1 /* 2 * linux/drivers/mmc/host/sdhci.h - Secure Digital Host Controller Interface driver 3 * 4 * Header file for Host Controller registers and I/O accessors. 5 * 6 * Copyright (C) 2005-2008 Pierre Ossman, All Rights Reserved. 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License as published by 10 * the Free Software Foundation; either version 2 of the License, or (at 11 * your option) any later version. 12 */ 13 #ifndef __SDHCI_HW_H 14 #define __SDHCI_HW_H 15 16 #include <linux/scatterlist.h> 17 #include <linux/compiler.h> 18 #include <linux/types.h> 19 #include <linux/io.h> 20 #include <linux/leds.h> 21 #include <linux/interrupt.h> 22 23 #include <linux/mmc/host.h> 24 25 /* 26 * Controller registers 27 */ 28 29 #define SDHCI_DMA_ADDRESS 0x00 30 #define SDHCI_ARGUMENT2 SDHCI_DMA_ADDRESS 31 32 #define SDHCI_BLOCK_SIZE 0x04 33 #define SDHCI_MAKE_BLKSZ(dma, blksz) (((dma & 0x7) << 12) | (blksz & 0xFFF)) 34 35 #define SDHCI_BLOCK_COUNT 0x06 36 37 #define SDHCI_ARGUMENT 0x08 38 39 #define SDHCI_TRANSFER_MODE 0x0C 40 #define SDHCI_TRNS_DMA 0x01 41 #define SDHCI_TRNS_BLK_CNT_EN 0x02 42 #define SDHCI_TRNS_AUTO_CMD12 0x04 43 #define SDHCI_TRNS_AUTO_CMD23 0x08 44 #define SDHCI_TRNS_READ 0x10 45 #define SDHCI_TRNS_MULTI 0x20 46 47 #define SDHCI_COMMAND 0x0E 48 #define SDHCI_CMD_RESP_MASK 0x03 49 #define SDHCI_CMD_CRC 0x08 50 #define SDHCI_CMD_INDEX 0x10 51 #define SDHCI_CMD_DATA 0x20 52 #define SDHCI_CMD_ABORTCMD 0xC0 53 54 #define SDHCI_CMD_RESP_NONE 0x00 55 #define SDHCI_CMD_RESP_LONG 0x01 56 #define SDHCI_CMD_RESP_SHORT 0x02 57 #define SDHCI_CMD_RESP_SHORT_BUSY 0x03 58 59 #define SDHCI_MAKE_CMD(c, f) (((c & 0xff) << 8) | (f & 0xff)) 60 #define SDHCI_GET_CMD(c) ((c>>8) & 0x3f) 61 62 #define SDHCI_RESPONSE 0x10 63 64 #define SDHCI_BUFFER 0x20 65 66 #define SDHCI_PRESENT_STATE 0x24 67 #define SDHCI_CMD_INHIBIT 0x00000001 68 #define SDHCI_DATA_INHIBIT 0x00000002 69 #define SDHCI_DOING_WRITE 0x00000100 70 #define SDHCI_DOING_READ 0x00000200 71 #define SDHCI_SPACE_AVAILABLE 0x00000400 72 #define SDHCI_DATA_AVAILABLE 0x00000800 73 #define SDHCI_CARD_PRESENT 0x00010000 74 #define SDHCI_WRITE_PROTECT 0x00080000 75 #define SDHCI_DATA_LVL_MASK 0x00F00000 76 #define SDHCI_DATA_LVL_SHIFT 20 77 #define SDHCI_DATA_0_LVL_MASK 0x00100000 78 #define SDHCI_CMD_LVL 0x01000000 79 80 #define SDHCI_HOST_CONTROL 0x28 81 #define SDHCI_CTRL_LED 0x01 82 #define SDHCI_CTRL_4BITBUS 0x02 83 #define SDHCI_CTRL_HISPD 0x04 84 #define SDHCI_CTRL_DMA_MASK 0x18 85 #define SDHCI_CTRL_SDMA 0x00 86 #define SDHCI_CTRL_ADMA1 0x08 87 #define SDHCI_CTRL_ADMA32 0x10 88 #define SDHCI_CTRL_ADMA64 0x18 89 #define SDHCI_CTRL_8BITBUS 0x20 90 #define SDHCI_CTRL_CDTEST_INS 0x40 91 #define SDHCI_CTRL_CDTEST_EN 0x80 92 93 #define SDHCI_POWER_CONTROL 0x29 94 #define SDHCI_POWER_ON 0x01 95 #define SDHCI_POWER_180 0x0A 96 #define SDHCI_POWER_300 0x0C 97 #define SDHCI_POWER_330 0x0E 98 99 #define SDHCI_BLOCK_GAP_CONTROL 0x2A 100 101 #define SDHCI_WAKE_UP_CONTROL 0x2B 102 #define SDHCI_WAKE_ON_INT 0x01 103 #define SDHCI_WAKE_ON_INSERT 0x02 104 #define SDHCI_WAKE_ON_REMOVE 0x04 105 106 #define SDHCI_CLOCK_CONTROL 0x2C 107 #define SDHCI_DIVIDER_SHIFT 8 108 #define SDHCI_DIVIDER_HI_SHIFT 6 109 #define SDHCI_DIV_MASK 0xFF 110 #define SDHCI_DIV_MASK_LEN 8 111 #define SDHCI_DIV_HI_MASK 0x300 112 #define SDHCI_PROG_CLOCK_MODE 0x0020 113 #define SDHCI_CLOCK_CARD_EN 0x0004 114 #define SDHCI_CLOCK_INT_STABLE 0x0002 115 #define SDHCI_CLOCK_INT_EN 0x0001 116 117 #define SDHCI_TIMEOUT_CONTROL 0x2E 118 119 #define SDHCI_SOFTWARE_RESET 0x2F 120 #define SDHCI_RESET_ALL 0x01 121 #define SDHCI_RESET_CMD 0x02 122 #define SDHCI_RESET_DATA 0x04 123 124 #define SDHCI_INT_STATUS 0x30 125 #define SDHCI_INT_ENABLE 0x34 126 #define SDHCI_SIGNAL_ENABLE 0x38 127 #define SDHCI_INT_RESPONSE 0x00000001 128 #define SDHCI_INT_DATA_END 0x00000002 129 #define SDHCI_INT_BLK_GAP 0x00000004 130 #define SDHCI_INT_DMA_END 0x00000008 131 #define SDHCI_INT_SPACE_AVAIL 0x00000010 132 #define SDHCI_INT_DATA_AVAIL 0x00000020 133 #define SDHCI_INT_CARD_INSERT 0x00000040 134 #define SDHCI_INT_CARD_REMOVE 0x00000080 135 #define SDHCI_INT_CARD_INT 0x00000100 136 #define SDHCI_INT_RETUNE 0x00001000 137 #define SDHCI_INT_CQE 0x00004000 138 #define SDHCI_INT_ERROR 0x00008000 139 #define SDHCI_INT_TIMEOUT 0x00010000 140 #define SDHCI_INT_CRC 0x00020000 141 #define SDHCI_INT_END_BIT 0x00040000 142 #define SDHCI_INT_INDEX 0x00080000 143 #define SDHCI_INT_DATA_TIMEOUT 0x00100000 144 #define SDHCI_INT_DATA_CRC 0x00200000 145 #define SDHCI_INT_DATA_END_BIT 0x00400000 146 #define SDHCI_INT_BUS_POWER 0x00800000 147 #define SDHCI_INT_ACMD12ERR 0x01000000 148 #define SDHCI_INT_ADMA_ERROR 0x02000000 149 150 #define SDHCI_INT_NORMAL_MASK 0x00007FFF 151 #define SDHCI_INT_ERROR_MASK 0xFFFF8000 152 153 #define SDHCI_INT_CMD_MASK (SDHCI_INT_RESPONSE | SDHCI_INT_TIMEOUT | \ 154 SDHCI_INT_CRC | SDHCI_INT_END_BIT | SDHCI_INT_INDEX) 155 #define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \ 156 SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \ 157 SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \ 158 SDHCI_INT_DATA_END_BIT | SDHCI_INT_ADMA_ERROR | \ 159 SDHCI_INT_BLK_GAP) 160 #define SDHCI_INT_ALL_MASK ((unsigned int)-1) 161 162 #define SDHCI_CQE_INT_ERR_MASK ( \ 163 SDHCI_INT_ADMA_ERROR | SDHCI_INT_BUS_POWER | SDHCI_INT_DATA_END_BIT | \ 164 SDHCI_INT_DATA_CRC | SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_INDEX | \ 165 SDHCI_INT_END_BIT | SDHCI_INT_CRC | SDHCI_INT_TIMEOUT) 166 167 #define SDHCI_CQE_INT_MASK (SDHCI_CQE_INT_ERR_MASK | SDHCI_INT_CQE) 168 169 #define SDHCI_ACMD12_ERR 0x3C 170 171 #define SDHCI_HOST_CONTROL2 0x3E 172 #define SDHCI_CTRL_UHS_MASK 0x0007 173 #define SDHCI_CTRL_UHS_SDR12 0x0000 174 #define SDHCI_CTRL_UHS_SDR25 0x0001 175 #define SDHCI_CTRL_UHS_SDR50 0x0002 176 #define SDHCI_CTRL_UHS_SDR104 0x0003 177 #define SDHCI_CTRL_UHS_DDR50 0x0004 178 #define SDHCI_CTRL_HS400 0x0005 /* Non-standard */ 179 #define SDHCI_CTRL_VDD_180 0x0008 180 #define SDHCI_CTRL_DRV_TYPE_MASK 0x0030 181 #define SDHCI_CTRL_DRV_TYPE_B 0x0000 182 #define SDHCI_CTRL_DRV_TYPE_A 0x0010 183 #define SDHCI_CTRL_DRV_TYPE_C 0x0020 184 #define SDHCI_CTRL_DRV_TYPE_D 0x0030 185 #define SDHCI_CTRL_EXEC_TUNING 0x0040 186 #define SDHCI_CTRL_TUNED_CLK 0x0080 187 #define SDHCI_CTRL_PRESET_VAL_ENABLE 0x8000 188 189 #define SDHCI_CAPABILITIES 0x40 190 #define SDHCI_TIMEOUT_CLK_MASK 0x0000003F 191 #define SDHCI_TIMEOUT_CLK_SHIFT 0 192 #define SDHCI_TIMEOUT_CLK_UNIT 0x00000080 193 #define SDHCI_CLOCK_BASE_MASK 0x00003F00 194 #define SDHCI_CLOCK_V3_BASE_MASK 0x0000FF00 195 #define SDHCI_CLOCK_BASE_SHIFT 8 196 #define SDHCI_MAX_BLOCK_MASK 0x00030000 197 #define SDHCI_MAX_BLOCK_SHIFT 16 198 #define SDHCI_CAN_DO_8BIT 0x00040000 199 #define SDHCI_CAN_DO_ADMA2 0x00080000 200 #define SDHCI_CAN_DO_ADMA1 0x00100000 201 #define SDHCI_CAN_DO_HISPD 