1 /* 2 * drivers/mmc/host/sdhci-msm.c - Qualcomm SDHCI Platform driver 3 * 4 * Copyright (c) 2013-2014, The Linux Foundation. All rights reserved. 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 and 8 * only version 2 as published by the Free Software Foundation. 9 * 10 * This program is distributed in the hope that it will be useful, 11 * but WITHOUT ANY WARRANTY; without even the implied warranty of 12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 13 * GNU General Public License for more details. 14 * 15 */ 16 17 #include <linux/module.h> 18 #include <linux/of_device.h> 19 #include <linux/delay.h> 20 #include <linux/mmc/mmc.h> 21 #include <linux/slab.h> 22 23 #include "sdhci-pltfm.h" 24 25 #define CORE_HC_MODE 0x78 26 #define HC_MODE_EN 0x1 27 #define CORE_POWER 0x0 28 #define CORE_SW_RST BIT(7) 29 30 #define MAX_PHASES 16 31 #define CORE_DLL_LOCK BIT(7) 32 #define CORE_DLL_EN BIT(16) 33 #define CORE_CDR_EN BIT(17) 34 #define CORE_CK_OUT_EN BIT(18) 35 #define CORE_CDR_EXT_EN BIT(19) 36 #define CORE_DLL_PDN BIT(29) 37 #define CORE_DLL_RST BIT(30) 38 #define CORE_DLL_CONFIG 0x100 39 #define CORE_DLL_STATUS 0x108 40 41 #define CORE_VENDOR_SPEC 0x10c 42 #define CORE_CLK_PWRSAVE BIT(1) 43 44 #define CDR_SELEXT_SHIFT 20 45 #define CDR_SELEXT_MASK (0xf << CDR_SELEXT_SHIFT) 46 #define CMUX_SHIFT_PHASE_SHIFT 24 47 #define CMUX_SHIFT_PHASE_MASK (7 << CMUX_SHIFT_PHASE_SHIFT) 48 49 static const u32 tuning_block_64[] = { 50 0x00ff0fff, 0xccc3ccff, 0xffcc3cc3, 0xeffefffe, 51 0xddffdfff, 0xfbfffbff, 0xff7fffbf, 0xefbdf777, 52 0xf0fff0ff, 0x3cccfc0f, 0xcfcc33cc, 0xeeffefff, 53 0xfdfffdff, 0xffbfffdf, 0xfff7ffbb, 0xde7b7ff7 54 }; 55 56 static const u32 tuning_block_128[] = { 57 0xff00ffff, 0x0000ffff, 0xccccffff, 0xcccc33cc, 58 0xcc3333cc, 0xffffcccc, 0xffffeeff, 0xffeeeeff, 59 0xffddffff, 0xddddffff, 0xbbffffff, 0xbbffffff, 60 0xffffffbb, 0xffffff77, 0x77ff7777, 0xffeeddbb, 61 0x00ffffff, 0x00ffffff, 0xccffff00, 0xcc33cccc, 62 0x3333cccc, 0xffcccccc, 0xffeeffff, 0xeeeeffff, 63 0xddffffff, 0xddffffff, 0xffffffdd, 0xffffffbb, 64 0xffffbbbb, 0xffff77ff, 0xff7777ff, 0xeeddbb77 65 }; 66 67 struct sdhci_msm_host { 68 struct platform_device *pdev; 69 void __iomem *core_mem; /* MSM SDCC mapped address */ 70 struct clk *clk; /* main SD/MMC bus clock */ 71 struct clk *pclk; /* SDHC peripheral bus clock */ 72 struct clk *bus_clk; /* SDHC bus voter clock */ 73 struct mmc_host *mmc; 74 struct sdhci_pltfm_data sdhci_msm_pdata; 75 }; 76 77 /* Platform specific tuning */ 78 static inline int msm_dll_poll_ck_out_en(struct sdhci_host *host, u8 poll) 79 { 80 u32 wait_cnt = 50; 81 u8 ck_out_en; 82 struct mmc_host *mmc = host->mmc; 83 84 /* Poll for CK_OUT_EN bit. max. poll time = 50us */ 85 ck_out_en = !!(readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) & 86 CORE_CK_OUT_EN); 87 88 while (ck_out_en != poll) { 89 if (--wait_cnt == 0) { 90 dev_err(mmc_dev(mmc), "%s: CK_OUT_EN bit is not %d\n", 91 mmc_hostname(mmc), poll); 92 return -ETIMEDOUT; 93 } 94 udelay(1); 95 96 ck_out_en = !!(readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) & 97 CORE_CK_OUT_EN); 98 } 99 100 return 0; 101 } 102 103 static int msm_config_cm_dll_phase(struct sdhci_host *host, u8 phase) 104 { 105 int rc; 106 static const u8 grey_coded_phase_table[] = { 107 0x0, 0x1, 0x3, 0x2, 0x6, 0x7, 0x5, 0x4, 108 0xc, 0xd, 0xf, 0xe, 0xa, 0xb, 0x9, 0x8 109 }; 110 unsigned long flags; 111 u32 config; 112 struct mmc_host *mmc = host->mmc; 113 114 spin_lock_irqsave(&host->lock, flags); 115 116 config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); 117 config &= ~(CORE_CDR_EN | CORE_CK_OUT_EN); 118 config |= (CORE_CDR_EXT_EN | CORE_DLL_EN); 119 writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); 120 121 /* Wait until CK_OUT_EN bit of DLL_CONFIG register becomes '0' */ 122 rc = msm_dll_poll_ck_out_en(host, 0); 123 if (rc) 124 goto err_out; 125 126 /* 127 * Write the selected DLL clock output phase (0 ... 15) 128 * to CDR_SELEXT bit field of DLL_CONFIG register. 129 */ 130 config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); 131 config &= ~CDR_SELEXT_MASK; 132 config |= grey_coded_phase_table[phase] << CDR_SELEXT_SHIFT; 133 writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); 134 135 /* Set CK_OUT_EN bit of DLL_CONFIG register to 1. */ 136 writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) 137 | CORE_CK_OUT_EN), host->ioaddr + CORE_DLL_CONFIG); 138 139 /* Wait until CK_OUT_EN bit of DLL_CONFIG register becomes '1' */ 140 rc = msm_dll_poll_ck_out_en(host, 1); 141 if (rc) 142 goto err_out; 143 144 config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); 145 config |= CORE_CDR_EN; 146 config &= ~CORE_CDR_EXT_EN; 147 writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); 148 goto out; 149 150 err_out: 151 dev_err(mmc_dev(mmc), "%s: Failed to set DLL phase: %d\n", 152 mmc_hostname(mmc), phase); 153 out: 154 spin_unlock_irqrestore(&host->lock, flags); 155 return rc; 156 } 157 158 /* 159 * Find out the greatest range of consecuitive selected 160 * DLL clock output phases that can be used as sampling 161 * setting for SD3.0 UHS-I card read operation (in SDR104 162 * timing mode) or for eMMC4.5 card read operation (in HS200 163 * timing mode). 164 * Select the 3/4 of the range and configure the DLL with the 165 * selected DLL clock output phase. 166 */ 167 168 static int msm_find_most_appropriate_phase(struct sdhci_host *host, 169 u8 *phase_table, u8 total_phases) 170 { 171 int ret; 172 u8 ranges[MAX_PHASES][MAX_PHASES] = { {0}, {0} }; 173 u8 phases_per_row[MAX_PHASES] = { 0 }; 174 int row_index = 0, col_index = 0, selected_row_index = 0, curr_max = 0; 175 int i, cnt, phase_0_raw_index = 0, phase_15_raw_index = 0; 176 bool phase_0_found = false, phase_15_found = false; 177 struct mmc_host *mmc = host->mmc; 178 179 if (!total_phases || (total_phases > MAX_PHASES)) { 180 dev_err(mmc_dev(mmc), "%s: Invalid argument: total_phases=%d\n", 181 mmc_hostname(mmc), total_phases); 182 return -EINVAL; 183 } 184 185 for (cnt = 0; cnt < total_phases; cnt++) { 186 ranges[row_index][col_index] = phase_table[cnt]; 187 phases_per_row[row_index] += 1; 188 col_index++; 189 190 if ((cnt + 1) == total_phases) { 191 continue; 192 /* check if next phase in phase_table is consecutive or