1 /* 2 * Support for SDHCI on STMicroelectronics SoCs 3 * 4 * Copyright (C) 2014 STMicroelectronics Ltd 5 * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com> 6 * Contributors: Peter Griffin <peter.griffin@linaro.org> 7 * 8 * Based on sdhci-cns3xxx.c 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License version 2 as 12 * published by the Free Software Foundation. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 */ 20 21 #include <linux/io.h> 22 #include <linux/of.h> 23 #include <linux/module.h> 24 #include <linux/err.h> 25 #include <linux/mmc/host.h> 26 #include <linux/reset.h> 27 #include "sdhci-pltfm.h" 28 29 struct st_mmc_platform_data { 30 struct reset_control *rstc; 31 struct clk *icnclk; 32 void __iomem *top_ioaddr; 33 }; 34 35 /* MMCSS glue logic to setup the HC on some ST SoCs (e.g. STiH407 family) */ 36 37 #define ST_MMC_CCONFIG_REG_1 0x400 38 #define ST_MMC_CCONFIG_TIMEOUT_CLK_UNIT BIT(24) 39 #define ST_MMC_CCONFIG_TIMEOUT_CLK_FREQ BIT(12) 40 #define ST_MMC_CCONFIG_TUNING_COUNT_DEFAULT BIT(8) 41 #define ST_MMC_CCONFIG_ASYNC_WAKEUP BIT(0) 42 #define ST_MMC_CCONFIG_1_DEFAULT \ 43 ((ST_MMC_CCONFIG_TIMEOUT_CLK_UNIT) | \ 44 (ST_MMC_CCONFIG_TIMEOUT_CLK_FREQ) | \ 45 (ST_MMC_CCONFIG_TUNING_COUNT_DEFAULT)) 46 47 #define ST_MMC_CCONFIG_REG_2 0x404 48 #define ST_MMC_CCONFIG_HIGH_SPEED BIT(28) 49 #define ST_MMC_CCONFIG_ADMA2 BIT(24) 50 #define ST_MMC_CCONFIG_8BIT BIT(20) 51 #define ST_MMC_CCONFIG_MAX_BLK_LEN 16 52 #define MAX_BLK_LEN_1024 1 53 #define MAX_BLK_LEN_2048 2 54 #define BASE_CLK_FREQ_200 0xc8 55 #define BASE_CLK_FREQ_100 0x64 56 #define BASE_CLK_FREQ_50 0x32 57 #define ST_MMC_CCONFIG_2_DEFAULT \ 58 (ST_MMC_CCONFIG_HIGH_SPEED | ST_MMC_CCONFIG_ADMA2 | \ 59 ST_MMC_CCONFIG_8BIT | \ 60 (MAX_BLK_LEN_1024 << ST_MMC_CCONFIG_MAX_BLK_LEN)) 61 62 #define ST_MMC_CCONFIG_REG_3 0x408 63 #define ST_MMC_CCONFIG_EMMC_SLOT_TYPE BIT(28) 64 #define ST_MMC_CCONFIG_64BIT BIT(24) 65 #define ST_MMC_CCONFIG_ASYNCH_INTR_SUPPORT BIT(20) 66 #define ST_MMC_CCONFIG_1P8_VOLT BIT(16) 67 #define ST_MMC_CCONFIG_3P0_VOLT BIT(12) 68 #define ST_MMC_CCONFIG_3P3_VOLT BIT(8) 69 #define ST_MMC_CCONFIG_SUSP_RES_SUPPORT BIT(4) 70 #define ST_MMC_CCONFIG_SDMA BIT(0) 71 #define ST_MMC_CCONFIG_3_DEFAULT \ 72 (ST_MMC_CCONFIG_ASYNCH_INTR_SUPPORT | \ 73 ST_MMC_CCONFIG_3P3_VOLT | \ 74 ST_MMC_CCONFIG_SUSP_RES_SUPPORT | \ 75 ST_MMC_CCONFIG_SDMA) 76 77 #define ST_MMC_CCONFIG_REG_4 0x40c 78 #define ST_MMC_CCONFIG_D_DRIVER BIT(20) 79 #define ST_MMC_CCONFIG_C_DRIVER BIT(16) 80 #define ST_MMC_CCONFIG_A_DRIVER BIT(12) 81 #define ST_MMC_CCONFIG_DDR50 BIT(8) 82 #define ST_MMC_CCONFIG_SDR104 BIT(4) 83 #define ST_MMC_CCONFIG_SDR50 BIT(0) 84 #define ST_MMC_CCONFIG_4_DEFAULT 0 85 86 #define