1 // SPDX-License-Identifier: GPL-2.0-only 2 // Copyright (C) 2014 Broadcom Corporation 3 4 /* 5 * iProc SDHCI platform driver 6 */ 7 8 #include <linux/acpi.h> 9 #include <linux/delay.h> 10 #include <linux/module.h> 11 #include <linux/mmc/host.h> 12 #include <linux/of.h> 13 #include <linux/of_device.h> 14 #include "sdhci-pltfm.h" 15 16 struct sdhci_iproc_data { 17 const struct sdhci_pltfm_data *pdata; 18 u32 caps; 19 u32 caps1; 20 u32 mmc_caps; 21 bool missing_caps; 22 }; 23 24 struct sdhci_iproc_host { 25 const struct sdhci_iproc_data *data; 26 u32 shadow_cmd; 27 u32 shadow_blk; 28 bool is_cmd_shadowed; 29 bool is_blk_shadowed; 30 }; 31 32 #define REG_OFFSET_IN_BITS(reg) ((reg) << 3 & 0x18) 33 34 static inline u32 sdhci_iproc_readl(struct sdhci_host *host, int reg) 35 { 36 u32 val = readl(host->ioaddr + reg); 37 38 pr_debug("%s: readl [0x%02x] 0x%08x\n", 39 mmc_hostname(host->mmc), reg, val); 40 return val; 41 } 42 43 static u16 sdhci_iproc_readw(struct sdhci_host *host, int reg) 44 { 45 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 46 struct sdhci_iproc_host *iproc_host = sdhci_pltfm_priv(pltfm_host); 47 u32 val; 48 u16 word; 49 50 if ((reg == SDHCI_TRANSFER_MODE) && iproc_host->is_cmd_shadowed) { 51 /* Get the saved transfer mode */ 52 val = iproc_host->shadow_cmd; 53 } else if ((reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) && 54 iproc_host->is_blk_shadowed) { 55 /* Get the saved block info */ 56 val = iproc_host->shadow_blk; 57 } else { 58 val = sdhci_iproc_readl(host, (reg & ~3)); 59 } 60 word = val >> REG_OFFSET_IN_BITS(reg) & 0xffff; 61 return word; 62 } 63 64 static u8 sdhci_iproc_readb(struct sdhci_host *host, int reg) 65 { 66 u32 val = sdhci_iproc_readl(host, (reg & ~3)); 67 u8 byte = val >> REG_OFFSET_IN_BITS(reg) & 0xff; 68 return byte; 69 } 70 71 static inline void sdhci_iproc_writel(struct sdhci_host *host, u32 val, int reg) 72 { 73 pr_debug("%s: writel [0x%02x] 0x%08x\n", 74 mmc_hostname(host->mmc), reg, val); 75 76 writel(val, host->ioaddr + reg); 77 78 if (host->clock <= 400000) { 79 /* Round up to micro-second four SD clock delay */ 80 if (host->clock) 81 udelay((4 * 1000000 + host->clock - 1) / host->clock); 82 else 83 udelay(10); 84 } 85 } 86 87 /* 88 * The Arasan has a bugette whereby it may lose the content of successive 89 * writes to the same register that are within two SD-card clock cycles of 90 * each other (a clock domain crossing problem). The data 91 * register does not have this problem, which is just as well - otherwise we'd 92 * have to nobble the DMA engine too. 93 * 94 * This wouldn't be a problem with the code except that we can only write the 95 * controller with 32-bit writes. So two different 16-bit registers are 96 * written back to back creates the problem. 97 * 98 * In reality, this only happens when SDHCI_BLOCK_SIZE and SDHCI_BLOCK_COUNT 99 * are written followed by SDHCI_TRANSFER_MODE and SDHCI_COMMAND. 