1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Atmel SDMMC controller driver. 4 * 5 * Copyright (C) 2015 Atmel, 6 * 2015 Ludovic Desroches <ludovic.desroches@atmel.com> 7 */ 8 9 #include <linux/clk.h> 10 #include <linux/delay.h> 11 #include <linux/err.h> 12 #include <linux/io.h> 13 #include <linux/kernel.h> 14 #include <linux/mmc/host.h> 15 #include <linux/mmc/slot-gpio.h> 16 #include <linux/module.h> 17 #include <linux/of.h> 18 #include <linux/of_device.h> 19 #include <linux/pm.h> 20 #include <linux/pm_runtime.h> 21 22 #include "sdhci-pltfm.h" 23 24 #define SDMMC_MC1R 0x204 25 #define SDMMC_MC1R_DDR BIT(3) 26 #define SDMMC_MC1R_FCD BIT(7) 27 #define SDMMC_CACR 0x230 28 #define SDMMC_CACR_CAPWREN BIT(0) 29 #define SDMMC_CACR_KEY (0x46 << 8) 30 31 #define SDHCI_AT91_PRESET_COMMON_CONF 0x400 /* drv type B, programmable clock mode */ 32 33 struct sdhci_at91_priv { 34 struct clk *hclock; 35 struct clk *gck; 36 struct clk *mainck; 37 bool restore_needed; 38 }; 39 40 static void sdhci_at91_set_force_card_detect(struct sdhci_host *host) 41 { 42 u8 mc1r; 43 44 mc1r = readb(host->ioaddr + SDMMC_MC1R); 45 mc1r |= SDMMC_MC1R_FCD; 46 writeb(mc1r, host->ioaddr + SDMMC_MC1R); 47 } 48 49 static void sdhci_at91_set_clock(struct sdhci_host *host, unsigned int clock) 50 { 51 u16 clk; 52 unsigned long timeout; 53 54 host->mmc->actual_clock = 0; 55 56 /* 57 * There is no requirement to disable the internal clock before 58 * changing the SD clock configuration. Moreover, disabling the 59 * internal clock, changing the configuration and re-enabling the 60 * internal clock causes some bugs. It can prevent to get the internal 61 * clock stable flag ready and an unexpected switch to the base clock 62 * when using presets. 63 */ 64 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); 65 clk &= SDHCI_CLOCK_INT_EN; 66 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); 67 68 if (clock == 0) 69 return; 70 71 clk = sdhci_calc_clk(host, clock, &host->mmc->actual_clock); 72 73 clk |= SDHCI_CLOCK_INT_EN; 74 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); 75 76 /* Wait max 20 ms */ 77 timeout = 20; 78 while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL)) 79 & SDHCI_CLOCK_INT_STABLE)) { 80 if (timeout == 0) { 81 pr_err("%s: Internal clock never stabilised.\n", 82 mmc_hostname(host->mmc)); 83 return; 84 } 85 timeout--; 86 mdelay(1); 87 } 88 89 clk |= SDHCI_CLOCK_CARD_EN; 90 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); 91 } 92 93 /* 94 * In this specific implementation of the SDHCI controller, the power register 95 * needs to have a valid voltage set even when the power supply is managed by 96 * an external regulator. 97 */ 98 static void sdhci_at91_set_power(struct sdhci_host *host, unsigned char mode, 99 unsigned short vdd) 100 { 101 if (!IS_ERR(host->mmc->supply.vmmc)) { 102 struct mmc_host *mmc = host->mmc; 103 104 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd); 105 } 106 sdhci_set_power_noreg(host, mode, vdd); 107 } 108 109 static void sdhci_at91_set_uhs_signaling(struct sdhci_host *host, 110 unsigned int timing) 111 { 112 if (timing == MMC_TIMING_MMC_DDR52) 113 sdhci_writeb(host, SDMMC_MC1R_DDR, SDMMC_MC1R); 114 sdhci_set_uhs_signaling(host, timing); 115 } 116 117 static void sdhci_at91_reset(struct sdhci_host *host, u8 mask) 118 { 119 sdhci_reset(host, mask); 120 121 if (host->mmc->caps & MMC_CAP_NONREMOVABLE) 122 sdhci_at91_set_force_card_detect(host); 123 } 124 125 static const struct sdhci_ops sdhci_at91_sama5d2_ops = { 126 .set_clock = sdhci_at91_set_clock, 127 .set_bus_width = sdhci_set_bus_width, 128 .reset = sdhci_at91_reset, 129 .set_uhs_signaling = sdhci_at91_set_uhs_signaling, 130 .set_power = sdhci_at91_set_power, 131 }; 132 133 static const struct sdhci_pltfm_data soc_data_sama5d2 = { 134 .ops = &sdhci_at91_sama5d2_ops, 135 }; 136 137 static const struct of_device_id sdhci_at91_dt_match[] = { 138 { .compatible = "atmel,sama5d2-sdhci", .data = &soc_data_sama5d2 }, 139 {} 140 }; 141 MODULE_DEVICE_TABLE(of, sdhci_at91_dt_match); 142 143 static int sdhci_at91_set_clks_presets(struct device *dev) 144 { 145 struct sdhci_host *host = dev_get_drvdata(dev); 146 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 147 struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host); 148 int ret; 149 unsigned int caps0, caps1; 150 unsigned int clk_base, clk_mul; 151 unsigned int gck_rate, real_gck_rate; 152 unsigned int preset_div; 153 154 /* 155 * The mult clock is provided by as a generated clock by the PMC 156 * controller. In order to set the rate of gck, we have to get the 157 * base clock rate and the clock mult from capabilities. 158 */ 159 clk_prepare_enable(priv->hclock); 160 caps0 = readl(host->ioaddr + SDHCI_CAPABILITIES); 161 caps1 = readl(host->ioaddr + SDHCI_CAPABILITIES_1); 162 clk_base = (caps0 & SDHCI_CLOCK_V3_BASE_MASK) >> SDHCI_CLOCK_BASE_SHIFT; 163 clk_mul = (caps1 & SDHCI_CLOCK_MUL_MASK) >> SDHCI_CLOCK_MUL_SHIFT; 164 gck_rate = clk_base * 1000000 * (clk_mul + 1); 165 ret = clk_set_rate(priv->gck, gck_rate); 166 if (ret < 0) { 167 dev_err(dev, "failed to set gck"); 168 clk_disable_unprepare(priv->hclock); 169 return ret; 170 } 171 /* 172 * We need to check if we have the requested rate for gck because in 173 * some cases this rate could be not supported. If it happens, the rate 174 * is the closest one gck can provide. We have to update the value 175 * of clk mul. 176 */ 177 real_gck_rate = clk_get_rate(priv->gck); 178 if (real_gck_rate != gck_rate) { 179 clk_mul = real_gck_rate / (clk_base * 1000000) - 1; 180 caps1 &= (~SDHCI_CLOCK_MUL_MASK); 181 caps1 |= ((clk_mul << SDHCI_CLOCK_MUL_SHIFT) & 182 SDHCI_CLOCK_MUL_MASK); 183 /* Set capabilities in r/w mode. */ 184 writel(SDMMC_CACR_KEY | SDMMC_CACR_CAPWREN, 185 host->ioaddr + SDMMC_CACR); 186 writel(caps1, host->ioaddr + SDHCI_CAPABILITIES_1); 187 /* Set capabilities in ro mode. */ 188 writel(0, host->ioaddr + SDMMC_CACR); 189 dev_info(dev, "update clk mul to %u as gck rate is %u Hz\n", 190 clk_mul, real_gck_rate); 191 } 192 193 /* 194 * We have to set preset values because it depends on the clk_mul 195 * value. Moreover, SDR104 is supported in a degraded mode since the 196 * maximum sd clock value is 120 MHz instead of 208 MHz. For that 197 * reason, we need to use presets to support SDR104. 198 */ 199 preset_div = DIV_ROUND_UP(real_gck_rate, 24000000) - 1; 200 writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, 201 host->ioaddr + SDHCI_PRESET_FOR_SDR12); 202 preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1; 203 writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, 204 host->ioaddr + SDHCI_PRESET_FOR_SDR25); 205 preset_div = DIV_ROUND_UP(real_gck_rate, 100000000) - 1; 206 writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, 207 host->ioaddr + SDHCI_PRESET_FOR_SDR50); 208 preset_div = DIV_ROUND_UP(real_gck_rate, 120000000) - 1; 209 writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, 210 host->ioaddr + SDHCI_PRESET_FOR_SDR104); 211 preset_div = DIV_ROUND_UP(real_gck_rate, 50000000) - 1; 212 writew(SDHCI_AT91_PRESET_COMMON_CONF | preset_div, 213 host->ioaddr + SDHCI_PRESET_FOR_DDR50); 214 215 clk_prepare_enable(priv->mainck); 216 clk_prepare_enable(priv->gck); 