ST_MMC_CCONFIG_REG_5 0x410 87 #define ST_MMC_CCONFIG_TUNING_FOR_SDR50 BIT(8) 88 #define RETUNING_TIMER_CNT_MAX 0xf 89 #define ST_MMC_CCONFIG_5_DEFAULT 0 90 91 /* I/O configuration for Arasan IP */ 92 #define ST_MMC_GP_OUTPUT 0x450 93 #define ST_MMC_GP_OUTPUT_CD BIT(12) 94 95 #define ST_MMC_STATUS_R 0x460 96 97 #define ST_TOP_MMC_DLY_FIX_OFF(x) (x - 0x8) 98 99 /* TOP config registers to manage static and dynamic delay */ 100 #define ST_TOP_MMC_TX_CLK_DLY ST_TOP_MMC_DLY_FIX_OFF(0x8) 101 #define ST_TOP_MMC_RX_CLK_DLY ST_TOP_MMC_DLY_FIX_OFF(0xc) 102 /* MMC delay control register */ 103 #define ST_TOP_MMC_DLY_CTRL ST_TOP_MMC_DLY_FIX_OFF(0x18) 104 #define ST_TOP_MMC_DLY_CTRL_DLL_BYPASS_CMD BIT(0) 105 #define ST_TOP_MMC_DLY_CTRL_DLL_BYPASS_PH_SEL BIT(1) 106 #define ST_TOP_MMC_DLY_CTRL_TX_DLL_ENABLE BIT(8) 107 #define ST_TOP_MMC_DLY_CTRL_RX_DLL_ENABLE BIT(9) 108 #define ST_TOP_MMC_DLY_CTRL_ATUNE_NOT_CFG_DLY BIT(10) 109 #define ST_TOP_MMC_START_DLL_LOCK BIT(11) 110 111 /* register to provide the phase-shift value for DLL */ 112 #define ST_TOP_MMC_TX_DLL_STEP_DLY ST_TOP_MMC_DLY_FIX_OFF(0x1c) 113 #define ST_TOP_MMC_RX_DLL_STEP_DLY ST_TOP_MMC_DLY_FIX_OFF(0x20) 114 #define ST_TOP_MMC_RX_CMD_STEP_DLY ST_TOP_MMC_DLY_FIX_OFF(0x24) 115 116 /* phase shift delay on the tx clk 2.188ns */ 117 #define ST_TOP_MMC_TX_DLL_STEP_DLY_VALID 0x6 118 119 #define ST_TOP_MMC_DLY_MAX 0xf 120 121 #define ST_TOP_MMC_DYN_DLY_CONF \ 122 (ST_TOP_MMC_DLY_CTRL_TX_DLL_ENABLE | \ 123 ST_TOP_MMC_DLY_CTRL_ATUNE_NOT_CFG_DLY | \ 124 ST_TOP_MMC_START_DLL_LOCK) 125 126 /* 127 * For clock speeds greater than 90MHz, we need to check that the 128 * DLL procedure has finished before switching to ultra-speed modes. 129 */ 130 #define CLK_TO_CHECK_DLL_LOCK 90000000 131 132 static inline void st_mmcss_set_static_delay(void __iomem *ioaddr) 133 { 134 if (!ioaddr) 135 return; 136 137 writel_relaxed(0x0, ioaddr + ST_TOP_MMC_DLY_CTRL); 138 writel_relaxed(ST_TOP_MMC_DLY_MAX, 139 ioaddr + ST_TOP_MMC_TX_CLK_DLY); 140 } 141 142 /** 143 * st_mmcss_cconfig: configure the Arasan HC inside the flashSS. 144 * @np: dt device node. 145 * @host: sdhci host 146 * Description: this function is to configure the Arasan host controller. 147 * On some ST SoCs, i.e. STiH407 family, the MMC devices inside a dedicated 148 * flashSS sub-system which needs to be configured to be compliant to eMMC 4.5 149 * or eMMC4.3. This has to be done before registering the sdhci host. 150 */ 151 static void st_mmcss_cconfig(struct device_node *np, struct sdhci_host *host) 152 { 153 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 154 struct mmc_host *mhost = host->mmc; 155 u32 cconf2, cconf3, cconf4, cconf5; 156 157 if (!of_device_is_compatible(np, "st,sdhci-stih407")) 