xref: /openbmc/linux/drivers/mmc/host/sdhci-s3c.c (revision d38dcad4) 
1 /* linux/drivers/mmc/host/sdhci-s3c.c
2  *
3  * Copyright 2008 Openmoko Inc.
4  * Copyright 2008 Simtec Electronics
5  *      Ben Dooks <ben@simtec.co.uk>
6  *      http://armlinux.simtec.co.uk/
7  *
8  * SDHCI (HSMMC) support for Samsung SoC
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License version 2 as
12  * published by the Free Software Foundation.
13  */
14 
15 #include <linux/spinlock.h>
16 #include <linux/delay.h>
17 #include <linux/dma-mapping.h>
18 #include <linux/platform_device.h>
19 #include <linux/platform_data/mmc-sdhci-s3c.h>
20 #include <linux/slab.h>
21 #include <linux/clk.h>
22 #include <linux/io.h>
23 #include <linux/gpio.h>
24 #include <linux/module.h>
25 #include <linux/of.h>
26 #include <linux/of_gpio.h>
27 #include <linux/pm.h>
28 #include <linux/pm_runtime.h>
29 
30 #include <linux/mmc/host.h>
31 
32 #include "sdhci.h"
33 
34 #define MAX_BUS_CLK	(4)
35 
36 #define S3C_SDHCI_CONTROL2			(0x80)
37 #define S3C_SDHCI_CONTROL3			(0x84)
38 #define S3C64XX_SDHCI_CONTROL4			(0x8C)
39 
40 #define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR	BIT(31)
41 #define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK		BIT(30)
42 #define S3C_SDHCI_CTRL2_CDINVRXD3		BIT(29)
43 #define S3C_SDHCI_CTRL2_SLCARDOUT		BIT(28)
44 
45 #define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK		(0xf << 24)
46 #define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT		(24)
47 #define S3C_SDHCI_CTRL2_FLTCLKSEL(_x)		((_x) << 24)
48 
49 #define S3C_SDHCI_CTRL2_LVLDAT_MASK		(0xff << 16)
50 #define S3C_SDHCI_CTRL2_LVLDAT_SHIFT		(16)
51 #define S3C_SDHCI_CTRL2_LVLDAT(_x)		((_x) << 16)
52 
53 #define S3C_SDHCI_CTRL2_ENFBCLKTX		BIT(15)
54 #define S3C_SDHCI_CTRL2_ENFBCLKRX		BIT(14)
55 #define S3C_SDHCI_CTRL2_SDCDSEL			BIT(13)
56 #define S3C_SDHCI_CTRL2_SDSIGPC			BIT(12)
57 #define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART	BIT(11)
58 
59 #define S3C_SDHCI_CTRL2_DFCNT_MASK		(0x3 << 9)
60 #define S3C_SDHCI_CTRL2_DFCNT_SHIFT		(9)
61 #define S3C_SDHCI_CTRL2_DFCNT_NONE		(0x0 << 9)
62 #define S3C_SDHCI_CTRL2_DFCNT_4SDCLK		(0x1 << 9)
63 #define S3C_SDHCI_CTRL2_DFCNT_16SDCLK		(0x2 << 9)
64 #define S3C_SDHCI_CTRL2_DFCNT_64SDCLK		(0x3 << 9)
65 
66 #define S3C_SDHCI_CTRL2_ENCLKOUTHOLD		BIT(8)
67 #define S3C_SDHCI_CTRL2_RWAITMODE		BIT(7)
68 #define S3C_SDHCI_CTRL2_DISBUFRD		BIT(6)
69 
70 #define S3C_SDHCI_CTRL2_SELBASECLK_MASK		(0x3 << 4)
71 #define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT	(4)
72 #define S3C_SDHCI_CTRL2_PWRSYNC			BIT(3)
73 #define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON		BIT(1)
74 #define S3C_SDHCI_CTRL2_HWINITFIN		BIT(0)
75 
76 #define S3C_SDHCI_CTRL3_FCSEL3			BIT(31)
77 #define S3C_SDHCI_CTRL3_FCSEL2			BIT(23)
78 #define S3C_SDHCI_CTRL3_FCSEL1			BIT(15)
79 #define S3C_SDHCI_CTRL3_FCSEL0			BIT(7)
80 
81 #define S3C_SDHCI_CTRL3_FIA3_MASK		(0x7f << 24)
82 #define S3C_SDHCI_CTRL3_FIA3_SHIFT		(24)
83 #define S3C_SDHCI_CTRL3_FIA3(_x)		((_x) << 24)