0x00200000 202 #define SDHCI_CAN_DO_SDMA 0x00400000 203 #define SDHCI_CAN_DO_SUSPEND 0x00800000 204 #define SDHCI_CAN_VDD_330 0x01000000 205 #define SDHCI_CAN_VDD_300 0x02000000 206 #define SDHCI_CAN_VDD_180 0x04000000 207 #define SDHCI_CAN_64BIT 0x10000000 208 209 #define SDHCI_SUPPORT_SDR50 0x00000001 210 #define SDHCI_SUPPORT_SDR104 0x00000002 211 #define SDHCI_SUPPORT_DDR50 0x00000004 212 #define SDHCI_DRIVER_TYPE_A 0x00000010 213 #define SDHCI_DRIVER_TYPE_C 0x00000020 214 #define SDHCI_DRIVER_TYPE_D 0x00000040 215 #define SDHCI_RETUNING_TIMER_COUNT_MASK 0x00000F00 216 #define SDHCI_RETUNING_TIMER_COUNT_SHIFT 8 217 #define SDHCI_USE_SDR50_TUNING 0x00002000 218 #define SDHCI_RETUNING_MODE_MASK 0x0000C000 219 #define SDHCI_RETUNING_MODE_SHIFT 14 220 #define SDHCI_CLOCK_MUL_MASK 0x00FF0000 221 #define SDHCI_CLOCK_MUL_SHIFT 16 222 #define SDHCI_SUPPORT_HS400 0x80000000 /* Non-standard */ 223 224 #define SDHCI_CAPABILITIES_1 0x44 225 226 #define SDHCI_MAX_CURRENT 0x48 227 #define SDHCI_MAX_CURRENT_LIMIT 0xFF 228 #define SDHCI_MAX_CURRENT_330_MASK 0x0000FF 229 #define SDHCI_MAX_CURRENT_330_SHIFT 0 230 #define SDHCI_MAX_CURRENT_300_MASK 0x00FF00 231 #define SDHCI_MAX_CURRENT_300_SHIFT 8 232 #define SDHCI_MAX_CURRENT_180_MASK 0xFF0000 233 #define SDHCI_MAX_CURRENT_180_SHIFT 16 234 #define SDHCI_MAX_CURRENT_MULTIPLIER 4 235 236 /* 4C-4F reserved for more max current */ 237 238 #define SDHCI_SET_ACMD12_ERROR 0x50 239 #define SDHCI_SET_INT_ERROR 0x52 240 241 #define SDHCI_ADMA_ERROR 0x54 242 243 /* 55-57 reserved */ 244 245 #define SDHCI_ADMA_ADDRESS 0x58 246 #define SDHCI_ADMA_ADDRESS_HI 0x5C 247 248 /* 60-FB reserved */ 249 250 #define SDHCI_PRESET_FOR_SDR12 0x66 251 #define SDHCI_PRESET_FOR_SDR25 0x68 252 #define SDHCI_PRESET_FOR_SDR50 0x6A 253 #define SDHCI_PRESET_FOR_SDR104 0x6C 254 #define SDHCI_PRESET_FOR_DDR50 0x6E 255 #define SDHCI_PRESET_FOR_HS400 0x74 /* Non-standard */ 256 #define SDHCI_PRESET_DRV_MASK 0xC000 257 #define SDHCI_PRESET_DRV_SHIFT 14 258 #define SDHCI_PRESET_CLKGEN_SEL_MASK 0x400 259 #define SDHCI_PRESET_CLKGEN_SEL_SHIFT 10 260 #define SDHCI_PRESET_SDCLK_FREQ_MASK 0x3FF 261 #define SDHCI_PRESET_SDCLK_FREQ_SHIFT 0 262 263 #define SDHCI_SLOT_INT_STATUS 0xFC 264 265 #define SDHCI_HOST_VERSION 0xFE 266 #define SDHCI_VENDOR_VER_MASK 0xFF00 267 #define SDHCI_VENDOR_VER_SHIFT 8 268 #define SDHCI_SPEC_VER_MASK 0x00FF 269 #define SDHCI_SPEC_VER_SHIFT 0 270 #define SDHCI_SPEC_100 0 271 #define SDHCI_SPEC_200 1 272 #define SDHCI_SPEC_300 2 273 274 /* 275 * End of controller registers. 276 */ 277 278 #define SDHCI_MAX_DIV_SPEC_200 256 279 #define SDHCI_MAX_DIV_SPEC_300 2046 280 281 /* 282 * Host SDMA buffer boundary. Valid values from 4K to 512K in powers of 2. 283 */ 284 #define SDHCI_DEFAULT_BOUNDARY_SIZE (512 * 1024) 285 #define SDHCI_DEFAULT_BOUNDARY_ARG (ilog2(SDHCI_DEFAULT_BOUNDARY_SIZE) - 12) 286 287 /* ADMA2 32-bit DMA descriptor size */ 288 #define SDHCI_ADMA2_32_DESC_SZ 8 289 290 /* ADMA2 32-bit descriptor */ 291 struct sdhci_adma2_32_desc { 292 __le16 cmd; 293 __le16 len; 294 __le32 addr; 295 } __packed __aligned(4); 296 297 /* ADMA2 data alignment */ 298 #define SDHCI_ADMA2_ALIGN 4 299 #define SDHCI_ADMA2_MASK (SDHCI_ADMA2_ALIGN - 1) 300 301 /* 302 * ADMA2 descriptor alignment. Some controllers (e.g. Intel) require 8 byte 303 * alignment for the descriptor table even in 32-bit DMA mode. Memory 304 * allocation is at least 8 byte aligned anyway, so just stipulate 8 always. 