1 /* 2 * Support for SDHCI on STMicroelectronics SoCs 3 * 4 * Copyright (C) 2014 STMicroelectronics Ltd 5 * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> 6 * Contributors: Peter Griffin <peter.griffin@linaro.org> 7 * 8 * Based on sdhci-cns3xxx.c 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License version 2 as 12 * published by the Free Software Foundation. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 */ 20 21 #include <linux/io.h> 22 #include <linux/of.h> 23 #include <linux/module.h> 24 #include <linux/err.h> 25 #include <linux/mmc/host.h> 26 #include <linux/reset.h> 27 #include "sdhci-pltfm.h" 28 29 struct st_mmc_platform_data { 30 struct reset_control *rstc; 31 void __iomem *top_ioaddr; 32 }; 33 34 /* MMCSS glue logic to setup the HC on some ST SoCs (e.g. STiH407 family) */ 35 36 #define ST_MMC_CCONFIG_REG_1 0x400 37 #define ST_MMC_CCONFIG_TIMEOUT_CLK_UNIT BIT(24) 38 #define ST_MMC_CCONFIG_TIMEOUT_CLK_FREQ BIT(12) 39 #define ST_MMC_CCONFIG_TUNING_COUNT_DEFAULT BIT(8) 40 #define ST_MMC_CCONFIG_ASYNC_WAKEUP BIT(0) 41 #define ST_MMC_CCONFIG_1_DEFAULT \ 42 ((ST_MMC_CCONFIG_TIMEOUT_CLK_UNIT) | \ 43 (ST_MMC_CCONFIG_TIMEOUT_CLK_FREQ) | \ 44 (ST_MMC_CCONFIG_TUNING_COUNT_DEFAULT)) 45 46 #define ST_MMC_CCONFIG_REG_2 0x404 47 #define ST_MMC_CCONFIG_HIGH_SPEED BIT(28) 48 #define ST_MMC_CCONFIG_ADMA2 BIT(24) 49 #define ST_MMC_CCONFIG_8BIT BIT(20) 50 #define ST_MMC_CCONFIG_MAX_BLK_LEN 16 51 #define MAX_BLK_LEN_1024 1 52 #define MAX_BLK_LEN_2048 2 53 #define BASE_CLK_FREQ_200 0xc8 54 #define BASE_CLK_FREQ_100 0x64 55 #define BASE_CLK_FREQ_50 0x32 56 #define ST_MMC_CCONFIG_2_DEFAULT \ 57 (ST_MMC_CCONFIG_HIGH_SPEED | ST_MMC_CCONFIG_ADMA2 | \ 58 ST_MMC_CCONFIG_8BIT | \ 59 (MAX_BLK_LEN_1024 << ST_MMC_CCONFIG_MAX_BLK_LEN)) 60 61 #define ST_MMC_CCONFIG_REG_3 0x408 62 #define ST_MMC_CCONFIG_EMMC_SLOT_TYPE BIT(28) 63 #define ST_MMC_CCONFIG_64BIT BIT(24) 64 #define ST_MMC_CCONFIG_ASYNCH_INTR_SUPPORT BIT(20) 65 #define ST_MMC_CCONFIG_1P8_VOLT BIT(16) 66 #define ST_MMC_CCONFIG_3P0_VOLT BIT(12) 67 #define ST_MMC_CCONFIG_3P3_VOLT BIT(8) 68 #define ST_MMC_CCONFIG_SUSP_RES_SUPPORT BIT(4) 69 #define ST_MMC_CCONFIG_SDMA BIT(0) 70 #define ST_MMC_CCONFIG_3_DEFAULT \ 71 (ST_MMC_CCONFIG_ASYNCH_INTR_SUPPORT | \ 72 ST_MMC_CCONFIG_3P3_VOLT | \ 73 ST_MMC_CCONFIG_SUSP_RES_SUPPORT | \ 74 ST_MMC_CCONFIG_SDMA) 75 76 #define ST_MMC_CCONFIG_REG_4 0x40c 77 #define ST_MMC_CCONFIG_D_DRIVER BIT(20) 78 #define ST_MMC_CCONFIG_C_DRIVER BIT(16) 79 #define ST_MMC_CCONFIG_A_DRIVER BIT(12) 80 #define ST_MMC_CCONFIG_DDR50 BIT(8) 81 #define ST_MMC_CCONFIG_SDR104 BIT(4) 82 #define ST_MMC_CCONFIG_SDR50 BIT(0) 83 #define ST_MMC_CCONFIG_4_DEFAULT 0 84 85 #define ST_MMC_CCONFIG_REG_5 0x410 86 #define ST_MMC_CCONFIG_TUNING_FOR_SDR50 BIT(8) 87 #define RETUNING_TIMER_CNT_MAX 0xf 88 #define ST_MMC_CCONFIG_5_DEFAULT 0 89 90 /* I/O configuration for Arasan IP */ 91 #define ST_MMC_GP_OUTPUT 0x450 92 #define ST_MMC_GP_OUTPUT_CD BIT(12) 93 94 #define ST_MMC_STATUS_R 0x460 95 96 #define ST_TOP_MMC_DLY_FIX_OFF(x) (x - 0x8) 97 98 /* TOP config registers to manage static and dynamic