84 
85 #define S3C_SDHCI_CTRL3_FIA2_MASK		(0x7f << 16)
86 #define S3C_SDHCI_CTRL3_FIA2_SHIFT		(16)
87 #define S3C_SDHCI_CTRL3_FIA2(_x)		((_x) << 16)
88 
89 #define S3C_SDHCI_CTRL3_FIA1_MASK		(0x7f << 8)
90 #define S3C_SDHCI_CTRL3_FIA1_SHIFT		(8)
91 #define S3C_SDHCI_CTRL3_FIA1(_x)		((_x) << 8)
92 
93 #define S3C_SDHCI_CTRL3_FIA0_MASK		(0x7f << 0)
94 #define S3C_SDHCI_CTRL3_FIA0_SHIFT		(0)
95 #define S3C_SDHCI_CTRL3_FIA0(_x)		((_x) << 0)
96 
97 #define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK	(0x3 << 16)
98 #define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT	(16)
99 #define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA	(0x0 << 16)
100 #define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA	(0x1 << 16)
101 #define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA	(0x2 << 16)
102 #define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA	(0x3 << 16)
103 
104 #define S3C64XX_SDHCI_CONTROL4_BUSY		(1)
105 
106 /**
107  * struct sdhci_s3c - S3C SDHCI instance
108  * @host: The SDHCI host created
109  * @pdev: The platform device we where created from.
110  * @ioarea: The resource created when we claimed the IO area.
111  * @pdata: The platform data for this controller.
112  * @cur_clk: The index of the current bus clock.
113  * @clk_io: The clock for the internal bus interface.
114  * @clk_bus: The clocks that are available for the SD/MMC bus clock.
115  */
116 struct sdhci_s3c {
117 	struct sdhci_host	*host;
118 	struct platform_device	*pdev;
119 	struct resource		*ioarea;
120 	struct s3c_sdhci_platdata *pdata;
121 	int			cur_clk;
122 	int			ext_cd_irq;
123 	int			ext_cd_gpio;
124 
125 	struct clk		*clk_io;
126 	struct clk		*clk_bus[MAX_BUS_CLK];
127 	unsigned long		clk_rates[MAX_BUS_CLK];
128 
129 	bool			no_divider;
130 };
131 
132 /**
133  * struct sdhci_s3c_driver_data - S3C SDHCI platform specific driver data
134  * @sdhci_quirks: sdhci host specific quirks.
135  *
136  * Specifies platform specific configuration of sdhci controller.
137  * Note: A structure for driver specific platform data is used for future
138  * expansion of its usage.
139  */
140 struct sdhci_s3c_drv_data {
141 	unsigned int	sdhci_quirks;
142 	bool		no_divider;
143 };
144 
145 static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
146 {
147 	return sdhci_priv(host);
148 }
149 
150 /**
151  * sdhci_s3c_get_max_clk - callback to get maximum clock frequency.
152  * @host: The SDHCI host instance.
153  *
154  * Callback to return the maximum clock rate acheivable by the controller.
155 */
156 static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
157 {
158 	struct sdhci_s3c *ourhost = to_s3c(host);
159 	unsigned long rate, max = 0;
160 	int src;
161 
162 	for (src = 0; src < MAX_BUS_CLK; src++) {
163 		rate = ourhost->clk_rates[src];
164 		if (rate > max)
165 			max = rate;
166 	}
167 
168 	return max;
169 }
170 
171 /**
172  * sdhci_s3c_consider_clock - consider one the bus clocks for current setting
173  * @ourhost: Our SDHCI instance.
