1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright (C) 2013 - 2015 Fujitsu Semiconductor, Ltd 4 * Vincent Yang <vincent.yang@tw.fujitsu.com> 5 * Copyright (C) 2015 Linaro Ltd Andy Green <andy.green@linaro.org> 6 * Copyright (C) 2019 Socionext Inc. 7 * Takao Orito <orito.takao@socionext.com> 8 */ 9 10 #include <linux/bits.h> 11 #include <linux/clk.h> 12 #include <linux/delay.h> 13 #include <linux/err.h> 14 #include <linux/gpio/consumer.h> 15 #include <linux/module.h> 16 #include <linux/of.h> 17 #include <linux/property.h> 18 19 #include "sdhci-pltfm.h" 20 #include "sdhci_f_sdh30.h" 21 22 /* milbeaut bridge controller register */ 23 #define MLB_SOFT_RESET 0x0200 24 #define MLB_SOFT_RESET_RSTX BIT(0) 25 26 #define MLB_WP_CD_LED_SET 0x0210 27 #define MLB_WP_CD_LED_SET_LED_INV BIT(2) 28 29 #define MLB_CR_SET 0x0220 30 #define MLB_CR_SET_CR_TOCLKUNIT BIT(24) 31 #define MLB_CR_SET_CR_TOCLKFREQ_SFT (16) 32 #define MLB_CR_SET_CR_TOCLKFREQ_MASK (0x3F << MLB_CR_SET_CR_TOCLKFREQ_SFT) 33 #define MLB_CR_SET_CR_BCLKFREQ_SFT (8) 34 #define MLB_CR_SET_CR_BCLKFREQ_MASK (0xFF << MLB_CR_SET_CR_BCLKFREQ_SFT) 35 #define MLB_CR_SET_CR_RTUNTIMER_SFT (4) 36 #define MLB_CR_SET_CR_RTUNTIMER_MASK (0xF << MLB_CR_SET_CR_RTUNTIMER_SFT) 37 38 #define MLB_SD_TOCLK_I_DIV 16 39 #define MLB_TOCLKFREQ_UNIT_THRES 16000000 40 #define MLB_CAL_TOCLKFREQ_MHZ(rate) (rate / MLB_SD_TOCLK_I_DIV / 1000000) 41 #define MLB_CAL_TOCLKFREQ_KHZ(rate) (rate / MLB_SD_TOCLK_I_DIV / 1000) 42 #define MLB_TOCLKFREQ_MAX 63 43 #define MLB_TOCLKFREQ_MIN 1 44 45 #define MLB_SD_BCLK_I_DIV 4 46 #define MLB_CAL_BCLKFREQ(rate) (rate / MLB_SD_BCLK_I_DIV / 1000000) 47 #define MLB_BCLKFREQ_MAX 255 48 #define MLB_BCLKFREQ_MIN 1 49 50 #define MLB_CDR_SET 0x0230 51 #define MLB_CDR_SET_CLK2POW16 3 52 53 struct f_sdhost_priv { 54 struct clk *clk_iface; 55 struct clk *clk; 56 struct device *dev; 57 bool enable_cmd_dat_delay; 58 }; 59 60 static void sdhci_milbeaut_soft_voltage_switch(struct sdhci_host *host) 61 { 62 u32 ctrl = 0; 63 64 usleep_range(2500, 3000); 65 ctrl = sdhci_readl(host, F_SDH30_IO_CONTROL2); 66 ctrl |= F_SDH30_CRES_O_DN; 67 sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2); 68 ctrl |= F_SDH30_MSEL_O_1_8; 69 sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2); 70 71 ctrl &= ~F_SDH30_CRES_O_DN; 72 sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2); 73 usleep_range(2500, 3000); 74 75 ctrl = sdhci_readl(host, F_SDH30_TUNING_SETTING); 76 ctrl |= F_SDH30_CMD_CHK_DIS; 77 sdhci_writel(host, ctrl, F_SDH30_TUNING_SETTING); 78 } 79 80 static unsigned int sdhci_milbeaut_get_min_clock(struct sdhci_host *host) 81 { 82 return F_SDH30_MIN_CLOCK; 83 } 84 85 static void sdhci_milbeaut_reset(struct sdhci_host *host, u8 mask) 86 { 87 struct f_sdhost_priv *priv = sdhci_priv(host); 88 u16 clk; 89 u32 ctl; 90 ktime_t timeout; 91 92 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); 93 clk = (clk & ~SDHCI_CLOCK_CARD_EN) | SDHCI_CLOCK_INT_EN; 94 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); 95 96 sdhci_reset(host, mask); 97 98 clk |= SDHCI_CLOCK_CARD_EN; 99 sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL); 100 101 timeout = ktime_add_ms(ktime_get(), 10); 102 while (1) { 103 bool timedout = ktime_after(ktime_get(), timeout); 104 105 clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); 106 if (clk & SDHCI_CLOCK_INT_STABLE) 107 break; 108 if (timedout) { 109 pr_err("%s: Internal clock never stabilised.