1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Driver for the MMC / SD / SDIO IP found in: 4 * 5 * TC6393XB, TC6391XB, TC6387XB, T7L66XB, ASIC3, SH-Mobile SoCs 6 * 7 * Copyright (C) 2015-19 Renesas Electronics Corporation 8 * Copyright (C) 2016-19 Sang Engineering, Wolfram Sang 9 * Copyright (C) 2017 Horms Solutions, Simon Horman 10 * Copyright (C) 2011 Guennadi Liakhovetski 11 * Copyright (C) 2007 Ian Molton 12 * Copyright (C) 2004 Ian Molton 13 * 14 * This driver draws mainly on scattered spec sheets, Reverse engineering 15 * of the toshiba e800 SD driver and some parts of the 2.4 ASIC3 driver (4 bit 16 * support). (Further 4 bit support from a later datasheet). 17 * 18 * TODO: 19 * Investigate using a workqueue for PIO transfers 20 * Eliminate FIXMEs 21 * Better Power management 22 * Handle MMC errors better 23 * double buffer support 24 * 25 */ 26 27 #include <linux/delay.h> 28 #include <linux/device.h> 29 #include <linux/dma-mapping.h> 30 #include <linux/highmem.h> 31 #include <linux/interrupt.h> 32 #include <linux/io.h> 33 #include <linux/irq.h> 34 #include <linux/mfd/tmio.h> 35 #include <linux/mmc/card.h> 36 #include <linux/mmc/host.h> 37 #include <linux/mmc/mmc.h> 38 #include <linux/mmc/slot-gpio.h> 39 #include <linux/module.h> 40 #include <linux/pagemap.h> 41 #include <linux/platform_device.h> 42 #include <linux/pm_qos.h> 43 #include <linux/pm_runtime.h> 44 #include <linux/regulator/consumer.h> 45 #include <linux/mmc/sdio.h> 46 #include <linux/scatterlist.h> 47 #include <linux/sizes.h> 48 #include <linux/spinlock.h> 49 #include <linux/workqueue.h> 50 51 #include "tmio_mmc.h" 52 53 static inline void tmio_mmc_start_dma(struct tmio_mmc_host *host, 54 struct mmc_data *data) 55 { 56 if (host->dma_ops) 57 host->dma_ops->start(host, data); 58 } 59 60 static inline void tmio_mmc_end_dma(struct tmio_mmc_host *host) 61 { 62 if (host->dma_ops && host->dma_ops->end) 63 host->dma_ops->end(host); 64 } 65 66 static inline void tmio_mmc_enable_dma(struct tmio_mmc_host *host, bool enable) 67 { 68 if (host->dma_ops) 69 host->dma_ops->enable(host, enable); 70 } 71 72 static inline void tmio_mmc_request_dma(struct tmio_mmc_host *host, 73 struct tmio_mmc_data *pdata) 74 { 75 if (host->dma_ops) { 76 host->dma_ops->request(host, pdata); 77 } else { 78 host->chan_tx = NULL; 79 host->chan_rx = NULL; 80 } 81 } 82 83 static inline void tmio_mmc_release_dma(struct tmio_mmc_host *host) 84 { 85 if (host->dma_ops) 86 host->dma_ops->release(host); 87 } 88 89 static inline void tmio_mmc_abort_dma(struct tmio_mmc_host *host) 90 { 91 if (host->dma_ops) 92 host->dma_ops->abort(host); 93 } 94 95 static inline void tmio_mmc_dataend_dma(struct tmio_mmc_host *host) 96 { 97 if (host->dma_ops) 98 host->dma_ops->dataend(host); 99 } 100 101 void tmio_mmc_enable_mmc_irqs(struct tmio_mmc_host *host, u32 i) 102 { 103 host->sdcard_irq_mask &= ~(i & TMIO_MASK_IRQ); 104 sd_ctrl_write32_as_16_and_16(host, CTL_IRQ_MASK, host->sdcard_irq_mask); 105 } 106 EXPORT_SYMBOL_GPL(tmio_mmc_enable_mmc_irqs); 107 108 void tmio_mmc_disable_mmc_irqs(struct tmio_mmc_host *host, u32 i) 109 { 110 host->sdcard_irq_mask |= (i & TMIO_MASK_IRQ); 111 sd_ctrl_write32_as_16_and_16(host, CTL_IRQ_MASK, host->sdcard_irq_mask); 112 } 113 EXPORT_SYMBOL_GPL(tmio_mmc_disable_mmc_irqs); 114 115 static void tmio_mmc_ack_mmc_irqs(struct tmio_mmc_host *host, u32 i) 116 { 117 sd_ctrl_write32_as_16_and_16(host, CTL_STATUS, ~i); 118 } 119 120 static void tmio_mmc_init_sg(struct tmio_mmc_host *host, struct mmc_data *data) 121 { 122 host->sg_len = data->sg_len; 123 host->sg_ptr = data->sg; 124 host->sg_orig = data->sg; 125 host->sg_off = 0; 126 } 127 128 static int tmio_mmc_next_sg(struct tmio_mmc_host *host) 129 { 130 host->sg_ptr = sg_next(host->sg_ptr); 131 host->sg_off = 0; 132 return --host->sg_len; 133 } 134 135 #define CMDREQ_TIMEOUT 5000 136 137 static void tmio_mmc_enable_sdio_irq(struct mmc_host *mmc, int enable) 138 { 139 struct tmio_mmc_host *host = mmc_priv(mmc); 140 141 if (enable && !host->sdio_irq_enabled) { 142 u16 sdio_status; 143 144 /* Keep device active while SDIO irq is enabled */ 145 pm_runtime_get_sync(mmc_dev(mmc)); 146 147 host->sdio_irq_enabled = true; 148 host->sdio_irq_mask = TMIO_SDIO_MASK_ALL & ~TMIO_SDIO_STAT_IOIRQ; 149 150 /* Clear obsolete interrupts before enabling */ 151 sdio_status = sd_ctrl_read16(host, CTL_SDIO_STATUS) & ~TMIO_SDIO_MASK_ALL; 152 if (host->pdata->flags & TMIO_MMC_SDIO_STATUS_SETBITS) 153 sdio_status |= TMIO_SDIO_SETBITS_MASK; 154 sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status); 155 156 sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask); 157 } else if (!enable && host->sdio_irq_enabled) { 158 host->sdio_irq_mask = TMIO_SDIO_MASK_ALL; 159 sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask); 160 161 host->sdio_irq_enabled = false; 162 pm_runtime_mark_last_busy(mmc_dev(mmc)); 163 pm_runtime_put_autosuspend(mmc_dev(mmc)); 164 } 165 } 166 167 static void tmio_mmc_set_bus_width(struct tmio_mmc_host *host, 168 unsigned char bus_width) 169 { 170 u16 reg = sd_ctrl_read16(host, CTL_SD_MEM_CARD_OPT) 171 & ~(CARD_OPT_WIDTH | CARD_OPT_WIDTH8); 172 173 /* reg now applies to MMC_BUS_WIDTH_4 */ 174 if (bus_width == MMC_BUS_WIDTH_1) 175 reg |= CARD_OPT_WIDTH; 176 else if (bus_width == MMC_BUS_WIDTH_8) 177 reg |= CARD_OPT_WIDTH8; 178 179 sd_ctrl_write16(host, CTL_SD_MEM_CARD_OPT, reg); 180 } 181 182 static void tmio_mmc_reset(struct tmio_mmc_host *host) 183 { 184 /* FIXME - should we set stop clock reg here */ 185 sd_ctrl_write16(host, CTL_RESET_SD, 0x0000); 186 usleep_range(10000, 11000); 187 sd_ctrl_write16(host, CTL_RESET_SD, 0x0001); 188 usleep_range(10000, 11000); 189 190 tmio_mmc_abort_dma(host); 191 192 if (host->reset) 193 host->reset(host); 194 195 sd_ctrl_write32_as_16_and_16(host, CTL_IRQ_MASK, host->sdcard_irq_mask_all); 196 host->sdcard_irq_mask = host->sdcard_irq_mask_all; 197 198 if (host->native_hotplug) 199 tmio_mmc_enable_mmc_irqs(host, 200 TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT); 201 202 tmio_mmc_set_bus_width(host, host->mmc->ios.bus_width); 203 204 if (host->pdata->flags & TMIO_MMC_SDIO_IRQ) { 205 sd_ctrl_write16(host, CTL_SDIO_IRQ_MASK, host->sdio_irq_mask); 206 sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0001); 207 } 208 209 if (host->mmc->card) 210 mmc_retune_needed(host->mmc); 211 } 212 213 static void tmio_mmc_reset_work(struct work_struct *work) 214 { 215 struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host, 216 delayed_reset_work.work); 217 struct mmc_request *mrq; 218 unsigned long flags; 219 220 spin_lock_irqsave(&host->lock, flags); 221 mrq = host->mrq; 222 223 /* 224 * is request already finished? Since we use a non-blocking 225 * cancel_delayed_work(), it can happen, that a .set_ios() call preempts 226 * us, so, have to check for IS_ERR(host->mrq) 227 */ 228 if (IS_ERR_OR_NULL(mrq) || 229 time_is_after_jiffies(host->last_req_ts + 230 msecs_to_jiffies(CMDREQ_TIMEOUT))) { 231 spin_unlock_irqrestore(&host->lock, flags); 232 return; 233 } 234 235 dev_warn(&host->pdev->dev, 236 "timeout waiting for hardware interrupt (CMD%u)\n", 237 mrq->cmd->opcode); 238 239 if (host->data) 240 host->data->error = -ETIMEDOUT; 241 else if (host->cmd) 242 host->cmd->error = -ETIMEDOUT; 243 else 244 mrq->cmd->error = -ETIMEDOUT; 245 246 host->cmd = NULL; 247 host->data = NULL; 248 249 spin_unlock_irqrestore(&host->lock, flags); 250 251 tmio_mmc_reset(host); 252 253 /* Ready for new calls */ 254 host->mrq = NULL; 255 mmc_request_done(host->mmc, mrq); 256 } 257 258 /* These are the bitmasks the tmio chip requires to implement the MMC response 259 * types. Note that R1 and R6 are the same in this scheme. */ 260 #define APP_CMD 0x0040 261 #define RESP_NONE 0x0300 262 #define RESP_R1 0x0400 263 #define RESP_R1B 0x0500 264 #define RESP_R2 0x0600 265 #define RESP_R3 0x0700 266 #define DATA_PRESENT 0x0800 267 #define TRANSFER_READ 0x1000 268 #define TRANSFER_MULTI 0x2000 269 #define SECURITY_CMD 0x4000 270 #define NO_CMD12_ISSUE 0x4000 /* TMIO_MMC_HAVE_CMD12_CTRL */ 271 272 static int tmio_mmc_start_command(struct tmio_mmc_host *host, 273 struct mmc_command *cmd) 274 { 275 struct mmc_data *data = host->data; 276 int c = cmd->opcode; 277 278 switch (mmc_resp_type(cmd)) { 279 case MMC_RSP_NONE: c |= RESP_NONE; break; 280 case MMC_RSP_R1: 281 case MMC_RSP_R1_NO_CRC: 282 c |= RESP_R1; break; 283 case MMC_RSP_R1B: c |= RESP_R1B; break; 284 case MMC_RSP_R2: c |= RESP_R2; break; 285 case MMC_RSP_R3: c |= RESP_R3; break; 286 default: 287 pr_debug("Unknown response type %d\n", mmc_resp_type(cmd)); 288 return -EINVAL; 289 } 290 291 host->cmd = cmd; 292 293 /* FIXME - this seems to be ok commented out but the spec suggest this bit 294 * should be set when issuing app commands. 