1 /* SPDX-License-Identifier: GPL-2.0-or-later */ 2 /* 3 * linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface driver 4 * 5 * Header file for Host Controller registers and I/O accessors. 6 * 7 * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved. 8 */ 9 #ifndef __SDHCI_HW_H 10 #define __SDHCI_HW_H 11 12 #include <linux/scatterlist.h> 13 #include <linux/compiler.h> 14 #include <linux/types.h> 15 #include <linux/io.h> 16 #include <linux/leds.h> 17 #include <linux/interrupt.h> 18 19 #include <linux/mmc/host.h> 20 21 /* 22 * Controller registers 23 */ 24 25 #define SDHCI_DMA_ADDRESS 0x00 26 #define SDHCI_ARGUMENT2 SDHCI_DMA_ADDRESS 27 #define SDHCI_32BIT_BLK_CNT SDHCI_DMA_ADDRESS 28 29 #define SDHCI_BLOCK_SIZE 0x04 30 #define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF)) 31 32 #define SDHCI_BLOCK_COUNT 0x06 33 34 #define SDHCI_ARGUMENT 0x08 35 36 #define SDHCI_TRANSFER_MODE 0x0C 37 #define SDHCI_TRNS_DMA 0x01 38 #define SDHCI_TRNS_BLK_CNT_EN 0x02 39 #define SDHCI_TRNS_AUTO_CMD12 0x04 40 #define SDHCI_TRNS_AUTO_CMD23 0x08 41 #define SDHCI_TRNS_AUTO_SEL 0x0C 42 #define SDHCI_TRNS_READ 0x10 43 #define SDHCI_TRNS_MULTI 0x20 44 45 #define SDHCI_COMMAND 0x0E 46 #define SDHCI_CMD_RESP_MASK 0x03 47 #define SDHCI_CMD_CRC 0x08 48 #define SDHCI_CMD_INDEX 0x10 49 #define SDHCI_CMD_DATA 0x20 50 #define SDHCI_CMD_ABORTCMD 0xC0 51 52 #define SDHCI_CMD_RESP_NONE 0x00 53 #define SDHCI_CMD_RESP_LONG 0x01 54 #define SDHCI_CMD_RESP_SHORT 0x02 55 #define SDHCI_CMD_RESP_SHORT_BUSY 0x03 56 57 #define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff)) 58 #define SDHCI_GET_CMD(c) ((c>>8) & 0x3f) 59 60 #define SDHCI_RESPONSE 0x10 61 62 #define SDHCI_BUFFER 0x20 63 64 #define SDHCI_PRESENT_STATE 0x24 65 #define SDHCI_CMD_INHIBIT 0x00000001 66 #define SDHCI_DATA_INHIBIT 0x00000002 67 #define SDHCI_DOING_WRITE 0x00000100 68 #define SDHCI_DOING_READ 0x00000200 69 #define SDHCI_SPACE_AVAILABLE 0x00000400 70 #define SDHCI_DATA_AVAILABLE 0x00000800 71 #define SDHCI_CARD_PRESENT 0x00010000 72 #define SDHCI_CARD_PRES_SHIFT 16 73 #define SDHCI_CD_STABLE 0x00020000 74 #define SDHCI_CD_LVL 0x00040000 75 #define SDHCI_CD_LVL_SHIFT 18 76 #define SDHCI_WRITE_PROTECT 0x00080000 77 #define SDHCI_DATA_LVL_MASK 0x00F00000 78 #define SDHCI_DATA_LVL_SHIFT 20 79 #define SDHCI_DATA_0_LVL_MASK 0x00100000 80 #define SDHCI_CMD_LVL 0x01000000 81 82 #define SDHCI_HOST_CONTROL 0x28 83 #define SDHCI_CTRL_LED 0x01 84 #define SDHCI_CTRL_4BITBUS 0x02 85 #define SDHCI_CTRL_HISPD 0x04 86 #define SDHCI_CTRL_DMA_MASK 0x18 87 #define SDHCI_CTRL_SDMA 0x00 88 #define SDHCI_CTRL_ADMA1 0x08 89 #define SDHCI_CTRL_ADMA32 0x10 90 #define SDHCI_CTRL_ADMA64 0x18 91 #define SDHCI_CTRL_ADMA3 0x18 92 #define SDHCI_CTRL_8BITBUS 0x20 93 #define SDHCI_CTRL_CDTEST_INS 0x40 94 #define SDHCI_CTRL_CDTEST_EN 0x80 95 96 #define SDHCI_POWER_CONTROL 0x29 97 #define SDHCI_POWER_ON 0x01 98 #define SDHCI_POWER_180 0x0A 99 #define SDHCI_POWER_300 0x0C 100 #define SDHCI_POWER_330 0x0E 101 102 #define SDHCI_BLOCK_GAP_CONTROL 0x2A 103 104 #define SDHCI_WAKE_UP_CONTROL 0x2B 105 #define SDHCI_WAKE_ON_INT 0x01 106 #define SDHCI_WAKE_ON_INSERT 0x02 107 #define SDHCI_WAKE_ON_REMOVE 0x04 108 109 #define SDHCI_CLOCK_CONTROL 0x2C 110 #define SDHCI_DIVIDER_SHIFT 8 111 #define SDHCI_DIVIDER_HI_SHIFT 6 112 #define SDHCI_DIV_MASK 0xFF 113 #define SDHCI_DIV_MASK_LEN 8 114 #define SDHCI_DIV_HI_MASK 0x300 115 #define SDHCI_PROG_CLOCK_MODE 0x0020 116 #define SDHCI_CLOCK_CARD_EN 0x0004 117 #define SDHCI_CLOCK_PLL_EN 0x0008 118 #define SDHCI_CLOCK_INT_STABLE 0x0002 119 #define SDHCI_CLOCK_INT_EN 0x0001 120 121 #define SDHCI_TIMEOUT_CONTROL 0x2E 122 123 #define SDHCI_SOFTWARE_RESET 0x2F 124 #define SDHCI_RESET_ALL 0x01 125 #define SDHCI_RESET_CMD 0x02 126 #define SDHCI_RESET_DATA 0x04 127 128 #define SDHCI_INT_STATUS 