1menuconfig MTD 2 tristate "Memory Technology Device (MTD) support" 3 help 4 Memory Technology Devices are flash, RAM and similar chips, often 5 used for solid state file systems on embedded devices. This option 6 will provide the generic support for MTD drivers to register 7 themselves with the kernel and for potential users of MTD devices 8 to enumerate the devices which are present and obtain a handle on 9 them. It will also allow you to select individual drivers for 10 particular hardware and users of MTD devices. If unsure, say N. 11 12if MTD 13 14config MTD_TESTS 15 tristate "MTD tests support (DANGEROUS)" 16 depends on m 17 help 18 This option includes various MTD tests into compilation. The tests 19 should normally be compiled as kernel modules. The modules perform 20 various checks and verifications when loaded. 21 22 WARNING: some of the tests will ERASE entire MTD device which they 23 test. Do not use these tests unless you really know what you do. 24 25config MTD_REDBOOT_PARTS 26 tristate "RedBoot partition table parsing" 27 ---help--- 28 RedBoot is a ROM monitor and bootloader which deals with multiple 29 'images' in flash devices by putting a table one of the erase 30 blocks on the device, similar to a partition table, which gives 31 the offsets, lengths and names of all the images stored in the 32 flash. 33 34 If you need code which can detect and parse this table, and register 35 MTD 'partitions' corresponding to each image in the table, enable 36 this option. 37 38 You will still need the parsing functions to be called by the driver 39 for your particular device. It won't happen automatically. The 40 SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for 41 example. 42 43if MTD_REDBOOT_PARTS 44 45config MTD_REDBOOT_DIRECTORY_BLOCK 46 int "Location of RedBoot partition table" 47 default "-1" 48 ---help--- 49 This option is the Linux counterpart to the 50 CYGNUM_REDBOOT_FIS_DIRECTORY_BLOCK RedBoot compile time 51 option. 52 53 The option specifies which Flash sectors holds the RedBoot 54 partition table. A zero or positive value gives an absolute 55 erase block number. A negative value specifies a number of 56 sectors before the end of the device. 57 58 For example "2" means block number 2, "-1" means the last 59 block and "-2" means the penultimate block. 60 61config MTD_REDBOOT_PARTS_UNALLOCATED 62 bool "Include unallocated flash regions" 63 help 64 If you need to register each unallocated flash region as a MTD 65 'partition', enable this option. 66 67config MTD_REDBOOT_PARTS_READONLY 68 bool "Force read-only for RedBoot system images" 69 help 70 If you need to force read-only for 'RedBoot', 'RedBoot Config' and 71 'FIS directory' images, enable this option. 72 73endif # MTD_REDBOOT_PARTS 74 75config MTD_CMDLINE_PARTS 76 tristate "Command line partition table parsing" 77 depends on MTD 78 ---help--- 79 Allow generic configuration of the MTD partition tables via the kernel 80 command line. Multiple flash resources are supported for hardware where 81 different kinds of flash memory are available. 82 83 You will still need the parsing functions to be called by the driver 84 for your particular device. It won't happen automatically. The 85 SA1100 map driver (CONFIG_MTD_SA1100) has an option for this, for 86 example. 87 88 The format for the command line is as follows: 89 90 mtdparts=<mtddef>[;<mtddef] 91 <mtddef> := <mtd-id>:<partdef>[,<partdef>] 92 <partdef> := <size>[@offset][<name>][ro] 93 <mtd-id> := unique id used in mapping driver/device 94 <size> := standard linux memsize OR "-" to denote all 95 remaining space 96 <name> := (NAME) 97 98 Due to the way Linux handles the command line, no spaces are 99 allowed in the partition definition, including mtd id's and partition 100 names. 101 102 Examples: 103 104 1 flash resource (mtd-id "sa1100"), with 1 single writable partition: 105 mtdparts=sa1100:- 106 107 Same flash, but 2 named partitions, the first one being read-only: 108 mtdparts=sa1100:256k(ARMboot)ro,-(root) 109 110 If unsure, say 'N'. 