1# SPDX-License-Identifier: GPL-2.0-only 2menu "Self-contained MTD device drivers" 3 depends on MTD!=n 4 depends on HAS_IOMEM 5 6config MTD_PMC551 7 tristate "Ramix PMC551 PCI Mezzanine RAM card support" 8 depends on PCI 9 help 10 This provides a MTD device driver for the Ramix PMC551 RAM PCI card 11 from Ramix Inc. <http://www.ramix.com/products/memory/pmc551.html>. 12 These devices come in memory configurations from 32M - 1G. If you 13 have one, you probably want to enable this. 14 15 If this driver is compiled as a module you get the ability to select 16 the size of the aperture window pointing into the devices memory. 17 What this means is that if you have a 1G card, normally the kernel 18 will use a 1G memory map as its view of the device. As a module, 19 you can select a 1M window into the memory and the driver will 20 "slide" the window around the PMC551's memory. This was 21 particularly useful on the 2.2 kernels on PPC architectures as there 22 was limited kernel space to deal with. 23 24config MTD_PMC551_BUGFIX 25 bool "PMC551 256M DRAM Bugfix" 26 depends on MTD_PMC551 27 help 28 Some of Ramix's PMC551 boards with 256M configurations have invalid 29 column and row mux values. This option will fix them, but will 30 break other memory configurations. If unsure say N. 31 32config MTD_PMC551_DEBUG 33 bool "PMC551 Debugging" 34 depends on MTD_PMC551 35 help 36 This option makes the PMC551 more verbose during its operation and 37 is only really useful if you are developing on this driver or 38 suspect a possible hardware or driver bug. If unsure say N. 39 40config MTD_MS02NV 41 tristate "DEC MS02-NV NVRAM module support" 42 depends on MACH_DECSTATION 43 help 44 This is an MTD driver for the DEC's MS02-NV (54-20948-01) battery 45 backed-up NVRAM module. The module was originally meant as an NFS 46 accelerator. Say Y here if you have a DECstation 5000/2x0 or a 47 DECsystem 5900 equipped with such a module. 48 49 If you want to compile this driver as a module ( = code which can be 50 inserted in and removed from the running kernel whenever you want), 51 say M here and read <file:Documentation/kbuild/modules.rst>. 52 The module will be called ms02-nv. 53 54config MTD_DATAFLASH 55 tristate "Support for AT45xxx DataFlash" 56 depends on SPI_MASTER 57 help 58 This enables access to AT45xxx DataFlash chips, using SPI. 59 Sometimes DataFlash chips are packaged inside MMC-format 60 cards; at this writing, the MMC stack won't handle those. 61 62config MTD_DATAFLASH_WRITE_VERIFY 63 bool "Verify DataFlash page writes" 64 depends on MTD_DATAFLASH 65 help 66 This adds an extra check when data is written to the flash. 67 It may help if you are verifying chip setup (timings etc) on 68 your board. There is a rare possibility that even though the 69 device thinks the write was successful, a bit could have been 70 flipped accidentally due to device wear or something else. 71 72config MTD_DATAFLASH_OTP 73 bool "DataFlash OTP support (Security Register)" 74 depends on MTD_DATAFLASH 75 help 76 Newer DataFlash chips (revisions C and D) support 128 bytes of 77 one-time-programmable (OTP) data. The first half may be written 78 (once) with up to 64 bytes of data, such as a serial number or 79 other key product data. The second half is programmed with a 80 unique-to-each-chip bit pattern at the factory. 81 82config MTD_MCHP23K256 83 tristate "Microchip 23K256 SRAM" 84 depends on SPI_MASTER 85 help 86 This enables access to Microchip 23K256 SRAM chips, using SPI. 87 88 Set up your spi devices with the right board-specific 89 platform data, or a device tree description if you want to 90 specify device partitioning 91 92config MTD_SPEAR_SMI 93 tristate "SPEAR MTD NOR Support through SMI controller" 94 depends on PLAT_SPEAR 95 default y 96 help 97 This enable SNOR support on SPEAR platforms using SMI controller 98 99config MTD_SST25L 100 tristate "Support SST25L (non JEDEC) SPI Flash chips" 101 depends on SPI_MASTER 102 help 103 This enables access to the non JEDEC SST25L SPI flash chips, used 104 for program and data storage. 