174  * @src: The source clock index.
175  * @wanted: The clock frequency wanted.
176  */
177 static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
178 					     unsigned int src,
179 					     unsigned int wanted)
180 {
181 	unsigned long rate;
182 	struct clk *clksrc = ourhost->clk_bus[src];
183 	int shift;
184 
185 	if (IS_ERR(clksrc))
186 		return UINT_MAX;
187 
188 	/*
189 	 * If controller uses a non-standard clock division, find the best clock
190 	 * speed possible with selected clock source and skip the division.
191 	 */
192 	if (ourhost->no_divider) {
193 		spin_unlock_irq(&ourhost->host->lock);
194 		rate = clk_round_rate(clksrc, wanted);
195 		spin_lock_irq(&ourhost->host->lock);
196 		return wanted - rate;
197 	}
198 
199 	rate = ourhost->clk_rates[src];
200 
201 	for (shift = 0; shift <= 8; ++shift) {
202 		if ((rate >> shift) <= wanted)
203 			break;
204 	}
205 
206 	if (shift > 8) {
207 		dev_dbg(&ourhost->pdev->dev,
208 			"clk %d: rate %ld, min rate %lu > wanted %u\n",
209 			src, rate, rate / 256, wanted);
210 		return UINT_MAX;
211 	}
212 
213 	dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n",
214 		src, rate, wanted, rate >> shift);
215 
216 	return wanted - (rate >> shift);
217 }
218 
219 /**
220  * sdhci_s3c_set_clock - callback on clock change
221  * @host: The SDHCI host being changed
222  * @clock: The clock rate being requested.
223  *
224  * When the card's clock is going to be changed, look at the new frequency
225  * and find the best clock source to go with it.
226 */
227 static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
228 {
229 	struct sdhci_s3c *ourhost = to_s3c(host);
230 	unsigned int best = UINT_MAX;
231 	unsigned int delta;
232 	int best_src = 0;
233 	int src;
234 	u32 ctrl;
235 
236 	host->mmc->actual_clock = 0;
237 
238 	/* don't bother if the clock is going off. */
239 	if (clock == 0) {
240 		sdhci_set_clock(host, clock);
241 		return;
242 	}
243 
244 	for (src = 0; src < MAX_BUS_CLK; src++) {
245 		delta = sdhci_s3c_consider_clock(ourhost, src, clock);
246 		if (delta < best) {
247 			best = delta;
248 			best_src = src;
249 		}
250 	}
251 
252 	dev_dbg(&ourhost->pdev->dev,
253 		"selected source %d, clock %d, delta %d\n",
254 		 best_src, clock, best);
255 
256 	/* select the new clock source */
257 	if (ourhost->cur_clk != best_src) {
258 		struct clk *clk = ourhost->clk_bus[best_src];
259 
260 		clk_prepare_enable(clk);
261 		if (ourhost->cur_clk >= 0)
262 			clk_disable_unprepare(
263 					ourhost->clk_bus[ourhost->cur_clk]);
264 
265 		ourhost->cur_clk = best_src;
266 		host->max_clk = ourhost->clk_rates[best_src];
267 	}
268 
269 	/* turn clock off to card before changing clock source */
270 	writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
271 
272 	ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
273 	ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
274 	ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
275 	writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
276 
277 	/* reprogram default hardware configuration */
278 	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA,
279 		host->ioaddr + S3C64XX_SDHCI_CONTROL4);
280 
281 	ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
282 	ctrl |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
283 		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
284 		  S3C_SDHCI_CTRL2_ENFBCLKRX |
285 		  S3C_SDHCI_CTRL2_DFCNT_NONE |
286 		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
287 	writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
288 
289 	/* reconfigure the controller for new clock rate */
290 	ctrl = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
291 	if (clock < 25 * 1000000)
292 		ctrl |= (S3C_SDHCI_CTRL3_FCSEL3 | S3C_SDHCI_CTRL3_FCSEL2);
293 	writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL3);
294 
295 	sdhci_set_clock(host, clock);
296 }
297 
298 /**
299  * sdhci_s3c_get_min_clock - callback to get minimal supported clock value
300  * @host: The SDHCI host being queried
301  *
302  * To init mmc host properly a minimal clock value is needed. For high system
303  * bus clock's values the standard formula gives values out of allowed range.