158 return; 159 160 cconf2 = ST_MMC_CCONFIG_2_DEFAULT; 161 cconf3 = ST_MMC_CCONFIG_3_DEFAULT; 162 cconf4 = ST_MMC_CCONFIG_4_DEFAULT; 163 cconf5 = ST_MMC_CCONFIG_5_DEFAULT; 164 165 writel_relaxed(ST_MMC_CCONFIG_1_DEFAULT, 166 host->ioaddr + ST_MMC_CCONFIG_REG_1); 167 168 /* Set clock frequency, default to 50MHz if max-frequency is not 169 * provided */ 170 171 switch (mhost->f_max) { 172 case 200000000: 173 clk_set_rate(pltfm_host->clk, mhost->f_max); 174 cconf2 |= BASE_CLK_FREQ_200; 175 break; 176 case 100000000: 177 clk_set_rate(pltfm_host->clk, mhost->f_max); 178 cconf2 |= BASE_CLK_FREQ_100; 179 break; 180 default: 181 clk_set_rate(pltfm_host->clk, 50000000); 182 cconf2 |= BASE_CLK_FREQ_50; 183 } 184 185 writel_relaxed(cconf2, host->ioaddr + ST_MMC_CCONFIG_REG_2); 186 187 if (!mmc_card_is_removable(mhost)) 188 cconf3 |= ST_MMC_CCONFIG_EMMC_SLOT_TYPE; 189 else 190 /* CARD _D ET_CTRL */ 191 writel_relaxed(ST_MMC_GP_OUTPUT_CD, 192 host->ioaddr + ST_MMC_GP_OUTPUT); 193 194 if (mhost->caps & MMC_CAP_UHS_SDR50) { 195 /* use 1.8V */ 196 cconf3 |= ST_MMC_CCONFIG_1P8_VOLT; 197 cconf4 |= ST_MMC_CCONFIG_SDR50; 198 /* Use tuning */ 199 cconf5 |= ST_MMC_CCONFIG_TUNING_FOR_SDR50; 200 /* Max timeout for retuning */ 201 cconf5 |= RETUNING_TIMER_CNT_MAX; 202 } 203 204 if (mhost->caps & MMC_CAP_UHS_SDR104) { 205 /* 206 * SDR104 implies the HC can support HS200 mode, so 207 * it's mandatory to use 1.8V 208 */ 209 cconf3 |= ST_MMC_CCONFIG_1P8_VOLT; 210 cconf4 |= ST_MMC_CCONFIG_SDR104; 211 /* Max timeout for retuning */ 212 cconf5 |= RETUNING_TIMER_CNT_MAX; 213 } 214 215 if (mhost->caps & MMC_CAP_UHS_DDR50) 216 cconf4 |= ST_MMC_CCONFIG_DDR50; 217 218 writel_relaxed(cconf3, host->ioaddr + ST_MMC_CCONFIG_REG_3); 219 writel_relaxed(cconf4, host->ioaddr + ST_MMC_CCONFIG_REG_4); 220 writel_relaxed(cconf5, host->ioaddr + ST_MMC_CCONFIG_REG_5); 221 } 222 223 static inline void st_mmcss_set_dll(void __iomem *ioaddr) 224 { 225 if (!ioaddr) 226 return; 227 228 writel_relaxed(ST_TOP_MMC_DYN_DLY_CONF, ioaddr + ST_TOP_MMC_DLY_CTRL); 229 writel_relaxed(ST_TOP_MMC_TX_DLL_STEP_DLY_VALID, 230 ioaddr + ST_TOP_MMC_TX_DLL_STEP_DLY); 231 } 232 233 static int st_mmcss_lock_dll(void __iomem *ioaddr) 234 { 235 unsigned long curr, value; 236 unsigned long finish = jiffies + HZ; 237 238 /* Checks if the DLL procedure is finished */ 239 do { 240 curr = jiffies; 241 value = readl(ioaddr + ST_MMC_STATUS_R); 242 if (value & 0x1) 243 return 0; 244 245 cpu_relax(); 246 } while (!time_after_eq(curr, finish)); 247 248 return -EBUSY; 249 } 250 251 static int sdhci_st_set_dll_for_clock(struct sdhci_host *host) 252 { 253 int ret = 0; 254 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 255 struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host); 256 257 if (host->clock > CLK_TO_CHECK_DLL_LOCK) { 258 st_mmcss_set_dll(pdata->top_ioaddr); 259 ret = st_mmcss_lock_dll(host->ioaddr); 260 } 261 262 return ret; 263 } 264 265 static void sdhci_st_set_uhs_signaling(struct sdhci_host *host, 266 unsigned int uhs) 267 { 268 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 269 struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host); 270 u16 ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); 271 int ret = 0; 272 273 /* Select Bus Speed Mode for host */ 274 ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; 275 switch (uhs) { 276 /* 277 * Set V18_EN -- UHS modes do not work without this. 278 * does not change signaling voltage 279 */ 280 281 case MMC_TIMING_UHS_SDR12: 282 st_mmcss_set_static_delay(pdata->top_ioaddr); 283 ctrl_2 |= SDHCI_CTRL_UHS_SDR12 | SDHCI_CTRL_VDD_180; 284 break; 285 case MMC_TIMING_UHS_SDR25: 286 st_mmcss_set_static_delay(pdata->top_ioaddr); 287 ctrl_2 |= SDHCI_CTRL_UHS_SDR25 | SDHCI_CTRL_VDD_180; 288 break; 289 case MMC_TIMING_UHS_SDR50: 290 st_mmcss_set_static_delay(pdata->top_ioaddr); 291 ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180; 292 ret = sdhci_st_set_dll_for_clock(host); 293 break; 294 case MMC_TIMING_UHS_SDR104: 295 case MMC_TIMING_MMC_HS200: 296 st_mmcss_set_static_delay(pdata->top_ioaddr); 297 ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180; 298 ret = sdhci_st_set_dll_for_clock(host); 299 break; 300 case MMC_TIMING_UHS_DDR50: 301 case MMC_TIMING_MMC_DDR52: 302 st_mmcss_set_static_delay(pdata->top_ioaddr); 303 ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180; 304 break; 305 } 306 307 if (ret) 308 dev_warn(mmc_dev(host->mmc), "Error setting dll for clock " 309 "(uhs %d)\n", uhs); 310 311 dev_dbg(mmc_dev(host->mmc), "uhs %d, ctrl_2 %04X\n", uhs, ctrl_2); 312 313 sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); 314 } 315 316 static u32 sdhci_st_readl(struct sdhci_host *host, int reg) 317 { 318 u32 ret; 319 320 switch (reg) { 321 case SDHCI_CAPABILITIES: 322 ret = readl_relaxed(host->ioaddr + reg); 323 /* Support 3.3V and 1.8V */ 324 ret &= ~SDHCI_CAN_VDD_300; 325 break; 326 default: 327 ret = readl_relaxed(host->ioaddr + reg); 328 } 329 return ret; 330 } 331 332 static const struct sdhci_ops sdhci_st_ops = { 333 .get_max_clock = sdhci_pltfm_clk_get_max_clock, 334 .set_clock = sdhci_set_clock, 335 .set_bus_width = sdhci_set_bus_width, 336 .read_l = sdhci_st_readl, 337 .reset = sdhci_reset, 338 .set_uhs_signaling = sdhci_st_set_uhs_signaling, 339 }; 340 341 static const struct sdhci_pltfm_data sdhci_st_pdata = { 342 .ops = &sdhci_st_ops, 343 .quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC | 344 SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN | 345 SDHCI_QUIRK_NO_HISPD_BIT, 346 .