not */ 193 } else if ((phase_table[cnt] + 1) != phase_table[cnt + 1]) { 194 row_index++; 195 col_index = 0; 196 } 197 } 198 199 if (row_index >= MAX_PHASES) 200 return -EINVAL; 201 202 /* Check if phase-0 is present in first valid window? */ 203 if (!ranges[0][0]) { 204 phase_0_found = true; 205 phase_0_raw_index = 0; 206 /* Check if cycle exist between 2 valid windows */ 207 for (cnt = 1; cnt <= row_index; cnt++) { 208 if (phases_per_row[cnt]) { 209 for (i = 0; i < phases_per_row[cnt]; i++) { 210 if (ranges[cnt][i] == 15) { 211 phase_15_found = true; 212 phase_15_raw_index = cnt; 213 break; 214 } 215 } 216 } 217 } 218 } 219 220 /* If 2 valid windows form cycle then merge them as single window */ 221 if (phase_0_found && phase_15_found) { 222 /* number of phases in raw where phase 0 is present */ 223 u8 phases_0 = phases_per_row[phase_0_raw_index]; 224 /* number of phases in raw where phase 15 is present */ 225 u8 phases_15 = phases_per_row[phase_15_raw_index]; 226 227 if (phases_0 + phases_15 >= MAX_PHASES) 228 /* 229 * If there are more than 1 phase windows then total 230 * number of phases in both the windows should not be 231 * more than or equal to MAX_PHASES. 232 */ 233 return -EINVAL; 234 235 /* Merge 2 cyclic windows */ 236 i = phases_15; 237 for (cnt = 0; cnt < phases_0; cnt++) { 238 ranges[phase_15_raw_index][i] = 239 ranges[phase_0_raw_index][cnt]; 240 if (++i >= MAX_PHASES) 241 break; 242 } 243 244 phases_per_row[phase_0_raw_index] = 0; 245 phases_per_row[phase_15_raw_index] = phases_15 + phases_0; 246 } 247 248 for (cnt = 0; cnt <= row_index; cnt++) { 249 if (phases_per_row[cnt] > curr_max) { 250 curr_max = phases_per_row[cnt]; 251 selected_row_index = cnt; 252 } 253 } 254 255 i = (curr_max * 3) / 4; 256 if (i) 257 i--; 258 259 ret = ranges[selected_row_index][i]; 260 261 if (ret >= MAX_PHASES) { 262 ret = -EINVAL; 263 dev_err(mmc_dev(mmc), "%s: Invalid phase selected=%d\n", 264 mmc_hostname(mmc), ret); 265 } 266 267 return ret; 268 } 269 270 static inline void msm_cm_dll_set_freq(struct sdhci_host *host) 271 { 272 u32 mclk_freq = 0, config; 273 274 /* Program the MCLK value to MCLK_FREQ bit field */ 275 if (host->clock <= 112000000) 276 mclk_freq = 0; 277 else if (host->clock <= 125000000) 278 mclk_freq = 1; 279 else if (host->clock <= 137000000) 280 mclk_freq = 2; 281 else if (host->clock <= 150000000) 282 mclk_freq = 3; 283 else if (host->clock <= 162000000) 284 mclk_freq = 4; 285 else if (host->clock <= 175000000) 286 mclk_freq = 5; 287 else if (host->clock <= 187000000) 288 mclk_freq = 6; 289 else if (host->clock <= 200000000) 290 mclk_freq = 7; 291 292 config = readl_relaxed(host->ioaddr + CORE_DLL_CONFIG); 293 config &= ~CMUX_SHIFT_PHASE_MASK; 294 config |= mclk_freq << CMUX_SHIFT_PHASE_SHIFT; 295 writel_relaxed(config, host->ioaddr + CORE_DLL_CONFIG); 296 } 297 298 /* Initialize the DLL (Programmable Delay Line) */ 299 static int msm_init_cm_dll(struct sdhci_host *host) 300 { 301 struct mmc_host *mmc = host->mmc; 302 int wait_cnt = 50; 303 unsigned long flags; 304 305 spin_lock_irqsave(&host->lock, flags); 306 307 /* 308 * Make sure that clock is always enabled when DLL 309 * tuning is in progress. Keeping PWRSAVE ON may 310 * turn off the clock. 