100 * The BLOCK_SIZE and BLOCK_COUNT are meaningless until a command issued so 101 * the work around can be further optimized. We can keep shadow values of 102 * BLOCK_SIZE, BLOCK_COUNT, and TRANSFER_MODE until a COMMAND is issued. 103 * Then, write the BLOCK_SIZE+BLOCK_COUNT in a single 32-bit write followed 104 * by the TRANSFER+COMMAND in another 32-bit write. 105 */ 106 static void sdhci_iproc_writew(struct sdhci_host *host, u16 val, int reg) 107 { 108 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 109 struct sdhci_iproc_host *iproc_host = sdhci_pltfm_priv(pltfm_host); 110 u32 word_shift = REG_OFFSET_IN_BITS(reg); 111 u32 mask = 0xffff << word_shift; 112 u32 oldval, newval; 113 114 if (reg == SDHCI_COMMAND) { 115 /* Write the block now as we are issuing a command */ 116 if (iproc_host->is_blk_shadowed) { 117 sdhci_iproc_writel(host, iproc_host->shadow_blk, 118 SDHCI_BLOCK_SIZE); 119 iproc_host->is_blk_shadowed = false; 120 } 121 oldval = iproc_host->shadow_cmd; 122 iproc_host->is_cmd_shadowed = false; 123 } else if ((reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) && 124 iproc_host->is_blk_shadowed) { 125 /* Block size and count are stored in shadow reg */ 126 oldval = iproc_host->shadow_blk; 127 } else { 128 /* Read reg, all other registers are not shadowed */ 129 oldval = sdhci_iproc_readl(host, (reg & ~3)); 130 } 131 newval = (oldval & ~mask) | (val << word_shift); 132 133 if (reg == SDHCI_TRANSFER_MODE) { 134 /* Save the transfer mode until the command is issued */ 135 iproc_host->shadow_cmd = newval; 136 iproc_host->is_cmd_shadowed = true; 137 } else if (reg == SDHCI_BLOCK_SIZE || reg == SDHCI_BLOCK_COUNT) { 138 /* Save the block info until the command is issued */ 139 iproc_host->shadow_blk = newval; 140 iproc_host->is_blk_shadowed = true; 141 } else { 142 /* Command or other regular 32-bit write */ 143 sdhci_iproc_writel(host, newval, reg & ~3); 144 } 145 } 146 147 static void sdhci_iproc_writeb(struct sdhci_host *host, u8 val, int reg) 148 { 149 u32 oldval = sdhci_iproc_readl(host, (reg & ~3)); 150 u32 byte_shift = REG_OFFSET_IN_BITS(reg); 151 u32 mask = 0xff << byte_shift; 152 u32 newval = (oldval & ~mask) | (val << byte_shift); 153 154 sdhci_iproc_writel(host, newval, reg & ~3); 155 } 156 157 static unsigned int sdhci_iproc_get_max_clock(struct sdhci_host *host) 158 { 159 struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); 160 161 if (pltfm_host->clk) 162 return sdhci_pltfm_clk_get_max_clock(host); 163 else 164 return pltfm_host->clock; 165 } 166 167 /* 168 * There is a known bug on BCM2711's SDHCI core integration where the 169 * controller will hang when the difference between the core clock and the bus 170 * clock is too great. Specifically this can be reproduced under the following 171 * conditions: 172 * 173 * - No SD card