1 // SPDX-License-Identifier: GPL-2.0
2 /*
3  * Copyright (C) 2013 - 2015 Fujitsu Semiconductor, Ltd
4  *              Vincent Yang <vincent.yang@tw.fujitsu.com>
5  * Copyright (C) 2015 Linaro Ltd  Andy Green <andy.green@linaro.org>
6  * Copyright (C) 2019 Socionext Inc.
7  *              Takao Orito <orito.takao@socionext.com>
8  */
9 
10 #include <linux/bits.h>
11 #include <linux/clk.h>
12 #include <linux/delay.h>
13 #include <linux/err.h>
14 #include <linux/gpio/consumer.h>
15 #include <linux/module.h>
16 #include <linux/of.h>
17 #include <linux/property.h>
18 
19 #include "sdhci-pltfm.h"
20 #include "sdhci_f_sdh30.h"
21 
22 /* milbeaut bridge controller register */
23 #define MLB_SOFT_RESET		0x0200
24 #define  MLB_SOFT_RESET_RSTX		BIT(0)
25 
26 #define MLB_WP_CD_LED_SET	0x0210
27 #define  MLB_WP_CD_LED_SET_LED_INV  BIT(2)
28 
29 #define MLB_CR_SET			0x0220
30 #define  MLB_CR_SET_CR_TOCLKUNIT       BIT(24)
31 #define  MLB_CR_SET_CR_TOCLKFREQ_SFT   (16)
32 #define  MLB_CR_SET_CR_TOCLKFREQ_MASK  (0x3F << MLB_CR_SET_CR_TOCLKFREQ_SFT)
33 #define  MLB_CR_SET_CR_BCLKFREQ_SFT    (8)
34 #define  MLB_CR_SET_CR_BCLKFREQ_MASK   (0xFF << MLB_CR_SET_CR_BCLKFREQ_SFT)
35 #define  MLB_CR_SET_CR_RTUNTIMER_SFT   (4)
36 #define  MLB_CR_SET_CR_RTUNTIMER_MASK  (0xF << MLB_CR_SET_CR_RTUNTIMER_SFT)
37 
38 #define MLB_SD_TOCLK_I_DIV  16
39 #define MLB_TOCLKFREQ_UNIT_THRES    16000000
40 #define MLB_CAL_TOCLKFREQ_MHZ(rate) (rate / MLB_SD_TOCLK_I_DIV / 1000000)
41 #define MLB_CAL_TOCLKFREQ_KHZ(rate) (rate / MLB_SD_TOCLK_I_DIV / 1000)
42 #define MLB_TOCLKFREQ_MAX   63
43 #define MLB_TOCLKFREQ_MIN    1
44 
45 #define MLB_SD_BCLK_I_DIV   4
46 #define MLB_CAL_BCLKFREQ(rate)  (rate / MLB_SD_BCLK_I_DIV / 1000000)
47 #define MLB_BCLKFREQ_MAX        255
48 #define MLB_BCLKFREQ_MIN          1
49 
50 #define MLB_CDR_SET			0x0230
51 #define MLB_CDR_SET_CLK2POW16	3
52 
53 struct f_sdhost_priv {
54 	struct clk *clk_iface;
55 	struct clk *clk;
56 	struct device *dev;
57 	bool enable_cmd_dat_delay;
58 };
59 
60 static void sdhci_milbeaut_soft_voltage_switch(struct sdhci_host *host)
61 {
62 	u32 ctrl = 0;
63 
64 	usleep_range(2500, 3000);
65 	ctrl = sdhci_readl(host, F_SDH30_IO_CONTROL2);
66 	ctrl |= F_SDH30_CRES_O_DN;
67 	sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2);
68 	ctrl |= F_SDH30_MSEL_O_1_8;
69 	sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2);
70 
71 	ctrl &= ~F_SDH30_CRES_O_DN;
72 	sdhci_writel(host, ctrl, F_SDH30_IO_CONTROL2);
73 	usleep_range(2500, 3000);
74 
75 	ctrl = sdhci_readl(host, F_SDH30_TUNING_SETTING);
76 	ctrl |= F_SDH30_CMD_CHK_DIS;
77 	sdhci_writel(host, ctrl, F_SDH30_TUNING_SETTING);