304  * The clock still can be set to lower values, if clock source other then
305  * system bus is selected.
306 */
307 static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host)
308 {
309 	struct sdhci_s3c *ourhost = to_s3c(host);
310 	unsigned long rate, min = ULONG_MAX;
311 	int src;
312 
313 	for (src = 0; src < MAX_BUS_CLK; src++) {
314 		rate = ourhost->clk_rates[src] / 256;
315 		if (!rate)
316 			continue;
317 		if (rate < min)
318 			min = rate;
319 	}
320 
321 	return min;
322 }
323 
324 /* sdhci_cmu_get_max_clk - callback to get maximum clock frequency.*/
325 static unsigned int sdhci_cmu_get_max_clock(struct sdhci_host *host)
326 {
327 	struct sdhci_s3c *ourhost = to_s3c(host);
328 	unsigned long rate, max = 0;
329 	int src;
330 
331 	for (src = 0; src < MAX_BUS_CLK; src++) {
332 		struct clk *clk;
333 
334 		clk = ourhost->clk_bus[src];
335 		if (IS_ERR(clk))
336 			continue;
337 
338 		rate = clk_round_rate(clk, ULONG_MAX);
339 		if (rate > max)
340 			max = rate;
341 	}
342 
343 	return max;
344 }
345 
346 /* sdhci_cmu_get_min_clock - callback to get minimal supported clock value. */
347 static unsigned int sdhci_cmu_get_min_clock(struct sdhci_host *host)
348 {
349 	struct sdhci_s3c *ourhost = to_s3c(host);
350 	unsigned long rate, min = ULONG_MAX;
351 	int src;
352 
353 	for (src = 0; src < MAX_BUS_CLK; src++) {
354 		struct clk *clk;
355 
356 		clk = ourhost->clk_bus[src];
357 		if (IS_ERR(clk))
358 			continue;
359 
360 		rate = clk_round_rate(clk, 0);
361 		if (rate < min)
362 			min = rate;
363 	}
364 
365 	return min;
366 }
367 
368 /* sdhci_cmu_set_clock - callback on clock change.*/
369 static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
370 {
371 	struct sdhci_s3c *ourhost = to_s3c(host);
372 	struct device *dev = &ourhost->pdev->dev;
373 	unsigned long timeout;
374 	u16 clk = 0;
375 	int ret;
376 
377 	host->mmc->actual_clock = 0;
378 
379 	/* If the clock is going off, set to 0 at clock control register */
380 	if (clock == 0) {
381 		sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
382 		return;
383 	}
384 
385 	sdhci_s3c_set_clock(host, clock);
386 
387 	/* Reset SD Clock Enable */
388 	clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
389 	clk &= ~SDHCI_CLOCK_CARD_EN;
390 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
391 
392 	spin_unlock_irq(&host->lock);
393 	ret = clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
394 	spin_lock_irq(&host->lock);
395 	if (ret != 0) {
396 		dev_err(dev, "%s: failed to set clock rate %uHz\n",
397 			mmc_hostname(host->mmc), clock);
398 		return;
399 	}
400 
401 	clk = SDHCI_CLOCK_INT_EN;
402 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
403 
404 	/* Wait max 20 ms */
405 	timeout = 20;
406 	while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
407 		& SDHCI_CLOCK_INT_STABLE)) {
408 		if (timeout == 0) {
409 			dev_err(dev, "%s: Internal clock never stabilised.\n",
410 				mmc_hostname(host->mmc));
411 			return;
412 		}
413 		timeout--;
414 		mdelay(1);
415 	}
416 
417 	clk |= SDHCI_CLOCK_CARD_EN;
418 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
419 }
420 
421 /**
422  * sdhci_s3c_set_bus_width - support 8bit buswidth
423  * @host: The SDHCI host being queried
424  * @width: MMC_BUS_WIDTH_ macro for the bus width being requested
425  *
426  * We have 8-bit width support but is not a v3 controller.