delay */ 99 #define ST_TOP_MMC_TX_CLK_DLY ST_TOP_MMC_DLY_FIX_OFF(0x8) 100 #define ST_TOP_MMC_RX_CLK_DLY ST_TOP_MMC_DLY_FIX_OFF(0xc) 101 /* MMC delay control register */ 102 #define ST_TOP_MMC_DLY_CTRL ST_TOP_MMC_DLY_FIX_OFF(0x18) 103 #define ST_TOP_MMC_DLY_CTRL_DLL_BYPASS_CMD BIT(0) 104 #define ST_TOP_MMC_DLY_CTRL_DLL_BYPASS_PH_SEL BIT(1) 105 #define ST_TOP_MMC_DLY_CTRL_TX_DLL_ENABLE BIT(8) 106 #define ST_TOP_MMC_DLY_CTRL_RX_DLL_ENABLE BIT(9) 107 #define ST_TOP_MMC_DLY_CTRL_ATUNE_NOT_CFG_DLY BIT(10) 108 #define ST_TOP_MMC_START_DLL_LOCK BIT(11) 109 110 /* register to provide the phase-shift value for DLL */ 111 #define ST_TOP_MMC_TX_DLL_STEP_DLY ST_TOP_MMC_DLY_FIX_OFF(0x1c) 112 #define ST_TOP_MMC_RX_DLL_STEP_DLY ST_TOP_MMC_DLY_FIX_OFF(0x20) 113 #define ST_TOP_MMC_RX_CMD_STEP_DLY ST_TOP_MMC_DLY_FIX_OFF(0x24) 114 115 /* phase shift delay on the tx clk 2.188ns */ 116 #define ST_TOP_MMC_TX_DLL_STEP_DLY_VALID 0x6 117 118 #define ST_TOP_MMC_DLY_MAX 0xf 119 120 #define ST_TOP_MMC_DYN_DLY_CONF \ 121 (ST_TOP_MMC_DLY_CTRL_TX_DLL_ENABLE | \ 122 ST_TOP_MMC_DLY_CTRL_ATUNE_NOT_CFG_DLY | \ 123 ST_TOP_MMC_START_DLL_LOCK) 124 125 /* 126 * For clock speeds greater than 90MHz, we need to check that the 127 * DLL procedure has finished before switching to ultra-speed modes. 128 */ 129 #define CLK_TO_CHECK_DLL_LOCK 90000000 130 131 static inline void st_mmcss_set_static_delay(void __iomem *ioaddr) 132 { 133 if (!ioaddr) 134 return; 135 136 writel_relaxed(0x0, ioaddr + ST_TOP_MMC_DLY_CTRL); 137 writel_relaxed(ST_TOP_MMC_DLY_MAX, 138 ioaddr + ST_TOP_MMC_TX_CLK_DLY); 139 } 140 141 /** 142 * st_mmcss_cconfig: configure the Arasan HC inside the flashSS. 143 * @np: dt device node. 144 * @host: sdhci host 145 * Description: this function is to configure the Arasan host controller. 146 * On some ST SoCs, i.e. STiH407 family, the MMC devices inside a dedicated 147 * flashSS sub-system which needs to be configured to be compliant to eMMC 4.5 148 * or eMMC4.3. This has to be done before registering the sdhci host. 149 */ 150 static void st_mmcss_cconfig(struct device_node *np, struct sdhci_host *host) 151 { 152 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 153 struct mmc_host *mhost = host->mmc; 154 u32 cconf2, cconf3, cconf4, cconf5; 155 156 if (!of_device_is_compatible(np, "st,sdhci-stih407")) 157 return; 158 159 cconf2 = ST_MMC_CCONFIG_2_DEFAULT; 160 cconf3 = ST_MMC_CCONFIG_3_DEFAULT; 161 cconf4 = ST_MMC_CCONFIG_4_DEFAULT; 162 cconf5 = ST_MMC_CCONFIG_5_DEFAULT; 163 164 writel_relaxed(ST_MMC_CCONFIG_1_DEFAULT, 165 host->ioaddr + ST_MMC_CCONFIG_REG_1); 166 167 /* Set clock frequency, default to 50MHz if max-frequency is not 168 * provided */ 169 170 switch (mhost->f_max) { 171 case 200000000: 172 clk_set_rate(pltfm_host->clk, mhost->f_max); 173 cconf2 |= BASE_CLK_FREQ_200; 174 break; 175 case 100000000: 176 clk_set_rate(pltfm_host->clk, mhost->f_max); 177 cconf2 |= BASE_CLK_FREQ_100; 178 break; 179 default: 180 clk_set_rate(pltfm_host->clk, 50000000); 181 cconf2 |= BASE_CLK_FREQ_50; 182 } 183 184 writel_relaxed(cconf2, host->ioaddr + ST_MMC_CCONFIG_REG_2); 