217 218 return 0; 219 } 220 221 #ifdef CONFIG_PM_SLEEP 222 static int sdhci_at91_suspend(struct device *dev) 223 { 224 struct sdhci_host *host = dev_get_drvdata(dev); 225 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 226 struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host); 227 int ret; 228 229 ret = pm_runtime_force_suspend(dev); 230 231 priv->restore_needed = true; 232 233 return ret; 234 } 235 #endif /* CONFIG_PM_SLEEP */ 236 237 #ifdef CONFIG_PM 238 static int sdhci_at91_runtime_suspend(struct device *dev) 239 { 240 struct sdhci_host *host = dev_get_drvdata(dev); 241 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 242 struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host); 243 int ret; 244 245 ret = sdhci_runtime_suspend_host(host); 246 247 if (host->tuning_mode != SDHCI_TUNING_MODE_3) 248 mmc_retune_needed(host->mmc); 249 250 clk_disable_unprepare(priv->gck); 251 clk_disable_unprepare(priv->hclock); 252 clk_disable_unprepare(priv->mainck); 253 254 return ret; 255 } 256 257 static int sdhci_at91_runtime_resume(struct device *dev) 258 { 259 struct sdhci_host *host = dev_get_drvdata(dev); 260 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 261 struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host); 262 int ret; 263 264 if (priv->restore_needed) { 265 ret = sdhci_at91_set_clks_presets(dev); 266 if (ret) 267 return ret; 268 269 priv->restore_needed = false; 270 goto out; 271 } 272 273 ret = clk_prepare_enable(priv->mainck); 274 if (ret) { 275 dev_err(dev, "can't enable mainck\n"); 276 return ret; 277 } 278 279 ret = clk_prepare_enable(priv->hclock); 280 if (ret) { 281 dev_err(dev, "can't enable hclock\n"); 282 return ret; 283 } 284 285 ret = clk_prepare_enable(priv->gck); 286 if (ret) { 287 dev_err(dev, "can't enable gck\n"); 288 return ret; 289 } 290 291 out: 292 return sdhci_runtime_resume_host(host, 0); 293 } 294 #endif /* CONFIG_PM */ 295 296 static const struct dev_pm_ops sdhci_at91_dev_pm_ops = { 297 SET_SYSTEM_SLEEP_PM_OPS(sdhci_at91_suspend, pm_runtime_force_resume) 298 SET_RUNTIME_PM_OPS(sdhci_at91_runtime_suspend, 299 sdhci_at91_runtime_resume, 300 NULL) 301 }; 302 303 static int sdhci_at91_probe(struct platform_device *pdev) 304 { 305 const struct of_device_id *match; 306 const struct sdhci_pltfm_data *soc_data; 307 struct sdhci_host *host; 308 struct sdhci_pltfm_host *pltfm_host; 309 struct sdhci_at91_priv *priv; 310 int ret; 311 312 match = of_match_device(sdhci_at91_dt_match, &pdev->dev); 313 if (!match) 314 return -EINVAL; 315 soc_data = match->data; 316 317 host = sdhci_pltfm_init(pdev, soc_data, sizeof(*priv)); 318 if (IS_ERR(host)) 319 return PTR_ERR(host); 320 321 pltfm_host = sdhci_priv(host); 322 priv = sdhci_pltfm_priv(pltfm_host); 323 324 priv->mainck = devm_clk_get(&pdev->dev, "baseclk"); 325 if (IS_ERR(priv->mainck)) { 326 dev_err(&pdev->dev, "failed to get baseclk\n"); 327 return PTR_ERR(priv->mainck); 328 } 329 330 priv->hclock = devm_clk_get(&pdev->dev, "hclock"); 331 if (IS_ERR(priv->hclock)) { 332 dev_err(&pdev->dev, "failed to get hclock\n"); 333 return PTR_ERR(priv->hclock); 334 } 335 336 priv->gck = devm_clk_get(&pdev->dev, "multclk"); 337 if (IS_ERR(priv->gck)) { 338 dev_err(&pdev->dev, "failed to get multclk\n"); 339 return PTR_ERR(priv->gck); 340 } 341 342 ret = sdhci_at91_set_clks_presets(&pdev->dev); 343 if (ret) 344 goto sdhci_pltfm_free; 345 346 priv->restore_needed = false; 347 348 ret = mmc_of_parse(host->mmc); 349 if (ret) 350 goto clocks_disable_unprepare; 351 352 sdhci_get_of_property(pdev); 353 354 pm_runtime_get_noresume(&pdev->dev); 355 pm_runtime_set_active(&pdev->dev); 356 pm_runtime_enable(&pdev->dev); 357 pm_runtime_set_autosuspend_delay(&pdev->dev, 50); 358 pm_runtime_use_autosuspend(&pdev->dev); 359 360 /* HS200 is broken at this moment */ 361 host->quirks2 = SDHCI_QUIRK2_BROKEN_HS200; 362 363 ret = sdhci_add_host(host); 364 if (ret) 365 goto pm_runtime_disable; 366 367 /* 368 * When calling sdhci_runtime_suspend_host(), the sdhci layer makes 369 * the assumption that all the clocks of the controller are disabled. 