295 * if(cmd->flags & MMC_FLAG_ACMD) 296 * c |= APP_CMD; 297 */ 298 if (data) { 299 c |= DATA_PRESENT; 300 if (data->blocks > 1) { 301 sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, TMIO_STOP_SEC); 302 c |= TRANSFER_MULTI; 303 304 /* 305 * Disable auto CMD12 at IO_RW_EXTENDED and 306 * SET_BLOCK_COUNT when doing multiple block transfer 307 */ 308 if ((host->pdata->flags & TMIO_MMC_HAVE_CMD12_CTRL) && 309 (cmd->opcode == SD_IO_RW_EXTENDED || host->mrq->sbc)) 310 c |= NO_CMD12_ISSUE; 311 } 312 if (data->flags & MMC_DATA_READ) 313 c |= TRANSFER_READ; 314 } 315 316 tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_CMD); 317 318 /* Fire off the command */ 319 sd_ctrl_write32_as_16_and_16(host, CTL_ARG_REG, cmd->arg); 320 sd_ctrl_write16(host, CTL_SD_CMD, c); 321 322 return 0; 323 } 324 325 static void tmio_mmc_transfer_data(struct tmio_mmc_host *host, 326 unsigned short *buf, 327 unsigned int count) 328 { 329 int is_read = host->data->flags & MMC_DATA_READ; 330 u8 *buf8; 331 332 /* 333 * Transfer the data 334 */ 335 if (host->pdata->flags & TMIO_MMC_32BIT_DATA_PORT) { 336 u32 data = 0; 337 u32 *buf32 = (u32 *)buf; 338 339 if (is_read) 340 sd_ctrl_read32_rep(host, CTL_SD_DATA_PORT, buf32, 341 count >> 2); 342 else 343 sd_ctrl_write32_rep(host, CTL_SD_DATA_PORT, buf32, 344 count >> 2); 345 346 /* if count was multiple of 4 */ 347 if (!(count & 0x3)) 348 return; 349 350 buf32 += count >> 2; 351 count %= 4; 352 353 if (is_read) { 354 sd_ctrl_read32_rep(host, CTL_SD_DATA_PORT, &data, 1); 355 memcpy(buf32, &data, count); 356 } else { 357 memcpy(&data, buf32, count); 358 sd_ctrl_write32_rep(host, CTL_SD_DATA_PORT, &data, 1); 359 } 360 361 return; 362 } 363 364 if (is_read) 365 sd_ctrl_read16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1); 366 else 367 sd_ctrl_write16_rep(host, CTL_SD_DATA_PORT, buf, count >> 1); 368 369 /* if count was even number */ 370 if (!(count & 0x1)) 371 return; 372 373 /* if count was odd number */ 374 buf8 = (u8 *)(buf + (count >> 1)); 375 376 /* 377 * FIXME 378 * 379 * driver and this function are assuming that 380 * it is used as little endian 381 */ 382 if (is_read) 383 *buf8 = sd_ctrl_read16(host, CTL_SD_DATA_PORT) & 0xff; 384 else 385 sd_ctrl_write16(host, CTL_SD_DATA_PORT, *buf8); 386 } 387 388 /* 389 * This chip always returns (at least?) as much data as you ask for. 390 * I'm unsure what happens if you ask for less than a block. This should be 391 * looked into to ensure that a funny length read doesn't hose the controller. 392 */ 393 static void tmio_mmc_pio_irq(struct tmio_mmc_host *host) 394 { 395 struct mmc_data *data = host->data; 396 void *sg_virt; 397 unsigned short *buf; 398 unsigned int count; 399 unsigned long flags; 400 401 if (host->dma_on) { 402 pr_err("PIO IRQ in DMA mode!\n"); 403 return; 404 } else if (!data) { 405 pr_debug("Spurious PIO IRQ\n"); 406 return; 407 } 408 409 sg_virt = tmio_mmc_kmap_atomic(host->sg_ptr, &flags); 410 buf = (unsigned short *)(sg_virt + host->sg_off); 411 412 count = host->sg_ptr->length - host->sg_off; 413 if (count > data->blksz) 414 count = data->blksz; 415 416 pr_debug("count: %08x offset: %08x flags %08x\n", 417 count, host->sg_off, data->flags); 418 419 /* Transfer the data */ 420 tmio_mmc_transfer_data(host, buf, count); 421 422 host->sg_off += count; 423 424 tmio_mmc_kunmap_atomic(host->sg_ptr, &flags, sg_virt); 425 426 if (host->sg_off == host->sg_ptr->length) 427 tmio_mmc_next_sg(host); 428 } 429 430 static void tmio_mmc_check_bounce_buffer(struct tmio_mmc_host *host) 431 { 432 if (host->sg_ptr == &host->bounce_sg) { 433 unsigned long flags; 434 void *sg_vaddr = tmio_mmc_kmap_atomic(host->sg_orig, &flags); 435 436 memcpy(sg_vaddr, host->bounce_buf, host->bounce_sg.length); 437 tmio_mmc_kunmap_atomic(host->sg_orig, &flags, sg_vaddr); 438 } 439 } 440 441 /* needs to be called with host->lock held */ 442 void tmio_mmc_do_data_irq(struct tmio_mmc_host *host) 443 { 444 struct mmc_data *data = host->data; 445 struct mmc_command *stop; 446 447 host->data = NULL; 448 449 if (!data) { 450 dev_warn(&host->pdev->dev, "Spurious data end IRQ\n"); 451 return; 452 } 453 stop = data->stop; 454 455 /* FIXME - return correct transfer count on errors */ 456 if (!data->error) 457 data->bytes_xfered = data->blocks * data->blksz; 458 else 459 data->bytes_xfered = 0; 460 461 pr_debug("Completed data request\n"); 462 463 /* 464 * FIXME: other drivers allow an optional stop command of any given type 465 * which we dont do, as the chip can auto generate them. 466 * Perhaps we can be smarter about when to use auto CMD12 and 467 * only issue the auto request when we know this is the desired 468 * stop command, allowing fallback to the stop command the 469 * upper layers expect. For now, we do what works. 