111 112config MTD_AFS_PARTS 113 tristate "ARM Firmware Suite partition parsing" 114 depends on (ARM || ARM64) 115 ---help--- 116 The ARM Firmware Suite allows the user to divide flash devices into 117 multiple 'images'. Each such image has a header containing its name 118 and offset/size etc. 119 120 If you need code which can detect and parse these tables, and 121 register MTD 'partitions' corresponding to each image detected, 122 enable this option. 123 124 You will still need the parsing functions to be called by the driver 125 for your particular device. It won't happen automatically. The 126 'physmap' map driver (CONFIG_MTD_PHYSMAP) does this, for example. 127 128config MTD_OF_PARTS 129 tristate "OpenFirmware partitioning information support" 130 default y 131 depends on OF 132 help 133 This provides a partition parsing function which derives 134 the partition map from the children of the flash node, 135 as described in Documentation/devicetree/bindings/mtd/partition.txt. 136 137config MTD_AR7_PARTS 138 tristate "TI AR7 partitioning support" 139 ---help--- 140 TI AR7 partitioning support 141 142config MTD_BCM63XX_PARTS 143 tristate "BCM63XX CFE partitioning support" 144 depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST 145 select CRC32 146 help 147 This provides partions parsing for BCM63xx devices with CFE 148 bootloaders. 149 150config MTD_BCM47XX_PARTS 151 tristate "BCM47XX partitioning support" 152 depends on BCM47XX || ARCH_BCM_5301X 153 help 154 This provides partitions parser for devices based on BCM47xx 155 boards. 156 157menu "Partition parsers" 158source "drivers/mtd/parsers/Kconfig" 159endmenu 160 161comment "User Modules And Translation Layers" 162 163# 164# MTD block device support is select'ed if needed 165# 166config MTD_BLKDEVS 167 tristate 168 169config MTD_BLOCK 170 tristate "Caching block device access to MTD devices" 171 depends on BLOCK 172 select MTD_BLKDEVS 173 ---help--- 174 Although most flash chips have an erase size too large to be useful 175 as block devices, it is possible to use MTD devices which are based 176 on RAM chips in this manner. This block device is a user of MTD 177 devices performing that function. 178 179 At the moment, it is also required for the Journalling Flash File 180 System(s) to obtain a handle on the MTD device when it's mounted 181 (although JFFS and JFFS2 don't actually use any of the functionality 182 of the mtdblock device). 183 184 Later, it may be extended to perform read/erase/modify/write cycles 185 on flash chips to emulate a smaller block size. Needless to say, 186 this is very unsafe, but could be useful for file systems which are 187 almost never written to. 188 189 You do not need this option for use with the DiskOnChip devices. For 190 those, enable NFTL support (CONFIG_NFTL) instead. 191 192config MTD_BLOCK_RO 193 tristate "Readonly block device access to MTD devices" 194 depends on MTD_BLOCK!=y && BLOCK 195 select MTD_BLKDEVS 196 help 197 This allows you to mount read-only file systems (such as cramfs) 198 from an MTD device, without the overhead (and danger) of the caching 199 driver. 200 201 You do not need this option for use with the DiskOnChip devices. For 202 those, enable NFTL support (CONFIG_NFTL) instead. 203 204config FTL 205 tristate "FTL (Flash Translation Layer) support" 206 depends on BLOCK 207 select MTD_BLKDEVS 208 ---help--- 209 This provides support for the original Flash Translation Layer which 210 is part of the PCMCIA specification. It uses a kind of pseudo- 211 file system on a flash device to emulate a block device with 212 512-byte sectors, on top of which you put a 'normal' file system. 213 214 You may find that the algorithms used in this code are patented 215 unless you live in the Free World where software patents aren't 216 legal - in the USA you are only permitted to use this on PCMCIA 217 hardware, although under the terms of the GPL you're obviously 218 permitted to copy, modify and distribute the code as you wish. Just 219 not use it. 220 221config NFTL 222 tristate "NFTL (NAND Flash Translation Layer) support" 223 depends on BLOCK 224 select MTD_BLKDEVS 225 ---help--- 226 This provides support for the NAND Flash Translation Layer which is 227 used on M-Systems' DiskOnChip devices. It uses a kind of pseudo- 228 file system on a flash device to emulate a block device with 229 512-byte sectors, on top of which you put a 'normal' file system. 