xref: /openbmc/linux/drivers/mmc/host/sdhci-s3c.c (revision fa0dadde) 
1 // SPDX-License-Identifier: GPL-2.0-only
2 /* linux/drivers/mmc/host/sdhci-s3c.c
3  *
4  * Copyright 2008 Openmoko Inc.
5  * Copyright 2008 Simtec Electronics
6  *      Ben Dooks <ben@simtec.co.uk>
7  *      http://armlinux.simtec.co.uk/
8  *
9  * SDHCI (HSMMC) support for Samsung SoC
10  */
11 
12 #include <linux/spinlock.h>
13 #include <linux/delay.h>
14 #include <linux/dma-mapping.h>
15 #include <linux/platform_device.h>
16 #include <linux/platform_data/mmc-sdhci-s3c.h>
17 #include <linux/slab.h>
18 #include <linux/clk.h>
19 #include <linux/io.h>
20 #include <linux/gpio.h>
21 #include <linux/module.h>
22 #include <linux/of.h>
23 #include <linux/of_device.h>
24 #include <linux/of_gpio.h>
25 #include <linux/pm.h>
26 #include <linux/pm_runtime.h>
27 
28 #include <linux/mmc/host.h>
29 
30 #include "sdhci.h"
31 
32 #define MAX_BUS_CLK	(4)
33 
34 #define S3C_SDHCI_CONTROL2			(0x80)
35 #define S3C_SDHCI_CONTROL3			(0x84)
36 #define S3C64XX_SDHCI_CONTROL4			(0x8C)
37 
38 #define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR	BIT(31)
39 #define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK		BIT(30)
40 #define S3C_SDHCI_CTRL2_CDINVRXD3		BIT(29)
41 #define S3C_SDHCI_CTRL2_SLCARDOUT		BIT(28)
42 
43 #define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK		(0xf << 24)
44 #define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT		(24)
45 #define S3C_SDHCI_CTRL2_FLTCLKSEL(_x)		((_x) << 24)
46 
47 #define S3C_SDHCI_CTRL2_LVLDAT_MASK		(0xff << 16)
48 #define S3C_SDHCI_CTRL2_LVLDAT_SHIFT		(16)
49 #define S3C_SDHCI_CTRL2_LVLDAT(_x)		((_x) << 16)
50 
51 #define S3C_SDHCI_CTRL2_ENFBCLKTX		BIT(15)
52 #define S3C_SDHCI_CTRL2_ENFBCLKRX		BIT(14)
53 #define S3C_SDHCI_CTRL2_SDCDSEL			BIT(13)
54 #define S3C_SDHCI_CTRL2_SDSIGPC			BIT(12)
55 #define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART	BIT(11)
56 
57 #define S3C_SDHCI_CTRL2_DFCNT_MASK		(0x3 << 9)
58 #define S3C_SDHCI_CTRL2_DFCNT_SHIFT		(9)
59 #define S3C_SDHCI_CTRL2_DFCNT_NONE		(0x0 << 9)
60 #define S3C_SDHCI_CTRL2_DFCNT_4SDCLK		(0x1 << 9)
61 #define S3C_SDHCI_CTRL2_DFCNT_16SDCLK		(0x2 << 9)
62 #define S3C_SDHCI_CTRL2_DFCNT_64SDCLK		(0x3 << 9)
63 
64 #define S3C_SDHCI_CTRL2_ENCLKOUTHOLD		BIT(8)
65 #define S3C_SDHCI_CTRL2_RWAITMODE		BIT(7)
66 #define S3C_SDHCI_CTRL2_DISBUFRD		BIT(6)
67 
68 #define S3C_SDHCI_CTRL2_SELBASECLK_MASK		(0x3 << 4)
69 #define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT	(4)
70 #define S3C_SDHCI_CTRL2_PWRSYNC			BIT(3)
71 #define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON		BIT(1)
72 #define S3C_SDHCI_CTRL2_HWINITFIN		BIT(0)
73 
74 #define S3C_SDHCI_CTRL3_FCSEL3			BIT(31)
75 #define S3C_SDHCI_CTRL3_FCSEL2			BIT(23)
76 #define S3C_SDHCI_CTRL3_FCSEL1			BIT(15)
77 #define S3C_SDHCI_CTRL3_FCSEL0			BIT(7)
78 
79 #define S3C_SDHCI_CTRL3_FIA3_MASK		(0x7f << 24)
80 #define S3C_SDHCI_CTRL3_FIA3_SHIFT		(24)
81 #define S3C_SDHCI_CTRL3_FIA3(_x)		((_x) << 24)
82 
83 #define S3C_SDHCI_CTRL3_FIA2_MASK		(0x7f << 16)
84 #define S3C_SDHCI_CTRL3_FIA2_SHIFT		(16)
85 #define S3C_SDHCI_CTRL3_FIA2(_x)		((_x) << 16)
