xref: /openbmc/linux/drivers/mmc/host/sdhci-s3c.c (revision b593bce5) 
1 // SPDX-License-Identifier: GPL-2.0-only
2 /* linux/drivers/mmc/host/sdhci-s3c.c
3  *
4  * Copyright 2008 Openmoko Inc.
5  * Copyright 2008 Simtec Electronics
6  *      Ben Dooks <ben@simtec.co.uk>
7  *      http://armlinux.simtec.co.uk/
8  *
9  * SDHCI (HSMMC) support for Samsung SoC
10  */
11 
12 #include <linux/spinlock.h>
13 #include <linux/delay.h>
14 #include <linux/dma-mapping.h>
15 #include <linux/platform_device.h>
16 #include <linux/platform_data/mmc-sdhci-s3c.h>
17 #include <linux/slab.h>
18 #include <linux/clk.h>
19 #include <linux/io.h>
20 #include <linux/gpio.h>
21 #include <linux/module.h>
22 #include <linux/of.h>
23 #include <linux/of_gpio.h>
24 #include <linux/pm.h>
25 #include <linux/pm_runtime.h>
26 
27 #include <linux/mmc/host.h>
28 
29 #include "sdhci.h"
30 
31 #define MAX_BUS_CLK	(4)
32 
33 #define S3C_SDHCI_CONTROL2			(0x80)
34 #define S3C_SDHCI_CONTROL3			(0x84)
35 #define S3C64XX_SDHCI_CONTROL4			(0x8C)
36 
37 #define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR	BIT(31)
38 #define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK		BIT(30)
39 #define S3C_SDHCI_CTRL2_CDINVRXD3		BIT(29)
40 #define S3C_SDHCI_CTRL2_SLCARDOUT		BIT(28)
41 
42 #define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK		(0xf << 24)
43 #define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT		(24)
44 #define S3C_SDHCI_CTRL2_FLTCLKSEL(_x)		((_x) << 24)
45 
46 #define S3C_SDHCI_CTRL2_LVLDAT_MASK		(0xff << 16)
47 #define S3C_SDHCI_CTRL2_LVLDAT_SHIFT		(16)
48 #define S3C_SDHCI_CTRL2_LVLDAT(_x)		((_x) << 16)
49 
50 #define S3C_SDHCI_CTRL2_ENFBCLKTX		BIT(15)
51 #define S3C_SDHCI_CTRL2_ENFBCLKRX		BIT(14)
52 #define S3C_SDHCI_CTRL2_SDCDSEL			BIT(13)
53 #define S3C_SDHCI_CTRL2_SDSIGPC			BIT(12)
54 #define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART	BIT(11)
55 
56 #define S3C_SDHCI_CTRL2_DFCNT_MASK		(0x3 << 9)
57 #define S3C_SDHCI_CTRL2_DFCNT_SHIFT		(9)
58 #define S3C_SDHCI_CTRL2_DFCNT_NONE		(0x0 << 9)
59 #define S3C_SDHCI_CTRL2_DFCNT_4SDCLK		(0x1 << 9)
60 #define S3C_SDHCI_CTRL2_DFCNT_16SDCLK		(0x2 << 9)
61 #define S3C_SDHCI_CTRL2_DFCNT_64SDCLK		(0x3 << 9)
62 
63 #define S3C_SDHCI_CTRL2_ENCLKOUTHOLD		BIT(8)
64 #define S3C_SDHCI_CTRL2_RWAITMODE		BIT(7)
65 #define S3C_SDHCI_CTRL2_DISBUFRD		BIT(6)
66 
67 #define S3C_SDHCI_CTRL2_SELBASECLK_MASK		(0x3 << 4)
68 #define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT	(4)
69 #define S3C_SDHCI_CTRL2_PWRSYNC			BIT(3)
70 #define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON		BIT(1)
71 #define S3C_SDHCI_CTRL2_HWINITFIN		BIT(0)
72 
73 #define S3C_SDHCI_CTRL3_FCSEL3			BIT(31)
74 #define S3C_SDHCI_CTRL3_FCSEL2			BIT(23)
75 #define S3C_SDHCI_CTRL3_FCSEL1			BIT(15)
76 #define S3C_SDHCI_CTRL3_FCSEL0			BIT(7)
77 
78 #define S3C_SDHCI_CTRL3_FIA3_MASK		(0x7f << 24)
79 #define S3C_SDHCI_CTRL3_FIA3_SHIFT		(24)
80 #define S3C_SDHCI_CTRL3_FIA3(_x)		((_x) << 24)
81 
82 #define S3C_SDHCI_CTRL3_FIA2_MASK		(0x7f << 16)