0x30 129 #define SDHCI_INT_ENABLE 0x34 130 #define SDHCI_SIGNAL_ENABLE 0x38 131 #define SDHCI_INT_RESPONSE 0x00000001 132 #define SDHCI_INT_DATA_END 0x00000002 133 #define SDHCI_INT_BLK_GAP 0x00000004 134 #define SDHCI_INT_DMA_END 0x00000008 135 #define SDHCI_INT_SPACE_AVAIL 0x00000010 136 #define SDHCI_INT_DATA_AVAIL 0x00000020 137 #define SDHCI_INT_CARD_INSERT 0x00000040 138 #define SDHCI_INT_CARD_REMOVE 0x00000080 139 #define SDHCI_INT_CARD_INT 0x00000100 140 #define SDHCI_INT_RETUNE 0x00001000 141 #define SDHCI_INT_CQE 0x00004000 142 #define SDHCI_INT_ERROR 0x00008000 143 #define SDHCI_INT_TIMEOUT 0x00010000 144 #define SDHCI_INT_CRC 0x00020000 145 #define SDHCI_INT_END_BIT 0x00040000 146 #define SDHCI_INT_INDEX 0x00080000 147 #define SDHCI_INT_DATA_TIMEOUT 0x00100000 148 #define SDHCI_INT_DATA_CRC 0x00200000 149 #define SDHCI_INT_DATA_END_BIT 0x00400000 150 #define SDHCI_INT_BUS_POWER 0x00800000 151 #define SDHCI_INT_AUTO_CMD_ERR 0x01000000 152 #define SDHCI_INT_ADMA_ERROR 0x02000000 153 154 #define SDHCI_INT_NORMAL_MASK 0x00007FFF 155 #define SDHCI_INT_ERROR_MASK 0xFFFF8000 156 157 #define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \ 158 SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX | \ 159 SDHCI_INT_AUTO_CMD_ERR) 160 #define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \ 161 SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \ 162 SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \ 163 SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR | \ 164 SDHCI_INT_BLK_GAP) 165 #define SDHCI_INT_ALL_MASK ((unsigned int)-1) 166 167 #define SDHCI_CQE_INT_ERR_MASK ( \ 168 SDHCI_INT_ADMA_ERROR | SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT | \ 169 SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX | \ 170 SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT) 171 172 #define SDHCI_CQE_INT_MASK (SDHCI_CQE_INT_ERR_MASK | SDHCI_INT_CQE) 173 174 #define SDHCI_AUTO_CMD_STATUS 0x3C 175 #define SDHCI_AUTO_CMD_TIMEOUT 0x00000002 176 #define SDHCI_AUTO_CMD_CRC 0x00000004 177 #define SDHCI_AUTO_CMD_END_BIT 0x00000008 178 #define SDHCI_AUTO_CMD_INDEX 0x00000010 179 180 #define SDHCI_HOST_CONTROL2 0x3E 181 #define SDHCI_CTRL_UHS_MASK 0x0007 182 #define SDHCI_CTRL_UHS_SDR12 0x0000 183 #define SDHCI_CTRL_UHS_SDR25 0x0001 184 #define SDHCI_CTRL_UHS_SDR50 0x0002 185 #define SDHCI_CTRL_UHS_SDR104 0x0003 186 #define SDHCI_CTRL_UHS_DDR50 0x0004 187 #define SDHCI_CTRL_HS400 0x0005 /* Non-standard */ 188 #define SDHCI_CTRL_VDD_180 0x0008 189 #define SDHCI_CTRL_DRV_TYPE_MASK 0x0030 190 #define SDHCI_CTRL_DRV_TYPE_B 0x0000 191 #define SDHCI_CTRL_DRV_TYPE_A 0x0010 192 #define SDHCI_CTRL_DRV_TYPE_C 0x0020 193 #define SDHCI_CTRL_DRV_TYPE_D 0x0030 194 #define SDHCI_CTRL_EXEC_TUNING 0x0040 195 #define SDHCI_CTRL_TUNED_CLK 0x0080 196 #define SDHCI_CMD23_ENABLE 0x0800 197 #define SDHCI_CTRL_V4_MODE 0x1000 198 #define SDHCI_CTRL_64BIT_ADDR 0x2000 199 #define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000 200 201 #define SDHCI_CAPABILITIES 0x40 202 #define SDHCI_TIMEOUT_CLK_MASK 0x0000003F 203 #define SDHCI_TIMEOUT_CLK_SHIFT 0 204 #define SDHCI_TIMEOUT_CLK_UNIT 0x00000080 205 #define SDHCI_CLOCK_BASE_MASK 0x00003F00 206 #define SDHCI_CLOCK_V3_BASE_MASK 0x0000FF00 207 #define SDHCI_CLOCK_BASE_SHIFT 8 208 #define SDHCI_MAX_BLOCK_MASK 0x00030000 209 #define SDHCI_MAX_BLOCK_SHIFT 16 210 #define SDHCI_CAN_DO_8BIT 0x00040000 211 #define SDHCI_CAN_DO_ADMA2 0x00080000 212 #define SDHCI_CAN_DO_ADMA1 0x00100000 213 #define SDHCI_CAN_DO_HISPD 0x00200000 214 #define SDHCI_CAN_DO_SDMA 0x00400000 215 #define SDHCI_CAN_DO_SUSPEND 0x00800000 216 #define SDHCI_CAN_VDD_330 0x01000000 217 #define SDHCI_CAN_VDD_300 0x02000000 218 #define SDHCI_CAN_VDD_180 0x04000000 219 #define SDHCI_CAN_64BIT_V4 0x08000000 220 #define