86 
87 #define S3C_SDHCI_CTRL3_FIA1_MASK		(0x7f << 8)
88 #define S3C_SDHCI_CTRL3_FIA1_SHIFT		(8)
89 #define S3C_SDHCI_CTRL3_FIA1(_x)		((_x) << 8)
90 
91 #define S3C_SDHCI_CTRL3_FIA0_MASK		(0x7f << 0)
92 #define S3C_SDHCI_CTRL3_FIA0_SHIFT		(0)
93 #define S3C_SDHCI_CTRL3_FIA0(_x)		((_x) << 0)
94 
95 #define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK	(0x3 << 16)
96 #define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT	(16)
97 #define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA	(0x0 << 16)
98 #define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA	(0x1 << 16)
99 #define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA	(0x2 << 16)
100 #define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA	(0x3 << 16)
101 
102 #define S3C64XX_SDHCI_CONTROL4_BUSY		(1)
103 
104 /**
105  * struct sdhci_s3c - S3C SDHCI instance
106  * @host: The SDHCI host created
107  * @pdev: The platform device we where created from.
108  * @ioarea: The resource created when we claimed the IO area.
109  * @pdata: The platform data for this controller.
110  * @cur_clk: The index of the current bus clock.
111  * @ext_cd_irq: External card detect interrupt.
112  * @clk_io: The clock for the internal bus interface.
113  * @clk_rates: Clock frequencies.
114  * @clk_bus: The clocks that are available for the SD/MMC bus clock.
115  * @no_divider: No or non-standard internal clock divider.
116  */
117 struct sdhci_s3c {
118 	struct sdhci_host	*host;
119 	struct platform_device	*pdev;
120 	struct resource		*ioarea;
121 	struct s3c_sdhci_platdata *pdata;
122 	int			cur_clk;
123 	int			ext_cd_irq;
124 
125 	struct clk		*clk_io;
126 	struct clk		*clk_bus[MAX_BUS_CLK];
127 	unsigned long		clk_rates[MAX_BUS_CLK];
128 
129 	bool			no_divider;
130 };
131 
132 /**
133  * struct sdhci_s3c_drv_data - S3C SDHCI platform specific driver data
134  * @sdhci_quirks: sdhci host specific quirks.
135  * @no_divider: no or non-standard internal clock divider.
136  *
137  * Specifies platform specific configuration of sdhci controller.
138  * Note: A structure for driver specific platform data is used for future
139  * expansion of its usage.
140  */
141 struct sdhci_s3c_drv_data {
142 	unsigned int	sdhci_quirks;
143 	bool		no_divider;
144 };
145 
146 static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
147 {
148 	return sdhci_priv(host);
149 }
150 
151 /**
152  * sdhci_s3c_get_max_clk - callback to get maximum clock frequency.
153  * @host: The SDHCI host instance.
154  *
155  * Callback to return the maximum clock rate acheivable by the controller.
156 */
157 static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
158 {
159 	struct sdhci_s3c *ourhost = to_s3c(host);
160 	unsigned long rate, max = 0;
161 	int src;
162 
163 	for (src = 0; src < MAX_BUS_CLK; src++) {
164 		rate = ourhost->clk_rates[src];
165 		if (rate > max)
166 			max = rate;
167 	}
168 
169 	return max;
170 }
171 
172 /**
173  * sdhci_s3c_consider_clock - consider one the bus clocks for current setting
174  * @ourhost: Our SDHCI instance.
175  * @src: The source clock index.
176  * @wanted: The clock frequency wanted.
