1 /* 2 * Copyright (C) 2010 Marvell International Ltd. 3 * Zhangfei Gao <zhangfei.gao@marvell.com> 4 * Kevin Wang <dwang4@marvell.com> 5 * Mingwei Wang <mwwang@marvell.com> 6 * Philip Rakity <prakity@marvell.com> 7 * Mark Brown <markb@marvell.com> 8 * 9 * This software is licensed under the terms of the GNU General Public 10 * License version 2, as published by the Free Software Foundation, and 11 * may be copied, distributed, and modified under those terms. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 */ 19 #include <linux/err.h> 20 #include <linux/init.h> 21 #include <linux/platform_device.h> 22 #include <linux/clk.h> 23 #include <linux/io.h> 24 #include <linux/gpio.h> 25 #include <linux/mmc/card.h> 26 #include <linux/mmc/host.h> 27 #include <linux/mmc/slot-gpio.h> 28 #include <linux/platform_data/pxa_sdhci.h> 29 #include <linux/slab.h> 30 #include <linux/delay.h> 31 #include <linux/module.h> 32 #include <linux/of.h> 33 #include <linux/of_device.h> 34 #include <linux/of_gpio.h> 35 #include <linux/pm.h> 36 #include <linux/pm_runtime.h> 37 #include <linux/mbus.h> 38 39 #include "sdhci.h" 40 #include "sdhci-pltfm.h" 41 42 #define PXAV3_RPM_DELAY_MS 50 43 44 #define SD_CLOCK_BURST_SIZE_SETUP 0x10A 45 #define SDCLK_SEL 0x100 46 #define SDCLK_DELAY_SHIFT 9 47 #define SDCLK_DELAY_MASK 0x1f 48 49 #define SD_CFG_FIFO_PARAM 0x100 50 #define SDCFG_GEN_PAD_CLK_ON (1<<6) 51 #define SDCFG_GEN_PAD_CLK_CNT_MASK 0xFF 52 #define SDCFG_GEN_PAD_CLK_CNT_SHIFT 24 53 54 #define SD_SPI_MODE 0x108 55 #define SD_CE_ATA_1 0x10C 56 57 #define SD_CE_ATA_2 0x10E 58 #define SDCE_MISC_INT (1<<2) 59 #define SDCE_MISC_INT_EN (1<<1) 60 61 struct sdhci_pxa { 62 struct clk *clk_core; 63 struct clk *clk_io; 64 u8 power_mode; 65 void __iomem *sdio3_conf_reg; 66 }; 67 68 /* 69 * These registers are relative to the second register region, for the 70 * MBus bridge. 71 */ 72 #define SDHCI_WINDOW_CTRL(i) (0x80 + ((i) << 3)) 73 #define SDHCI_WINDOW_BASE(i) (0x84 + ((i) << 3)) 74 #define SDHCI_MAX_WIN_NUM 8 75 76 /* 77 * Fields below belong to SDIO3 Configuration Register (third register 78 * region for the Armada 38x flavor) 79 */ 80 81 #define SDIO3_CONF_CLK_INV BIT(0) 82 #define SDIO3_CONF_SD_FB_CLK BIT(2) 83 84 static int mv_conf_mbus_windows(struct platform_device *pdev, 85 const struct mbus_dram_target_info *dram) 86 { 87 int i; 88 void __iomem *regs; 89 struct resource *res; 90 91 if (!dram) { 92 dev_err(&pdev->dev, "no mbus dram info\n"); 93 return -EINVAL; 94 } 95 96 res = platform_get_resource(pdev, IORESOURCE_MEM, 1); 97 if (!res) { 98 dev_err(&pdev->dev, "cannot get mbus registers\n"); 99 return -EINVAL; 100 } 101 102 regs = ioremap(res->start, resource_size(res)); 103 if (!regs) { 104 dev_err(&pdev->dev, "cannot map mbus registers\n"); 105 return -ENOMEM; 106 } 107 108 for (i = 0; i < SDHCI_MAX_WIN_NUM; i++) { 109 writel(0, regs + SDHCI_WINDOW_CTRL(i)); 