\n", 110 mmc_hostname(host->mmc)); 111 sdhci_dumpregs(host); 112 return; 113 } 114 udelay(10); 115 } 116 117 if (priv->enable_cmd_dat_delay) { 118 ctl = sdhci_readl(host, F_SDH30_ESD_CONTROL); 119 ctl |= F_SDH30_CMD_DAT_DELAY; 120 sdhci_writel(host, ctl, F_SDH30_ESD_CONTROL); 121 } 122 } 123 124 static const struct sdhci_ops sdhci_milbeaut_ops = { 125 .voltage_switch = sdhci_milbeaut_soft_voltage_switch, 126 .get_min_clock = sdhci_milbeaut_get_min_clock, 127 .reset = sdhci_milbeaut_reset, 128 .set_clock = sdhci_set_clock, 129 .set_bus_width = sdhci_set_bus_width, 130 .set_uhs_signaling = sdhci_set_uhs_signaling, 131 .set_power = sdhci_set_power_and_bus_voltage, 132 }; 133 134 static void sdhci_milbeaut_bridge_reset(struct sdhci_host *host, 135 int reset_flag) 136 { 137 if (reset_flag) 138 sdhci_writel(host, 0, MLB_SOFT_RESET); 139 else 140 sdhci_writel(host, MLB_SOFT_RESET_RSTX, MLB_SOFT_RESET); 141 } 142 143 static void sdhci_milbeaut_bridge_init(struct sdhci_host *host, 144 int rate) 145 { 146 u32 val, clk; 147 148 /* IO_SDIO_CR_SET should be set while reset */ 149 val = sdhci_readl(host, MLB_CR_SET); 150 val &= ~(MLB_CR_SET_CR_TOCLKFREQ_MASK | MLB_CR_SET_CR_TOCLKUNIT | 151 MLB_CR_SET_CR_BCLKFREQ_MASK); 152 if (rate >= MLB_TOCLKFREQ_UNIT_THRES) { 153 clk = MLB_CAL_TOCLKFREQ_MHZ(rate); 154 clk = min_t(u32, MLB_TOCLKFREQ_MAX, clk); 155 val |= MLB_CR_SET_CR_TOCLKUNIT | 156 (clk << MLB_CR_SET_CR_TOCLKFREQ_SFT); 157 } else { 158 clk = MLB_CAL_TOCLKFREQ_KHZ(rate); 159 clk = min_t(u32, MLB_TOCLKFREQ_MAX, clk); 160 clk = max_t(u32, MLB_TOCLKFREQ_MIN, clk); 161 val |= clk << MLB_CR_SET_CR_TOCLKFREQ_SFT; 162 } 163 164 clk = MLB_CAL_BCLKFREQ(rate); 165 clk = min_t(u32, MLB_BCLKFREQ_MAX, clk); 166 clk = max_t(u32, MLB_BCLKFREQ_MIN, clk); 167 val |= clk << MLB_CR_SET_CR_BCLKFREQ_SFT; 168 val &= ~MLB_CR_SET_CR_RTUNTIMER_MASK; 169 sdhci_writel(host, val, MLB_CR_SET); 170 171 sdhci_writel(host, MLB_CDR_SET_CLK2POW16, MLB_CDR_SET); 172 173 sdhci_writel(host, MLB_WP_CD_LED_SET_LED_INV, MLB_WP_CD_LED_SET); 174 } 175 176 static void sdhci_milbeaut_vendor_init(struct sdhci_host *host) 177 { 178 struct f_sdhost_priv *priv = sdhci_priv(host); 179 u32 ctl; 180 181 ctl = sdhci_readl(host, F_SDH30_IO_CONTROL2); 182 ctl |= F_SDH30_CRES_O_DN; 183 sdhci_writel(host, ctl, F_SDH30_IO_CONTROL2); 184 ctl &= ~F_SDH30_MSEL_O_1_8; 185 sdhci_writel(host, ctl, F_SDH30_IO_CONTROL2); 186 ctl &= ~F_SDH30_CRES_O_DN; 187 sdhci_writel(host, ctl, F_SDH30_IO_CONTROL2); 188 189 ctl = sdhci_readw(host, F_SDH30_AHB_CONFIG); 190 ctl |= F_SDH30_SIN | F_SDH30_AHB_INCR_16 | F_SDH30_AHB_INCR_8 | 191 F_SDH30_AHB_INCR_4; 192 ctl &= ~(F_SDH30_AHB_BIGED | F_SDH30_BUSLOCK_EN); 193 sdhci_writew(host, ctl, F_SDH30_AHB_CONFIG); 194 195 if (priv->enable_cmd_dat_delay) { 196 ctl = sdhci_readl(host, F_SDH30_ESD_CONTROL); 197 ctl |= F_SDH30_CMD_DAT_DELAY; 198 sdhci_writel(host, ctl, F_SDH30_ESD_CONTROL); 199 } 200 } 201 202 static const struct of_device_id mlb_dt_ids[] = { 203 { 204 .compatible = "socionext,milbeaut-m10v-sdhci-3.0", 205 }, 206 { /* sentinel */ } 207 }; 208 MODULE_DEVICE_TABLE(of, mlb_dt_ids); 209 210 static void sdhci_milbeaut_init(struct sdhci_host *host) 211 { 212 struct f_sdhost_priv *priv = sdhci_priv(host); 213 int rate = clk_get_rate(priv->clk); 214 u16 ctl; 215 216 sdhci_milbeaut_bridge_reset(host, 0); 217 218 