SDHCI_CAN_64BIT 0x10000000 221 222 #define SDHCI_SUPPORT_SDR50 0x00000001 223 #define SDHCI_SUPPORT_SDR104 0x00000002 224 #define SDHCI_SUPPORT_DDR50 0x00000004 225 #define SDHCI_DRIVER_TYPE_A 0x00000010 226 #define SDHCI_DRIVER_TYPE_C 0x00000020 227 #define SDHCI_DRIVER_TYPE_D 0x00000040 228 #define SDHCI_RETUNING_TIMER_COUNT_MASK 0x00000F00 229 #define SDHCI_RETUNING_TIMER_COUNT_SHIFT 8 230 #define SDHCI_USE_SDR50_TUNING 0x00002000 231 #define SDHCI_RETUNING_MODE_MASK 0x0000C000 232 #define SDHCI_RETUNING_MODE_SHIFT 14 233 #define SDHCI_CLOCK_MUL_MASK 0x00FF0000 234 #define SDHCI_CLOCK_MUL_SHIFT 16 235 #define SDHCI_CAN_DO_ADMA3 0x08000000 236 #define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */ 237 238 #define SDHCI_CAPABILITIES_1 0x44 239 240 #define SDHCI_MAX_CURRENT 0x48 241 #define SDHCI_MAX_CURRENT_LIMIT 0xFF 242 #define SDHCI_MAX_CURRENT_330_MASK 0x0000FF 243 #define SDHCI_MAX_CURRENT_330_SHIFT 0 244 #define SDHCI_MAX_CURRENT_300_MASK 0x00FF00 245 #define SDHCI_MAX_CURRENT_300_SHIFT 8 246 #define SDHCI_MAX_CURRENT_180_MASK 0xFF0000 247 #define SDHCI_MAX_CURRENT_180_SHIFT 16 248 #define SDHCI_MAX_CURRENT_MULTIPLIER 4 249 250 /* 4C-4F reserved for more max current */ 251 252 #define SDHCI_SET_ACMD12_ERROR 0x50 253 #define SDHCI_SET_INT_ERROR 0x52 254 255 #define SDHCI_ADMA_ERROR 0x54 256 257 /* 55-57 reserved */ 258 259 #define SDHCI_ADMA_ADDRESS 0x58 260 #define SDHCI_ADMA_ADDRESS_HI 0x5C 261 262 /* 60-FB reserved */ 263 264 #define SDHCI_PRESET_FOR_SDR12 0x66 265 #define SDHCI_PRESET_FOR_SDR25 0x68 266 #define SDHCI_PRESET_FOR_SDR50 0x6A 267 #define SDHCI_PRESET_FOR_SDR104 0x6C 268 #define SDHCI_PRESET_FOR_DDR50 0x6E 269 #define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */ 270 #define SDHCI_PRESET_DRV_MASK 0xC000 271 #define SDHCI_PRESET_DRV_SHIFT 14 272 #define SDHCI_PRESET_CLKGEN_SEL_MASK 0x400 273 #define SDHCI_PRESET_CLKGEN_SEL_SHIFT 10 274 #define SDHCI_PRESET_SDCLK_FREQ_MASK 0x3FF 275 #define SDHCI_PRESET_SDCLK_FREQ_SHIFT 0 276 277 #define SDHCI_SLOT_INT_STATUS 0xFC 278 279 #define SDHCI_HOST_VERSION 0xFE 280 #define SDHCI_VENDOR_VER_MASK 0xFF00 281 #define SDHCI_VENDOR_VER_SHIFT 8 282 #define SDHCI_SPEC_VER_MASK 0x00FF 283 #define SDHCI_SPEC_VER_SHIFT 0 284 #define SDHCI_SPEC_100 0 285 #define SDHCI_SPEC_200 1 286 #define SDHCI_SPEC_300 2 287 #define SDHCI_SPEC_400 3 288 #define SDHCI_SPEC_410 4 289 #define SDHCI_SPEC_420 5 290 291 /* 292 * End of controller registers. 293 */ 294 295 #define SDHCI_MAX_DIV_SPEC_200 256 296 #define SDHCI_MAX_DIV_SPEC_300 2046 297 298 /* 299 * Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2. 300 */ 301 #define SDHCI_DEFAULT_BOUNDARY_SIZE (512 * 1024) 302 #define SDHCI_DEFAULT_BOUNDARY_ARG (ilog2(SDHCI_DEFAULT_BOUNDARY_SIZE) - 12) 303 304 /* ADMA2 32-bit DMA descriptor size */ 305 #define SDHCI_ADMA2_32_DESC_SZ 8 306 307 /* ADMA2 32-bit descriptor */ 308 struct sdhci_adma2_32_desc { 309 __le16 cmd; 310 __le16 len; 311 __le32 addr; 312 } __packed __aligned(4); 313 314 /* ADMA2 data alignment */ 315 #define SDHCI_ADMA2_ALIGN 4 316 #define SDHCI_ADMA2_MASK (SDHCI_ADMA2_ALIGN - 1) 317 318 /* 319 * ADMA2 descriptor alignment. Some controllers (e.g. Intel) require 8 byte 320 * alignment for the descriptor table even in 32-bit DMA mode. Memory 321 * allocation is at least 8 byte aligned anyway, so just stipulate 8 always. 322 */ 323 #define SDHCI_ADMA2_DESC_ALIGN 8 324 325 /* 326 * ADMA2 64-bit DMA descriptor size 327 * According to SD Host Controller spec v4.10, there are two kinds of 328 * descriptors for 64-bit addressing mode: 96-bit Descriptor and 128-bit 329 * Descriptor, if Host Version 4 Enable is set in the Host Control 2 330 * register, 128-bit Descriptor will be selected. 331 */ 332 #define SDHCI_ADMA2_64_DESC_SZ(host) ((host)->v4_mode ? 