185 186 if (mhost->caps & MMC_CAP_NONREMOVABLE) 187 cconf3 |= ST_MMC_CCONFIG_EMMC_SLOT_TYPE; 188 else 189 /* CARD _D ET_CTRL */ 190 writel_relaxed(ST_MMC_GP_OUTPUT_CD, 191 host->ioaddr + ST_MMC_GP_OUTPUT); 192 193 if (mhost->caps & MMC_CAP_UHS_SDR50) { 194 /* use 1.8V */ 195 cconf3 |= ST_MMC_CCONFIG_1P8_VOLT; 196 cconf4 |= ST_MMC_CCONFIG_SDR50; 197 /* Use tuning */ 198 cconf5 |= ST_MMC_CCONFIG_TUNING_FOR_SDR50; 199 /* Max timeout for retuning */ 200 cconf5 |= RETUNING_TIMER_CNT_MAX; 201 } 202 203 if (mhost->caps & MMC_CAP_UHS_SDR104) { 204 /* 205 * SDR104 implies the HC can support HS200 mode, so 206 * it's mandatory to use 1.8V 207 */ 208 cconf3 |= ST_MMC_CCONFIG_1P8_VOLT; 209 cconf4 |= ST_MMC_CCONFIG_SDR104; 210 /* Max timeout for retuning */ 211 cconf5 |= RETUNING_TIMER_CNT_MAX; 212 } 213 214 if (mhost->caps & MMC_CAP_UHS_DDR50) 215 cconf4 |= ST_MMC_CCONFIG_DDR50; 216 217 writel_relaxed(cconf3, host->ioaddr + ST_MMC_CCONFIG_REG_3); 218 writel_relaxed(cconf4, host->ioaddr + ST_MMC_CCONFIG_REG_4); 219 writel_relaxed(cconf5, host->ioaddr + ST_MMC_CCONFIG_REG_5); 220 } 221 222 static inline void st_mmcss_set_dll(void __iomem *ioaddr) 223 { 224 if (!ioaddr) 225 return; 226 227 writel_relaxed(ST_TOP_MMC_DYN_DLY_CONF, ioaddr + ST_TOP_MMC_DLY_CTRL); 228 writel_relaxed(ST_TOP_MMC_TX_DLL_STEP_DLY_VALID, 229 ioaddr + ST_TOP_MMC_TX_DLL_STEP_DLY); 230 } 231 232 static int st_mmcss_lock_dll(void __iomem *ioaddr) 233 { 234 unsigned long curr, value; 235 unsigned long finish = jiffies + HZ; 236 237 /* Checks if the DLL procedure is finished */ 238 do { 239 curr = jiffies; 240 value = readl(ioaddr + ST_MMC_STATUS_R); 241 if (value & 0x1) 242 return 0; 243 244 cpu_relax(); 245 } while (!time_after_eq(curr, finish)); 246 247 return -EBUSY; 248 } 249 250 static int sdhci_st_set_dll_for_clock(struct sdhci_host *host) 251 { 252 int ret = 0; 253 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 254 struct st_mmc_platform_data *pdata = pltfm_host->priv; 255 256 if (host->clock > CLK_TO_CHECK_DLL_LOCK) { 257 st_mmcss_set_dll(pdata->top_ioaddr); 258 ret = st_mmcss_lock_dll(host->ioaddr); 259 } 260 261 return ret; 262 } 263 264 static void sdhci_st_set_uhs_signaling(struct sdhci_host *host, 265 unsigned int uhs) 266 { 267 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 268 struct st_mmc_platform_data *pdata = pltfm_host->priv; 269 u16 ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); 270 int ret = 0; 271 272 /* Select Bus Speed Mode for host */ 273 ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; 274 switch (uhs) { 275 /* 276 * Set V18_EN -- UHS modes do not work without this. 277 * does not change signaling voltage 278 */ 279 280 case MMC_TIMING_UHS_SDR12: 281 st_mmcss_set_static_delay(pdata->top_ioaddr); 282 ctrl_2 |= SDHCI_CTRL_UHS_SDR12 | SDHCI_CTRL_VDD_180; 283 break; 284 case MMC_TIMING_UHS_SDR25: 285 st_mmcss_set_static_delay(pdata->top_ioaddr); 286 ctrl_2 |= SDHCI_CTRL_UHS_SDR25 | SDHCI_CTRL_VDD_180; 287 break; 288 case MMC_TIMING_UHS_SDR50: 289 st_mmcss_set_static_delay(pdata->top_ioaddr); 290 ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180; 