370 * It means we can't get irq from it when it is runtime suspended. 371 * For that reason, it is not planned to wake-up on a card detect irq 372 * from the controller. 373 * If we want to use runtime PM and to be able to wake-up on card 374 * insertion, we have to use a GPIO for the card detection or we can 375 * use polling. Be aware that using polling will resume/suspend the 376 * controller between each attempt. 377 * Disable SDHCI_QUIRK_BROKEN_CARD_DETECTION to be sure nobody tries 378 * to enable polling via device tree with broken-cd property. 379 */ 380 if (mmc_card_is_removable(host->mmc) && 381 mmc_gpio_get_cd(host->mmc) < 0) { 382 host->mmc->caps |= MMC_CAP_NEEDS_POLL; 383 host->quirks &= ~SDHCI_QUIRK_BROKEN_CARD_DETECTION; 384 } 385 386 /* 387 * If the device attached to the MMC bus is not removable, it is safer 388 * to set the Force Card Detect bit. People often don't connect the 389 * card detect signal and use this pin for another purpose. If the card 390 * detect pin is not muxed to SDHCI controller, a default value is 391 * used. This value can be different from a SoC revision to another 392 * one. Problems come when this default value is not card present. To 393 * avoid this case, if the device is non removable then the card 394 * detection procedure using the SDMCC_CD signal is bypassed. 395 * This bit is reset when a software reset for all command is performed 396 * so we need to implement our own reset function to set back this bit. 397 */ 398 if (host->mmc->caps & MMC_CAP_NONREMOVABLE) 399 sdhci_at91_set_force_card_detect(host); 400 401 pm_runtime_put_autosuspend(&pdev->dev); 402 403 return 0; 404 405 pm_runtime_disable: 406 pm_runtime_disable(&pdev->dev); 407 pm_runtime_set_suspended(&pdev->dev); 408 pm_runtime_put_noidle(&pdev->dev); 409 clocks_disable_unprepare: 410 clk_disable_unprepare(priv->gck); 411 clk_disable_unprepare(priv->mainck); 412 clk_disable_unprepare(priv->hclock); 413 sdhci_pltfm_free: 414 sdhci_pltfm_free(pdev); 415 return ret; 416 } 417 418 static int sdhci_at91_remove(struct platform_device *pdev) 419 { 420 struct sdhci_host *host = platform_get_drvdata(pdev); 421 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 422 struct sdhci_at91_priv *priv = sdhci_pltfm_priv(pltfm_host); 423 struct clk *gck = priv->gck; 424 struct clk *hclock = priv->hclock; 425 struct clk *mainck = priv->mainck; 426 427 pm_runtime_get_sync(&pdev->dev); 428 pm_runtime_disable(&pdev->dev); 429 pm_runtime_put_noidle(&pdev->dev); 430 431 sdhci_pltfm_unregister(pdev); 432 433 clk_disable_unprepare(gck); 434 clk_disable_unprepare(hclock); 435 clk_disable_unprepare(mainck); 436 437 return 0; 438 } 439 440 static struct platform_driver sdhci_at91_driver = { 441 .driver = { 442 .name = "sdhci-at91", 443 .of_match_table = sdhci_at91_dt_match, 444 .pm = &sdhci_at91_dev_pm_ops, 445 }, 446 .probe = sdhci_at91_probe, 447 .remove = sdhci_at91_remove, 448 }; 449 450 module_platform_driver(sdhci_at91_driver); 451 452 MODULE_DESCRIPTION("SDHCI driver for at91"); 453 MODULE_AUTHOR("Ludovic Desroches <ludovic.desroches@atmel.com>"); 454 MODULE_LICENSE("GPL v2"); 455