16 : 12) 333 334 /* 335 * ADMA2 64-bit descriptor. Note 12-byte descriptor can't always be 8-byte 336 * aligned. 337 */ 338 struct sdhci_adma2_64_desc { 339 __le16 cmd; 340 __le16 len; 341 __le32 addr_lo; 342 __le32 addr_hi; 343 } __packed __aligned(4); 344 345 #define ADMA2_TRAN_VALID 0x21 346 #define ADMA2_NOP_END_VALID 0x3 347 #define ADMA2_END 0x2 348 349 /* 350 * Maximum segments assuming a 512KiB maximum requisition size and a minimum 351 * 4KiB page size. 352 */ 353 #define SDHCI_MAX_SEGS 128 354 355 /* Allow for a a command request and a data request at the same time */ 356 #define SDHCI_MAX_MRQS 2 357 358 /* 359 * 48bit command and 136 bit response in 100KHz clock could take upto 2.48ms. 360 * However since the start time of the command, the time between 361 * command and response, and the time between response and start of data is 362 * not known, set the command transfer time to 10ms. 363 */ 364 #define MMC_CMD_TRANSFER_TIME (10 * NSEC_PER_MSEC) /* max 10 ms */ 365 366 enum sdhci_cookie { 367 COOKIE_UNMAPPED, 368 COOKIE_PRE_MAPPED, /* mapped by sdhci_pre_req() */ 369 COOKIE_MAPPED, /* mapped by sdhci_prepare_data() */ 370 }; 371 372 struct sdhci_host { 373 /* Data set by hardware interface driver */ 374 const char *hw_name; /* Hardware bus name */ 375 376 unsigned int quirks; /* Deviations from spec. */ 377 378 /* Controller doesn't honor resets unless we touch the clock register */ 379 #define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0) 380 /* Controller has bad caps bits, but really supports DMA */ 381 #define SDHCI_QUIRK_FORCE_DMA (1<<1) 382 /* Controller doesn't like to be reset when there is no card inserted. */ 383 #define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2) 384 /* Controller doesn't like clearing the power reg before a change */ 385 #define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3) 386 /* Controller has flaky internal state so reset it on each ios change */ 387 #define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4) 388 /* Controller has an unusable DMA engine */ 389 #define SDHCI_QUIRK_BROKEN_DMA (1<<5) 390 /* Controller has an unusable ADMA engine */ 391 #define SDHCI_QUIRK_BROKEN_ADMA (1<<6) 392 /* Controller can only DMA from 32-bit aligned addresses */ 393 #define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7) 394 /* Controller can only DMA chunk sizes that are a multiple of 32 bits */ 395 #define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8) 396 /* Controller can only ADMA chunks that are a multiple of 32 bits */ 397 #define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9) 398 /* Controller needs to be reset after each request to stay stable */ 399 #define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10) 400 /* Controller needs voltage and power writes to happen separately */ 401 #define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11) 402 /* Controller provides an incorrect timeout value for transfers */ 403 #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12) 404 /* Controller has an issue with buffer bits for small transfers */ 405 #define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13) 406 /* Controller does not provide transfer-complete interrupt when not busy */ 407 #define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14) 408 /* Controller has unreliable card detection */ 409 #define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15) 410 /* Controller reports inverted write-protect state */ 411 #define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16) 412 /* Controller does not like fast PIO transfers */ 413 #define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18) 414 /* Controller does not have a LED */ 415 #define SDHCI_QUIRK_NO_LED (1<<19) 416 /* Controller has to be forced to use block size of 