311 */ 312 writel_relaxed((readl_relaxed(host->ioaddr + CORE_VENDOR_SPEC) 313 & ~CORE_CLK_PWRSAVE), host->ioaddr + CORE_VENDOR_SPEC); 314 315 /* Write 1 to DLL_RST bit of DLL_CONFIG register */ 316 writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) 317 | CORE_DLL_RST), host->ioaddr + CORE_DLL_CONFIG); 318 319 /* Write 1 to DLL_PDN bit of DLL_CONFIG register */ 320 writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) 321 | CORE_DLL_PDN), host->ioaddr + CORE_DLL_CONFIG); 322 msm_cm_dll_set_freq(host); 323 324 /* Write 0 to DLL_RST bit of DLL_CONFIG register */ 325 writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) 326 & ~CORE_DLL_RST), host->ioaddr + CORE_DLL_CONFIG); 327 328 /* Write 0 to DLL_PDN bit of DLL_CONFIG register */ 329 writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) 330 & ~CORE_DLL_PDN), host->ioaddr + CORE_DLL_CONFIG); 331 332 /* Set DLL_EN bit to 1. */ 333 writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) 334 | CORE_DLL_EN), host->ioaddr + CORE_DLL_CONFIG); 335 336 /* Set CK_OUT_EN bit to 1. */ 337 writel_relaxed((readl_relaxed(host->ioaddr + CORE_DLL_CONFIG) 338 | CORE_CK_OUT_EN), host->ioaddr + CORE_DLL_CONFIG); 339 340 /* Wait until DLL_LOCK bit of DLL_STATUS register becomes '1' */ 341 while (!(readl_relaxed(host->ioaddr + CORE_DLL_STATUS) & 342 CORE_DLL_LOCK)) { 343 /* max. wait for 50us sec for LOCK bit to be set */ 344 if (--wait_cnt == 0) { 345 dev_err(mmc_dev(mmc), "%s: DLL failed to LOCK\n", 346 mmc_hostname(mmc)); 347 spin_unlock_irqrestore(&host->lock, flags); 348 return -ETIMEDOUT; 349 } 350 udelay(1); 351 } 352 353 spin_unlock_irqrestore(&host->lock, flags); 354 return 0; 355 } 356 357 static int sdhci_msm_execute_tuning(struct sdhci_host *host, u32 opcode) 358 { 359 int tuning_seq_cnt = 3; 360 u8 phase, *data_buf, tuned_phases[16], tuned_phase_cnt = 0; 361 const u32 *tuning_block_pattern = tuning_block_64; 362 int size = sizeof(tuning_block_64); /* Pattern size in bytes */ 363 int rc; 364 struct mmc_host *mmc = host->mmc; 365 struct mmc_ios ios = host->mmc->ios; 366 367 /* 368 * Tuning is required for SDR104, HS200 and HS400 cards and 369 * if clock frequency is greater than 100MHz in these modes. 370 */ 371 if (host->clock <= 100 * 1000 * 1000 || 372 !((ios.timing == MMC_TIMING_MMC_HS200) || 373 (ios.timing == MMC_TIMING_UHS_SDR104))) 374 return 0; 375 376 if ((opcode == MMC_SEND_TUNING_BLOCK_HS200) && 377 (mmc->ios.bus_width == MMC_BUS_WIDTH_8)) { 378 tuning_block_pattern = tuning_block_128; 379 size = sizeof(tuning_block_128); 380 } 381 382 data_buf = kmalloc(size, GFP_KERNEL); 383 if (!data_buf) 384 return -ENOMEM; 385 386 retry: 387 /* First of all reset the tuning block */ 388 rc = msm_init_cm_dll(host); 389 if (rc) 390 goto out; 391 392 phase = 0; 393 do { 394 struct mmc_command cmd = { 0 }; 395 struct mmc_data data = { 0 }; 396 struct mmc_request mrq = { 397 .cmd = &cmd, 398 .data = &data 399 }; 400 struct scatterlist sg; 401 402 /* Set the phase in delay line hw block */ 403 rc = msm_config_cm_dll_phase(host, phase); 