291 ret = sdhci_st_set_dll_for_clock(host); 292 break; 293 case MMC_TIMING_UHS_SDR104: 294 case MMC_TIMING_MMC_HS200: 295 st_mmcss_set_static_delay(pdata->top_ioaddr); 296 ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180; 297 ret = sdhci_st_set_dll_for_clock(host); 298 break; 299 case MMC_TIMING_UHS_DDR50: 300 case MMC_TIMING_MMC_DDR52: 301 st_mmcss_set_static_delay(pdata->top_ioaddr); 302 ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180; 303 break; 304 } 305 306 if (ret) 307 dev_warn(mmc_dev(host->mmc), "Error setting dll for clock " 308 "(uhs %d)\n", uhs); 309 310 dev_dbg(mmc_dev(host->mmc), "uhs %d, ctrl_2 %04X\n", uhs, ctrl_2); 311 312 sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); 313 } 314 315 static u32 sdhci_st_readl(struct sdhci_host *host, int reg) 316 { 317 u32 ret; 318 319 switch (reg) { 320 case SDHCI_CAPABILITIES: 321 ret = readl_relaxed(host->ioaddr + reg); 322 /* Support 3.3V and 1.8V */ 323 ret &= ~SDHCI_CAN_VDD_300; 324 break; 325 default: 326 ret = readl_relaxed(host->ioaddr + reg); 327 } 328 return ret; 329 } 330 331 static const struct sdhci_ops sdhci_st_ops = { 332 .get_max_clock = sdhci_pltfm_clk_get_max_clock, 333 .set_clock = sdhci_set_clock, 334 .set_bus_width = sdhci_set_bus_width, 335 .read_l = sdhci_st_readl, 336 .reset = sdhci_reset, 337 .set_uhs_signaling = sdhci_st_set_uhs_signaling, 338 }; 339 340 static const struct sdhci_pltfm_data sdhci_st_pdata = { 341 .ops = &sdhci_st_ops, 342 .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC | 343 SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | 344 SDHCI_QUIRK_NO_HISPD_BIT, 345 .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | 346 SDHCI_QUIRK2_STOP_WITH_TC, 347 }; 348 349 350 static int sdhci_st_probe(struct platform_device *pdev) 351 { 352 struct device_node *np = pdev->dev.of_node; 353 struct sdhci_host *host; 354 struct st_mmc_platform_data *pdata; 355 struct sdhci_pltfm_host *pltfm_host; 356 struct clk *clk; 357 int ret = 0; 358 u16 host_version; 359 struct resource *res; 360 361 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); 362 if (!pdata) 363 return -ENOMEM; 364 365 clk = devm_clk_get(&pdev->dev, "mmc"); 366 if (IS_ERR(clk)) { 367 dev_err(&pdev->dev, "Peripheral clk not found\n"); 368 return PTR_ERR(clk); 369 } 370 371 pdata->rstc = devm_reset_control_get(&pdev->dev, NULL); 372 if (IS_ERR(pdata->rstc)) 373 pdata->rstc = NULL; 374 else 375 reset_control_deassert(pdata->rstc); 376 377 host = sdhci_pltfm_init(pdev, &sdhci_st_pdata, 0); 378 if (IS_ERR(host)) { 379 dev_err(&pdev->dev, "Failed sdhci_pltfm_init\n"); 380 ret = PTR_ERR(host); 381 goto err_pltfm_init; 382 } 383 384 ret = mmc_of_parse(host->mmc); 385 if (ret) { 386 dev_err(&pdev->dev, "Failed mmc_of_parse\n"); 387 goto err_of; 388 } 389 390 clk_prepare_enable(clk); 391 392 /* Configure the FlashSS Top registers for setting eMMC TX/RX delay */ 393 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, 394 "top-mmc-delay"); 395 pdata->top_ioaddr = devm_ioremap_resource(&pdev->dev, res); 396 if (IS_ERR(pdata->top_ioaddr)) { 