105 106 Set up your spi devices with the right board-specific platform data, 107 if you want to specify device partitioning. 108 109config MTD_BCM47XXSFLASH 110 tristate "Support for serial flash on BCMA bus" 111 depends on BCMA_SFLASH && (MIPS || ARM) 112 help 113 BCMA bus can have various flash memories attached, they are 114 registered by bcma as platform devices. This enables driver for 115 serial flash memories. 116 117config MTD_SLRAM 118 tristate "Uncached system RAM" 119 help 120 If your CPU cannot cache all of the physical memory in your machine, 121 you can still use it for storage or swap by using this driver to 122 present it to the system as a Memory Technology Device. 123 124config MTD_PHRAM 125 tristate "Physical system RAM" 126 help 127 This is a re-implementation of the slram driver above. 128 129 Use this driver to access physical memory that the kernel proper 130 doesn't have access to, memory beyond the mem=xxx limit, nvram, 131 memory on the video card, etc... 132 133config MTD_LART 134 tristate "28F160xx flash driver for LART" 135 depends on SA1100_LART 136 help 137 This enables the flash driver for LART. Please note that you do 138 not need any mapping/chip driver for LART. This one does it all 139 for you, so go disable all of those if you enabled some of them (: 140 141config MTD_MTDRAM 142 tristate "Test driver using RAM" 143 help 144 This enables a test MTD device driver which uses vmalloc() to 145 provide storage. You probably want to say 'N' unless you're 146 testing stuff. 147 148config MTDRAM_TOTAL_SIZE 149 int "MTDRAM device size in KiB" 150 depends on MTD_MTDRAM 151 default "4096" 152 help 153 This allows you to configure the total size of the MTD device 154 emulated by the MTDRAM driver. If the MTDRAM driver is built 155 as a module, it is also possible to specify this as a parameter when 156 loading the module. 157 158config MTDRAM_ERASE_SIZE 159 int "MTDRAM erase block size in KiB" 160 depends on MTD_MTDRAM 161 default "128" 162 help 163 This allows you to configure the size of the erase blocks in the 164 device emulated by the MTDRAM driver. If the MTDRAM driver is built 165 as a module, it is also possible to specify this as a parameter when 166 loading the module. 167 168config MTD_BLOCK2MTD 169 tristate "MTD using block device" 170 depends on BLOCK 171 help 172 This driver allows a block device to appear as an MTD. It would 173 generally be used in the following cases: 174 175 Using Compact Flash as an MTD, these usually present themselves to 176 the system as an ATA drive. 177 Testing MTD users (eg JFFS2) on large media and media that might 178 be removed during a write (using the floppy drive). 179 180config MTD_POWERNV_FLASH 181 tristate "powernv flash MTD driver" 182 depends on PPC_POWERNV 183 help 184 This provides an MTD device to access flash on powernv OPAL 185 platforms from Linux. This device abstracts away the 186 firmware interface for flash access. 187 188comment "Disk-On-Chip Device Drivers" 189 190config MTD_DOCG3 191 tristate "M-Systems Disk-On-Chip G3" 192 select BCH 193 select BCH_CONST_PARAMS if !MTD_NAND_ECC_SW_BCH 194 select BITREVERSE 195 help 196 This provides an MTD device driver for the M-Systems DiskOnChip 197 G3 devices. 198 199 The driver provides access to G3 DiskOnChip, distributed by 200 M-Systems and now Sandisk. The support is very experimental, 201 and doesn't give access to any write operations. 202 203config MTD_ST_SPI_FSM 204 tristate "ST Microelectronics SPI FSM Serial Flash Controller" 205 depends on ARCH_STI 206 help 207 This provides an MTD device driver for the ST Microelectronics 208 SPI Fast Sequence Mode (FSM) Serial Flash Controller and support 209 for a subset of connected Serial Flash devices. 210 211if MTD_DOCG3 212config BCH_CONST_M 213 default 14 214config BCH_CONST_T 215 default 4 216endif 217 218endmenu 219