83 #define S3C_SDHCI_CTRL3_FIA2_SHIFT		(16)
84 #define S3C_SDHCI_CTRL3_FIA2(_x)		((_x) << 16)
85 
86 #define S3C_SDHCI_CTRL3_FIA1_MASK		(0x7f << 8)
87 #define S3C_SDHCI_CTRL3_FIA1_SHIFT		(8)
88 #define S3C_SDHCI_CTRL3_FIA1(_x)		((_x) << 8)
89 
90 #define S3C_SDHCI_CTRL3_FIA0_MASK		(0x7f << 0)
91 #define S3C_SDHCI_CTRL3_FIA0_SHIFT		(0)
92 #define S3C_SDHCI_CTRL3_FIA0(_x)		((_x) << 0)
93 
94 #define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK	(0x3 << 16)
95 #define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT	(16)
96 #define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA	(0x0 << 16)
97 #define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA	(0x1 << 16)
98 #define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA	(0x2 << 16)
99 #define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA	(0x3 << 16)
100 
101 #define S3C64XX_SDHCI_CONTROL4_BUSY		(1)
102 
103 /**
104  * struct sdhci_s3c - S3C SDHCI instance
105  * @host: The SDHCI host created
106  * @pdev: The platform device we where created from.
107  * @ioarea: The resource created when we claimed the IO area.
108  * @pdata: The platform data for this controller.
109  * @cur_clk: The index of the current bus clock.
110  * @clk_io: The clock for the internal bus interface.
111  * @clk_bus: The clocks that are available for the SD/MMC bus clock.
112  */
113 struct sdhci_s3c {
114 	struct sdhci_host	*host;
115 	struct platform_device	*pdev;
116 	struct resource		*ioarea;
117 	struct s3c_sdhci_platdata *pdata;
118 	int			cur_clk;
119 	int			ext_cd_irq;
120 	int			ext_cd_gpio;
121 
122 	struct clk		*clk_io;
123 	struct clk		*clk_bus[MAX_BUS_CLK];
124 	unsigned long		clk_rates[MAX_BUS_CLK];
125 
126 	bool			no_divider;
127 };
128 
129 /**
130  * struct sdhci_s3c_driver_data - S3C SDHCI platform specific driver data
131  * @sdhci_quirks: sdhci host specific quirks.
132  *
133  * Specifies platform specific configuration of sdhci controller.
134  * Note: A structure for driver specific platform data is used for future
135  * expansion of its usage.
136  */
137 struct sdhci_s3c_drv_data {
138 	unsigned int	sdhci_quirks;
139 	bool		no_divider;
140 };
141 
142 static inline struct sdhci_s3c *to_s3c(struct sdhci_host *host)
143 {
144 	return sdhci_priv(host);
145 }
146 
147 /**
148  * sdhci_s3c_get_max_clk - callback to get maximum clock frequency.
149  * @host: The SDHCI host instance.
150  *
151  * Callback to return the maximum clock rate acheivable by the controller.
152 */
153 static unsigned int sdhci_s3c_get_max_clk(struct sdhci_host *host)
154 {
155 	struct sdhci_s3c *ourhost = to_s3c(host);
156 	unsigned long rate, max = 0;
157 	int src;
158 
159 	for (src = 0; src < MAX_BUS_CLK; src++) {
160 		rate = ourhost->clk_rates[src];
161 		if (rate > max)
162 			max = rate;
163 	}
164 
165 	return max;
166 }
167 
168 /**
169  * sdhci_s3c_consider_clock - consider one the bus clocks for current setting
170  * @ourhost: Our SDHCI instance.