177  */
178 static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
179 					     unsigned int src,
180 					     unsigned int wanted)
181 {
182 	unsigned long rate;
183 	struct clk *clksrc = ourhost->clk_bus[src];
184 	int shift;
185 
186 	if (IS_ERR(clksrc))
187 		return UINT_MAX;
188 
189 	/*
190 	 * If controller uses a non-standard clock division, find the best clock
191 	 * speed possible with selected clock source and skip the division.
192 	 */
193 	if (ourhost->no_divider) {
194 		rate = clk_round_rate(clksrc, wanted);
195 		return wanted - rate;
196 	}
197 
198 	rate = ourhost->clk_rates[src];
199 
200 	for (shift = 0; shift <= 8; ++shift) {
201 		if ((rate >> shift) <= wanted)
202 			break;
203 	}
204 
205 	if (shift > 8) {
206 		dev_dbg(&ourhost->pdev->dev,
207 			"clk %d: rate %ld, min rate %lu > wanted %u\n",
208 			src, rate, rate / 256, wanted);
209 		return UINT_MAX;
210 	}
211 
212 	dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n",
213 		src, rate, wanted, rate >> shift);
214 
215 	return wanted - (rate >> shift);
216 }
217 
218 /**
219  * sdhci_s3c_set_clock - callback on clock change
220  * @host: The SDHCI host being changed
221  * @clock: The clock rate being requested.
222  *
223  * When the card's clock is going to be changed, look at the new frequency
224  * and find the best clock source to go with it.
225 */
226 static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
227 {
228 	struct sdhci_s3c *ourhost = to_s3c(host);
229 	unsigned int best = UINT_MAX;
230 	unsigned int delta;
231 	int best_src = 0;
232 	int src;
233 	u32 ctrl;
234 
235 	host->mmc->actual_clock = 0;
236 
237 	/* don't bother if the clock is going off. */
238 	if (clock == 0) {
239 		sdhci_set_clock(host, clock);
240 		return;
241 	}
242 
243 	for (src = 0; src < MAX_BUS_CLK; src++) {
244 		delta = sdhci_s3c_consider_clock(ourhost, src, clock);
245 		if (delta < best) {
246 			best = delta;
247 			best_src = src;
248 		}
249 	}
250 
251 	dev_dbg(&ourhost->pdev->dev,
252 		"selected source %d, clock %d, delta %d\n",
253 		 best_src, clock, best);
254 
255 	/* select the new clock source */
256 	if (ourhost->cur_clk != best_src) {
257 		struct clk *clk = ourhost->clk_bus[best_src];
258 
259 		clk_prepare_enable(clk);
260 		if (ourhost->cur_clk >= 0)
261 			clk_disable_unprepare(
262 					ourhost->clk_bus[ourhost->cur_clk]);
263 
264 		ourhost->cur_clk = best_src;
265 		host->max_clk = ourhost->clk_rates[best_src];
266 	}
267 
268 	/* turn clock off to card before changing clock source */
269 	writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
270 
271 	ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
272 	ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
273 	ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
274 	writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
275 
276 	/* reprogram default hardware configuration */
277 	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA,
278 		host->ioaddr + S3C64XX_SDHCI_CONTROL4);
279 
280 	ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
281 	ctrl |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
282 		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
283 		  S3C_SDHCI_CTRL2_ENFBCLKRX |
284 		  S3C_SDHCI_CTRL2_DFCNT_NONE |
285 		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
286 	writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
287 
288 	/* reconfigure the controller for new clock rate */
289 	ctrl = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
290 	if (clock < 25 * 1000000)
291 		ctrl |= (S3C_SDHCI_CTRL3_FCSEL3 | S3C_SDHCI_CTRL3_FCSEL2);
292 	writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL3);
293 
294 	sdhci_set_clock(host, clock);
295 }
296 
297 /**
298  * sdhci_s3c_get_min_clock - callback to get minimal supported clock value
299  * @host: The SDHCI host being queried
300  *
301  * To init mmc host properly a minimal clock value is needed. For high system
302  * bus clock's values the standard formula gives values out of allowed range.
303  * The clock still can be set to lower values, if clock source other then
304  * system bus is selected.