427  * So we add platform_bus_width() and support 8bit width.
428  */
429 static void sdhci_s3c_set_bus_width(struct sdhci_host *host, int width)
430 {
431 	u8 ctrl;
432 
433 	ctrl = sdhci_readb(host, SDHCI_HOST_CONTROL);
434 
435 	switch (width) {
436 	case MMC_BUS_WIDTH_8:
437 		ctrl |= SDHCI_CTRL_8BITBUS;
438 		ctrl &= ~SDHCI_CTRL_4BITBUS;
439 		break;
440 	case MMC_BUS_WIDTH_4:
441 		ctrl |= SDHCI_CTRL_4BITBUS;
442 		ctrl &= ~SDHCI_CTRL_8BITBUS;
443 		break;
444 	default:
445 		ctrl &= ~SDHCI_CTRL_4BITBUS;
446 		ctrl &= ~SDHCI_CTRL_8BITBUS;
447 		break;
448 	}
449 
450 	sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL);
451 }
452 
453 static struct sdhci_ops sdhci_s3c_ops = {
454 	.get_max_clock		= sdhci_s3c_get_max_clk,
455 	.set_clock		= sdhci_s3c_set_clock,
456 	.get_min_clock		= sdhci_s3c_get_min_clock,
457 	.set_bus_width		= sdhci_s3c_set_bus_width,
458 	.reset			= sdhci_reset,
459 	.set_uhs_signaling	= sdhci_set_uhs_signaling,
460 };
461 
462 #ifdef CONFIG_OF
463 static int sdhci_s3c_parse_dt(struct device *dev,
464 		struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
465 {
466 	struct device_node *node = dev->of_node;
467 	u32 max_width;
468 
469 	/* if the bus-width property is not specified, assume width as 1 */
470 	if (of_property_read_u32(node, "bus-width", &max_width))
471 		max_width = 1;
472 	pdata->max_width = max_width;
473 
474 	/* get the card detection method */
475 	if (of_get_property(node, "broken-cd", NULL)) {
476 		pdata->cd_type = S3C_SDHCI_CD_NONE;
477 		return 0;
478 	}
479 
480 	if (of_get_property(node, "non-removable", NULL)) {
481 		pdata->cd_type = S3C_SDHCI_CD_PERMANENT;
482 		return 0;
483 	}
484 
485 	if (of_get_named_gpio(node, "cd-gpios", 0))
486 		return 0;
487 
488 	/* assuming internal card detect that will be configured by pinctrl */
489 	pdata->cd_type = S3C_SDHCI_CD_INTERNAL;
490 	return 0;
491 }
492 #else
493 static int sdhci_s3c_parse_dt(struct device *dev,
494 		struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
495 {
496 	return -EINVAL;
497 }
498 #endif
499 
500 static const struct of_device_id sdhci_s3c_dt_match[];
501 
502 static inline struct sdhci_s3c_drv_data *sdhci_s3c_get_driver_data(
503 			struct platform_device *pdev)
504 {
505 #ifdef CONFIG_OF
506 	if (pdev->dev.of_node) {
507 		const struct of_device_id *match;
508 		match = of_match_node(sdhci_s3c_dt_match, pdev->dev.of_node);
509 		return (struct sdhci_s3c_drv_data *)match->data;
510 	}
511 #endif
512 	return (struct sdhci_s3c_drv_data *)
513 			platform_get_device_id(pdev)->driver_data;
514 }
515 
516 static int sdhci_s3c_probe(struct platform_device *pdev)
517 {
518 	struct s3c_sdhci_platdata *pdata;
519 	struct sdhci_s3c_drv_data *drv_data;
520 	struct device *dev = &pdev->dev;
521 	struct sdhci_host *host;
522 	struct sdhci_s3c *sc;
523 	struct resource *res;
524 	int ret, irq, ptr, clks;
525 
526 	if (!pdev->dev.platform_data && !pdev->dev.of_node) {
527 		dev_err(dev, "no device data specified\n");
528 		return -ENOENT;
529 	}
530 
531 	irq = platform_get_irq(pdev, 0);
532 	if (irq < 0) {
533 		dev_err(dev, "no irq specified\n");
534 		return irq;
535 	}
536 
537 	host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c));
538 	if (IS_ERR(host)) {
539 		dev_err(dev, "sdhci_alloc_host() failed\n");
540 		return PTR_ERR(host);
541 	}
542 	sc = sdhci_priv(host);
543 
544 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
545 	if (!pdata) {
546 		ret = -ENOMEM;
547 		goto err_pdata_io_clk;
548 	}
549 
550 	if (pdev->dev.of_node) {
551 		ret = sdhci_s3c_parse_dt(&pdev->dev, host, pdata);
552 		if (ret)
553 			goto err_pdata_io_clk;
554 	} else {