470 */ 471 472 if (data->flags & MMC_DATA_READ) { 473 if (host->dma_on) 474 tmio_mmc_check_bounce_buffer(host); 475 dev_dbg(&host->pdev->dev, "Complete Rx request %p\n", 476 host->mrq); 477 } else { 478 dev_dbg(&host->pdev->dev, "Complete Tx request %p\n", 479 host->mrq); 480 } 481 482 if (stop && !host->mrq->sbc) { 483 if (stop->opcode != MMC_STOP_TRANSMISSION || stop->arg) 484 dev_err(&host->pdev->dev, "unsupported stop: CMD%u,0x%x. We did CMD12,0\n", 485 stop->opcode, stop->arg); 486 487 /* fill in response from auto CMD12 */ 488 stop->resp[0] = sd_ctrl_read16_and_16_as_32(host, CTL_RESPONSE); 489 490 sd_ctrl_write16(host, CTL_STOP_INTERNAL_ACTION, 0); 491 } 492 493 schedule_work(&host->done); 494 } 495 EXPORT_SYMBOL_GPL(tmio_mmc_do_data_irq); 496 497 static void tmio_mmc_data_irq(struct tmio_mmc_host *host, unsigned int stat) 498 { 499 struct mmc_data *data; 500 501 spin_lock(&host->lock); 502 data = host->data; 503 504 if (!data) 505 goto out; 506 507 if (stat & TMIO_STAT_DATATIMEOUT) 508 data->error = -ETIMEDOUT; 509 else if (stat & TMIO_STAT_CRCFAIL || stat & TMIO_STAT_STOPBIT_ERR || 510 stat & TMIO_STAT_TXUNDERRUN) 511 data->error = -EILSEQ; 512 if (host->dma_on && (data->flags & MMC_DATA_WRITE)) { 513 u32 status = sd_ctrl_read16_and_16_as_32(host, CTL_STATUS); 514 bool done = false; 515 516 /* 517 * Has all data been written out yet? Testing on SuperH showed, 518 * that in most cases the first interrupt comes already with the 519 * BUSY status bit clear, but on some operations, like mount or 520 * in the beginning of a write / sync / umount, there is one 521 * DATAEND interrupt with the BUSY bit set, in this cases 522 * waiting for one more interrupt fixes the problem. 523 */ 524 if (host->pdata->flags & TMIO_MMC_HAS_IDLE_WAIT) { 525 if (status & TMIO_STAT_SCLKDIVEN) 526 done = true; 527 } else { 528 if (!(status & TMIO_STAT_CMD_BUSY)) 529 done = true; 530 } 531 532 if (done) { 533 tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND); 534 tmio_mmc_dataend_dma(host); 535 } 536 } else if (host->dma_on && (data->flags & MMC_DATA_READ)) { 537 tmio_mmc_disable_mmc_irqs(host, TMIO_STAT_DATAEND); 538 tmio_mmc_dataend_dma(host); 539 } else { 540 tmio_mmc_do_data_irq(host); 541 tmio_mmc_disable_mmc_irqs(host, TMIO_MASK_READOP | TMIO_MASK_WRITEOP); 542 } 543 out: 544 spin_unlock(&host->lock); 545 } 546 547 static void tmio_mmc_cmd_irq(struct tmio_mmc_host *host, unsigned int stat) 548 { 549 struct mmc_command *cmd = host->cmd; 550 int i, addr; 551 552 spin_lock(&host->lock); 553 554 if (!host->cmd) { 555 pr_debug("Spurious CMD irq\n"); 556 goto out; 557 } 558 559 /* This controller is sicker than the PXA one. Not only do we need to 560 * drop the top 8 bits of the first response word, we also need to 561 * modify the order of the response for short response command types. 562 */ 563 564 for (i = 3, addr = CTL_RESPONSE ; i >= 0 ; i--, addr += 4) 565 cmd->resp[i] = sd_ctrl_read16_and_16_as_32(host, addr); 566 567 if (cmd->flags & MMC_RSP_136) { 568 cmd->resp[0] = (cmd->resp[0] << 8) | (cmd->resp[1] >> 24); 569 cmd->resp[1] = (cmd->resp[1] << 8) | (cmd->resp[2] >> 24); 570 cmd->resp[2] = (cmd->resp[2] << 8) | (cmd->resp[3] >> 24); 571 cmd->resp[3] <<= 8; 572 } else if (cmd->flags & MMC_RSP_R3) { 573 cmd->resp[0] = cmd->resp[3]; 574 } 575 576 if (stat & TMIO_STAT_CMDTIMEOUT) 577 cmd->error = -ETIMEDOUT; 578 else if ((stat & TMIO_STAT_CRCFAIL && cmd->flags & MMC_RSP_CRC) || 579 stat & TMIO_STAT_STOPBIT_ERR || 580 stat & TMIO_STAT_CMD_IDX_ERR) 581 cmd->error = -EILSEQ; 582 583 /* If there is data to handle we enable data IRQs here, and 584 * we will ultimatley finish the request in the data_end handler. 585 * If theres no data or we encountered an error, finish now. 586 */ 587 if (host->data && (!cmd->error || cmd->error == -EILSEQ)) { 588 if (host->data->flags & MMC_DATA_READ) { 589 if (!host->dma_on) { 590 tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_READOP); 591 } else { 592 tmio_mmc_disable_mmc_irqs(host, 593 TMIO_MASK_READOP); 594 tasklet_schedule(&host->dma_issue); 595 } 596 } else { 597 if (!host->dma_on) { 598 tmio_mmc_enable_mmc_irqs(host, TMIO_MASK_WRITEOP); 599 } else { 600 tmio_mmc_disable_mmc_irqs(host, 601 TMIO_MASK_WRITEOP); 602 tasklet_schedule(&host->dma_issue); 603 } 604 } 605 } else { 606 schedule_work(&host->done); 607 } 608 609 out: 610 spin_unlock(&host->lock); 611 } 612 613 static bool __tmio_mmc_card_detect_irq(struct tmio_mmc_host *host, 614 int ireg, int status) 615 { 616 struct mmc_host *mmc = host->mmc; 617 618 /* Card insert / remove attempts */ 619 if (ireg & (TMIO_STAT_CARD_INSERT | TMIO_STAT_CARD_REMOVE)) { 620 tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_CARD_INSERT | 621 TMIO_STAT_CARD_REMOVE); 622 if ((((ireg & TMIO_STAT_CARD_REMOVE) && mmc->card) || 623 ((ireg & TMIO_STAT_CARD_INSERT) && !mmc->card)) && 624 !work_pending(&mmc->detect.work)) 625 mmc_detect_change(host->mmc, msecs_to_jiffies(100)); 626 return true; 627 } 628 629 return false; 630 } 631 632 static bool __tmio_mmc_sdcard_irq(struct tmio_mmc_host *host, int ireg, 633 int