305 */
306 static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host)
307 {
308 	struct sdhci_s3c *ourhost = to_s3c(host);
309 	unsigned long rate, min = ULONG_MAX;
310 	int src;
311 
312 	for (src = 0; src < MAX_BUS_CLK; src++) {
313 		rate = ourhost->clk_rates[src] / 256;
314 		if (!rate)
315 			continue;
316 		if (rate < min)
317 			min = rate;
318 	}
319 
320 	return min;
321 }
322 
323 /* sdhci_cmu_get_max_clk - callback to get maximum clock frequency.*/
324 static unsigned int sdhci_cmu_get_max_clock(struct sdhci_host *host)
325 {
326 	struct sdhci_s3c *ourhost = to_s3c(host);
327 	unsigned long rate, max = 0;
328 	int src;
329 
330 	for (src = 0; src < MAX_BUS_CLK; src++) {
331 		struct clk *clk;
332 
333 		clk = ourhost->clk_bus[src];
334 		if (IS_ERR(clk))
335 			continue;
336 
337 		rate = clk_round_rate(clk, ULONG_MAX);
338 		if (rate > max)
339 			max = rate;
340 	}
341 
342 	return max;
343 }
344 
345 /* sdhci_cmu_get_min_clock - callback to get minimal supported clock value. */
346 static unsigned int sdhci_cmu_get_min_clock(struct sdhci_host *host)
347 {
348 	struct sdhci_s3c *ourhost = to_s3c(host);
349 	unsigned long rate, min = ULONG_MAX;
350 	int src;
351 
352 	for (src = 0; src < MAX_BUS_CLK; src++) {
353 		struct clk *clk;
354 
355 		clk = ourhost->clk_bus[src];
356 		if (IS_ERR(clk))
357 			continue;
358 
359 		rate = clk_round_rate(clk, 0);
360 		if (rate < min)
361 			min = rate;
362 	}
363 
364 	return min;
365 }
366 
367 /* sdhci_cmu_set_clock - callback on clock change.*/
368 static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
369 {
370 	struct sdhci_s3c *ourhost = to_s3c(host);
371 	struct device *dev = &ourhost->pdev->dev;
372 	unsigned long timeout;
373 	u16 clk = 0;
374 	int ret;
375 
376 	host->mmc->actual_clock = 0;
377 
378 	/* If the clock is going off, set to 0 at clock control register */
379 	if (clock == 0) {
380 		sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
381 		return;
382 	}
383 
384 	sdhci_s3c_set_clock(host, clock);
385 
386 	/* Reset SD Clock Enable */
387 	clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
388 	clk &= ~SDHCI_CLOCK_CARD_EN;
389 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
390 
391 	ret = clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
392 	if (ret != 0) {
393 		dev_err(dev, "%s: failed to set clock rate %uHz\n",
394 			mmc_hostname(host->mmc), clock);
395 		return;
396 	}
397 
398 	clk = SDHCI_CLOCK_INT_EN;
399 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
400 
401 	/* Wait max 20 ms */
402 	timeout = 20;
403 	while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
404 		& SDHCI_CLOCK_INT_STABLE)) {
405 		if (timeout == 0) {
406 			dev_err(dev, "%s: Internal clock never stabilised.\n",
407 				mmc_hostname(host->mmc));
408 			return;
409 		}
410 		timeout--;
411 		mdelay(1);
412 	}
413 
414 	clk |= SDHCI_CLOCK_CARD_EN;
415 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
416 }
417 
418 static struct sdhci_ops sdhci_s3c_ops = {
419 	.get_max_clock		= sdhci_s3c_get_max_clk,
420 	.set_clock		= sdhci_s3c_set_clock,
421 	.get_min_clock		= sdhci_s3c_get_min_clock,
422 	.set_bus_width		= sdhci_set_bus_width,
423 	.reset			= sdhci_reset,
424 	.set_uhs_signaling	= sdhci_set_uhs_signaling,
425 };
426 
427 #ifdef CONFIG_OF
428 static int sdhci_s3c_parse_dt(struct device *dev,
429 		struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
430 {
431 	struct device_node *node = dev->of_node;
432 	u32 max_width;
433 