555 		memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
556 		sc->ext_cd_gpio = -1; /* invalid gpio number */
557 	}
558 
559 	drv_data = sdhci_s3c_get_driver_data(pdev);
560 
561 	sc->host = host;
562 	sc->pdev = pdev;
563 	sc->pdata = pdata;
564 	sc->cur_clk = -1;
565 
566 	platform_set_drvdata(pdev, host);
567 
568 	sc->clk_io = devm_clk_get(dev, "hsmmc");
569 	if (IS_ERR(sc->clk_io)) {
570 		dev_err(dev, "failed to get io clock\n");
571 		ret = PTR_ERR(sc->clk_io);
572 		goto err_pdata_io_clk;
573 	}
574 
575 	/* enable the local io clock and keep it running for the moment. */
576 	clk_prepare_enable(sc->clk_io);
577 
578 	for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
579 		char name[14];
580 
581 		snprintf(name, 14, "mmc_busclk.%d", ptr);
582 		sc->clk_bus[ptr] = devm_clk_get(dev, name);
583 		if (IS_ERR(sc->clk_bus[ptr]))
584 			continue;
585 
586 		clks++;
587 		sc->clk_rates[ptr] = clk_get_rate(sc->clk_bus[ptr]);
588 
589 		dev_info(dev, "clock source %d: %s (%ld Hz)\n",
590 				ptr, name, sc->clk_rates[ptr]);
591 	}
592 
593 	if (clks == 0) {
594 		dev_err(dev, "failed to find any bus clocks\n");
595 		ret = -ENOENT;
596 		goto err_no_busclks;
597 	}
598 
599 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
600 	host->ioaddr = devm_ioremap_resource(&pdev->dev, res);
601 	if (IS_ERR(host->ioaddr)) {
602 		ret = PTR_ERR(host->ioaddr);
603 		goto err_req_regs;
604 	}
605 
606 	/* Ensure we have minimal gpio selected CMD/CLK/Detect */
607 	if (pdata->cfg_gpio)
608 		pdata->cfg_gpio(pdev, pdata->max_width);
609 
610 	host->hw_name = "samsung-hsmmc";
611 	host->ops = &sdhci_s3c_ops;
612 	host->quirks = 0;
613 	host->quirks2 = 0;
614 	host->irq = irq;
615 
616 	/* Setup quirks for the controller */
617 	host->quirks |= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC;
618 	host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
619 	if (drv_data) {
620 		host->quirks |= drv_data->sdhci_quirks;
621 		sc->no_divider = drv_data->no_divider;
622 	}
623 
624 #ifndef CONFIG_MMC_SDHCI_S3C_DMA
625 
626 	/* we currently see overruns on errors, so disable the SDMA
627 	 * support as well. */
628 	host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
629 
630 #endif /* CONFIG_MMC_SDHCI_S3C_DMA */
631 
632 	/* It seems we do not get an DATA transfer complete on non-busy
633 	 * transfers, not sure if this is a problem with this specific
634 	 * SDHCI block, or a missing configuration that needs to be set. */
635 	host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ;
636 
637 	/* This host supports the Auto CMD12 */
638 	host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
639 
640 	/* Samsung SoCs need BROKEN_ADMA_ZEROLEN_DESC */
641 	host->quirks |= SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC;
642 
643 	if (pdata->cd_type == S3C_SDHCI_CD_NONE ||
644 	    pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
645 		host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
646 
647 	if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
648 		host->mmc->caps = MMC_CAP_NONREMOVABLE;
649 
650 	switch (pdata->max_width) {
651 	case 8:
652 		host->mmc->caps |= MMC_CAP_8_BIT_DATA;
653 	case 4:
654 		host->mmc->caps |= MMC_CAP_4_BIT_DATA;
655 		break;
656 	}
657 
658 	if (pdata->pm_caps)
659 		host->mmc->pm_caps |= pdata->pm_caps;
660 
661 	host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
662 			 SDHCI_QUIRK_32BIT_DMA_SIZE);
663 
664 	/* HSMMC on Samsung SoCs uses SDCLK as timeout clock */
665 	host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
666 
667 	/*
668 	 * If controller does not have internal clock divider,
669 	 * we can use overriding functions instead of default.