status) 634 { 635 /* Command completion */ 636 if (ireg & (TMIO_STAT_CMDRESPEND | TMIO_STAT_CMDTIMEOUT)) { 637 tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_CMDRESPEND | 638 TMIO_STAT_CMDTIMEOUT); 639 tmio_mmc_cmd_irq(host, status); 640 return true; 641 } 642 643 /* Data transfer */ 644 if (ireg & (TMIO_STAT_RXRDY | TMIO_STAT_TXRQ)) { 645 tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_RXRDY | TMIO_STAT_TXRQ); 646 tmio_mmc_pio_irq(host); 647 return true; 648 } 649 650 /* Data transfer completion */ 651 if (ireg & TMIO_STAT_DATAEND) { 652 tmio_mmc_ack_mmc_irqs(host, TMIO_STAT_DATAEND); 653 tmio_mmc_data_irq(host, status); 654 return true; 655 } 656 657 return false; 658 } 659 660 static bool __tmio_mmc_sdio_irq(struct tmio_mmc_host *host) 661 { 662 struct mmc_host *mmc = host->mmc; 663 struct tmio_mmc_data *pdata = host->pdata; 664 unsigned int ireg, status; 665 unsigned int sdio_status; 666 667 if (!(pdata->flags & TMIO_MMC_SDIO_IRQ)) 668 return false; 669 670 status = sd_ctrl_read16(host, CTL_SDIO_STATUS); 671 ireg = status & TMIO_SDIO_MASK_ALL & ~host->sdio_irq_mask; 672 673 sdio_status = status & ~TMIO_SDIO_MASK_ALL; 674 if (pdata->flags & TMIO_MMC_SDIO_STATUS_SETBITS) 675 sdio_status |= TMIO_SDIO_SETBITS_MASK; 676 677 sd_ctrl_write16(host, CTL_SDIO_STATUS, sdio_status); 678 679 if (mmc->caps & MMC_CAP_SDIO_IRQ && ireg & TMIO_SDIO_STAT_IOIRQ) 680 mmc_signal_sdio_irq(mmc); 681 682 return ireg; 683 } 684 685 irqreturn_t tmio_mmc_irq(int irq, void *devid) 686 { 687 struct tmio_mmc_host *host = devid; 688 unsigned int ireg, status; 689 690 status = sd_ctrl_read16_and_16_as_32(host, CTL_STATUS); 691 ireg = status & TMIO_MASK_IRQ & ~host->sdcard_irq_mask; 692 693 /* Clear the status except the interrupt status */ 694 sd_ctrl_write32_as_16_and_16(host, CTL_STATUS, TMIO_MASK_IRQ); 695 696 if (__tmio_mmc_card_detect_irq(host, ireg, status)) 697 return IRQ_HANDLED; 698 if (__tmio_mmc_sdcard_irq(host, ireg, status)) 699 return IRQ_HANDLED; 700 701 if (__tmio_mmc_sdio_irq(host)) 702 return IRQ_HANDLED; 703 704 return IRQ_NONE; 705 } 706 EXPORT_SYMBOL_GPL(tmio_mmc_irq); 707 708 static int tmio_mmc_start_data(struct tmio_mmc_host *host, 709 struct mmc_data *data) 710 { 711 struct tmio_mmc_data *pdata = host->pdata; 712 713 pr_debug("setup data transfer: blocksize %08x nr_blocks %d\n", 714 data->blksz, data->blocks); 715 716 /* Some hardware cannot perform 2 byte requests in 4/8 bit mode */ 717 if (host->mmc->ios.bus_width == MMC_BUS_WIDTH_4 || 718 host->mmc->ios.bus_width == MMC_BUS_WIDTH_8) { 719 int blksz_2bytes = pdata->flags & TMIO_MMC_BLKSZ_2BYTES; 720 721 if (data->blksz < 2 || (data->blksz < 4 && !blksz_2bytes)) { 722 pr_err("%s: %d byte block unsupported in 4/8 bit mode\n", 723 mmc_hostname(host->mmc), data->blksz); 724 return -EINVAL; 725 } 726 } 727 728 tmio_mmc_init_sg(host, data); 729 host->data = data; 730 host->dma_on = false; 731 732 /* Set transfer length / blocksize */ 733 sd_ctrl_write16(host, CTL_SD_XFER_LEN, data->blksz); 734 if (host->mmc->max_blk_count >= SZ_64K) 735 sd_ctrl_write32(host, CTL_XFER_BLK_COUNT, data->blocks); 736 else 737 sd_ctrl_write16(host, CTL_XFER_BLK_COUNT, data->blocks); 738 739 tmio_mmc_start_dma(host, data); 740 741 return 0; 742 } 743 744 static void tmio_process_mrq(struct tmio_mmc_host *host, 745 struct mmc_request *mrq) 746 { 747 struct mmc_command *cmd; 748 int ret; 749 750 if (mrq->sbc && host->cmd != mrq->sbc) { 751 cmd = mrq->sbc; 752 } else { 753 cmd = mrq->cmd; 754 if (mrq->data) { 755 ret = tmio_mmc_start_data(host, mrq->data); 756 if (ret) 757 goto fail; 758 } 759 } 760 761 ret = tmio_mmc_start_command(host, cmd); 762 if (ret) 763 goto fail; 764 765 schedule_delayed_work(&host->delayed_reset_work, 766 msecs_to_jiffies(CMDREQ_TIMEOUT)); 767 return; 768 769 fail: 770 host->mrq = NULL; 771 mrq->cmd->error = ret; 772 mmc_request_done(host->mmc, mrq); 773 } 774 775 /* Process requests from the MMC layer */ 776 static void tmio_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) 777 { 778 struct tmio_mmc_host *host = mmc_priv(mmc); 779 unsigned long flags; 780 781 spin_lock_irqsave(&host->lock, flags); 782 783 if (host->mrq) { 784 pr_debug("request not null\n"); 785 if (IS_ERR(host->mrq)) { 786 spin_unlock_irqrestore(&host->lock, flags); 787 mrq->cmd->error = -EAGAIN; 788 mmc_request_done(mmc, mrq); 789 return; 790 } 791 } 792 793 host->last_req_ts = jiffies; 794 wmb(); 795 host->mrq = mrq; 796 797 spin_unlock_irqrestore(&host->lock, flags); 798 799 tmio_process_mrq(host, mrq); 800 } 801 802 static void tmio_mmc_finish_request(struct tmio_mmc_host *host) 803 { 804 struct mmc_request *mrq; 805 unsigned long flags; 