404 if (rc) 405 goto out; 406 407 cmd.opcode = opcode; 408 cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC; 409 410 data.blksz = size; 411 data.blocks = 1; 412 data.flags = MMC_DATA_READ; 413 data.timeout_ns = NSEC_PER_SEC; /* 1 second */ 414 415 data.sg = &sg; 416 data.sg_len = 1; 417 sg_init_one(&sg, data_buf, size); 418 memset(data_buf, 0, size); 419 mmc_wait_for_req(mmc, &mrq); 420 421 if (!cmd.error && !data.error && 422 !memcmp(data_buf, tuning_block_pattern, size)) { 423 /* Tuning is successful at this tuning point */ 424 tuned_phases[tuned_phase_cnt++] = phase; 425 dev_dbg(mmc_dev(mmc), "%s: Found good phase = %d\n", 426 mmc_hostname(mmc), phase); 427 } 428 } while (++phase < ARRAY_SIZE(tuned_phases)); 429 430 if (tuned_phase_cnt) { 431 rc = msm_find_most_appropriate_phase(host, tuned_phases, 432 tuned_phase_cnt); 433 if (rc < 0) 434 goto out; 435 else 436 phase = rc; 437 438 /* 439 * Finally set the selected phase in delay 440 * line hw block. 441 */ 442 rc = msm_config_cm_dll_phase(host, phase); 443 if (rc) 444 goto out; 445 dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n", 446 mmc_hostname(mmc), phase); 447 } else { 448 if (--tuning_seq_cnt) 449 goto retry; 450 /* Tuning failed */ 451 dev_dbg(mmc_dev(mmc), "%s: No tuning point found\n", 452 mmc_hostname(mmc)); 453 rc = -EIO; 454 } 455 456 out: 457 kfree(data_buf); 458 return rc; 459 } 460 461 static const struct of_device_id sdhci_msm_dt_match[] = { 462 { .compatible = "qcom,sdhci-msm-v4" }, 463 {}, 464 }; 465 466 MODULE_DEVICE_TABLE(of, sdhci_msm_dt_match); 467 468 static struct sdhci_ops sdhci_msm_ops = { 469 .platform_execute_tuning = sdhci_msm_execute_tuning, 470 .reset = sdhci_reset, 471 .set_clock = sdhci_set_clock, 472 .set_bus_width = sdhci_set_bus_width, 473 .set_uhs_signaling = sdhci_set_uhs_signaling, 474 }; 475 476 static int sdhci_msm_probe(struct platform_device *pdev) 477 { 478 struct sdhci_host *host; 479 struct sdhci_pltfm_host *pltfm_host; 480 struct sdhci_msm_host *msm_host; 481 struct resource *core_memres; 482 int ret; 483 u16 host_version; 484 485 msm_host = devm_kzalloc(&pdev->dev, sizeof(*msm_host), GFP_KERNEL); 486 if (!msm_host) 487 return -ENOMEM; 488 489 msm_host->sdhci_msm_pdata.ops = &sdhci_msm_ops; 490 host = sdhci_pltfm_init(pdev, &msm_host->sdhci_msm_pdata, 0); 491 if (IS_ERR(host)) 492 return PTR_ERR(host); 493 494 pltfm_host = sdhci_priv(host); 495 pltfm_host->priv = msm_host; 496 msm_host->mmc = host->mmc; 497 msm_host->pdev = pdev; 498 499 ret = mmc_of_parse(host->mmc); 500 if (ret) 501 goto pltfm_free; 502 503 sdhci_get_of_property(pdev); 504 505 /* Setup SDCC bus voter clock. */ 506 msm_host->bus_clk = devm_clk_get(&pdev->dev, "bus"); 507 if (!IS_ERR(msm_host->bus_clk)) { 508 /* Vote for max. clk rate for max. performance */ 509 ret = clk_set_rate(msm_host->bus_clk, INT_MAX); 510 if (ret) 511 goto pltfm_free; 512 ret = clk_prepare_enable(msm_host->bus_clk); 513 if (ret) 514 goto pltfm_free; 515 } 516 517 /* Setup main peripheral bus clock */ 518 msm_host->pclk = devm_clk_get(&pdev->dev, "iface"); 519 if (IS_ERR(msm_host->pclk)) { 520 ret = PTR_ERR(msm_host->pclk); 521 dev_err(&pdev->dev, "Perpheral clk setup failed (%d)\n", ret); 522 goto bus_clk_disable; 523 } 524 525 ret = clk_prepare_enable(msm_host->pclk); 526 if (ret) 527 goto bus_clk_disable; 528 529 /* Setup SDC MMC clock */ 530 msm_host->clk = devm_clk_get(&pdev->dev, "core"); 531 if (IS_ERR(msm_host->clk)) { 532 ret = PTR_ERR(msm_host->clk); 533 dev_err(&pdev->dev, "SDC MMC clk setup failed (%d)\n", ret); 534 goto pclk_disable; 535 } 536 537 ret = clk_prepare_enable(msm_host->clk); 538 if (ret) 539 goto pclk_disable; 540 541 core_memres = platform_get_resource(pdev, IORESOURCE_MEM, 1); 542 msm_host->core_mem = devm_ioremap_resource(&pdev->dev, core_memres); 543 544 if (IS_ERR(msm_host->core_mem)) { 545 dev_err(&pdev->dev, "Failed to remap registers\n"); 546 ret = PTR_ERR(msm_host->core_mem); 547 goto clk_disable; 548 } 549 550 /* Reset the core and Enable SDHC mode */ 551 writel_relaxed(readl_relaxed(msm_host->core_mem + CORE_POWER) | 552 CORE_SW_RST, msm_host->core_mem + CORE_POWER); 553 554 /* SW reset can take upto 10HCLK + 15MCLK cycles. (min 40us) */ 555 usleep_range(1000, 5000); 556 if (readl(msm_host->core_mem + CORE_POWER) & CORE_SW_RST) { 557 dev_err(&pdev->dev, "Stuck in reset\n"); 558 ret = -ETIMEDOUT; 559 goto clk_disable; 560 } 561 562 /* Set HC_MODE_EN bit in HC_MODE register */ 563 writel_relaxed(HC_MODE_EN, (msm_host->core_mem + CORE_HC_MODE)); 564 565 host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION; 566 host->quirks |= SDHCI_QUIRK_SINGLE_POWER_WRITE; 567 568 host_version = readw_relaxed((host->ioaddr + SDHCI_HOST_VERSION)); 569 dev_dbg(&pdev->dev, "Host Version: 0x%x Vendor Version 0x%x\n", 570 host_version, ((host_version & SDHCI_VENDOR_VER_MASK) >> 571 SDHCI_VENDOR_VER_SHIFT)); 572 573 ret = sdhci_add_host(host); 574 if (ret) 575 goto clk_disable; 576 577 return 0; 578 579 clk_disable: 580 clk_disable_unprepare(msm_host->clk); 581 pclk_disable: 582 clk_disable_unprepare(msm_host->pclk); 583 bus_clk_disable: 584 if (!IS_ERR(msm_host->bus_clk)) 585 clk_disable_unprepare(msm_host->bus_clk); 586 pltfm_free: 587 sdhci_pltfm_free(pdev); 588 return ret; 589 } 590 591 static int sdhci_msm_remove(struct platform_device *pdev) 592 { 593 struct sdhci_host *host = platform_get_drvdata(pdev); 594 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 595 struct sdhci_msm_host *msm_host = pltfm_host->priv; 596 int dead = (readl_relaxed(host->ioaddr + SDHCI_INT_STATUS) == 597 0xffffffff); 598 599 sdhci_remove_host(host, dead); 600 sdhci_pltfm_free(pdev); 601 clk_disable_unprepare(msm_host->clk); 602 clk_disable_unprepare(msm_host->pclk); 603 if (!IS_ERR(msm_host->bus_clk)) 604 clk_disable_unprepare(msm_host->bus_clk); 605 return 0; 606 } 607 608 static struct platform_driver sdhci_msm_driver = { 609 .probe = sdhci_msm_probe, 610 .remove = sdhci_msm_remove, 611 .driver = { 612 .name = "sdhci_msm", 613 .owner = THIS_MODULE, 614 .of_match_table = sdhci_msm_dt_match, 615 }, 616 }; 617 618 module_platform_driver(sdhci_msm_driver); 619 620 MODULE_DESCRIPTION("Qualcomm Secure Digital Host Controller Interface driver"); 621 MODULE_LICENSE("GPL v2"); 622