670 	 */
671 	if (sc->no_divider) {
672 		sdhci_s3c_ops.set_clock = sdhci_cmu_set_clock;
673 		sdhci_s3c_ops.get_min_clock = sdhci_cmu_get_min_clock;
674 		sdhci_s3c_ops.get_max_clock = sdhci_cmu_get_max_clock;
675 	}
676 
677 	/* It supports additional host capabilities if needed */
678 	if (pdata->host_caps)
679 		host->mmc->caps |= pdata->host_caps;
680 
681 	if (pdata->host_caps2)
682 		host->mmc->caps2 |= pdata->host_caps2;
683 
684 	pm_runtime_enable(&pdev->dev);
685 	pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
686 	pm_runtime_use_autosuspend(&pdev->dev);
687 	pm_suspend_ignore_children(&pdev->dev, 1);
688 
689 	ret = mmc_of_parse(host->mmc);
690 	if (ret)
691 		goto err_req_regs;
692 
693 	ret = sdhci_add_host(host);
694 	if (ret) {
695 		dev_err(dev, "sdhci_add_host() failed\n");
696 		goto err_req_regs;
697 	}
698 
699 #ifdef CONFIG_PM
700 	if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
701 		clk_disable_unprepare(sc->clk_io);
702 #endif
703 	return 0;
704 
705  err_req_regs:
706 	pm_runtime_disable(&pdev->dev);
707 
708  err_no_busclks:
709 	clk_disable_unprepare(sc->clk_io);
710 
711  err_pdata_io_clk:
712 	sdhci_free_host(host);
713 
714 	return ret;
715 }
716 
717 static int sdhci_s3c_remove(struct platform_device *pdev)
718 {
719 	struct sdhci_host *host =  platform_get_drvdata(pdev);
720 	struct sdhci_s3c *sc = sdhci_priv(host);
721 
722 	if (sc->ext_cd_irq)
723 		free_irq(sc->ext_cd_irq, sc);
724 
725 #ifdef CONFIG_PM
726 	if (sc->pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
727 		clk_prepare_enable(sc->clk_io);
728 #endif
729 	sdhci_remove_host(host, 1);
730 
731 	pm_runtime_dont_use_autosuspend(&pdev->dev);
732 	pm_runtime_disable(&pdev->dev);
733 
734 	clk_disable_unprepare(sc->clk_io);
735 
736 	sdhci_free_host(host);
737 
738 	return 0;
739 }
740 
741 #ifdef CONFIG_PM_SLEEP
742 static int sdhci_s3c_suspend(struct device *dev)
743 {
744 	struct sdhci_host *host = dev_get_drvdata(dev);
745 
746 	if (host->tuning_mode != SDHCI_TUNING_MODE_3)
747 		mmc_retune_needed(host->mmc);
748 
749 	return sdhci_suspend_host(host);
750 }
751 
752 static int sdhci_s3c_resume(struct device *dev)
753 {
754 	struct sdhci_host *host = dev_get_drvdata(dev);
755 
756 	return sdhci_resume_host(host);
757 }
758 #endif
759 
760 #ifdef CONFIG_PM
761 static int sdhci_s3c_runtime_suspend(struct device *dev)
762 {
763 	struct sdhci_host *host = dev_get_drvdata(dev);
764 	struct sdhci_s3c *ourhost = to_s3c(host);
765 	struct clk *busclk = ourhost->clk_io;