plugged in, polling thread is running, probing cards at 174 * 100 kHz. 175 * - BCM2711's core clock configured at 500MHz or more 176 * 177 * So we set 200kHz as the minimum clock frequency available for that SoC. 178 */ 179 static unsigned int sdhci_iproc_bcm2711_get_min_clock(struct sdhci_host *host) 180 { 181 return 200000; 182 } 183 184 static const struct sdhci_ops sdhci_iproc_ops = { 185 .set_clock = sdhci_set_clock, 186 .get_max_clock = sdhci_iproc_get_max_clock, 187 .set_bus_width = sdhci_set_bus_width, 188 .reset = sdhci_reset, 189 .set_uhs_signaling = sdhci_set_uhs_signaling, 190 }; 191 192 static const struct sdhci_ops sdhci_iproc_32only_ops = { 193 .read_l = sdhci_iproc_readl, 194 .read_w = sdhci_iproc_readw, 195 .read_b = sdhci_iproc_readb, 196 .write_l = sdhci_iproc_writel, 197 .write_w = sdhci_iproc_writew, 198 .write_b = sdhci_iproc_writeb, 199 .set_clock = sdhci_set_clock, 200 .get_max_clock = sdhci_iproc_get_max_clock, 201 .set_bus_width = sdhci_set_bus_width, 202 .reset = sdhci_reset, 203 .set_uhs_signaling = sdhci_set_uhs_signaling, 204 }; 205 206 static const struct sdhci_pltfm_data sdhci_iproc_cygnus_pltfm_data = { 207 .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | 208 SDHCI_QUIRK_NO_HISPD_BIT, 209 .quirks2 = SDHCI_QUIRK2_ACMD23_BROKEN | SDHCI_QUIRK2_HOST_OFF_CARD_ON, 210 .ops = &sdhci_iproc_32only_ops, 211 }; 212 213 static const struct sdhci_iproc_data iproc_cygnus_data = { 214 .pdata = &sdhci_iproc_cygnus_pltfm_data, 215 .caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT) 216 & SDHCI_MAX_BLOCK_MASK) | 217 SDHCI_CAN_VDD_330 | 218 SDHCI_CAN_VDD_180 | 219 SDHCI_CAN_DO_SUSPEND | 220 SDHCI_CAN_DO_HISPD | 221 SDHCI_CAN_DO_ADMA2 | 222 SDHCI_CAN_DO_SDMA, 223 .caps1 = SDHCI_DRIVER_TYPE_C | 224 SDHCI_DRIVER_TYPE_D | 225 SDHCI_SUPPORT_DDR50, 226 .mmc_caps = MMC_CAP_1_8V_DDR, 227 }; 228 229 static const struct sdhci_pltfm_data sdhci_iproc_pltfm_data = { 230 .quirks = SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | 231 SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12 | 232 SDHCI_QUIRK_NO_HISPD_BIT, 233 .quirks2 = SDHCI_QUIRK2_ACMD23_BROKEN, 234 .ops = &sdhci_iproc_ops, 235 }; 236 237 static const struct sdhci_iproc_data iproc_data = { 238 .pdata = &sdhci_iproc_pltfm_data, 239 .caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT) 240 & SDHCI_MAX_BLOCK_MASK) | 241 SDHCI_CAN_VDD_330 | 242 SDHCI_CAN_VDD_180 | 243 SDHCI_CAN_DO_SUSPEND | 244 SDHCI_CAN_DO_HISPD | 245 SDHCI_CAN_DO_ADMA2 | 246 SDHCI_CAN_DO_SDMA, 247 .caps1 = SDHCI_DRIVER_TYPE_C | 248 SDHCI_DRIVER_TYPE_D | 249 SDHCI_SUPPORT_DDR50, 250 }; 251 252 static const struct sdhci_pltfm_data sdhci_bcm2835_pltfm_data = { 253 .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION | 254 SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | 255 SDHCI_QUIRK_NO_HISPD_BIT, 256 .