171  * @src: The source clock index.
172  * @wanted: The clock frequency wanted.
173  */
174 static unsigned int sdhci_s3c_consider_clock(struct sdhci_s3c *ourhost,
175 					     unsigned int src,
176 					     unsigned int wanted)
177 {
178 	unsigned long rate;
179 	struct clk *clksrc = ourhost->clk_bus[src];
180 	int shift;
181 
182 	if (IS_ERR(clksrc))
183 		return UINT_MAX;
184 
185 	/*
186 	 * If controller uses a non-standard clock division, find the best clock
187 	 * speed possible with selected clock source and skip the division.
188 	 */
189 	if (ourhost->no_divider) {
190 		rate = clk_round_rate(clksrc, wanted);
191 		return wanted - rate;
192 	}
193 
194 	rate = ourhost->clk_rates[src];
195 
196 	for (shift = 0; shift <= 8; ++shift) {
197 		if ((rate >> shift) <= wanted)
198 			break;
199 	}
200 
201 	if (shift > 8) {
202 		dev_dbg(&ourhost->pdev->dev,
203 			"clk %d: rate %ld, min rate %lu > wanted %u\n",
204 			src, rate, rate / 256, wanted);
205 		return UINT_MAX;
206 	}
207 
208 	dev_dbg(&ourhost->pdev->dev, "clk %d: rate %ld, want %d, got %ld\n",
209 		src, rate, wanted, rate >> shift);
210 
211 	return wanted - (rate >> shift);
212 }
213 
214 /**
215  * sdhci_s3c_set_clock - callback on clock change
216  * @host: The SDHCI host being changed
217  * @clock: The clock rate being requested.
218  *
219  * When the card's clock is going to be changed, look at the new frequency
220  * and find the best clock source to go with it.
221 */
222 static void sdhci_s3c_set_clock(struct sdhci_host *host, unsigned int clock)
223 {
224 	struct sdhci_s3c *ourhost = to_s3c(host);
225 	unsigned int best = UINT_MAX;
226 	unsigned int delta;
227 	int best_src = 0;
228 	int src;
229 	u32 ctrl;
230 
231 	host->mmc->actual_clock = 0;
232 
233 	/* don't bother if the clock is going off. */
234 	if (clock == 0) {
235 		sdhci_set_clock(host, clock);
236 		return;
237 	}
238 
239 	for (src = 0; src < MAX_BUS_CLK; src++) {
240 		delta = sdhci_s3c_consider_clock(ourhost, src, clock);
241 		if (delta < best) {
242 			best = delta;
243 			best_src = src;
244 		}
245 	}
246 
247 	dev_dbg(&ourhost->pdev->dev,
248 		"selected source %d, clock %d, delta %d\n",
249 		 best_src, clock, best);
250 
251 	/* select the new clock source */
252 	if (ourhost->cur_clk != best_src) {
253 		struct clk *clk = ourhost->clk_bus[best_src];
254 
255 		clk_prepare_enable(clk);
256 		if (ourhost->cur_clk >= 0)
257 			clk_disable_unprepare(
258 					ourhost->clk_bus[ourhost->cur_clk]);
259 
260 		ourhost->cur_clk = best_src;
261 		host->max_clk = ourhost->clk_rates[best_src];
262 	}
263 
264 	/* turn clock off to card before changing clock source */
265 	writew(0, host->ioaddr + SDHCI_CLOCK_CONTROL);
266 
267 	ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
268 	ctrl &= ~S3C_SDHCI_CTRL2_SELBASECLK_MASK;
269 	ctrl |= best_src << S3C_SDHCI_CTRL2_SELBASECLK_SHIFT;
270 	writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
271 
272 	/* reprogram default hardware configuration */
273 	writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA,
274 		host->ioaddr + S3C64XX_SDHCI_CONTROL4);
275 
276 	ctrl = readl(host->ioaddr + S3C_SDHCI_CONTROL2);
277 	ctrl |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR |
278 		  S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK |
279 		  S3C_SDHCI_CTRL2_ENFBCLKRX |
280 		  S3C_SDHCI_CTRL2_DFCNT_NONE |
281 		  S3C_SDHCI_CTRL2_ENCLKOUTHOLD);
282 	writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL2);
283 
284 	/* reconfigure the controller for new clock rate */
285 	ctrl = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0);
286 	if (clock < 25 * 1000000)
287 		ctrl |= (S3C_SDHCI_CTRL3_FCSEL3 | S3C_SDHCI_CTRL3_FCSEL2);
288 	writel(ctrl, host->ioaddr + S3C_SDHCI_CONTROL3);
289 
290 	sdhci_set_clock(host, clock);
291 }
292 
293 /**
294  * sdhci_s3c_get_min_clock - callback to get minimal supported clock value
295  * @host: The SDHCI host being queried
296  *
297  * To init mmc host properly a minimal clock value is needed. For high system
298  * bus clock's values the standard formula gives values out of allowed range.