397 dev_warn(&pdev->dev, "FlashSS Top Dly registers not available"); 398 pdata->top_ioaddr = NULL; 399 } 400 401 pltfm_host = sdhci_priv(host); 402 pltfm_host->priv = pdata; 403 pltfm_host->clk = clk; 404 405 /* Configure the Arasan HC inside the flashSS */ 406 st_mmcss_cconfig(np, host); 407 408 ret = sdhci_add_host(host); 409 if (ret) { 410 dev_err(&pdev->dev, "Failed sdhci_add_host\n"); 411 goto err_out; 412 } 413 414 platform_set_drvdata(pdev, host); 415 416 host_version = readw_relaxed((host->ioaddr + SDHCI_HOST_VERSION)); 417 418 dev_info(&pdev->dev, "SDHCI ST Initialised: Host Version: 0x%x Vendor Version 0x%x\n", 419 ((host_version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT), 420 ((host_version & SDHCI_VENDOR_VER_MASK) >> 421 SDHCI_VENDOR_VER_SHIFT)); 422 423 return 0; 424 425 err_out: 426 clk_disable_unprepare(clk); 427 err_of: 428 sdhci_pltfm_free(pdev); 429 err_pltfm_init: 430 if (pdata->rstc) 431 reset_control_assert(pdata->rstc); 432 433 return ret; 434 } 435 436 static int sdhci_st_remove(struct platform_device *pdev) 437 { 438 struct sdhci_host *host = platform_get_drvdata(pdev); 439 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 440 struct st_mmc_platform_data *pdata = pltfm_host->priv; 441 int ret; 442 443 ret = sdhci_pltfm_unregister(pdev); 444 445 if (pdata->rstc) 446 reset_control_assert(pdata->rstc); 447 448 return ret; 449 } 450 451 #ifdef CONFIG_PM_SLEEP 452 static int sdhci_st_suspend(struct device *dev) 453 { 454 struct sdhci_host *host = dev_get_drvdata(dev); 455 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 456 struct st_mmc_platform_data *pdata = pltfm_host->priv; 457 int ret = sdhci_suspend_host(host); 458 459 if (ret) 460 goto out; 461 462 if (pdata->rstc) 463 reset_control_assert(pdata->rstc); 464 465 clk_disable_unprepare(pltfm_host->clk); 466 out: 467 return ret; 468 } 469 470 static int sdhci_st_resume(struct device *dev) 471 { 472 struct sdhci_host *host = dev_get_drvdata(dev); 473 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 474 struct st_mmc_platform_data *pdata = pltfm_host->priv; 475 struct device_node *np = dev->of_node; 476 477 clk_prepare_enable(pltfm_host->clk); 478 479 if (pdata->rstc) 480 reset_control_deassert(pdata->rstc); 481 482 st_mmcss_cconfig(np, host); 483 484 return sdhci_resume_host(host); 485 } 486 #endif 487 488 static SIMPLE_DEV_PM_OPS(sdhci_st_pmops, sdhci_st_suspend, sdhci_st_resume); 489 490 static const struct of_device_id st_sdhci_match[] = { 491 { .compatible = "st,sdhci" }, 492 {}, 493 }; 494 495 MODULE_DEVICE_TABLE(of, st_sdhci_match); 496 497 static struct platform_driver sdhci_st_driver = { 498 .probe = sdhci_st_probe, 499 .remove = sdhci_st_remove, 500 .driver = { 501 .name = "sdhci-st", 502 .pm = &sdhci_st_pmops, 503 .of_match_table = of_match_ptr(st_sdhci_match), 504 }, 505 }; 506 507 module_platform_driver(sdhci_st_driver); 508 509 MODULE_DESCRIPTION("SDHCI driver for STMicroelectronics SoCs"); 510 MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>"); 511 MODULE_LICENSE("GPL v2"); 512 MODULE_ALIAS("platform:sdhci-st"); 513