305 */ 306 #define SDHCI_ADMA2_DESC_ALIGN 8 307 308 /* ADMA2 64-bit DMA descriptor size */ 309 #define SDHCI_ADMA2_64_DESC_SZ 12 310 311 /* 312 * ADMA2 64-bit descriptor. Note 12-byte descriptor can't always be 8-byte 313 * aligned. 314 */ 315 struct sdhci_adma2_64_desc { 316 __le16 cmd; 317 __le16 len; 318 __le32 addr_lo; 319 __le32 addr_hi; 320 } __packed __aligned(4); 321 322 #define ADMA2_TRAN_VALID 0x21 323 #define ADMA2_NOP_END_VALID 0x3 324 #define ADMA2_END 0x2 325 326 /* 327 * Maximum segments assuming a 512KiB maximum requisition size and a minimum 328 * 4KiB page size. 329 */ 330 #define SDHCI_MAX_SEGS 128 331 332 /* Allow for a a command request and a data request at the same time */ 333 #define SDHCI_MAX_MRQS 2 334 335 enum sdhci_cookie { 336 COOKIE_UNMAPPED, 337 COOKIE_PRE_MAPPED, /* mapped by sdhci_pre_req() */ 338 COOKIE_MAPPED, /* mapped by sdhci_prepare_data() */ 339 }; 340 341 struct sdhci_host { 342 /* Data set by hardware interface driver */ 343 const char *hw_name; /* Hardware bus name */ 344 345 unsigned int quirks; /* Deviations from spec. */ 346 347 /* Controller doesn't honor resets unless we touch the clock register */ 348 #define SDHCI_QUIRK_CLOCK_BEFORE_RESET (1<<0) 349 /* Controller has bad caps bits, but really supports DMA */ 350 #define SDHCI_QUIRK_FORCE_DMA (1<<1) 351 /* Controller doesn't like to be reset when there is no card inserted. */ 352 #define SDHCI_QUIRK_NO_CARD_NO_RESET (1<<2) 353 /* Controller doesn't like clearing the power reg before a change */ 354 #define SDHCI_QUIRK_SINGLE_POWER_WRITE (1<<3) 355 /* Controller has flaky internal state so reset it on each ios change */ 356 #define SDHCI_QUIRK_RESET_CMD_DATA_ON_IOS (1<<4) 357 /* Controller has an unusable DMA engine */ 358 #define SDHCI_QUIRK_BROKEN_DMA (1<<5) 359 /* Controller has an unusable ADMA engine */ 360 #define SDHCI_QUIRK_BROKEN_ADMA (1<<6) 361 /* Controller can only DMA from 32-bit aligned addresses */ 362 #define SDHCI_QUIRK_32BIT_DMA_ADDR (1<<7) 363 /* Controller can only DMA chunk sizes that are a multiple of 32 bits */ 364 #define SDHCI_QUIRK_32BIT_DMA_SIZE (1<<8) 365 /* Controller can only ADMA chunks that are a multiple of 32 bits */ 366 #define SDHCI_QUIRK_32BIT_ADMA_SIZE (1<<9) 367 /* Controller needs to be reset after each request to stay stable */ 368 #define SDHCI_QUIRK_RESET_AFTER_REQUEST (1<<10) 369 /* Controller needs voltage and power writes to happen separately */ 370 #define SDHCI_QUIRK_NO_SIMULT_VDD_AND_POWER (1<<11) 371 /* Controller provides an incorrect timeout value for transfers */ 372 #define SDHCI_QUIRK_BROKEN_TIMEOUT_VAL (1<<12) 373 /* Controller has an issue with buffer bits for small transfers */ 374 #define SDHCI_QUIRK_BROKEN_SMALL_PIO (1<<13) 375 /* Controller does not provide transfer-complete interrupt when not busy */ 376 #define SDHCI_QUIRK_NO_BUSY_IRQ (1<<14) 377 /* Controller has unreliable card detection */ 378 #define SDHCI_QUIRK_BROKEN_CARD_DETECTION (1<<15) 379 /* Controller reports inverted write-protect state */ 380 #define SDHCI_QUIRK_INVERTED_WRITE_PROTECT (1<<16) 381 /* Controller does not like fast PIO transfers */ 382 #define SDHCI_QUIRK_PIO_NEEDS_DELAY (1<<18) 383 /* Controller has to be forced to use block size of 2048 bytes */ 384 #define SDHCI_QUIRK_FORCE_BLK_SZ_2048 (1<<20) 385 /* Controller cannot do multi-block transfers */ 386 #define SDHCI_QUIRK_NO_MULTIBLOCK (1<<21) 387 /* Controller can only handle 1-bit data transfers */ 388 #define SDHCI_QUIRK_FORCE_1_BIT_DATA (1<<22) 389 /* Controller needs 10ms delay between applying power and clock */ 390 #define SDHCI_QUIRK_DELAY_AFTER_POWER (1<<23) 391 /* Controller uses SDCLK instead of TMCLK for data timeouts */ 392 #define SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK (1<<24) 393 /* Controller reports wrong base clock capability */ 394 #define SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN (1<<25) 395 /* Controller cannot support End Attribute in NOP ADMA descriptor */ 396 #define SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC (1<<26) 397 /* Controller is missing device caps. Use caps provided by host */ 398 #define SDHCI_QUIRK_MISSING_CAPS (1<<27) 399 /* Controller uses Auto CMD12 command to stop the transfer */ 400 #define SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 (1<<28) 401 /* Controller doesn't have HISPD bit field in HI-SPEED SD card */ 402 #define SDHCI_QUIRK_NO_HISPD_BIT (1<<29) 403 /* Controller treats ADMA descriptors with length 0000h incorrectly */ 404 #define SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC (1<<30) 405 /* The read-only detection via SDHCI_PRESENT_STATE register is unstable */ 406 #define SDHCI_QUIRK_UNSTABLE_RO_DETECT (1<<31) 407 408 unsigned int quirks2; /* More deviations from spec. */ 409 410 #define SDHCI_QUIRK2_HOST_OFF_CARD_ON (1<<0) 411 #define SDHCI_QUIRK2_HOST_NO_CMD23 (1<<1) 412 /* The system physically doesn't support 1.8v, even if the host does */ 413 #define SDHCI_QUIRK2_NO_1_8_V (1<<2) 414 #define SDHCI_QUIRK2_PRESET_VALUE_BROKEN (1<<3) 415 #define SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON (1<<4) 416 /* Controller has a non-standard host control register */ 417 #define SDHCI_QUIRK2_BROKEN_HOST_CONTROL (1<<5) 418 /* Controller does not support HS200 */ 419 #define SDHCI_QUIRK2_BROKEN_HS200 (1<<6) 420 /* Controller does not support DDR50 */ 421 #define SDHCI_QUIRK2_BROKEN_DDR50 (1<<7) 422 /* Stop command (CMD12) can set Transfer Complete when not using MMC_RSP_BUSY */ 423 #define SDHCI_QUIRK2_STOP_WITH_TC (1<<8) 424 /* Controller does not support 64-bit DMA */ 425 #define SDHCI_QUIRK2_BROKEN_64_BIT_DMA (1<<9) 426 /* need clear transfer mode register before send cmd */ 427 #define SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD (1<<10) 428 /* Capability register bit-63 indicates HS400 support */ 429 #define SDHCI_QUIRK2_CAPS_BIT63_FOR_HS400 (1<<11) 430 /* forced tuned clock */ 431 #define SDHCI_QUIRK2_TUNING_WORK_AROUND (1<<12) 432 /* disable the block count for single block transactions */ 433 #define SDHCI_QUIRK2_SUPPORT_SINGLE (1<<13) 434 /* Controller broken with using ACMD23 */ 435 #define SDHCI_QUIRK2_ACMD23_BROKEN (1<<14) 436 /* Broken Clock divider zero in controller */ 437 #define SDHCI_QUIRK2_CLOCK_DIV_ZERO_BROKEN (1<<15) 438 /* Controller has CRC in 136 bit Command Response */ 439 #define SDHCI_QUIRK2_RSP_136_HAS_CRC (1<<16) 440 441 int irq; /* Device IRQ */ 442 void __iomem *ioaddr; /* Mapped address */ 443 char *bounce_buffer; /* For packing SDMA reads/writes */ 444 dma_addr_t bounce_addr; 445 unsigned int bounce_buffer_size; 446 447 const struct sdhci_ops *ops; /* Low level hw interface */ 448 449 /* Internal data */ 450 struct mmc_host *mmc; /* MMC structure */ 451 struct mmc_host_ops mmc_host_ops; /* MMC host ops */ 452 u64 