299  * The clock still can be set to lower values, if clock source other then
300  * system bus is selected.
301 */
302 static unsigned int sdhci_s3c_get_min_clock(struct sdhci_host *host)
303 {
304 	struct sdhci_s3c *ourhost = to_s3c(host);
305 	unsigned long rate, min = ULONG_MAX;
306 	int src;
307 
308 	for (src = 0; src < MAX_BUS_CLK; src++) {
309 		rate = ourhost->clk_rates[src] / 256;
310 		if (!rate)
311 			continue;
312 		if (rate < min)
313 			min = rate;
314 	}
315 
316 	return min;
317 }
318 
319 /* sdhci_cmu_get_max_clk - callback to get maximum clock frequency.*/
320 static unsigned int sdhci_cmu_get_max_clock(struct sdhci_host *host)
321 {
322 	struct sdhci_s3c *ourhost = to_s3c(host);
323 	unsigned long rate, max = 0;
324 	int src;
325 
326 	for (src = 0; src < MAX_BUS_CLK; src++) {
327 		struct clk *clk;
328 
329 		clk = ourhost->clk_bus[src];
330 		if (IS_ERR(clk))
331 			continue;
332 
333 		rate = clk_round_rate(clk, ULONG_MAX);
334 		if (rate > max)
335 			max = rate;
336 	}
337 
338 	return max;
339 }
340 
341 /* sdhci_cmu_get_min_clock - callback to get minimal supported clock value. */
342 static unsigned int sdhci_cmu_get_min_clock(struct sdhci_host *host)
343 {
344 	struct sdhci_s3c *ourhost = to_s3c(host);
345 	unsigned long rate, min = ULONG_MAX;
346 	int src;
347 
348 	for (src = 0; src < MAX_BUS_CLK; src++) {
349 		struct clk *clk;
350 
351 		clk = ourhost->clk_bus[src];
352 		if (IS_ERR(clk))
353 			continue;
354 
355 		rate = clk_round_rate(clk, 0);
356 		if (rate < min)
357 			min = rate;
358 	}
359 
360 	return min;
361 }
362 
363 /* sdhci_cmu_set_clock - callback on clock change.*/
364 static void sdhci_cmu_set_clock(struct sdhci_host *host, unsigned int clock)
365 {
366 	struct sdhci_s3c *ourhost = to_s3c(host);
367 	struct device *dev = &ourhost->pdev->dev;
368 	unsigned long timeout;
369 	u16 clk = 0;
370 	int ret;
371 
372 	host->mmc->actual_clock = 0;
373 
374 	/* If the clock is going off, set to 0 at clock control register */
375 	if (clock == 0) {
376 		sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
377 		return;
378 	}
379 
380 	sdhci_s3c_set_clock(host, clock);
381 
382 	/* Reset SD Clock Enable */
383 	clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
384 	clk &= ~SDHCI_CLOCK_CARD_EN;
385 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
386 
387 	ret = clk_set_rate(ourhost->clk_bus[ourhost->cur_clk], clock);
388 	if (ret != 0) {
389 		dev_err(dev, "%s: failed to set clock rate %uHz\n",
390 			mmc_hostname(host->mmc), clock);
391 		return;
392 	}
393 
394 	clk = SDHCI_CLOCK_INT_EN;
395 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
396 
397 	/* Wait max 20 ms */
398 	timeout = 20;
399 	while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
400 		& SDHCI_CLOCK_INT_STABLE)) {
401 		if (timeout == 0) {
402 			dev_err(dev, "%s: Internal clock never stabilised.\n",