78 }
79 
80 static unsigned int sdhci_milbeaut_get_min_clock(struct sdhci_host *host)
81 {
82 	return F_SDH30_MIN_CLOCK;
83 }
84 
85 static void sdhci_milbeaut_reset(struct sdhci_host *host, u8 mask)
86 {
87 	struct f_sdhost_priv *priv = sdhci_priv(host);
88 	u16 clk;
89 	u32 ctl;
90 	ktime_t timeout;
91 
92 	clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
93 	clk = (clk & ~SDHCI_CLOCK_CARD_EN) | SDHCI_CLOCK_INT_EN;
94 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
95 
96 	sdhci_reset(host, mask);
97 
98 	clk |= SDHCI_CLOCK_CARD_EN;
99 	sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
100 
101 	timeout = ktime_add_ms(ktime_get(), 10);
102 	while (1) {
103 		bool timedout = ktime_after(ktime_get(), timeout);
104 
105 		clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
106 		if (clk & SDHCI_CLOCK_INT_STABLE)
107 			break;
108 		if (timedout) {
109 			pr_err("%s: Internal clock never stabilised.\n",
110 				mmc_hostname(host->mmc));
111 			sdhci_dumpregs(host);
112 			return;
113 		}
114 		udelay(10);
115 	}
116 
117 	if (priv->enable_cmd_dat_delay) {
118 		ctl = sdhci_readl(host, F_SDH30_ESD_CONTROL);
119 		ctl |= F_SDH30_CMD_DAT_DELAY;
120 		sdhci_writel(host, ctl, F_SDH30_ESD_CONTROL);
121 	}
122 }
123 
124 static const struct sdhci_ops sdhci_milbeaut_ops = {
125 	.voltage_switch = sdhci_milbeaut_soft_voltage_switch,
126 	.get_min_clock = sdhci_milbeaut_get_min_clock,
127 	.reset = sdhci_milbeaut_reset,
128 	.set_clock = sdhci_set_clock,
129 	.set_bus_width = sdhci_set_bus_width,
130 	.set_uhs_signaling = sdhci_set_uhs_signaling,
131 	.set_power = sdhci_set_power_and_bus_voltage,
132 };
133 
134 static void sdhci_milbeaut_bridge_reset(struct sdhci_host *host,
135 						int reset_flag)
136 {
137 	if (reset_flag)
138 		sdhci_writel(host, 0, MLB_SOFT_RESET);
139 	else
140 		sdhci_writel(host, MLB_SOFT_RESET_RSTX, MLB_SOFT_RESET);
141 }
142 
143 static void sdhci_milbeaut_bridge_init(struct sdhci_host *host,
144 						int rate)
145 {
146 	u32 val, clk;
147 
148 	/* IO_SDIO_CR_SET should be set while reset */
149 	val = sdhci_readl(host, MLB_CR_SET);
150 	val &= ~(MLB_CR_SET_CR_TOCLKFREQ_MASK | MLB_CR_SET_CR_TOCLKUNIT |
151 			MLB_CR_SET_CR_BCLKFREQ_MASK);
152 	if (rate >= MLB_TOCLKFREQ_UNIT_THRES) {
153 		clk = MLB_CAL_TOCLKFREQ_MHZ(rate);
154 		clk = min_t(u32, MLB_TOCLKFREQ_MAX, clk);
155 		val |= MLB_CR_SET_CR_TOCLKUNIT |
156 			(clk << MLB_CR_SET_CR_TOCLKFREQ_SFT);
157 	} else {
158 		clk = MLB_CAL_TOCLKFREQ_KHZ(rate);
159 		clk = min_t(u32, MLB_TOCLKFREQ_MAX, clk);
160 		clk = max_t(u32, MLB_TOCLKFREQ_MIN, clk);
161 		val |= clk << MLB_CR_SET_CR_TOCLKFREQ_SFT;
162 	}