806 807 spin_lock_irqsave(&host->lock, flags); 808 809 tmio_mmc_end_dma(host); 810 811 mrq = host->mrq; 812 if (IS_ERR_OR_NULL(mrq)) { 813 spin_unlock_irqrestore(&host->lock, flags); 814 return; 815 } 816 817 /* If not SET_BLOCK_COUNT, clear old data */ 818 if (host->cmd != mrq->sbc) { 819 host->cmd = NULL; 820 host->data = NULL; 821 host->mrq = NULL; 822 } 823 824 cancel_delayed_work(&host->delayed_reset_work); 825 826 spin_unlock_irqrestore(&host->lock, flags); 827 828 if (mrq->cmd->error || (mrq->data && mrq->data->error)) { 829 tmio_mmc_ack_mmc_irqs(host, TMIO_MASK_IRQ); /* Clear all */ 830 tmio_mmc_abort_dma(host); 831 } 832 833 /* Error means retune, but executed command was still successful */ 834 if (host->check_retune && host->check_retune(host, mrq)) 835 mmc_retune_needed(host->mmc); 836 837 /* If SET_BLOCK_COUNT, continue with main command */ 838 if (host->mrq && !mrq->cmd->error) { 839 tmio_process_mrq(host, mrq); 840 return; 841 } 842 843 if (host->fixup_request) 844 host->fixup_request(host, mrq); 845 846 mmc_request_done(host->mmc, mrq); 847 } 848 849 static void tmio_mmc_done_work(struct work_struct *work) 850 { 851 struct tmio_mmc_host *host = container_of(work, struct tmio_mmc_host, 852 done); 853 tmio_mmc_finish_request(host); 854 } 855 856 static void tmio_mmc_power_on(struct tmio_mmc_host *host, unsigned short vdd) 857 { 858 struct mmc_host *mmc = host->mmc; 859 int ret = 0; 860 861 /* .set_ios() is returning void, so, no chance to report an error */ 862 863 if (host->set_pwr) 864 host->set_pwr(host->pdev, 1); 865 866 if (!IS_ERR(mmc->supply.vmmc)) { 867 ret = mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd); 868 /* 869 * Attention: empiric value. With a b43 WiFi SDIO card this 870 * delay proved necessary for reliable card-insertion probing. 871 * 100us were not enough. Is this the same 140us delay, as in 872 * tmio_mmc_set_ios()? 873 */ 874 usleep_range(200, 300); 875 } 876 /* 877 * It seems, VccQ should be switched on after Vcc, this is also what the 878 * omap_hsmmc.c driver does. 879 */ 880 if (!IS_ERR(mmc->supply.vqmmc) && !ret) { 881 ret = regulator_enable(mmc->supply.vqmmc); 882 usleep_range(200, 300); 883 } 884 885 if (ret < 0) 886 dev_dbg(&host->pdev->dev, "Regulators failed to power up: %d\n", 887 ret); 888 } 889 890 static void tmio_mmc_power_off(struct tmio_mmc_host *host) 891 { 892 struct mmc_host *mmc = host->mmc; 893 894 if (!IS_ERR(mmc->supply.vqmmc)) 895 regulator_disable(mmc->supply.vqmmc); 896 897 if (!IS_ERR(mmc->supply.vmmc)) 898 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); 899 900 if (host->set_pwr) 901 host->set_pwr(host->pdev, 0); 902 } 903 904 static unsigned int tmio_mmc_get_timeout_cycles(struct tmio_mmc_host *host) 905 { 906 u16 val = sd_ctrl_read16(host, CTL_SD_MEM_CARD_OPT); 907 908 val = (val & CARD_OPT_TOP_MASK) >> CARD_OPT_TOP_SHIFT; 909 return 1 << (13 + val); 910 } 911 912 static void tmio_mmc_max_busy_timeout(struct tmio_mmc_host *host) 913 { 914 unsigned int clk_rate = host->mmc->actual_clock ?: host->mmc->f_max; 915 916 host->mmc->max_busy_timeout = host->get_timeout_cycles(host) / 917 (clk_rate / MSEC_PER_SEC); 918 } 919 920 /* Set MMC clock / power. 921 * Note: This controller uses a simple divider scheme therefore it cannot 922 * run a MMC card at full speed (20MHz). The max clock is 24MHz on SD, but as 923 * MMC wont run that fast, it has to be clocked at 12MHz which is the next 924 * slowest setting. 925 */ 926 static void tmio_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) 927 { 928 struct tmio_mmc_host *host = mmc_priv(mmc); 929 struct device *dev = &host->pdev->dev; 930 unsigned long flags; 931 932 mutex_lock(&host->ios_lock); 933 934 spin_lock_irqsave(&host->lock, flags); 935 if (host->mrq) { 936 if (IS_ERR(host->mrq)) { 937 dev_dbg(dev, 938 "%s.%d: concurrent .set_ios(), clk %u, mode %u\n", 939 current->comm, task_pid_nr(current), 940 ios->clock, ios->power_mode); 941 host->mrq = ERR_PTR(-EINTR); 942 } else { 943 dev_dbg(dev, 944 "%s.%d: CMD%u active since %lu, now %lu!