110 writel(0, regs + SDHCI_WINDOW_BASE(i)); 111 } 112 113 for (i = 0; i < dram->num_cs; i++) { 114 const struct mbus_dram_window *cs = dram->cs + i; 115 116 /* Write size, attributes and target id to control register */ 117 writel(((cs->size - 1) & 0xffff0000) | 118 (cs->mbus_attr << 8) | 119 (dram->mbus_dram_target_id << 4) | 1, 120 regs + SDHCI_WINDOW_CTRL(i)); 121 /* Write base address to base register */ 122 writel(cs->base, regs + SDHCI_WINDOW_BASE(i)); 123 } 124 125 iounmap(regs); 126 127 return 0; 128 } 129 130 static int armada_38x_quirks(struct platform_device *pdev, 131 struct sdhci_host *host) 132 { 133 struct device_node *np = pdev->dev.of_node; 134 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 135 struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host); 136 struct resource *res; 137 138 host->quirks &= ~SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN; 139 host->quirks |= SDHCI_QUIRK_MISSING_CAPS; 140 141 host->caps = sdhci_readl(host, SDHCI_CAPABILITIES); 142 host->caps1 = sdhci_readl(host, SDHCI_CAPABILITIES_1); 143 144 res = platform_get_resource_byname(pdev, IORESOURCE_MEM, 145 "conf-sdio3"); 146 if (res) { 147 pxa->sdio3_conf_reg = devm_ioremap_resource(&pdev->dev, res); 148 if (IS_ERR(pxa->sdio3_conf_reg)) 149 return PTR_ERR(pxa->sdio3_conf_reg); 150 } else { 151 /* 152 * According to erratum 'FE-2946959' both SDR50 and DDR50 153 * modes require specific clock adjustments in SDIO3 154 * Configuration register, if the adjustment is not done, 155 * remove them from the capabilities. 156 */ 157 host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_DDR50); 158 159 dev_warn(&pdev->dev, "conf-sdio3 register not found: disabling SDR50 and DDR50 modes.\nConsider updating your dtb\n"); 160 } 161 162 /* 163 * According to erratum 'ERR-7878951' Armada 38x SDHCI 164 * controller has different capabilities than the ones shown 165 * in its registers 166 */ 167 if (of_property_read_bool(np, "no-1-8-v")) { 168 host->caps &= ~SDHCI_CAN_VDD_180; 169 host->mmc->caps &= ~MMC_CAP_1_8V_DDR; 170 } else { 171 host->caps &= ~SDHCI_CAN_VDD_330; 172 } 173 host->caps1 &= ~(SDHCI_SUPPORT_SDR104 | SDHCI_USE_SDR50_TUNING); 174 175 return 0; 176 } 177 178 static void pxav3_reset(struct sdhci_host *host, u8 mask) 179 { 180 struct platform_device *pdev = to_platform_device(mmc_dev(host->mmc)); 181 struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; 182 183 sdhci_reset(host, mask); 184 185 if (mask == SDHCI_RESET_ALL) { 186 /* 187 * tune timing of read data/command when crc error happen 188 * no performance impact 189 */ 190 if (pdata && 0 != pdata->clk_delay_cycles) { 191 u16 tmp; 192 193 tmp = readw(host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP); 194 tmp |= (pdata->clk_delay_cycles & SDCLK_DELAY_MASK) 195 << SDCLK_DELAY_SHIFT; 196 tmp |= SDCLK_SEL; 197 writew(tmp, host->ioaddr + SD_CLOCK_BURST_SIZE_SETUP); 198 } 199 } 200 } 201 202 #define MAX_WAIT_COUNT 5 203 static void pxav3_gen_init_74_clocks(struct sdhci_host *host, u8 power_mode) 204 { 205 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 206 struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host); 207 u16 tmp; 208 int count; 209 210 if (pxa->power_mode == MMC_POWER_UP 211 && power_mode == MMC_POWER_ON) { 212 213 dev_dbg(mmc_dev(host->mmc), 214 "%s: slot->power_mode = %d," 215 "ios->power_mode = %d\n", 216 __func__, 217 pxa->power_mode, 218 power_mode); 219 220 /* set we want notice of when 74 clocks are sent */ 221 tmp = readw(host->ioaddr + SD_CE_ATA_2); 222 tmp |= SDCE_MISC_INT_EN; 223 writew(tmp, host->ioaddr + SD_CE_ATA_2); 224 225 /* start sending the 74 clocks */ 226 tmp = readw(host->ioaddr + SD_CFG_FIFO_PARAM); 227 tmp |= SDCFG_GEN_PAD_CLK_ON; 228 writew(tmp, host->ioaddr + SD_CFG_FIFO_PARAM); 229 230 /* slowest speed is about 100KHz or 10usec per clock */ 231 udelay(740); 232 count = 0; 233 234 while (count++ < MAX_WAIT_COUNT) { 235 if ((readw(host->ioaddr + SD_CE_ATA_2) 236 & SDCE_MISC_INT) == 0) 237 break; 238 udelay(10); 239 } 240 241 if (count == MAX_WAIT_COUNT) 242 dev_warn(mmc_dev(host->mmc), "74 clock interrupt not cleared\n"); 243 244 /* clear the interrupt bit if posted */ 245 tmp = readw(host->ioaddr + SD_CE_ATA_2); 246 tmp |= SDCE_MISC_INT; 247 writew(tmp, host->ioaddr + SD_CE_ATA_2); 248 } 249 pxa->power_mode = power_mode; 250 } 251 252 static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs) 253 { 254 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 255 struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host); 256 u16 ctrl_2; 257 258 /* 259 * Set V18_EN -- UHS modes do not work without this. 260 * does not change signaling voltage 261 */ 262 ctrl_2 = sdhci_readw(host, SDHCI_HOST_CONTROL2); 263 264 /* Select Bus Speed Mode for host */ 265 ctrl_2 &= ~SDHCI_CTRL_UHS_MASK; 266 switch (uhs) { 267 case MMC_TIMING_UHS_SDR12: 268 ctrl_2 |= SDHCI_CTRL_UHS_SDR12; 269 break; 270 case MMC_TIMING_UHS_SDR25: 271 ctrl_2 |= SDHCI_CTRL_UHS_SDR25; 272 break; 273 case MMC_TIMING_UHS_SDR50: 274 ctrl_2 |= SDHCI_CTRL_UHS_SDR50 | SDHCI_CTRL_VDD_180; 275 break; 276 case MMC_TIMING_UHS_SDR104: 277 ctrl_2 |= SDHCI_CTRL_UHS_SDR104 | SDHCI_CTRL_VDD_180; 278 break; 279 case MMC_TIMING_MMC_DDR52: 280 case MMC_TIMING_UHS_DDR50: 281 ctrl_2 |= SDHCI_CTRL_UHS_DDR50 | SDHCI_CTRL_VDD_180; 282 break; 283 } 284 285 /* 286 * Update SDIO3 Configuration register according to erratum 287 * FE-2946959 288 */ 289 if (pxa->sdio3_conf_reg) { 290 u8 reg_val = readb(pxa->sdio3_conf_reg); 291 292 if (uhs == MMC_TIMING_UHS_SDR50 || 293 uhs == MMC_TIMING_UHS_DDR50) { 294 reg_val &= ~SDIO3_CONF_CLK_INV; 295 reg_val |= SDIO3_CONF_SD_FB_CLK; 296 } else if (uhs == MMC_TIMING_MMC_HS) { 297 reg_val &= ~SDIO3_CONF_CLK_INV; 298 reg_val &= ~SDIO3_CONF_SD_FB_CLK; 