403 				mmc_hostname(host->mmc));
404 			return;
405 		}
406 		timeout--;
407 		mdelay(1);
408 	}
409 
410 	clk |= SDHCI_CLOCK_CARD_EN;
411 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
412 }
413 
414 static struct sdhci_ops sdhci_s3c_ops = {
415 	.get_max_clock		= sdhci_s3c_get_max_clk,
416 	.set_clock		= sdhci_s3c_set_clock,
417 	.get_min_clock		= sdhci_s3c_get_min_clock,
418 	.set_bus_width		= sdhci_set_bus_width,
419 	.reset			= sdhci_reset,
420 	.set_uhs_signaling	= sdhci_set_uhs_signaling,
421 };
422 
423 #ifdef CONFIG_OF
424 static int sdhci_s3c_parse_dt(struct device *dev,
425 		struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
426 {
427 	struct device_node *node = dev->of_node;
428 	u32 max_width;
429 
430 	/* if the bus-width property is not specified, assume width as 1 */
431 	if (of_property_read_u32(node, "bus-width", &max_width))
432 		max_width = 1;
433 	pdata->max_width = max_width;
434 
435 	/* get the card detection method */
436 	if (of_get_property(node, "broken-cd", NULL)) {
437 		pdata->cd_type = S3C_SDHCI_CD_NONE;
438 		return 0;
439 	}
440 
441 	if (of_get_property(node, "non-removable", NULL)) {
442 		pdata->cd_type = S3C_SDHCI_CD_PERMANENT;
443 		return 0;
444 	}
445 
446 	if (of_get_named_gpio(node, "cd-gpios", 0))
447 		return 0;
448 
449 	/* assuming internal card detect that will be configured by pinctrl */
450 	pdata->cd_type = S3C_SDHCI_CD_INTERNAL;
451 	return 0;
452 }
453 #else
454 static int sdhci_s3c_parse_dt(struct device *dev,
455 		struct sdhci_host *host, struct s3c_sdhci_platdata *pdata)
456 {
457 	return -EINVAL;
458 }
459 #endif
460 
461 static const struct of_device_id sdhci_s3c_dt_match[];
462 
463 static inline struct sdhci_s3c_drv_data *sdhci_s3c_get_driver_data(
464 			struct platform_device *pdev)
465 {
466 #ifdef CONFIG_OF
467 	if (pdev->dev.of_node) {
468 		const struct of_device_id *match;
469 		match = of_match_node(sdhci_s3c_dt_match, pdev->dev.of_node);
470 		return (struct sdhci_s3c_drv_data *)match->data;
471 	}
472 #endif
473 	return (struct sdhci_s3c_drv_data *)
474 			platform_get_device_id(pdev)->driver_data;
475 }
476 
477 static int sdhci_s3c_probe(struct platform_device *pdev)
478 {
479 	struct s3c_sdhci_platdata *pdata;
480 	struct sdhci_s3c_drv_data *drv_data;
481 	struct device *dev = &pdev->dev;
482 	struct sdhci_host *host;
483 	struct sdhci_s3c *sc;
484 	struct resource *res;
485 	int ret, irq, ptr, clks;
486 
487 	if (!pdev->dev.platform_data && !pdev->dev.of_node) {
488 		dev_err(dev, "no device data specified\n");
489 		return -ENOENT;
490 	}
491 
492 	irq = platform_get_irq(pdev, 0);
493 	if (irq < 0) {
494 		dev_err(dev, "no irq specified\n");
495 		return irq;
496 	}
497 
498 	host = sdhci_alloc_host(dev, sizeof(struct sdhci_s3c));
499 	if (IS_ERR(host)) {
500 		dev_err(dev, "sdhci_alloc_host() failed\n");