2048 bytes */ 417 #define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20) 418 /* Controller cannot do multi-block transfers */ 419 #define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21) 420 /* Controller can only handle 1-bit data transfers */ 421 #define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22) 422 /* Controller needs 10ms delay between applying power and clock */ 423 #define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23) 424 /* Controller uses SDCLK instead of TMCLK for data timeouts */ 425 #define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24) 426 /* Controller reports wrong base clock capability */ 427 #define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25) 428 /* Controller cannot support End Attribute in NOP ADMA descriptor */ 429 #define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26) 430 /* Controller is missing device caps. Use caps provided by host */ 431 #define SDHCI_QUIRK_MISSING_CAPS (1<<27) 432 /* Controller uses Auto CMD12 command to stop the transfer */ 433 #define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28) 434 /* Controller doesn't have HISPD bit field in HI-SPEED SD card */ 435 #define SDHCI_QUIRK_NO_HISPD_BIT (1<<29) 436 /* Controller treats ADMA descriptors with length 0000h incorrectly */ 437 #define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC (1<<30) 438 /* The read-only detection via SDHCI_PRESENT_STATE register is unstable */ 439 #define SDHCI_QUIRK_UNSTABLE_RO_DETECT (1<<31) 440 441 unsigned int quirks2; /* More deviations from spec. */ 442 443 #define SDHCI_QUIRK2_HOST_OFF_CARD_ON (1<<0) 444 #define SDHCI_QUIRK2_HOST_NO_CMD23 (1<<1) 445 /* The system physically doesn't support 1.8v, even if the host does */ 446 #define SDHCI_QUIRK2_NO_1_8_V (1<<2) 447 #define SDHCI_QUIRK2_PRESET_VALUE_BROKEN (1<<3) 448 #define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON (1<<4) 449 /* Controller has a non-standard host control register */ 450 #define SDHCI_QUIRK2_BROKEN_HOST_CONTROL (1<<5) 451 /* Controller does not support HS200 */ 452 #define SDHCI_QUIRK2_BROKEN_HS200 (1<<6) 453 /* Controller does not support DDR50 */ 454 #define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7) 455 /* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */ 456 #define SDHCI_QUIRK2_STOP_WITH_TC (1<<8) 457 /* Controller does not support 64-bit DMA */ 458 #define SDHCI_QUIRK2_BROKEN_64_BIT_DMA (1<<9) 459 /* need clear transfer mode register before send cmd */ 460 #define SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD (1<<10) 461 /* Capability register bit-63 indicates HS400 support */ 462 #define SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 (1<<11) 463 /* forced tuned clock */ 464 #define SDHCI_QUIRK2_TUNING_WORK_AROUND (1<<12) 465 /* disable the block count for single block transactions */ 466 #define SDHCI_QUIRK2_SUPPORT_SINGLE (1<<13) 467 /* Controller broken with using ACMD23 */ 468 #define SDHCI_QUIRK2_ACMD23_BROKEN (1<<14) 469 /* Broken Clock divider zero in controller */ 470 #define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN (1<<15) 471 /* Controller has CRC in 136 bit Command Response */ 472 #define SDHCI_QUIRK2_RSP_136_HAS_CRC (1<<16) 473 /* 474 * Disable HW timeout if the requested timeout is more than the maximum 475 * obtainable timeout. 476 */ 477 #define SDHCI_QUIRK2_DISABLE_HW_TIMEOUT (1<<17) 478 /* 479 * 32-bit block count may not support eMMC where upper bits of CMD23 are used 480 * for other purposes. Consequently we support 16-bit block count by default. 481 * Otherwise, SDHCI_QUIRK2_USE_32BIT_BLK_CNT can be selected to use 32-bit 482 * block count. 