299 } else { 300 reg_val |= SDIO3_CONF_CLK_INV; 301 reg_val &= ~SDIO3_CONF_SD_FB_CLK; 302 } 303 writeb(reg_val, pxa->sdio3_conf_reg); 304 } 305 306 sdhci_writew(host, ctrl_2, SDHCI_HOST_CONTROL2); 307 dev_dbg(mmc_dev(host->mmc), 308 "%s uhs = %d, ctrl_2 = %04X\n", 309 __func__, uhs, ctrl_2); 310 } 311 312 static void pxav3_set_power(struct sdhci_host *host, unsigned char mode, 313 unsigned short vdd) 314 { 315 struct mmc_host *mmc = host->mmc; 316 u8 pwr = host->pwr; 317 318 sdhci_set_power_noreg(host, mode, vdd); 319 320 if (host->pwr == pwr) 321 return; 322 323 if (host->pwr == 0) 324 vdd = 0; 325 326 if (!IS_ERR(mmc->supply.vmmc)) 327 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd); 328 } 329 330 static const struct sdhci_ops pxav3_sdhci_ops = { 331 .set_clock = sdhci_set_clock, 332 .set_power = pxav3_set_power, 333 .platform_send_init_74_clocks = pxav3_gen_init_74_clocks, 334 .get_max_clock = sdhci_pltfm_clk_get_max_clock, 335 .set_bus_width = sdhci_set_bus_width, 336 .reset = pxav3_reset, 337 .set_uhs_signaling = pxav3_set_uhs_signaling, 338 }; 339 340 static const struct sdhci_pltfm_data sdhci_pxav3_pdata = { 341 .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK 342 | SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC 343 | SDHCI_QUIRK_32BIT_ADMA_SIZE 344 | SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, 345 .ops = &pxav3_sdhci_ops, 346 }; 347 348 #ifdef CONFIG_OF 349 static const struct of_device_id sdhci_pxav3_of_match[] = { 350 { 351 .compatible = "mrvl,pxav3-mmc", 352 }, 353 { 354 .compatible = "marvell,armada-380-sdhci", 355 }, 356 {}, 357 }; 358 MODULE_DEVICE_TABLE(of, sdhci_pxav3_of_match); 359 360 static struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev) 361 { 362 struct sdhci_pxa_platdata *pdata; 363 struct device_node *np = dev->of_node; 364 u32 clk_delay_cycles; 365 366 pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); 367 if (!pdata) 368 return NULL; 369 370 if (!of_property_read_u32(np, "mrvl,clk-delay-cycles", 371 &clk_delay_cycles)) 372 pdata->clk_delay_cycles = clk_delay_cycles; 373 374 return pdata; 375 } 376 #else 377 static inline struct sdhci_pxa_platdata *pxav3_get_mmc_pdata(struct device *dev) 378 { 379 return NULL; 380 } 381 #endif 382 383 static int sdhci_pxav3_probe(struct platform_device *pdev) 384 { 385 struct sdhci_pltfm_host *pltfm_host; 386 struct sdhci_pxa_platdata *pdata = pdev->dev.platform_data; 387 struct device *dev = &pdev->dev; 388 struct device_node *np = pdev->dev.of_node; 389 struct sdhci_host *host = NULL; 390 struct sdhci_pxa *pxa = NULL; 391 const struct of_device_id *match; 392 int ret; 393 394 host = sdhci_pltfm_init(pdev, &sdhci_pxav3_pdata, sizeof(*pxa)); 395 if (IS_ERR(host)) 396 return PTR_ERR(host); 397 398 pltfm_host = sdhci_priv(host); 399 pxa = sdhci_pltfm_priv(pltfm_host); 400 401 pxa->clk_io = devm_clk_get(dev, "io"); 