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN | 347 SDHCI_QUIRK2_STOP_WITH_TC, 348 }; 349 350 351 static int sdhci_st_probe(struct platform_device *pdev) 352 { 353 struct device_node *np = pdev->dev.of_node; 354 struct sdhci_host *host; 355 struct st_mmc_platform_data *pdata; 356 struct sdhci_pltfm_host *pltfm_host; 357 struct clk *clk, *icnclk; 358 int ret = 0; 359 u16 host_version; 360 struct resource *res; 361 struct reset_control *rstc; 362 363 clk = devm_clk_get(&pdev->dev, "mmc"); 364 if (IS_ERR(clk)) { 365 dev_err(&pdev->dev, "Peripheral clk not found\n"); 366 return PTR_ERR(clk); 367 } 368 369 /* ICN clock isn't compulsory, but use it if it's provided. */ 370 icnclk = devm_clk_get(&pdev->dev, "icn"); 371 if (IS_ERR(icnclk)) 372 icnclk = NULL; 373 374 rstc = devm_reset_control_get_exclusive(&pdev->dev, NULL); 375 if (IS_ERR(rstc)) 376 rstc = NULL; 377 else 378 reset_control_deassert(rstc); 379 380 host = sdhci_pltfm_init(pdev, &sdhci_st_pdata, sizeof(*pdata)); 381 if (IS_ERR(host)) { 382 dev_err(&pdev->dev, "Failed sdhci_pltfm_init\n"); 383 ret = PTR_ERR(host); 384 goto err_pltfm_init; 385 } 386 387 pltfm_host = sdhci_priv(host); 388 pdata = sdhci_pltfm_priv(pltfm_host); 389 pdata->rstc = rstc; 390 391 ret = mmc_of_parse(host->mmc); 392 if (ret) { 393 dev_err(&pdev->dev, "Failed mmc_of_parse\n"); 394 goto err_of; 395 } 396 397 ret = clk_prepare_enable(clk); 398 if (ret) { 399 dev_err(&pdev->dev, "Failed to prepare clock\n"); 400 goto err_of; 401 } 402 403 ret = clk_prepare_enable(icnclk); 404 if (ret) { 405 dev_err(&pdev->dev, "Failed to prepare icn clock\n"); 406 goto err_icnclk; 407 } 408 409 /* Configure the FlashSS Top registers for setting eMMC TX/RX delay */ 410 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, 411 "top-mmc-delay"); 412 pdata->top_ioaddr = devm_ioremap_resource(&pdev->dev, res); 413 if (IS_ERR(pdata->top_ioaddr)) { 414 dev_warn(&pdev->dev, "FlashSS Top Dly registers not available"); 415 pdata->top_ioaddr = NULL; 416 } 417 418 pltfm_host->clk = clk; 419 pdata->icnclk = icnclk; 420 421 /* Configure the Arasan HC inside the flashSS */ 422 st_mmcss_cconfig(np, host); 423 424 ret = sdhci_add_host(host); 425 if (ret) 426 goto err_out; 427 428 host_version = readw_relaxed((host->ioaddr + SDHCI_HOST_VERSION)); 429 430 dev_info(&pdev->dev, "SDHCI ST Initialised: Host Version: 0x%x Vendor Version 0x%x\n", 431 ((host_version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT), 432 ((host_version & SDHCI_VENDOR_VER_MASK) >> 433 SDHCI_VENDOR_VER_SHIFT)); 434 435 return 0; 436 437 err_out: 438 clk_disable_unprepare(icnclk); 