dma_mask; /* custom DMA mask */ 453 454 #if IS_ENABLED(CONFIG_LEDS_CLASS) 455 struct led_classdev led; /* LED control */ 456 char led_name[32]; 457 #endif 458 459 spinlock_t lock; /* Mutex */ 460 461 int flags; /* Host attributes */ 462 #define SDHCI_USE_SDMA (1<<0) /* Host is SDMA capable */ 463 #define SDHCI_USE_ADMA (1<<1) /* Host is ADMA capable */ 464 #define SDHCI_REQ_USE_DMA (1<<2) /* Use DMA for this req. */ 465 #define SDHCI_DEVICE_DEAD (1<<3) /* Device unresponsive */ 466 #define SDHCI_SDR50_NEEDS_TUNING (1<<4) /* SDR50 needs tuning */ 467 #define SDHCI_AUTO_CMD12 (1<<6) /* Auto CMD12 support */ 468 #define SDHCI_AUTO_CMD23 (1<<7) /* Auto CMD23 support */ 469 #define SDHCI_PV_ENABLED (1<<8) /* Preset value enabled */ 470 #define SDHCI_SDIO_IRQ_ENABLED (1<<9) /* SDIO irq enabled */ 471 #define SDHCI_USE_64_BIT_DMA (1<<12) /* Use 64-bit DMA */ 472 #define SDHCI_HS400_TUNING (1<<13) /* Tuning for HS400 */ 473 #define SDHCI_SIGNALING_330 (1<<14) /* Host is capable of 3.3V signaling */ 474 #define SDHCI_SIGNALING_180 (1<<15) /* Host is capable of 1.8V signaling */ 475 #define SDHCI_SIGNALING_120 (1<<16) /* Host is capable of 1.2V signaling */ 476 477 unsigned int version; /* SDHCI spec. version */ 478 479 unsigned int max_clk; /* Max possible freq (MHz) */ 480 unsigned int timeout_clk; /* Timeout freq (KHz) */ 481 unsigned int clk_mul; /* Clock Muliplier value */ 482 483 unsigned int clock; /* Current clock (MHz) */ 484 u8 pwr; /* Current voltage */ 485 486 bool runtime_suspended; /* Host is runtime suspended */ 487 bool bus_on; /* Bus power prevents runtime suspend */ 488 bool preset_enabled; /* Preset is enabled */ 489 bool pending_reset; /* Cmd/data reset is pending */ 490 bool irq_wake_enabled; /* IRQ wakeup is enabled */ 491 492 struct mmc_request *mrqs_done[SDHCI_MAX_MRQS]; /* Requests done */ 493 struct mmc_command *cmd; /* Current command */ 494 struct mmc_command *data_cmd; /* Current data command */ 495 struct mmc_data *data; /* Current data request */ 496 unsigned int data_early:1; /* Data finished before cmd */ 497 498 struct sg_mapping_iter sg_miter; /* SG state for PIO */ 499 unsigned int blocks; /* remaining PIO blocks */ 500 501 int sg_count; /* Mapped sg entries */ 502 503 void *adma_table; /* ADMA descriptor table */ 504 void *align_buffer; /* Bounce buffer */ 505 506 size_t adma_table_sz; /* ADMA descriptor table size */ 507 size_t align_buffer_sz; /* Bounce buffer size */ 508 509 dma_addr_t adma_addr; /* Mapped ADMA descr. table */ 510 dma_addr_t align_addr; /* Mapped bounce buffer */ 511 512 unsigned int desc_sz; /* ADMA descriptor size */ 513 514 struct tasklet_struct finish_tasklet; /* Tasklet structures */ 515 516 struct timer_list timer; /* Timer for timeouts */ 517 struct timer_list data_timer; /* Timer for data timeouts */ 518 519 u32 caps; /* CAPABILITY_0 */ 520 u32 caps1; /* CAPABILITY_1 */ 521 bool read_caps; /* Capability flags have been read */ 522 523 unsigned int ocr_avail_sdio; /* OCR bit masks */ 524 unsigned int ocr_avail_sd; 525 unsigned int ocr_avail_mmc; 526 u32 ocr_mask; /* available voltages */ 527 528 unsigned timing; /* Current timing */ 529 530 u32 thread_isr; 531 532 /* cached registers */ 533 u32 ier; 534 535 bool cqe_on; /* CQE is operating */ 536 u32 cqe_ier; /* CQE interrupt mask */ 537 u32 cqe_err_ier; /* CQE error interrupt mask */ 538 539 wait_queue_head_t buf_ready_int; /* Waitqueue for Buffer Read Ready