163 
164 	clk = MLB_CAL_BCLKFREQ(rate);
165 	clk = min_t(u32, MLB_BCLKFREQ_MAX, clk);
166 	clk = max_t(u32, MLB_BCLKFREQ_MIN, clk);
167 	val |=  clk << MLB_CR_SET_CR_BCLKFREQ_SFT;
168 	val &= ~MLB_CR_SET_CR_RTUNTIMER_MASK;
169 	sdhci_writel(host, val, MLB_CR_SET);
170 
171 	sdhci_writel(host, MLB_CDR_SET_CLK2POW16, MLB_CDR_SET);
172 
173 	sdhci_writel(host, MLB_WP_CD_LED_SET_LED_INV, MLB_WP_CD_LED_SET);
174 }
175 
176 static void sdhci_milbeaut_vendor_init(struct sdhci_host *host)
177 {
178 	struct f_sdhost_priv *priv = sdhci_priv(host);
179 	u32 ctl;
180 
181 	ctl = sdhci_readl(host, F_SDH30_IO_CONTROL2);
182 	ctl |= F_SDH30_CRES_O_DN;
183 	sdhci_writel(host, ctl, F_SDH30_IO_CONTROL2);
184 	ctl &= ~F_SDH30_MSEL_O_1_8;
185 	sdhci_writel(host, ctl, F_SDH30_IO_CONTROL2);
186 	ctl &= ~F_SDH30_CRES_O_DN;
187 	sdhci_writel(host, ctl, F_SDH30_IO_CONTROL2);
188 
189 	ctl = sdhci_readw(host, F_SDH30_AHB_CONFIG);
190 	ctl |= F_SDH30_SIN | F_SDH30_AHB_INCR_16 | F_SDH30_AHB_INCR_8 |
191 	       F_SDH30_AHB_INCR_4;
192 	ctl &= ~(F_SDH30_AHB_BIGED | F_SDH30_BUSLOCK_EN);
193 	sdhci_writew(host, ctl, F_SDH30_AHB_CONFIG);
194 
195 	if (priv->enable_cmd_dat_delay) {
196 		ctl = sdhci_readl(host, F_SDH30_ESD_CONTROL);
197 		ctl |= F_SDH30_CMD_DAT_DELAY;
198 		sdhci_writel(host, ctl, F_SDH30_ESD_CONTROL);
199 	}
200 }
201 
202 static const struct of_device_id mlb_dt_ids[] = {
203 	{
204 		.compatible = "socionext,milbeaut-m10v-sdhci-3.0",
205 	},
206 	{ /* sentinel */ }
207 };
208 MODULE_DEVICE_TABLE(of, mlb_dt_ids);
209 
210 static void sdhci_milbeaut_init(struct sdhci_host *host)
211 {
212 	struct f_sdhost_priv *priv = sdhci_priv(host);
213 	int rate = clk_get_rate(priv->clk);
214 	u16 ctl;
215 
216 	sdhci_milbeaut_bridge_reset(host, 0);
217 
218 	ctl = sdhci_readw(host, SDHCI_CLOCK_CONTROL);
219 	ctl &= ~(SDHCI_CLOCK_CARD_EN | SDHCI_CLOCK_INT_EN);
220 	sdhci_writew(host, ctl, SDHCI_CLOCK_CONTROL);
221 
222 	sdhci_milbeaut_bridge_reset(host, 1);
223 
224 	sdhci_milbeaut_bridge_init(host, rate);
225 	sdhci_milbeaut_bridge_reset(host, 0);
226 
227 	sdhci_milbeaut_vendor_init(host);
228 }
229 
230 static int sdhci_milbeaut_probe(struct platform_device *pdev)
231 {
232 	struct sdhci_host *host;
233 	struct device *dev = &pdev->dev;
234 	int irq, ret = 0;
235 	struct f_sdhost_priv *priv;
236 
237 	irq = platform_get_irq(pdev, 0);
238 	if (irq < 0)
239 		return irq;
240 
241 	host = sdhci_alloc_host(dev, sizeof(struct f_sdhost_priv));
242 	if (IS_ERR(host))
243 		return PTR_ERR(host);
244 
245 	priv = sdhci_priv(host);
246 	priv->dev = dev;
247 
248 	host->quirks = SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC |
249 			   SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
250 			   SDHCI_QUIRK_CLOCK_BEFORE_RESET |
251 			   SDHCI_QUIRK_DELAY_AFTER_POWER;
252 	host->quirks2 = SDHCI_QUIRK2_SUPPORT_SINGLE |
253 			SDHCI_QUIRK2_TUNING_WORK_AROUND |
254 			SDHCI_QUIRK2_PRESET_VALUE_BROKEN;
255 
256 	priv->enable_cmd_dat_delay = device_property_read_bool(dev,
257 						"fujitsu,cmd-dat-delay-select");
258 
259 	ret = mmc_of_parse(host->mmc);
260 	if (ret)
261 		goto err;
262 
263 	platform_set_drvdata(pdev, host);
264 
265 	host->hw_name = "f_sdh30";
266 	host->ops = &sdhci_milbeaut_ops;
267 	host->irq = irq;
268 
269 	host->ioaddr = devm_platform_ioremap_resource(pdev, 0);
270 	if (IS_ERR(host->ioaddr)) {
271 		ret = PTR_ERR(host->ioaddr);
272 		goto err;
273 	}
274 
275 	if (dev_of_node(dev)) {
276 		sdhci_get_of_property(pdev);
277 
278 		priv->clk_iface = devm_clk_get(&pdev->dev, "iface");
279 		if (IS_ERR(priv->clk_iface)) {
280 			ret = PTR_ERR(priv->clk_iface);
281 			goto err;
282 		}
283 
284 		ret = clk_prepare_enable(priv->clk_iface);
285 		if (ret)
286 			goto err;
287 
288 		priv->clk = devm_clk_get(&pdev->dev, "core");
289 		if (IS_ERR(priv->clk)) {
290 			ret = PTR_ERR(priv->clk);
291 			goto err_clk;
292 		}
293 
294 		ret = clk_prepare_enable(priv->clk);
295 		if (ret)
296 			goto err_clk;
297 	}
298 
299 	sdhci_milbeaut_init(host);
300 
301 	ret = sdhci_add_host(host);
302 	if (ret)
303 		goto err_add_host;
304 
305 	return 0;
306 
307 err_add_host:
308 	clk_disable_unprepare(priv->clk);
309 err_clk:
310 	clk_disable_unprepare(priv->clk_iface);
311 err:
312 	sdhci_free_host(host);
313 	return ret;
314 }
315 
316 static int sdhci_milbeaut_remove(struct platform_device *pdev)
317 {
318 	struct sdhci_host *host = platform_get_drvdata(pdev);
319 	struct f_sdhost_priv *priv = sdhci_priv(host);
320 
321 	sdhci_remove_host(host, readl(host->ioaddr + SDHCI_INT_STATUS) ==
322 			  0xffffffff);
323 
324 	clk_disable_unprepare(priv->clk_iface);
325 	clk_disable_unprepare(priv->clk);
326 
327 	sdhci_free_host(host);
328 	platform_set_drvdata(pdev, NULL);
329 
330 	return 0;
331 }
332 
333 static struct platform_driver sdhci_milbeaut_driver = {
334 	.driver = {
335 		.name = "sdhci-milbeaut",
336 		.of_match_table = of_match_ptr(mlb_dt_ids),
337 	},
338 	.probe	= sdhci_milbeaut_probe,
339 	.remove	= sdhci_milbeaut_remove,
340 };
341 
342 module_platform_driver(sdhci_milbeaut_driver);
343 
344 MODULE_DESCRIPTION("MILBEAUT SD Card Controller driver");
345 MODULE_AUTHOR("Takao Orito <orito.takao@socionext.com>");
346 MODULE_LICENSE("GPL v2");
347 MODULE_ALIAS("platform:sdhci-milbeaut");
348