\n", 945 current->comm, task_pid_nr(current), 946 host->mrq->cmd->opcode, host->last_req_ts, 947 jiffies); 948 } 949 spin_unlock_irqrestore(&host->lock, flags); 950 951 mutex_unlock(&host->ios_lock); 952 return; 953 } 954 955 host->mrq = ERR_PTR(-EBUSY); 956 957 spin_unlock_irqrestore(&host->lock, flags); 958 959 switch (ios->power_mode) { 960 case MMC_POWER_OFF: 961 tmio_mmc_power_off(host); 962 /* For R-Car Gen2+, we need to reset SDHI specific SCC */ 963 if (host->pdata->flags & TMIO_MMC_MIN_RCAR2) { 964 host->reset(host); 965 966 if (host->native_hotplug) 967 tmio_mmc_enable_mmc_irqs(host, 968 TMIO_STAT_CARD_REMOVE | 969 TMIO_STAT_CARD_INSERT); 970 } 971 972 host->set_clock(host, 0); 973 break; 974 case MMC_POWER_UP: 975 tmio_mmc_power_on(host, ios->vdd); 976 host->set_clock(host, ios->clock); 977 tmio_mmc_set_bus_width(host, ios->bus_width); 978 break; 979 case MMC_POWER_ON: 980 host->set_clock(host, ios->clock); 981 tmio_mmc_set_bus_width(host, ios->bus_width); 982 break; 983 } 984 985 if (host->pdata->flags & TMIO_MMC_USE_BUSY_TIMEOUT) 986 tmio_mmc_max_busy_timeout(host); 987 988 /* Let things settle. delay taken from winCE driver */ 989 usleep_range(140, 200); 990 if (PTR_ERR(host->mrq) == -EINTR) 991 dev_dbg(&host->pdev->dev, 992 "%s.%d: IOS interrupted: clk %u, mode %u", 993 current->comm, task_pid_nr(current), 994 ios->clock, ios->power_mode); 995 host->mrq = NULL; 996 997 host->clk_cache = ios->clock; 998 999 mutex_unlock(&host->ios_lock); 1000 } 1001 1002 static int tmio_mmc_get_ro(struct mmc_host *mmc) 1003 { 1004 struct tmio_mmc_host *host = mmc_priv(mmc); 1005 1006 return !(sd_ctrl_read16_and_16_as_32(host, CTL_STATUS) & 1007 TMIO_STAT_WRPROTECT); 1008 } 1009 1010 static int tmio_mmc_get_cd(struct mmc_host *mmc) 1011 { 1012 struct tmio_mmc_host *host = mmc_priv(mmc); 1013 1014 return !!(sd_ctrl_read16_and_16_as_32(host, CTL_STATUS) & 1015 TMIO_STAT_SIGSTATE); 1016 } 1017 1018 static int tmio_multi_io_quirk(struct mmc_card *card, 1019 unsigned int direction, int blk_size) 1020 { 1021 struct tmio_mmc_host *host = mmc_priv(card->host); 1022 1023 if (host->multi_io_quirk) 1024 return host->multi_io_quirk(card, direction, blk_size); 1025 1026 return blk_size; 1027 } 1028 1029 static struct mmc_host_ops tmio_mmc_ops = { 1030 .request = tmio_mmc_request, 1031 .set_ios = tmio_mmc_set_ios, 1032 .get_ro = tmio_mmc_get_ro, 1033 .get_cd = tmio_mmc_get_cd, 1034 .enable_sdio_irq = tmio_mmc_enable_sdio_irq, 1035 .multi_io_quirk = tmio_multi_io_quirk, 1036 }; 1037 1038 static int tmio_mmc_init_ocr(struct tmio_mmc_host *host) 1039 { 1040 struct tmio_mmc_data *pdata = host->pdata; 1041 struct mmc_host *mmc = host->mmc; 1042 int err; 1043 1044 err = mmc_regulator_get_supply(mmc); 1045 if (err) 1046 return err; 1047 1048 /* use ocr_mask if no regulator */ 1049 if (!mmc->ocr_avail) 1050 mmc->ocr_avail = pdata->ocr_mask; 1051 1052 /* 1053 * try again. 1054 * There is possibility that regulator has not been probed 1055 */ 1056 if (!mmc->ocr_avail) 1057 return -EPROBE_DEFER; 1058 1059 return 0; 1060 } 1061 1062 static void tmio_mmc_of_parse(struct platform_device *pdev, 1063 struct mmc_host *mmc) 1064 { 1065 const struct device_node *np = pdev->dev.of_node; 1066 1067 if (!np) 1068 return; 1069 1070 /* 1071 * DEPRECATED: 1072 * For new platforms, please use "disable-wp" instead of 1073 * "toshiba,mmc-wrprotect-disable" 1074 */ 1075 if (of_get_property(np, "toshiba,mmc-wrprotect-disable", NULL)) 1076 mmc->caps2 |= MMC_CAP2_NO_WRITE_PROTECT; 1077 } 1078 1079 struct tmio_mmc_host *tmio_mmc_host_alloc(struct platform_device *pdev, 1080 struct tmio_mmc_data *pdata) 1081 { 1082 struct tmio_mmc_host *host; 1083 struct mmc_host *mmc; 1084 void __iomem *ctl; 1085 int ret; 1086 1087 ctl = devm_platform_ioremap_resource(pdev, 0); 1088 if (IS_ERR(ctl)) 1089 return ERR_CAST(ctl); 1090 1091 mmc = mmc_alloc_host(sizeof(struct tmio_mmc_host), &pdev->dev); 1092 if (!mmc) 1093 return ERR_PTR(-ENOMEM); 1094 1095 host = mmc_priv(mmc); 1096 host->ctl = ctl; 1097 host->mmc = mmc; 1098 host->pdev = pdev; 1099 host->pdata = pdata; 1100 host->ops = tmio_mmc_ops; 1101 mmc->ops = &host->ops; 1102 1103 ret = mmc_of_parse(host->mmc); 1104 if (ret) { 1105 host = ERR_PTR(ret); 1106 goto free; 1107 } 1108 1109 tmio_mmc_of_parse(pdev, mmc); 1110 1111 platform_set_drvdata(pdev, host); 1112 1113 return host; 1114 free: 1115 mmc_free_host(mmc); 1116 1117 return host; 1118 } 1119 EXPORT_SYMBOL_GPL(tmio_mmc_host_alloc); 1120 1121 void tmio_mmc_host_free(struct tmio_mmc_host *host) 1122 { 1123 mmc_free_host(host->mmc); 1124 } 1125 EXPORT_SYMBOL_GPL(tmio_mmc_host_free); 1126 1127 int tmio_mmc_host_probe(struct tmio_mmc_host *_host) 1128 { 1129 struct platform_device *pdev = _host->pdev; 1130 struct tmio_mmc_data *pdata = _host->pdata; 1131 struct mmc_host *mmc = _host->mmc; 1132 int ret; 1133 1134 /* 1135 * Check the sanity of mmc->f_min to prevent host->set_clock() from 1136 * looping forever... 1137 */ 1138 if (mmc->f_min == 0) 1139 return -EINVAL; 1140 1141 if (!(pdata->flags & TMIO_MMC_HAS_IDLE_WAIT)) 1142 _host->write16_hook = NULL; 1143 1144 if (pdata->flags & TMIO_MMC_USE_BUSY_TIMEOUT && !