interrupt */ 540 unsigned int tuning_done; /* Condition flag set when CMD19 succeeds */ 541 542 unsigned int tuning_count; /* Timer count for re-tuning */ 543 unsigned int tuning_mode; /* Re-tuning mode supported by host */ 544 #define SDHCI_TUNING_MODE_1 0 545 #define SDHCI_TUNING_MODE_2 1 546 #define SDHCI_TUNING_MODE_3 2 547 /* Delay (ms) between tuning commands */ 548 int tuning_delay; 549 550 /* Host SDMA buffer boundary. */ 551 u32 sdma_boundary; 552 553 unsigned long private[0] ____cacheline_aligned; 554 }; 555 556 struct sdhci_ops { 557 #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS 558 u32 (*read_l)(struct sdhci_host *host, int reg); 559 u16 (*read_w)(struct sdhci_host *host, int reg); 560 u8 (*read_b)(struct sdhci_host *host, int reg); 561 void (*write_l)(struct sdhci_host *host, u32 val, int reg); 562 void (*write_w)(struct sdhci_host *host, u16 val, int reg); 563 void (*write_b)(struct sdhci_host *host, u8 val, int reg); 564 #endif 565 566 void (*set_clock)(struct sdhci_host *host, unsigned int clock); 567 void (*set_power)(struct sdhci_host *host, unsigned char mode, 568 unsigned short vdd); 569 570 u32 (*irq)(struct sdhci_host *host, u32 intmask); 571 572 int (*enable_dma)(struct sdhci_host *host); 573 unsigned int (*get_max_clock)(struct sdhci_host *host); 574 unsigned int (*get_min_clock)(struct sdhci_host *host); 575 /* get_timeout_clock should return clk rate in unit of Hz */ 576 unsigned int (*get_timeout_clock)(struct sdhci_host *host); 577 unsigned int (*get_max_timeout_count)(struct sdhci_host *host); 578 void (*set_timeout)(struct sdhci_host *host, 579 struct mmc_command *cmd); 580 void (*set_bus_width)(struct sdhci_host *host, int width); 581 void (*platform_send_init_74_clocks)(struct sdhci_host *host, 582 u8 power_mode); 583 unsigned int (*get_ro)(struct sdhci_host *host); 584 void (*reset)(struct sdhci_host *host, u8 mask); 585 int (*platform_execute_tuning)(struct sdhci_host *host, u32 opcode); 586 void (*set_uhs_signaling)(struct sdhci_host *host, unsigned int uhs); 587 void (*hw_reset)(struct sdhci_host *host); 588 void (*adma_workaround)(struct sdhci_host *host, u32 intmask); 589 void (*card_event)(struct sdhci_host *host); 590 void (*voltage_switch)(struct sdhci_host *host); 591 }; 592 593 #ifdef CONFIG_MMC_SDHCI_IO_ACCESSORS 594 595 static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg) 596 { 597 if (unlikely(host->ops->write_l)) 598 host->ops->write_l(host, val, reg); 599 else 600 writel(val, host->ioaddr + reg); 601 } 602 603 static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg) 604 { 605 if (unlikely(host->ops->write_w)) 606 host->ops->write_w(host, val, reg); 607 else 608 writew(val, host->ioaddr + reg); 609 } 610 611 static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg) 612 { 613 if (unlikely(host->ops->write_b)) 614 host->ops->write_b(host, val, reg); 615 else 616 writeb(val, host->ioaddr + reg); 617 } 618 619 static inline u32 sdhci_readl(struct sdhci_host *host, int reg) 620 { 621 if (unlikely(host->ops->read_l)) 622 return host->ops->read_l(host, reg); 623 else 624 return readl(host->ioaddr + reg); 625 } 626 627 static inline u16 sdhci_readw(struct sdhci_host *host, int reg) 628 { 629 if (unlikely(host->ops->read_w)) 630 return host->ops->read_w(host, reg); 631 else 632 return readw(host->ioaddr + reg); 633 } 634 635 static inline u8 sdhci_readb(struct sdhci_host *host, int reg) 636 { 637 if (unlikely(host->ops->read_b)) 638 return host->ops->read_b(host, reg); 639 else 640 return readb(host->ioaddr + reg); 641 } 642 643 #else 644 645 static inline void sdhci_writel(struct sdhci_host *host, u32 val, int reg) 646 { 647 writel(val, host->ioaddr + reg); 648 } 649 650 static inline void sdhci_writew(struct sdhci_host *host, u16 val, int reg) 651 { 652 writew(val, host->ioaddr + reg); 653 } 654 655 static inline void sdhci_writeb(struct sdhci_host *host, u8 val, int reg) 656 { 657 writeb(val, host->ioaddr + reg); 658 } 659 660 static inline u32 sdhci_readl(struct sdhci_host *host, int reg) 661 { 662 return readl(host->ioaddr + reg); 663 } 664 665 static inline u16 sdhci_readw(struct sdhci_host *host, int reg) 666 { 667 return readw(host->ioaddr + reg); 668 } 669 670 static inline u8 sdhci_readb(struct sdhci_host *host, int reg) 671 { 672 return readb(host->ioaddr + reg); 673 } 674 675 #endif /* CONFIG_MMC_SDHCI_IO_ACCESSORS */ 676 677 struct sdhci_host *sdhci_alloc_host(struct device *dev, size_t priv_size); 678 void sdhci_free_host(struct sdhci_host *host); 679 680 static inline void *sdhci_priv(struct sdhci_host *host) 681 { 682 return host->private; 683 } 684 685 void sdhci_card_detect(struct sdhci_host *host); 686 void __sdhci_read_caps(struct sdhci_host *host, u16 *ver, u32 *caps, 687 u32 *caps1); 688 int sdhci_setup_host(struct sdhci_host *host); 689 void sdhci_cleanup_host(struct sdhci_host *host); 690 int __sdhci_add_host(struct sdhci_host *host); 691 int sdhci_add_host(struct sdhci_host *host); 692 void sdhci_remove_host(struct sdhci_host *host, int dead); 693 void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd); 694 695 static inline void sdhci_read_caps(struct sdhci_host *host) 696 { 697 __sdhci_read_caps(host, NULL, NULL, NULL); 698 } 699 700 static inline bool sdhci_sdio_irq_enabled(struct sdhci_host *host) 701 { 702 return !!(host->flags & SDHCI_SDIO_IRQ_ENABLED); 703 } 704 705 u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock, 706 unsigned int *actual_clock); 707 void sdhci_set_clock(struct sdhci_host *host, unsigned int clock); 708 void sdhci_enable_clk(struct sdhci_host *host, u16 clk); 709 void sdhci_set_power(struct sdhci_host *host, unsigned char mode, 710 unsigned short vdd); 711 void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode, 712 unsigned short vdd); 713 void sdhci_set_bus_width(struct sdhci_host *host, int width); 714 void sdhci_reset(struct sdhci_host *host, u8 mask); 715 void sdhci_set_uhs_signaling(struct sdhci_host *host, unsigned timing); 716 int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode); 717 void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios); 718 int sdhci_start_signal_voltage_switch(struct mmc_host *mmc, 719 struct mmc_ios *ios); 720 void sdhci_enable_sdio_irq(struct mmc_host *mmc, int enable); 721 722 #ifdef CONFIG_PM 723 int sdhci_suspend_host(struct sdhci_host *host); 724 int sdhci_resume_host(struct sdhci_host *host); 725 int sdhci_runtime_suspend_host(struct sdhci_host *host); 726 int sdhci_runtime_resume_host(struct sdhci_host *host); 727 #endif 728 729 void sdhci_cqe_enable(struct mmc_host *mmc); 730 void sdhci_cqe_disable(struct mmc_host *mmc, bool recovery); 731 bool sdhci_cqe_irq(struct sdhci_host *host, u32 intmask, int *cmd_error, 732 int *data_error); 733 734 void sdhci_dumpregs(struct sdhci_host *host); 735 736 #endif /* __SDHCI_HW_H */ 737