501 		return PTR_ERR(host);
502 	}
503 	sc = sdhci_priv(host);
504 
505 	pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
506 	if (!pdata) {
507 		ret = -ENOMEM;
508 		goto err_pdata_io_clk;
509 	}
510 
511 	if (pdev->dev.of_node) {
512 		ret = sdhci_s3c_parse_dt(&pdev->dev, host, pdata);
513 		if (ret)
514 			goto err_pdata_io_clk;
515 	} else {
516 		memcpy(pdata, pdev->dev.platform_data, sizeof(*pdata));
517 		sc->ext_cd_gpio = -1; /* invalid gpio number */
518 	}
519 
520 	drv_data = sdhci_s3c_get_driver_data(pdev);
521 
522 	sc->host = host;
523 	sc->pdev = pdev;
524 	sc->pdata = pdata;
525 	sc->cur_clk = -1;
526 
527 	platform_set_drvdata(pdev, host);
528 
529 	sc->clk_io = devm_clk_get(dev, "hsmmc");
530 	if (IS_ERR(sc->clk_io)) {
531 		dev_err(dev, "failed to get io clock\n");
532 		ret = PTR_ERR(sc->clk_io);
533 		goto err_pdata_io_clk;
534 	}
535 
536 	/* enable the local io clock and keep it running for the moment. */
537 	clk_prepare_enable(sc->clk_io);
538 
539 	for (clks = 0, ptr = 0; ptr < MAX_BUS_CLK; ptr++) {
540 		char name[14];
541 
542 		snprintf(name, 14, "mmc_busclk.%d", ptr);
543 		sc->clk_bus[ptr] = devm_clk_get(dev, name);
544 		if (IS_ERR(sc->clk_bus[ptr]))
545 			continue;
546 
547 		clks++;
548 		sc->clk_rates[ptr] = clk_get_rate(sc->clk_bus[ptr]);
549 
550 		dev_info(dev, "clock source %d: %s (%ld Hz)\n",
551 				ptr, name, sc->clk_rates[ptr]);
552 	}
553 
554 	if (clks == 0) {
555 		dev_err(dev, "failed to find any bus clocks\n");
556 		ret = -ENOENT;
557 		goto err_no_busclks;
558 	}
559 
560 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
561 	host->ioaddr = devm_ioremap_resource(&pdev->dev, res);
562 	if (IS_ERR(host->ioaddr)) {
563 		ret = PTR_ERR(host->ioaddr);
564 		goto err_req_regs;
565 	}
566 
567 	/* Ensure we have minimal gpio selected CMD/CLK/Detect */
568 	if (pdata->cfg_gpio)
569 		pdata->cfg_gpio(pdev, pdata->max_width);
570 
571 	host->hw_name = "samsung-hsmmc";
572 	host->ops = &sdhci_s3c_ops;
573 	host->quirks = 0;
574 	host->quirks2 = 0;
575 	host->irq = irq;
576 
577 	/* Setup quirks for the controller */
578 	host->quirks |= SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC;
579 	host->quirks |= SDHCI_QUIRK_NO_HISPD_BIT;
580 	if (drv_data) {
581 		host->quirks |= drv_data->sdhci_quirks;
582 		sc->no_divider = drv_data->no_divider;
583 	}
584 
585 #ifndef CONFIG_MMC_SDHCI_S3C_DMA
586 
587 	/* we currently see overruns on errors, so disable the SDMA
588 	 * support as well. */
589 	host->quirks |= SDHCI_QUIRK_BROKEN_DMA;
590 
591 #endif /* CONFIG_MMC_SDHCI_S3C_DMA */
592 
593 	/* It seems we do not get an DATA transfer complete on non-busy
594 	 * transfers, not sure if this is a problem with this specific
595 	 * SDHCI block, or a missing configuration that needs to be set. */
596 	host->quirks |= SDHCI_QUIRK_NO_BUSY_IRQ;
597 
598 	/* This host supports the Auto CMD12 */