402 if (IS_ERR(pxa->clk_io)) 403 pxa->clk_io = devm_clk_get(dev, NULL); 404 if (IS_ERR(pxa->clk_io)) { 405 dev_err(dev, "failed to get io clock\n"); 406 ret = PTR_ERR(pxa->clk_io); 407 goto err_clk_get; 408 } 409 pltfm_host->clk = pxa->clk_io; 410 clk_prepare_enable(pxa->clk_io); 411 412 pxa->clk_core = devm_clk_get(dev, "core"); 413 if (!IS_ERR(pxa->clk_core)) 414 clk_prepare_enable(pxa->clk_core); 415 416 /* enable 1/8V DDR capable */ 417 host->mmc->caps |= MMC_CAP_1_8V_DDR; 418 419 if (of_device_is_compatible(np, "marvell,armada-380-sdhci")) { 420 ret = armada_38x_quirks(pdev, host); 421 if (ret < 0) 422 goto err_mbus_win; 423 ret = mv_conf_mbus_windows(pdev, mv_mbus_dram_info()); 424 if (ret < 0) 425 goto err_mbus_win; 426 } 427 428 match = of_match_device(of_match_ptr(sdhci_pxav3_of_match), &pdev->dev); 429 if (match) { 430 ret = mmc_of_parse(host->mmc); 431 if (ret) 432 goto err_of_parse; 433 sdhci_get_of_property(pdev); 434 pdata = pxav3_get_mmc_pdata(dev); 435 pdev->dev.platform_data = pdata; 436 } else if (pdata) { 437 /* on-chip device */ 438 if (pdata->flags & PXA_FLAG_CARD_PERMANENT) 439 host->mmc->caps |= MMC_CAP_NONREMOVABLE; 440 441 /* If slot design supports 8 bit data, indicate this to MMC. */ 442 if (pdata->flags & PXA_FLAG_SD_8_BIT_CAPABLE_SLOT) 443 host->mmc->caps |= MMC_CAP_8_BIT_DATA; 444 445 if (pdata->quirks) 446 host->quirks |= pdata->quirks; 447 if (pdata->quirks2) 448 host->quirks2 |= pdata->quirks2; 449 if (pdata->host_caps) 450 host->mmc->caps |= pdata->host_caps; 451 if (pdata->host_caps2) 452 host->mmc->caps2 |= pdata->host_caps2; 453 if (pdata->pm_caps) 454 host->mmc->pm_caps |= pdata->pm_caps; 455 456 if (gpio_is_valid(pdata->ext_cd_gpio)) { 457 ret = mmc_gpio_request_cd(host->mmc, pdata->ext_cd_gpio, 458 0); 459 if (ret) { 460 dev_err(mmc_dev(host->mmc), 461 "failed to allocate card detect gpio\n"); 462 goto err_cd_req; 463 } 464 } 465 } 466 467 pm_runtime_get_noresume(&pdev->dev); 468 pm_runtime_set_active(&pdev->dev); 469 pm_runtime_set_autosuspend_delay(&pdev->dev, PXAV3_RPM_DELAY_MS); 470 pm_runtime_use_autosuspend(&pdev->dev); 471 pm_runtime_enable(&pdev->dev); 472 pm_suspend_ignore_children(&pdev->dev, 1); 473 474 ret = sdhci_add_host(host); 475 if (ret) { 476 dev_err(&pdev->dev, "failed to add host\n"); 477 goto err_add_host; 478 } 479 480 if (host->mmc->pm_caps & MMC_PM_WAKE_SDIO_IRQ) 481 device_init_wakeup(&pdev->dev, 1); 482 483 pm_runtime_put_autosuspend(&pdev->dev); 484 485 return 0; 486 487 err_add_host: 488 pm_runtime_disable(&pdev->dev); 489 pm_runtime_put_noidle(&pdev->dev); 490 err_of_parse: 491 err_cd_req: 492 err_mbus_win: 493 clk_disable_unprepare(pxa->clk_io); 494 clk_disable_unprepare(pxa->clk_core); 495 err_clk_get: 496 sdhci_pltfm_free(pdev); 497 return ret; 498 } 499 500 static int sdhci_pxav3_remove(struct platform_device *pdev) 501 { 502 struct sdhci_host *host = platform_get_drvdata(pdev); 503 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 504 struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host); 505 506 pm_runtime_get_sync(&pdev->dev); 507 pm_runtime_disable(&pdev->dev); 508 pm_runtime_put_noidle(&pdev->dev); 509 510 sdhci_remove_host(host, 1); 511 512 clk_disable_unprepare(pxa->clk_io); 513 clk_disable_unprepare(pxa->clk_core); 514 515 sdhci_pltfm_free(pdev); 516 517 return 0; 518 } 519 520 #ifdef CONFIG_PM_SLEEP 521 static int sdhci_pxav3_suspend(struct device *dev) 522 { 523 int ret; 524 struct sdhci_host *host = dev_get_drvdata(dev); 525 526 pm_runtime_get_sync(dev); 527 if (host->tuning_mode != SDHCI_TUNING_MODE_3) 528 mmc_retune_needed(host->mmc); 529 ret = sdhci_suspend_host(host); 530 pm_runtime_mark_last_busy(dev); 531 pm_runtime_put_autosuspend(dev); 532 533 return ret; 534 } 535 536 static int sdhci_pxav3_resume(struct device *dev) 537 { 538 int ret; 539 struct sdhci_host *host = dev_get_drvdata(dev); 540 541 pm_runtime_get_sync(dev); 542 ret = sdhci_resume_host(host); 543 pm_runtime_mark_last_busy(dev); 544 pm_runtime_put_autosuspend(dev); 545 546 return ret; 547 } 548 #endif 549 550 #ifdef CONFIG_PM 551 static int sdhci_pxav3_runtime_suspend(struct device *dev) 552 { 553 struct sdhci_host *host = dev_get_drvdata(dev); 554 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 555 struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host); 556 int ret; 557 558 ret = sdhci_runtime_suspend_host(host); 559 if (ret) 560 return ret; 561 562 if (host->tuning_mode != SDHCI_TUNING_MODE_3) 563 mmc_retune_needed(host->mmc); 564 565 clk_disable_unprepare(pxa->clk_io); 566 if (!IS_ERR(pxa->clk_core)) 567 clk_disable_unprepare(pxa->clk_core); 568 569 return 0; 570 } 571 572 static int sdhci_pxav3_runtime_resume(struct device *dev) 573 { 574 struct sdhci_host *host = dev_get_drvdata(dev); 575 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 576 struct sdhci_pxa *pxa = sdhci_pltfm_priv(pltfm_host); 577 578 clk_prepare_enable(pxa->clk_io); 579 if (!IS_ERR(pxa->clk_core)) 580 clk_prepare_enable(pxa->clk_core); 581 582 return sdhci_runtime_resume_host(host); 583 } 584 #endif 585 586 static const struct dev_pm_ops sdhci_pxav3_pmops = { 587 SET_SYSTEM_SLEEP_PM_OPS(sdhci_pxav3_suspend, sdhci_pxav3_resume) 588 SET_RUNTIME_PM_OPS(sdhci_pxav3_runtime_suspend, 589 sdhci_pxav3_runtime_resume, NULL) 590 }; 591 592 static struct platform_driver sdhci_pxav3_driver = { 593 .driver = { 594 .name = "sdhci-pxav3", 595 .of_match_table = of_match_ptr(sdhci_pxav3_of_match), 596 .pm = &sdhci_pxav3_pmops, 597 }, 598 .probe = sdhci_pxav3_probe, 599 .remove = sdhci_pxav3_remove, 600 }; 601 602 module_platform_driver(sdhci_pxav3_driver); 603 604 MODULE_DESCRIPTION("SDHCI driver for pxav3"); 605 MODULE_AUTHOR("Marvell International Ltd."); 606 MODULE_LICENSE("GPL v2"); 607 608