483 */ 484 #define SDHCI_QUIRK2_USE_32BIT_BLK_CNT (1<<18) 485 486 int irq; /* Device IRQ */ 487 void __iomem *ioaddr; /* Mapped address */ 488 char *bounce_buffer; /* For packing SDMA reads/writes */ 489 dma_addr_t bounce_addr; 490 unsigned int bounce_buffer_size; 491 492 const struct sdhci_ops *ops; /* Low level hw interface */ 493 494 /* Internal data */ 495 struct mmc_host *mmc; /* MMC structure */ 496 struct mmc_host_ops mmc_host_ops; /* MMC host ops */ 497 u64 dma_mask; /* custom DMA mask */ 498 499 #if IS_ENABLED(CONFIG_LEDS_CLASS) 500 struct led_classdev led; /* LED control */ 501 char led_name[32]; 502 #endif 503 504 spinlock_t lock; /* Mutex */ 505 506 int flags; /* Host attributes */ 507 #define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */ 508 #define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */ 509 #define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */ 510 #define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */ 511 #define SDHCI_SDR50_NEEDS_TUNING (1<<4) /* SDR50 needs tuning */ 512 #define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */ 513 #define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */ 514 #define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */ 515 #define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */ 516 #define SDHCI_HS400_TUNING (1<<13) /* Tuning for HS400 */ 517 #define SDHCI_SIGNALING_330 (1<<14) /* Host is capable of 3.3V signaling */ 518 #define SDHCI_SIGNALING_180 (1<<15) /* Host is capable of 1.8V signaling */ 519 #define SDHCI_SIGNALING_120 (1<<16) /* Host is capable of 1.2V signaling */ 520 521 unsigned int version; /* SDHCI spec. version */ 522 523 unsigned int max_clk; /* Max possible freq (MHz) */ 524 unsigned int timeout_clk; /* Timeout freq (KHz) */ 525 unsigned int clk_mul; /* Clock Muliplier value */ 526 527 unsigned int clock; /* Current clock (MHz) */ 528 u8 pwr; /* Current voltage */ 529 530 bool runtime_suspended; /* Host is runtime suspended */ 531 bool bus_on; /* Bus power prevents runtime suspend */ 532 bool preset_enabled; /* Preset is enabled */ 533 bool pending_reset; /* Cmd/data reset is pending */ 534 bool irq_wake_enabled; /* IRQ wakeup is enabled */ 535 bool v4_mode; /* Host Version 4 Enable */ 536 537 struct mmc_request *mrqs_done[SDHCI_MAX_MRQS]; /* Requests done */ 538 struct mmc_command *cmd; /* Current command */ 539 struct mmc_command *data_cmd; /* Current data command */ 540 struct mmc_data *data; /* Current data request */ 541 unsigned int data_early:1; /* Data finished before cmd */ 542 543 struct sg_mapping_iter sg_miter; /* SG state for PIO */ 544 unsigned int blocks; /* remaining PIO blocks */ 545 546 int sg_count; /* Mapped sg entries */ 547 548 void *adma_table; /* ADMA descriptor table */ 549 void *align_buffer; /* Bounce buffer */ 550 551 size_t adma_table_sz; /* ADMA descriptor table size */ 552 size_t align_buffer_sz; /* Bounce buffer size */ 553 554 dma_addr_t adma_addr; /* Mapped ADMA descr. table */ 555 dma_addr_t align_addr; /* Mapped bounce buffer */ 556 557 unsigned int desc_sz; /* ADMA descriptor size */ 558 559 struct workqueue_struct *complete_wq; /* Request completion wq */ 560 struct work_struct complete_work; /* Request completion work */ 561 562 struct timer_list timer; /* Timer for timeouts */ 563 struct timer_list data_timer; /* Timer for data timeouts */ 564 565 u32 caps; /* CAPABILITY_0 */ 566 u32 caps1; /* CAPABILITY_1 */ 567 bool read_caps; /* Capability flags have been read */ 568 569 unsigned int ocr_avail_sdio; /* OCR bit masks */ 570 unsigned int ocr_avail_sd; 571 unsigned int ocr_avail_mmc; 572 u32 ocr_mask; /* available voltages */ 573 574 unsigned timing; /* Current timing */ 575 576 u32 thread_isr; 577 578 /* cached registers */ 579 u32 ier; 580 581 bool cqe_on; /* CQE is operating */ 582 u32 cqe_ier; /* CQE interrupt mask */ 583 u32 cqe_err_ier; /* CQE error interrupt mask */ 584 585 wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read Ready interrupt */ 586 unsigned int tuning_done; /* Condition flag set when CMD19 succeeds */ 587 588 unsigned int tuning_count; /* Timer count for re-tuning */ 589 unsigned int tuning_mode; /* Re-tuning mode supported by host */ 590 unsigned int tuning_err; /* Error code for re-tuning */ 591 #define SDHCI_TUNING_MODE_1 0 592 #define SDHCI_TUNING_MODE_2 1 593 #define SDHCI_TUNING_MODE_3 2 594 /* Delay (ms) between tuning commands */ 595 int tuning_delay; 596 int tuning_loop_count; 597 598 /* Host SDMA buffer boundary. */ 599 u32 sdma_boundary; 600 601 /* Host ADMA table count */ 602 u32 adma_table_cnt; 603 604 u64 data_timeout; 605 606 unsigned long private[0] ____cacheline_aligned; 607 }; 608 609 struct sdhci_ops { 610 #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS 611 u32 (*read_l)(struct sdhci_host *host, int reg); 612 u16 (*read_w)(struct sdhci_host *host, int reg); 613 u8 (*read_b)(struct sdhci_host *host, int reg); 614 void (*write_l)(struct sdhci_host *host, u32 val, int reg); 615 void (*write_w)(struct sdhci_host *host, u16 val, int reg); 616 void (*write_b)(struct sdhci_host *host, u8 val, int reg); 617 #endif 618 619 void (*set_clock)(struct sdhci_host *host, unsigned int clock); 620 void (*set_power)(struct sdhci_host *host, unsigned char mode, 621 unsigned short vdd); 622 623 u32 (*irq)(struct sdhci_host *host, u32 intmask); 624 625 int (*set_dma_mask)(struct sdhci_host *host); 626 int (*enable_dma)(struct sdhci_host *host); 627 unsigned int (*get_max_clock)(struct sdhci_host *host); 628 unsigned int (*get_min_clock)(struct sdhci_host *host); 629 /* get_timeout_clock should return clk rate in unit of Hz */ 630 unsigned int (*get_timeout_clock)(struct sdhci_host *host); 631 unsigned int (*get_max_timeout_count)(struct sdhci_host *host); 632 void (*set_timeout)(struct sdhci_host *host, 633 struct mmc_command *cmd); 634 void (*set_bus_width)(struct sdhci_host *host, int width); 635 void (*platform_send_init_74_clocks)(struct sdhci_host *host, 636 u8 power_mode); 637 unsigned int (*get_ro)(struct sdhci_host *host); 638 void (*reset)(struct sdhci_host *host, u8 mask); 639 int (*platform_execute_tuning)(struct sdhci_host *host, u32 opcode); 640 void (*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs); 641 void (*hw_reset)(struct sdhci_host *host); 642 void (*adma_workaround)(struct sdhci_host *host, u32 intmask); 643 void (*card_event)(struct sdhci_host *host); 644 void (*voltage_switch)(struct sdhci_host *host); 645 void (*adma_write_desc)(struct sdhci_host *host, void **desc, 646 dma_addr_t addr, int len, unsigned int cmd); 647 }; 648 649 #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS 650 651 static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg) 652 { 653 if (unlikely(host->ops->write_l)) 654 host->ops->write_l(host, val, reg); 655 else 656 writel(val, host->ioaddr + reg); 657 } 658 659 static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg) 660 { 661 if (unlikely(host->ops->write_w)) 662 host->ops->write_w(host, val, reg); 663 else 664 writew(val, host->ioaddr + reg); 665 } 666 667 static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg) 668 { 669 if (unlikely(host->ops->write_b)) 670 host->ops->write_b(host, val, reg); 671 else 672 writeb(val, host->ioaddr + reg); 673 } 674 675 static inline u32 sdhci_readl(struct sdhci_host *host, int reg) 676 { 677 if (unlikely(host->ops->read_l)) 678 return host->ops->read_l(host, reg); 679 else 680 return readl(host->ioaddr + reg); 681 } 682 683 static inline u16 sdhci_readw(struct sdhci_host *host, int reg) 684 { 685 if (unlikely(host->ops->read_w)) 686 return host->ops->read_w(host, reg); 687 else 688 return readw(host->ioaddr + reg); 689 } 690 691 static inline u8 sdhci_readb(struct sdhci_host *host, int