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, 257 .ops = &sdhci_iproc_32only_ops, 258 }; 259 260 static const struct sdhci_iproc_data bcm2835_data = { 261 .pdata = &sdhci_bcm2835_pltfm_data, 262 .caps = ((0x1 << SDHCI_MAX_BLOCK_SHIFT) 263 & SDHCI_MAX_BLOCK_MASK) | 264 SDHCI_CAN_VDD_330 | 265 SDHCI_CAN_DO_HISPD, 266 .caps1 = SDHCI_DRIVER_TYPE_A | 267 SDHCI_DRIVER_TYPE_C, 268 .mmc_caps = 0x00000000, 269 .missing_caps = true, 270 }; 271 272 static const struct sdhci_ops sdhci_iproc_bcm2711_ops = { 273 .read_l = sdhci_iproc_readl, 274 .read_w = sdhci_iproc_readw, 275 .read_b = sdhci_iproc_readb, 276 .write_l = sdhci_iproc_writel, 277 .write_w = sdhci_iproc_writew, 278 .write_b = sdhci_iproc_writeb, 279 .set_clock = sdhci_set_clock, 280 .set_power = sdhci_set_power_and_bus_voltage, 281 .get_max_clock = sdhci_iproc_get_max_clock, 282 .get_min_clock = sdhci_iproc_bcm2711_get_min_clock, 283 .set_bus_width = sdhci_set_bus_width, 284 .reset = sdhci_reset, 285 .set_uhs_signaling = sdhci_set_uhs_signaling, 286 }; 287 288 static const struct sdhci_pltfm_data sdhci_bcm2711_pltfm_data = { 289 .quirks = SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12, 290 .ops = &sdhci_iproc_bcm2711_ops, 291 }; 292 293 static const struct sdhci_iproc_data bcm2711_data = { 294 .pdata = &sdhci_bcm2711_pltfm_data, 295 .mmc_caps = MMC_CAP_3_3V_DDR, 296 }; 297 298 static const struct sdhci_pltfm_data sdhci_bcm7211a0_pltfm_data = { 299 .quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | 300 SDHCI_QUIRK_BROKEN_DMA | 301 SDHCI_QUIRK_BROKEN_ADMA, 302 .ops = &sdhci_iproc_ops, 303 }; 304 305 #define BCM7211A0_BASE_CLK_MHZ 100 306 static const struct sdhci_iproc_data bcm7211a0_data = { 307 .pdata = &sdhci_bcm7211a0_pltfm_data, 308 .caps = ((BCM7211A0_BASE_CLK_MHZ / 2) << SDHCI_TIMEOUT_CLK_SHIFT) | 309 (BCM7211A0_BASE_CLK_MHZ << SDHCI_CLOCK_BASE_SHIFT) | 310 ((0x2 << SDHCI_MAX_BLOCK_SHIFT) 311 & SDHCI_MAX_BLOCK_MASK) | 312 SDHCI_CAN_VDD_330 | 313 SDHCI_CAN_VDD_180 | 314 SDHCI_CAN_DO_SUSPEND | 315 SDHCI_CAN_DO_HISPD, 316 .caps1 = SDHCI_DRIVER_TYPE_C | 317 SDHCI_DRIVER_TYPE_D, 318 .missing_caps = true, 319 }; 320 321 static const struct of_device_id sdhci_iproc_of_match[] = { 322 { .compatible = "brcm,bcm2835-sdhci", .data = &bcm2835_data }, 323 { .compatible = "brcm,bcm2711-emmc2", .data = &bcm2711_data }, 324 { .compatible = "brcm,sdhci-iproc-cygnus", .data = &iproc_cygnus_data}, 325 { .compatible = "brcm,sdhci-iproc", .data = &iproc_data }, 326 { .compatible = "brcm,bcm7211a0-sdhci", .data = &bcm7211a0_data }, 327 { } 328 }; 329 MODULE_DEVICE_TABLE(of, sdhci_iproc_of_match); 330 331 #ifdef CONFIG_ACPI 332 /* 333 * This is a duplicate of bcm2835_(pltfrm_)data without caps quirks 334 * which are provided by the ACPI table. 335 */ 336 static const struct sdhci_pltfm_data sdhci_bcm_arasan_data = { 337 .quirks = SDHCI_QUIRK_BROKEN_CARD_DETECTION | 338 SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | 339 SDHCI_QUIRK_NO_HISPD_BIT, 340 .