599 	host->quirks |= SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12;
600 
601 	/* Samsung SoCs need BROKEN_ADMA_ZEROLEN_DESC */
602 	host->quirks |= SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC;
603 
604 	if (pdata->cd_type == S3C_SDHCI_CD_NONE ||
605 	    pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
606 		host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION;
607 
608 	if (pdata->cd_type == S3C_SDHCI_CD_PERMANENT)
609 		host->mmc->caps = MMC_CAP_NONREMOVABLE;
610 
611 	switch (pdata->max_width) {
612 	case 8:
613 		host->mmc->caps |= MMC_CAP_8_BIT_DATA;
614 	case 4:
615 		host->mmc->caps |= MMC_CAP_4_BIT_DATA;
616 		break;
617 	}
618 
619 	if (pdata->pm_caps)
620 		host->mmc->pm_caps |= pdata->pm_caps;
621 
622 	host->quirks |= (SDHCI_QUIRK_32BIT_DMA_ADDR |
623 			 SDHCI_QUIRK_32BIT_DMA_SIZE);
624 
625 	/* HSMMC on Samsung SoCs uses SDCLK as timeout clock */
626 	host->quirks |= SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK;
627 
628 	/*
629 	 * If controller does not have internal clock divider,
630 	 * we can use overriding functions instead of default.
631 	 */
632 	if (sc->no_divider) {
633 		sdhci_s3c_ops.set_clock = sdhci_cmu_set_clock;
634 		sdhci_s3c_ops.get_min_clock = sdhci_cmu_get_min_clock;
635 		sdhci_s3c_ops.get_max_clock = sdhci_cmu_get_max_clock;
636 	}
637 
638 	/* It supports additional host capabilities if needed */
639 	if (pdata->host_caps)
640 		host->mmc->caps |= pdata->host_caps;
641 
642 	if (pdata->host_caps2)
643 		host->mmc->caps2 |= pdata->host_caps2;
644 
645 	pm_runtime_enable(&pdev->dev);
646 	pm_runtime_set_autosuspend_delay(&pdev->dev, 50);
647 	pm_runtime_use_autosuspend(&pdev->dev);
648 	pm_suspend_ignore_children(&pdev->dev, 1);
649 
650 	ret = mmc_of_parse(host->mmc);
651 	if (ret)
652 		goto err_req_regs;
653 
654 	ret = sdhci_add_host(host);
655 	if (ret)
656 		goto err_req_regs;
657 
658 #ifdef CONFIG_PM
659 	if (pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
660 		clk_disable_unprepare(sc->clk_io);
661 #endif
662 	return 0;
663 
664  err_req_regs:
665 	pm_runtime_disable(&pdev->dev);
666 
667  err_no_busclks:
668 	clk_disable_unprepare(sc->clk_io);
669 
670  err_pdata_io_clk:
671 	sdhci_free_host(host);
672 
673 	return ret;
674 }
675 
676 static int sdhci_s3c_remove(struct platform_device *pdev)
677 {
678 	struct sdhci_host *host =  platform_get_drvdata(pdev);
679 	struct sdhci_s3c *sc = sdhci_priv(host);
680 
681 	if (sc->ext_cd_irq)
682 		free_irq(sc->ext_cd_irq, sc);
683 
684 #ifdef CONFIG_PM
685 	if (sc->pdata->cd_type != S3C_SDHCI_CD_INTERNAL)
686 		clk_prepare_enable(sc->clk_io);
687 #endif
688 	sdhci_remove_host(host, 1);
689 
690 	pm_runtime_dont_use_autosuspend(&pdev->dev);
691 	pm_runtime_disable(&pdev->dev);
692 
693 	clk_disable_unprepare(sc->clk_io);
694 
695 	sdhci_free_host(host);
696 
697 	return 0;
698 }
