 188 depends on PPC_POWERNV 189 help 190 This provides an MTD device to access flash on powernv OPAL 191 platforms from Linux. This device abstracts away the 192 firmware interface for flash access. 193 194comment "Disk-On-Chip Device Drivers" 195 196config MTD_DOCG3 197 tristate "M-Systems Disk-On-Chip G3" 198 select BCH 199 select BCH_CONST_PARAMS 200 select BITREVERSE 201 ---help--- 202 This provides an MTD device driver for the M-Systems DiskOnChip 203 G3 devices. 204 205 The driver provides access to G3 DiskOnChip, distributed by 206 M-Systems and now Sandisk. The support is very experimental, 207 and doesn't give access to any write operations. 208 209config MTD_ST_SPI_FSM 210 tristate "ST Microelectronics SPI FSM Serial Flash Controller" 211 depends on ARCH_STI 212 help 213 This provides an MTD device driver for the ST Microelectronics 214 SPI Fast Sequence Mode (FSM) Serial Flash Controller and support 215 for a subset of connected Serial Flash devices. 216 217if MTD_DOCG3 218config BCH_CONST_M 219 default 14 220config BCH_CONST_T 221 default 4 222endif 223 224endmenu 225