439 err_icnclk: 440 clk_disable_unprepare(clk); 441 err_of: 442 sdhci_pltfm_free(pdev); 443 err_pltfm_init: 444 if (rstc) 445 reset_control_assert(rstc); 446 447 return ret; 448 } 449 450 static int sdhci_st_remove(struct platform_device *pdev) 451 { 452 struct sdhci_host *host = platform_get_drvdata(pdev); 453 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 454 struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host); 455 struct reset_control *rstc = pdata->rstc; 456 int ret; 457 458 ret = sdhci_pltfm_unregister(pdev); 459 460 clk_disable_unprepare(pdata->icnclk); 461 462 if (rstc) 463 reset_control_assert(rstc); 464 465 return ret; 466 } 467 468 #ifdef CONFIG_PM_SLEEP 469 static int sdhci_st_suspend(struct device *dev) 470 { 471 struct sdhci_host *host = dev_get_drvdata(dev); 472 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 473 struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host); 474 int ret; 475 476 if (host->tuning_mode != SDHCI_TUNING_MODE_3) 477 mmc_retune_needed(host->mmc); 478 479 ret = sdhci_suspend_host(host); 480 if (ret) 481 goto out; 482 483 if (pdata->rstc) 484 reset_control_assert(pdata->rstc); 485 486 clk_disable_unprepare(pdata->icnclk); 487 clk_disable_unprepare(pltfm_host->clk); 488 out: 489 return ret; 490 } 491 492 static int sdhci_st_resume(struct device *dev) 493 { 494 struct sdhci_host *host = dev_get_drvdata(dev); 495 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 496 struct st_mmc_platform_data *pdata = sdhci_pltfm_priv(pltfm_host); 497 struct device_node *np = dev->of_node; 498 int ret; 499 500 ret = clk_prepare_enable(pltfm_host->clk); 501 if (ret) 502 return ret; 503 504 ret = clk_prepare_enable(pdata->icnclk); 505 if (ret) { 506 clk_disable_unprepare(pltfm_host->clk); 507 return ret; 508 } 509 510 if (pdata->rstc) 511 reset_control_deassert(pdata->rstc); 512 513 st_mmcss_cconfig(np, host); 514 515 return sdhci_resume_host(host); 516 } 517 #endif 518 519 static SIMPLE_DEV_PM_OPS(sdhci_st_pmops, sdhci_st_suspend, sdhci_st_resume); 520 521 static const struct of_device_id st_sdhci_match[] = { 522 { .compatible = "st,sdhci" }, 523 {}, 524 }; 525 526 MODULE_DEVICE_TABLE(of, st_sdhci_match); 527 528 static struct platform_driver sdhci_st_driver = { 529 .probe = sdhci_st_probe, 530 .remove = sdhci_st_remove, 531 .driver = { 532 .name = "sdhci-st", 533 .pm = &sdhci_st_pmops, 534 .of_match_table = of_match_ptr(st_sdhci_match), 535 }, 536 }; 537 538 module_platform_driver(sdhci_st_driver); 539 540 MODULE_DESCRIPTION("SDHCI driver for STMicroelectronics SoCs"); 541 MODULE_AUTHOR("Giuseppe Cavallaro <peppe.cavallaro@st.com>"); 542 MODULE_LICENSE("GPL v2"); 543 MODULE_ALIAS("platform:sdhci-st"); 544