699 
700 #ifdef CONFIG_PM_SLEEP
701 static int sdhci_s3c_suspend(struct device *dev)
702 {
703 	struct sdhci_host *host = dev_get_drvdata(dev);
704 
705 	if (host->tuning_mode != SDHCI_TUNING_MODE_3)
706 		mmc_retune_needed(host->mmc);
707 
708 	return sdhci_suspend_host(host);
709 }
710 
711 static int sdhci_s3c_resume(struct device *dev)
712 {
713 	struct sdhci_host *host = dev_get_drvdata(dev);
714 
715 	return sdhci_resume_host(host);
716 }
717 #endif
718 
719 #ifdef CONFIG_PM
720 static int sdhci_s3c_runtime_suspend(struct device *dev)
721 {
722 	struct sdhci_host *host = dev_get_drvdata(dev);
723 	struct sdhci_s3c *ourhost = to_s3c(host);
724 	struct clk *busclk = ourhost->clk_io;
725 	int ret;
726 
727 	ret = sdhci_runtime_suspend_host(host);
728 
729 	if (host->tuning_mode != SDHCI_TUNING_MODE_3)
730 		mmc_retune_needed(host->mmc);
731 
732 	if (ourhost->cur_clk >= 0)
733 		clk_disable_unprepare(ourhost->clk_bus[ourhost->cur_clk]);
734 	clk_disable_unprepare(busclk);
735 	return ret;
736 }
737 
738 static int sdhci_s3c_runtime_resume(struct device *dev)
739 {
740 	struct sdhci_host *host = dev_get_drvdata(dev);
741 	struct sdhci_s3c *ourhost = to_s3c(host);
742 	struct clk *busclk = ourhost->clk_io;
743 	int ret;
744 
745 	clk_prepare_enable(busclk);
746 	if (ourhost->cur_clk >= 0)
747 		clk_prepare_enable(ourhost->clk_bus[ourhost->cur_clk]);
748 	ret = sdhci_runtime_resume_host(host);
749 	return ret;
750 }
751 #endif
752 
753 static const struct dev_pm_ops sdhci_s3c_pmops = {
754 	SET_SYSTEM_SLEEP_PM_OPS(sdhci_s3c_suspend, sdhci_s3c_resume)
755 	SET_RUNTIME_PM_OPS(sdhci_s3c_runtime_suspend, sdhci_s3c_runtime_resume,
756 			   NULL)
757 };
758 
759 static const struct platform_device_id sdhci_s3c_driver_ids[] = {
760 	{
761 		.name		= "s3c-sdhci",
762 		.driver_data	= (kernel_ulong_t)NULL,
763 	},
764 	{ }
765 };
766 MODULE_DEVICE_TABLE(platform, sdhci_s3c_driver_ids);
767 
768 #ifdef CONFIG_OF
769 static struct sdhci_s3c_drv_data exynos4_sdhci_drv_data = {
770 	.no_divider = true,
771 };
772 
773 static const struct of_device_id sdhci_s3c_dt_match[] = {
774 	{ .compatible = "samsung,s3c6410-sdhci", },
775 	{ .compatible = "samsung,exynos4210-sdhci",
776 		.data = &exynos4_sdhci_drv_data },
777 	{},
778 };
779 MODULE_DEVICE_TABLE(of, sdhci_s3c_dt_match);
780 #endif
781 
782 static struct platform_driver sdhci_s3c_driver = {
783 	.probe		= sdhci_s3c_probe,
784 	.remove		= sdhci_s3c_remove,
785 	.id_table	= sdhci_s3c_driver_ids,
786 	.driver		= {
787 		.name	= "s3c-sdhci",
788 		.of_match_table = of_match_ptr(sdhci_s3c_dt_match),
789 		.pm	= &sdhci_s3c_pmops,
790 	},
791 };
792 
793 module_platform_driver(sdhci_s3c_driver);
794 
795 MODULE_DESCRIPTION("Samsung SDHCI (HSMMC) glue");
796 MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
797 MODULE_LICENSE("GPL v2");
798 MODULE_ALIAS("platform:s3c-sdhci");
799