ctl = sdhci_readw(host, SDHCI_CLOCK_CONTROL); 219 ctl &= ~(SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_INT_EN); 220 sdhci_writew(host, ctl, SDHCI_CLOCK_CONTROL); 221 222 sdhci_milbeaut_bridge_reset(host, 1); 223 224 sdhci_milbeaut_bridge_init(host, rate); 225 sdhci_milbeaut_bridge_reset(host, 0); 226 227 sdhci_milbeaut_vendor_init(host); 228 } 229 230 static int sdhci_milbeaut_probe(struct platform_device *pdev) 231 { 232 struct sdhci_host *host; 233 struct device *dev = &pdev->dev; 234 int irq, ret = 0; 235 struct f_sdhost_priv *priv; 236 237 irq = platform_get_irq(pdev, 0); 238 if (irq < 0) 239 return irq; 240 241 host = sdhci_alloc_host(dev, sizeof(struct f_sdhost_priv)); 242 if (IS_ERR(host)) 243 return PTR_ERR(host); 244 245 priv = sdhci_priv(host); 246 priv->dev = dev; 247 248 host->quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC | 249 SDHCI_QUIRK_INVERTED_WRITE_PROTECT | 250 SDHCI_QUIRK_CLOCK_BEFORE_RESET | 251 SDHCI_QUIRK_DELAY_AFTER_POWER; 252 host->quirks2 = SDHCI_QUIRK2_SUPPORT_SINGLE | 253 SDHCI_QUIRK2_TUNING_WORK_AROUND | 254 SDHCI_QUIRK2_PRESET_VALUE_BROKEN; 255 256 priv->enable_cmd_dat_delay = device_property_read_bool(dev, 257 "fujitsu,cmd-dat-delay-select"); 258 259 ret = mmc_of_parse(host->mmc); 260 if (ret) 261 goto err; 262 263 platform_set_drvdata(pdev, host); 264 265 host->hw_name = "f_sdh30"; 266 host->ops = &sdhci_milbeaut_ops; 267 host->irq = irq; 268 269 host->ioaddr = devm_platform_ioremap_resource(pdev, 0); 270 if (IS_ERR(host->ioaddr)) { 271 ret = PTR_ERR(host->ioaddr); 272 goto err; 273 } 274 275 if (dev_of_node(dev)) { 276 sdhci_get_of_property(pdev); 277 278 priv->clk_iface = devm_clk_get(&pdev->dev, "iface"); 279 if (IS_ERR(priv->clk_iface)) { 280 ret = PTR_ERR(priv->clk_iface); 281 goto err; 282 } 283 284 ret = clk_prepare_enable(priv->clk_iface); 285 if (ret) 286 goto err; 287 288 priv->clk = devm_clk_get(&pdev->dev, "core"); 289 if (IS_ERR(priv->clk)) { 290 ret = PTR_ERR(priv->clk); 291 goto err_clk; 292 } 293 294 ret = clk_prepare_enable(priv->clk); 295 if (ret) 296 goto err_clk; 297 } 298 299 sdhci_milbeaut_init(host); 300 301 ret = sdhci_add_host(host); 302 if (ret) 303 goto err_add_host; 304 305 return 0; 306 307 err_add_host: 308 clk_disable_unprepare(priv->clk); 309 err_clk: 310 clk_disable_unprepare(priv->clk_iface); 311 err: 312 sdhci_free_host(host); 313 return ret; 314 } 315 316 static int sdhci_milbeaut_remove(struct platform_device *pdev) 317 { 318 struct sdhci_host *host = platform_get_drvdata(pdev); 319 struct f_sdhost_priv *priv = sdhci_priv(host); 320 321 sdhci_remove_host(host, readl(host->ioaddr + SDHCI_INT_STATUS) == 322 0xffffffff); 323 324 clk_disable_unprepare(priv->clk_iface); 325 clk_disable_unprepare(priv->clk); 326 327 sdhci_free_host(host); 328 platform_set_drvdata(pdev, NULL); 329 330 return 0; 331 } 332 333 static struct platform_driver sdhci_milbeaut_driver = { 334 .driver = { 335 .name = "sdhci-milbeaut", 336 .probe_type = PROBE_PREFER_ASYNCHRONOUS, 337 .of_match_table = of_match_ptr(mlb_dt_ids), 338 }, 339 .probe = sdhci_milbeaut_probe, 340 .remove = sdhci_milbeaut_remove, 341 }; 342 343 module_platform_driver(sdhci_milbeaut_driver); 344 345 MODULE_DESCRIPTION("MILBEAUT SD Card Controller driver"); 346 MODULE_AUTHOR("Takao Orito <orito.takao@socionext.com>"); 347 MODULE_LICENSE("GPL v2"); 348 MODULE_ALIAS("platform:sdhci-milbeaut"); 349