reg) 692 { 693 if (unlikely(host->ops->read_b)) 694 return host->ops->read_b(host, reg); 695 else 696 return readb(host->ioaddr + reg); 697 } 698 699 #else 700 701 static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg) 702 { 703 writel(val, host->ioaddr + reg); 704 } 705 706 static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg) 707 { 708 writew(val, host->ioaddr + reg); 709 } 710 711 static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg) 712 { 713 writeb(val, host->ioaddr + reg); 714 } 715 716 static inline u32 sdhci_readl(struct sdhci_host *host, int reg) 717 { 718 return readl(host->ioaddr + reg); 719 } 720 721 static inline u16 sdhci_readw(struct sdhci_host *host, int reg) 722 { 723 return readw(host->ioaddr + reg); 724 } 725 726 static inline u8 sdhci_readb(struct sdhci_host *host, int reg) 727 { 728 return readb(host->ioaddr + reg); 729 } 730 731 #endif /* CONFIG_MMC_SDHCI_IO_ACCESSORS */ 732 733 struct sdhci_host *sdhci_alloc_host(struct device *dev, size_t priv_size); 734 void sdhci_free_host(struct sdhci_host *host); 735 736 static inline void *sdhci_priv(struct sdhci_host *host) 737 { 738 return host->private; 739 } 740 741 void sdhci_card_detect(struct sdhci_host *host); 742 void __sdhci_read_caps(struct sdhci_host *host, const u16 *ver, 743 const u32 *caps, const u32 *caps1); 744 int sdhci_setup_host(struct sdhci_host *host); 745 void sdhci_cleanup_host(struct sdhci_host *host); 746 int __sdhci_add_host(struct sdhci_host *host); 747 int sdhci_add_host(struct sdhci_host *host); 748 void sdhci_remove_host(struct sdhci_host *host, int dead); 749 void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd); 750 751 static inline void sdhci_read_caps(struct sdhci_host *host) 752 { 753 __sdhci_read_caps(host, NULL, NULL, NULL); 754 } 755 756 u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock, 757 unsigned int *actual_clock); 758 void sdhci_set_clock(struct sdhci_host *host, unsigned int clock); 759 void sdhci_enable_clk(struct sdhci_host *host, u16 clk); 760 void sdhci_set_power(struct sdhci_host *host, unsigned char mode, 761 unsigned short vdd); 762 void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode, 763 unsigned short vdd); 764 void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq); 765 void sdhci_set_bus_width(struct sdhci_host *host, int width); 766 void sdhci_reset(struct sdhci_host *host, u8 mask); 767 void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing); 768 int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode); 769 void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios); 770 int sdhci_start_signal_voltage_switch(struct mmc_host *mmc, 771 struct mmc_ios *ios); 772 void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable); 773 void sdhci_adma_write_desc(struct sdhci_host *host, void **desc, 774 dma_addr_t addr, int len, unsigned int cmd); 775 776 #ifdef CONFIG_PM 777 int sdhci_suspend_host(struct sdhci_host *host); 778 int sdhci_resume_host(struct sdhci_host *host); 779 int sdhci_runtime_suspend_host(struct sdhci_host *host); 780 int sdhci_runtime_resume_host(struct sdhci_host *host, int soft_reset); 781 #endif 782 783 void sdhci_cqe_enable(struct mmc_host *mmc); 784 void sdhci_cqe_disable(struct mmc_host *mmc, bool recovery); 785 bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error, 786 int *data_error); 787 788 void sdhci_dumpregs(struct sdhci_host *host); 789 void sdhci_enable_v4_mode(struct sdhci_host *host); 790 791 void sdhci_start_tuning(struct sdhci_host *host); 792 void sdhci_end_tuning(struct sdhci_host *host); 793 void sdhci_reset_tuning(struct sdhci_host *host); 794 void sdhci_send_tuning(struct sdhci_host *host, u32 opcode); 795 void sdhci_abort_tuning(struct sdhci_host *host, u32 opcode); 796 797 #endif /* __SDHCI_HW_H */ 798