434 	/* if the bus-width property is not specified, assume width as 1 */
435 	if (of_property_read_u32(node, "bus-width", &max_width))
436 		max_width = 1;
437 	pdata->max_width = max_width;
438 
439 	/* get the card detection method */
440 	if (of_property_read_bool(node, "broken-cd")) {
441 		pdata->cd_type = S3C_SDHCI_CD_NONE;
442 		return 0;
443 	}
444 
445 	if (of_property_read_bool(node, "non-removable")) {
446 		pdata->cd_type = S3C_SDHCI_CD_PERMANENT;
447 		return 0;
448 	}
449 
450 	if (of_get_named_gpio(node, "cd-gpios", 0))
451 		return 0;
452 
453 	/* assuming internal card detect that will be configured by pinctrl */
454 	pdata->cd_type = S3C_SDHCI_CD_INTERNAL;
455 	return 0;
456 }
457 #else
458 static int sdhci_s3c_parse_dt(struct device *dev,
459 		struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
460 {
461 	return -EINVAL;
462 }
463 #endif
464 
465 static inline const struct sdhci_s3c_drv_data *sdhci_s3c_get_driver_data(
466 			struct platform_device *pdev)
467 {
468 #ifdef CONFIG_OF
469 	if (pdev->dev.of_node)
470 		return of_device_get_match_data(&pdev->dev);
471 #endif
472 	return (const struct sdhci_s3c_drv_data *)
473 			platform_get_device_id(pdev)->driver_data;
474 }
475 
476 static int sdhci_s3c_probe(struct platform_device *pdev)
477 {
478 	struct s3c_sdhci_platdata *pdata;
479 	const struct sdhci_s3c_drv_data *drv_data;
480 	struct device *dev = &pdev->dev;
481 	struct sdhci_host *host;
482 	struct sdhci_s3c *sc;
483 	int ret, irq, ptr, clks;
484 
485 	if (!pdev->dev.platform_data && !pdev->dev.of_node) {
486 		dev_err(dev, "no device data specified\n");
487 		return -ENOENT;
488 	}
489 
490 	irq = platform_get_irq(pdev, 0);
491 	if (irq < 0)
492 		return irq;
493 
494 	host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c));
495 	if (IS_ERR(host)) {
496 		dev_err(dev, "sdhci_alloc_host() failed\n");
497 		return PTR_ERR(host);
498 	}
499 	sc = sdhci_priv(host);
500 
501 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
502 	if (!pdata) {
503 		ret = -ENOMEM;
504 		goto err_pdata_io_clk;
505 	}
506 
507 	if (pdev->dev.of_node) {
508 		ret = sdhci_s3c_parse_dt(&pdev->dev, host, pdata);
509 		if (ret)
510 			goto err_pdata_io_clk;
511 	} else {
512 		memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
513 	}
514 
515 	drv_data = sdhci_s3c_get_driver_data(pdev);
516 
517 	sc->host = host;
518 	sc->pdev = pdev;
519 	sc->pdata = pdata;
520 	sc->cur_clk = -1;
521 
522 	platform_set_drvdata(pdev, host);
523 
524 	sc->clk_io = devm_clk_get(dev, "hsmmc");
525 	if (IS_ERR(sc->clk_io)) {
526 		dev_err(dev, "failed to get io clock\n");
527 		ret = PTR_ERR(sc->clk_io);
528 		goto err_pdata_io_clk;
529 	}
530 
531 	/* enable the local io clock and keep it running for the moment. */
532 	clk_prepare_enable(sc->clk_io);
533 
534 	for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
535 		char name[14];
536 
537 		snprintf(name, 14, "mmc_busclk.%d", ptr);
538 		sc->clk_bus[ptr] = devm_clk_get(dev, name);
539 		if (IS_ERR(sc->clk_bus[ptr]))
540 			continue;
541 
542 		clks++;
543 		sc->clk_rates[ptr] = clk_get_rate(sc->clk_bus[ptr]);
544 
545 		dev_info(dev, "clock source %d: %s (%ld Hz)\n",
546 				ptr, name, sc->clk_rates[ptr]);
547 	}
548 
549 	if (clks == 0) {
550 		dev_err(dev, "failed to find any bus clocks\n");
551 		ret = -ENOENT;
552 		goto err_no_busclks;
553 	}
554 
555 	host->ioaddr = devm_platform_ioremap_resource(pdev, 0);
556 	if (IS_ERR(host->ioaddr)) {
557 		ret = PTR_ERR(host->ioaddr);