230 231 You may find that the algorithms used in this code are patented 232 unless you live in the Free World where software patents aren't 233 legal - in the USA you are only permitted to use this on DiskOnChip 234 hardware, although under the terms of the GPL you're obviously 235 permitted to copy, modify and distribute the code as you wish. Just 236 not use it. 237 238config NFTL_RW 239 bool "Write support for NFTL" 240 depends on NFTL 241 help 242 Support for writing to the NAND Flash Translation Layer, as used 243 on the DiskOnChip. 244 245config INFTL 246 tristate "INFTL (Inverse NAND Flash Translation Layer) support" 247 depends on BLOCK 248 select MTD_BLKDEVS 249 ---help--- 250 This provides support for the Inverse NAND Flash Translation 251 Layer which is used on M-Systems' newer DiskOnChip devices. It 252 uses a kind of pseudo-file system on a flash device to emulate 253 a block device with 512-byte sectors, on top of which you put 254 a 'normal' file system. 255 256 You may find that the algorithms used in this code are patented 257 unless you live in the Free World where software patents aren't 258 legal - in the USA you are only permitted to use this on DiskOnChip 259 hardware, although under the terms of the GPL you're obviously 260 permitted to copy, modify and distribute the code as you wish. Just 261 not use it. 262 263config RFD_FTL 264 tristate "Resident Flash Disk (Flash Translation Layer) support" 265 depends on BLOCK 266 select MTD_BLKDEVS 267 ---help--- 268 This provides support for the flash translation layer known 269 as the Resident Flash Disk (RFD), as used by the Embedded BIOS 270 of General Software. There is a blurb at: 271 272 http://www.gensw.com/pages/prod/bios/rfd.htm 273 274config SSFDC 275 tristate "NAND SSFDC (SmartMedia) read only translation layer" 276 depends on BLOCK 277 select MTD_BLKDEVS 278 help 279 This enables read only access to SmartMedia formatted NAND 280 flash. You can mount it with FAT file system. 281 282 283config SM_FTL 284 tristate "SmartMedia/xD new translation layer" 285 depends on BLOCK 286 select MTD_BLKDEVS 287 select MTD_NAND_ECC 288 help 289 This enables EXPERIMENTAL R/W support for SmartMedia/xD 290 FTL (Flash translation layer). 291 Write support is only lightly tested, therefore this driver 292 isn't recommended to use with valuable data (anyway if you have 293 valuable data, do backups regardless of software/hardware you 294 use, because you never know what will eat your data...) 295 If you only need R/O access, you can use older R/O driver 296 (CONFIG_SSFDC) 297 298config MTD_OOPS 299 tristate "Log panic/oops to an MTD buffer" 300 help 301 This enables panic and oops messages to be logged to a circular 302 buffer in a flash partition where it can be read back at some 303 later point. 304 305config MTD_SWAP 306 tristate "Swap on MTD device support" 307 depends on MTD && SWAP 308 select MTD_BLKDEVS 309 help 310 Provides volatile block device driver on top of mtd partition 311 suitable for swapping. The mapping of written blocks is not saved. 312 The driver provides wear leveling by storing erase counter into the 313 OOB. 314 315config MTD_PARTITIONED_MASTER 316 bool "Retain master device when partitioned" 317 default n 318 depends on MTD 319 help 320 For historical reasons, by default, either a master is present or 321 several partitions are present, but not both. The concern was that 322 data listed in multiple partitions was dangerous; however, SCSI does 323 this and it is frequently useful for applications. This config option 324 leaves the master in even if the device is partitioned. It also makes 325 the parent of the partition device be the master device, rather than 326 what lies behind the master. 327 328source "drivers/mtd/chips/Kconfig" 329 330source "drivers/mtd/maps/Kconfig" 331 332source "drivers/mtd/devices/Kconfig" 333 334source "drivers/mtd/nand/Kconfig" 335 336source "drivers/mtd/lpddr/Kconfig" 337 338source "drivers/mtd/spi-nor/Kconfig" 339 340source "drivers/mtd/ubi/Kconfig" 341 342endif # MTD 343