766 	int ret;
767 
768 	ret = sdhci_runtime_suspend_host(host);
769 
770 	if (host->tuning_mode != SDHCI_TUNING_MODE_3)
771 		mmc_retune_needed(host->mmc);
772 
773 	if (ourhost->cur_clk >= 0)
774 		clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]);
775 	clk_disable_unprepare(busclk);
776 	return ret;
777 }
778 
779 static int sdhci_s3c_runtime_resume(struct device *dev)
780 {
781 	struct sdhci_host *host = dev_get_drvdata(dev);
782 	struct sdhci_s3c *ourhost = to_s3c(host);
783 	struct clk *busclk = ourhost->clk_io;
784 	int ret;
785 
786 	clk_prepare_enable(busclk);
787 	if (ourhost->cur_clk >= 0)
788 		clk_prepare_enable(ourhost->clk_bus[ourhost->cur_clk]);
789 	ret = sdhci_runtime_resume_host(host);
790 	return ret;
791 }
792 #endif
793 
794 static const struct dev_pm_ops sdhci_s3c_pmops = {
795 	SET_SYSTEM_SLEEP_PM_OPS(sdhci_s3c_suspend, sdhci_s3c_resume)
796 	SET_RUNTIME_PM_OPS(sdhci_s3c_runtime_suspend, sdhci_s3c_runtime_resume,
797 			   NULL)
798 };
799 
800 #if defined(CONFIG_CPU_EXYNOS4210) || defined(CONFIG_SOC_EXYNOS4212)
801 static struct sdhci_s3c_drv_data exynos4_sdhci_drv_data = {
802 	.no_divider = true,
803 };
804 #define EXYNOS4_SDHCI_DRV_DATA ((kernel_ulong_t)&exynos4_sdhci_drv_data)
805 #else
806 #define EXYNOS4_SDHCI_DRV_DATA ((kernel_ulong_t)NULL)
807 #endif
808 
809 static const struct platform_device_id sdhci_s3c_driver_ids[] = {
810 	{
811 		.name		= "s3c-sdhci",
812 		.driver_data	= (kernel_ulong_t)NULL,
813 	}, {
814 		.name		= "exynos4-sdhci",
815 		.driver_data	= EXYNOS4_SDHCI_DRV_DATA,
816 	},
817 	{ }
818 };
819 MODULE_DEVICE_TABLE(platform, sdhci_s3c_driver_ids);
820 
821 #ifdef CONFIG_OF
822 static const struct of_device_id sdhci_s3c_dt_match[] = {
823 	{ .compatible = "samsung,s3c6410-sdhci", },
824 	{ .compatible = "samsung,exynos4210-sdhci",
825 		.data = (void *)EXYNOS4_SDHCI_DRV_DATA },
826 	{},
827 };
828 MODULE_DEVICE_TABLE(of, sdhci_s3c_dt_match);
829 #endif
830 
831 static struct platform_driver sdhci_s3c_driver = {
832 	.probe		= sdhci_s3c_probe,
833 	.remove		= sdhci_s3c_remove,
834 	.id_table	= sdhci_s3c_driver_ids,
835 	.driver		= {
836 		.name	= "s3c-sdhci",
837 		.of_match_table = of_match_ptr(sdhci_s3c_dt_match),
838 		.pm	= &sdhci_s3c_pmops,
839 	},
840 };
841 
842 module_platform_driver(sdhci_s3c_driver);
843 
844 MODULE_DESCRIPTION("Samsung SDHCI (HSMMC) glue");
845 MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
846 MODULE_LICENSE("GPL v2");
847 MODULE_ALIAS("platform:s3c-sdhci");
848