558 		goto err_req_regs;
559 	}
560 
561 	/* Ensure we have minimal gpio selected CMD/CLK/Detect */
562 	if (pdata->cfg_gpio)
563 		pdata->cfg_gpio(pdev, pdata->max_width);
564 
565 	host->hw_name = "samsung-hsmmc";
566 	host->ops = &sdhci_s3c_ops;
567 	host->quirks = 0;
568 	host->quirks2 = 0;
569 	host->irq = irq;
570 
571 	/* Setup quirks for the controller */
572 	host->quirks |= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC;
573 	host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
574 	if (drv_data) {
575 		host->quirks |= drv_data->sdhci_quirks;
576 		sc->no_divider = drv_data->no_divider;
577 	}
578 
579 #ifndef CONFIG_MMC_SDHCI_S3C_DMA
580 
581 	/* we currently see overruns on errors, so disable the SDMA
582 	 * support as well. */
583 	host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
584 
585 #endif /* CONFIG_MMC_SDHCI_S3C_DMA */
586 
587 	/* It seems we do not get an DATA transfer complete on non-busy
588 	 * transfers, not sure if this is a problem with this specific
589 	 * SDHCI block, or a missing configuration that needs to be set. */
590 	host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ;
591 
592 	/* This host supports the Auto CMD12 */
593 	host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
594 
595 	/* Samsung SoCs need BROKEN_ADMA_ZEROLEN_DESC */
596 	host->quirks |= SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC;
597 
598 	if (pdata->cd_type == S3C_SDHCI_CD_NONE ||
599 	    pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
600 		host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
601 
602 	if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
603 		host->mmc->caps = MMC_CAP_NONREMOVABLE;
604 
605 	switch (pdata->max_width) {
606 	case 8:
607 		host->mmc->caps |= MMC_CAP_8_BIT_DATA;
608 		fallthrough;
609 	case 4:
610 		host->mmc->caps |= MMC_CAP_4_BIT_DATA;
611 		break;
612 	}
613 
614 	if (pdata->pm_caps)
615 		host->mmc->pm_caps |= pdata->pm_caps;
616 
617 	host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
618 			 SDHCI_QUIRK_32BIT_DMA_SIZE);
619 
620 	/* HSMMC on Samsung SoCs uses SDCLK as timeout clock */
621 	host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
622 
623 	/*
624 	 * If controller does not have internal clock divider,
625 	 * we can use overriding functions instead of default.
626 	 */
627 	if (sc->no_divider) {
628 		sdhci_s3c_ops.set_clock = sdhci_cmu_set_clock;
629 		sdhci_s3c_ops.get_min_clock = sdhci_cmu_get_min_clock;
630 		sdhci_s3c_ops.get_max_clock = sdhci_cmu_get_max_clock;
631 	}
632 
633 	/* It supports additional host capabilities if needed */
634 	if (pdata->host_caps)
635 		host->mmc->caps |= pdata->host_caps;
636 
637 	if (pdata->host_caps2)
638 		host->mmc->caps2 |= pdata->host_caps2;
639 
640 	pm_runtime_enable(&pdev->dev);
641 	pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
642 	pm_runtime_use_autosuspend(&pdev->dev);
643 	pm_suspend_ignore_children(&pdev->dev, 1);
644 
645 	ret = mmc_of_parse(host->mmc);
646 	if (ret)
647 		goto err_req_regs;
648 
649 	ret = sdhci_add_host(host);
650 	if (ret)
651 		goto err_req_regs;
652 
653 #ifdef CONFIG_PM
654 	if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
655 		clk_disable_unprepare(sc->clk_io);
656 #endif
657 	return 0;
658 
659  err_req_regs:
660 	pm_runtime_disable(&pdev->dev);
661 
662  err_no_busclks:
663 	clk_disable_unprepare(sc->clk_io);
664 
665  err_pdata_io_clk:
666 	sdhci_free_host(host);
667 
668 	return ret;
669 }
670 