_host->get_timeout_cycles) 1145 _host->get_timeout_cycles = tmio_mmc_get_timeout_cycles; 1146 1147 _host->set_pwr = pdata->set_pwr; 1148 1149 ret = tmio_mmc_init_ocr(_host); 1150 if (ret < 0) 1151 return ret; 1152 1153 /* 1154 * Look for a card detect GPIO, if it fails with anything 1155 * else than a probe deferral, just live without it. 1156 */ 1157 ret = mmc_gpiod_request_cd(mmc, "cd", 0, false, 0); 1158 if (ret == -EPROBE_DEFER) 1159 return ret; 1160 1161 mmc->caps |= MMC_CAP_4_BIT_DATA | pdata->capabilities; 1162 mmc->caps2 |= pdata->capabilities2; 1163 mmc->max_segs = pdata->max_segs ? : 32; 1164 mmc->max_blk_size = TMIO_MAX_BLK_SIZE; 1165 mmc->max_blk_count = pdata->max_blk_count ? : 1166 (PAGE_SIZE / mmc->max_blk_size) * mmc->max_segs; 1167 mmc->max_req_size = min_t(size_t, 1168 mmc->max_blk_size * mmc->max_blk_count, 1169 dma_max_mapping_size(&pdev->dev)); 1170 mmc->max_seg_size = mmc->max_req_size; 1171 1172 if (mmc_can_gpio_ro(mmc)) 1173 _host->ops.get_ro = mmc_gpio_get_ro; 1174 1175 if (mmc_can_gpio_cd(mmc)) 1176 _host->ops.get_cd = mmc_gpio_get_cd; 1177 1178 _host->native_hotplug = !(mmc_can_gpio_cd(mmc) || 1179 mmc->caps & MMC_CAP_NEEDS_POLL || 1180 !mmc_card_is_removable(mmc)); 1181 1182 /* 1183 * While using internal tmio hardware logic for card detection, we need 1184 * to ensure it stays powered for it to work. 1185 */ 1186 if (_host->native_hotplug) 1187 pm_runtime_get_noresume(&pdev->dev); 1188 1189 _host->sdio_irq_enabled = false; 1190 if (pdata->flags & TMIO_MMC_SDIO_IRQ) 1191 _host->sdio_irq_mask = TMIO_SDIO_MASK_ALL; 1192 1193 if (!_host->sdcard_irq_mask_all) 1194 _host->sdcard_irq_mask_all = TMIO_MASK_ALL; 1195 1196 _host->set_clock(_host, 0); 1197 tmio_mmc_reset(_host); 1198 1199 spin_lock_init(&_host->lock); 1200 mutex_init(&_host->ios_lock); 1201 1202 /* Init delayed work for request timeouts */ 1203 INIT_DELAYED_WORK(&_host->delayed_reset_work, tmio_mmc_reset_work); 1204 INIT_WORK(&_host->done, tmio_mmc_done_work); 1205 1206 /* See if we also get DMA */ 1207 tmio_mmc_request_dma(_host, pdata); 1208 1209 pm_runtime_get_noresume(&pdev->dev); 1210 pm_runtime_set_active(&pdev->dev); 1211 pm_runtime_set_autosuspend_delay(&pdev->dev, 50); 1212 pm_runtime_use_autosuspend(&pdev->dev); 1213 pm_runtime_enable(&pdev->dev); 1214 1215 ret = mmc_add_host(mmc); 1216 if (ret) 1217 goto remove_host; 1218 1219 dev_pm_qos_expose_latency_limit(&pdev->dev, 100); 1220 pm_runtime_put(&pdev->dev); 1221 1222 return 0; 1223 1224 remove_host: 1225 pm_runtime_put_noidle(&pdev->dev); 1226 tmio_mmc_host_remove(_host); 1227 return ret; 1228 } 1229 EXPORT_SYMBOL_GPL(tmio_mmc_host_probe); 1230 1231 void tmio_mmc_host_remove(struct tmio_mmc_host *host) 1232 { 1233 struct platform_device *pdev = host->pdev; 1234 struct mmc_host *mmc = host->mmc; 1235 1236 pm_runtime_get_sync(&pdev->dev); 1237 1238 if (host->pdata->flags & TMIO_MMC_SDIO_IRQ) 1239 sd_ctrl_write16(host, CTL_TRANSACTION_CTL, 0x0000); 1240 1241 dev_pm_qos_hide_latency_limit(&pdev->dev); 1242 1243 mmc_remove_host(mmc); 1244 cancel_work_sync(&host->done); 1245 cancel_delayed_work_sync(&host->delayed_reset_work); 1246 tmio_mmc_release_dma(host); 1247 tmio_mmc_disable_mmc_irqs(host, host->sdcard_irq_mask_all); 1248 1249 if (host->native_hotplug) 1250 pm_runtime_put_noidle(&pdev->dev); 1251 1252 pm_runtime_disable(&pdev->dev); 1253 pm_runtime_dont_use_autosuspend(&pdev->dev); 1254 pm_runtime_put_noidle(&pdev->dev); 1255 } 1256 EXPORT_SYMBOL_GPL(tmio_mmc_host_remove); 1257 1258 #ifdef CONFIG_PM 1259 static int tmio_mmc_clk_enable(struct tmio_mmc_host *host) 1260 { 1261 if (!host->clk_enable) 1262 return -ENOTSUPP; 1263 1264 return host->clk_enable(host); 1265 } 1266 1267 static void tmio_mmc_clk_disable(struct tmio_mmc_host *host) 1268 { 1269 if (host->clk_disable) 1270 host->clk_disable(host); 1271 } 1272 1273 int tmio_mmc_host_runtime_suspend(struct device *dev) 1274 { 1275 struct tmio_mmc_host *host = dev_get_drvdata(dev); 1276 1277 tmio_mmc_disable_mmc_irqs(host, host->sdcard_irq_mask_all); 1278 1279 if (host->clk_cache) 1280 host->set_clock(host, 0); 1281 1282 tmio_mmc_clk_disable(host); 1283 1284 return 0; 1285 } 1286 EXPORT_SYMBOL_GPL(tmio_mmc_host_runtime_suspend); 1287 1288 int tmio_mmc_host_runtime_resume(struct device *dev) 1289 { 1290 struct tmio_mmc_host *host = dev_get_drvdata(dev); 1291 1292 tmio_mmc_clk_enable(host); 1293 tmio_mmc_reset(host); 1294 1295 if (host->clk_cache) 1296 host->set_clock(host, host->clk_cache); 1297 1298 if (host->native_hotplug) 1299 tmio_mmc_enable_mmc_irqs(host, 1300 TMIO_STAT_CARD_REMOVE | TMIO_STAT_CARD_INSERT); 1301 1302 tmio_mmc_enable_dma(host, true); 1303 1304 return 0; 1305 } 1306 EXPORT_SYMBOL_GPL(tmio_mmc_host_runtime_resume); 1307 #endif 1308 1309 MODULE_LICENSE("GPL v2"); 1310