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, 341 .ops = &sdhci_iproc_32only_ops, 342 }; 343 344 static const struct sdhci_iproc_data bcm_arasan_data = { 345 .pdata = &sdhci_bcm_arasan_data, 346 }; 347 348 static const struct acpi_device_id sdhci_iproc_acpi_ids[] = { 349 { .id = "BRCM5871", .driver_data = (kernel_ulong_t)&iproc_cygnus_data }, 350 { .id = "BRCM5872", .driver_data = (kernel_ulong_t)&iproc_data }, 351 { .id = "BCM2847", .driver_data = (kernel_ulong_t)&bcm_arasan_data }, 352 { .id = "BRCME88C", .driver_data = (kernel_ulong_t)&bcm2711_data }, 353 { /* sentinel */ } 354 }; 355 MODULE_DEVICE_TABLE(acpi, sdhci_iproc_acpi_ids); 356 #endif 357 358 static int sdhci_iproc_probe(struct platform_device *pdev) 359 { 360 struct device *dev = &pdev->dev; 361 const struct sdhci_iproc_data *iproc_data = NULL; 362 struct sdhci_host *host; 363 struct sdhci_iproc_host *iproc_host; 364 struct sdhci_pltfm_host *pltfm_host; 365 int ret; 366 367 iproc_data = device_get_match_data(dev); 368 if (!iproc_data) 369 return -ENODEV; 370 371 host = sdhci_pltfm_init(pdev, iproc_data->pdata, sizeof(*iproc_host)); 372 if (IS_ERR(host)) 373 return PTR_ERR(host); 374 375 pltfm_host = sdhci_priv(host); 376 iproc_host = sdhci_pltfm_priv(pltfm_host); 377 378 iproc_host->data = iproc_data; 379 380 ret = mmc_of_parse(host->mmc); 381 if (ret) 382 goto err; 383 384 sdhci_get_property(pdev); 385 386 host->mmc->caps |= iproc_host->data->mmc_caps; 387 388 if (dev->of_node) { 389 pltfm_host->clk = devm_clk_get(dev, NULL); 390 if (IS_ERR(pltfm_host->clk)) { 391 ret = PTR_ERR(pltfm_host->clk); 392 goto err; 393 } 394 ret = clk_prepare_enable(pltfm_host->clk); 395 if (ret) { 396 dev_err(dev, "failed to enable host clk\n"); 397 goto err; 398 } 399 } 400 401 if (iproc_host->data->missing_caps) { 402 __sdhci_read_caps(host, NULL, 403 &iproc_host->data->caps, 404 &iproc_host->data->caps1); 405 } 406 407 ret = sdhci_add_host(host); 408 if (ret) 409 goto err_clk; 410 411 return 0; 412 413 err_clk: 414 if (dev->of_node) 415 clk_disable_unprepare(pltfm_host->clk); 416 err: 417 sdhci_pltfm_free(pdev); 418 return ret; 419 } 420 421 static void sdhci_iproc_shutdown(struct platform_device *pdev) 422 { 423 sdhci_pltfm_suspend(&pdev->dev); 424 } 425 426 static struct platform_driver sdhci_iproc_driver = { 427 .driver = { 428 .name = "sdhci-iproc", 429 .probe_type = PROBE_PREFER_ASYNCHRONOUS, 430 .of_match_table = sdhci_iproc_of_match, 431 .acpi_match_table = ACPI_PTR(sdhci_iproc_acpi_ids), 432 .pm = &sdhci_pltfm_pmops, 433 }, 434 .probe = sdhci_iproc_probe, 435 .remove = sdhci_pltfm_unregister, 436 .shutdown = sdhci_iproc_shutdown, 437 }; 438 module_platform_driver(sdhci_iproc_driver); 439 440 MODULE_AUTHOR("Broadcom"); 441 MODULE_DESCRIPTION("IPROC SDHCI driver"); 442 MODULE_LICENSE("GPL v2"); 443