671 static int sdhci_s3c_remove(struct platform_device *pdev)
672 {
673 	struct sdhci_host *host =  platform_get_drvdata(pdev);
674 	struct sdhci_s3c *sc = sdhci_priv(host);
675 
676 	if (sc->ext_cd_irq)
677 		free_irq(sc->ext_cd_irq, sc);
678 
679 #ifdef CONFIG_PM
680 	if (sc->pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
681 		clk_prepare_enable(sc->clk_io);
682 #endif
683 	sdhci_remove_host(host, 1);
684 
685 	pm_runtime_dont_use_autosuspend(&pdev->dev);
686 	pm_runtime_disable(&pdev->dev);
687 
688 	clk_disable_unprepare(sc->clk_io);
689 
690 	sdhci_free_host(host);
691 
692 	return 0;
693 }
694 
695 #ifdef CONFIG_PM_SLEEP
696 static int sdhci_s3c_suspend(struct device *dev)
697 {
698 	struct sdhci_host *host = dev_get_drvdata(dev);
699 
700 	if (host->tuning_mode != SDHCI_TUNING_MODE_3)
701 		mmc_retune_needed(host->mmc);
702 
703 	return sdhci_suspend_host(host);
704 }
705 
706 static int sdhci_s3c_resume(struct device *dev)
707 {
708 	struct sdhci_host *host = dev_get_drvdata(dev);
709 
710 	return sdhci_resume_host(host);
711 }
712 #endif
713 
714 #ifdef CONFIG_PM
715 static int sdhci_s3c_runtime_suspend(struct device *dev)
716 {
717 	struct sdhci_host *host = dev_get_drvdata(dev);
718 	struct sdhci_s3c *ourhost = to_s3c(host);
719 	struct clk *busclk = ourhost->clk_io;
720 	int ret;
721 
722 	ret = sdhci_runtime_suspend_host(host);
723 
724 	if (host->tuning_mode != SDHCI_TUNING_MODE_3)
725 		mmc_retune_needed(host->mmc);
726 
727 	if (ourhost->cur_clk >= 0)
728 		clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]);
729 	clk_disable_unprepare(busclk);
730 	return ret;
731 }
732 
733 static int sdhci_s3c_runtime_resume(struct device *dev)
734 {
735 	struct sdhci_host *host = dev_get_drvdata(dev);
736 	struct sdhci_s3c *ourhost = to_s3c(host);
737 	struct clk *busclk = ourhost->clk_io;
738 	int ret;
739 
740 	clk_prepare_enable(busclk);
741 	if (ourhost->cur_clk >= 0)
742 		clk_prepare_enable(ourhost->clk_bus[ourhost->cur_clk]);
743 	ret = sdhci_runtime_resume_host(host, 0);
744 	return ret;
745 }
746 #endif
747 
748 static const struct dev_pm_ops sdhci_s3c_pmops = {
749 	SET_SYSTEM_SLEEP_PM_OPS(sdhci_s3c_suspend, sdhci_s3c_resume)
750 	SET_RUNTIME_PM_OPS(sdhci_s3c_runtime_suspend, sdhci_s3c_runtime_resume,
751 			   NULL)
752 };
753 
754 static const struct platform_device_id sdhci_s3c_driver_ids[] = {
755 	{
756 		.name		= "s3c-sdhci",
757 		.driver_data	= (kernel_ulong_t)NULL,
758 	},
759 	{ }
760 };
761 MODULE_DEVICE_TABLE(platform, sdhci_s3c_driver_ids);
762 
763 #ifdef CONFIG_OF
764 static const struct sdhci_s3c_drv_data exynos4_sdhci_drv_data = {
765 	.no_divider = true,
766 };
767 
768 static const struct of_device_id sdhci_s3c_dt_match[] = {
769 	{ .compatible = "samsung,s3c6410-sdhci", },
770 	{ .compatible = "samsung,exynos4210-sdhci",
771 		.data = &exynos4_sdhci_drv_data },
772 	{},
773 };
774 MODULE_DEVICE_TABLE(of, sdhci_s3c_dt_match);
775 #endif
776 
777 static struct platform_driver sdhci_s3c_driver = {
778 	.probe		= sdhci_s3c_probe,
779 	.remove		= sdhci_s3c_remove,
780 	.id_table	= sdhci_s3c_driver_ids,
781 	.driver		= {
782 		.name	= "s3c-sdhci",
783 		.probe_type = PROBE_PREFER_ASYNCHRONOUS,
784 		.of_match_table = of_match_ptr(sdhci_s3c_dt_match),
785 		.pm	= &sdhci_s3c_pmops,
786 	},
787 };
788 
789 module_platform_driver(sdhci_s3c_driver);
790 
791 MODULE_DESCRIPTION("Samsung SDHCI (HSMMC) glue");
792 MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
793 MODULE_LICENSE("GPL v2");
794