1 /* 2 * Copyright (C) 2013 Broadcom Corporation 3 * 4 * This program is free software; you can redistribute it and/or 5 * modify it under the terms of the GNU General Public License as 6 * published by the Free Software Foundation version 2. 7 * 8 * This program is distributed "as is" WITHOUT ANY WARRANTY of any 9 * kind, whether express or implied; without even the implied warranty 10 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 11 * GNU General Public License for more details. 12 */ 13 14 #include <linux/kernel.h> 15 #include <linux/module.h> 16 #include <linux/delay.h> 17 #include <linux/highmem.h> 18 #include <linux/platform_device.h> 19 #include <linux/mmc/host.h> 20 #include <linux/io.h> 21 #include <linux/gpio.h> 22 #include <linux/clk.h> 23 #include <linux/regulator/consumer.h> 24 #include <linux/of.h> 25 #include <linux/of_device.h> 26 #include <linux/of_gpio.h> 27 #include <linux/mmc/slot-gpio.h> 28 29 #include "sdhci-pltfm.h" 30 #include "sdhci.h" 31 32 #define SDHCI_SOFT_RESET 0x01000000 33 #define KONA_SDHOST_CORECTRL 0x8000 34 #define KONA_SDHOST_CD_PINCTRL 0x00000008 35 #define KONA_SDHOST_STOP_HCLK 0x00000004 36 #define KONA_SDHOST_RESET 0x00000002 37 #define KONA_SDHOST_EN 0x00000001 38 39 #define KONA_SDHOST_CORESTAT 0x8004 40 #define KONA_SDHOST_WP 0x00000002 41 #define KONA_SDHOST_CD_SW 0x00000001 42 43 #define KONA_SDHOST_COREIMR 0x8008 44 #define KONA_SDHOST_IP 0x00000001 45 46 #define KONA_SDHOST_COREISR 0x800C 47 #define KONA_SDHOST_COREIMSR 0x8010 48 #define KONA_SDHOST_COREDBG1 0x8014 49 #define KONA_SDHOST_COREGPO_MASK 0x8018 50 51 #define SD_DETECT_GPIO_DEBOUNCE_128MS 128 52 53 #define KONA_MMC_AUTOSUSPEND_DELAY (50) 54 55 struct sdhci_bcm_kona_dev { 56 struct mutex write_lock; /* protect back to back writes */ 57 }; 58 59 60 static int sdhci_bcm_kona_sd_reset(struct sdhci_host *host) 61 { 62 unsigned int val; 63 unsigned long timeout; 64 65 /* This timeout should be sufficent for core to reset */ 66 timeout = jiffies + msecs_to_jiffies(100); 67 68 /* reset the host using the top level reset */ 69 val = sdhci_readl(host, KONA_SDHOST_CORECTRL); 70 val |= KONA_SDHOST_RESET; 71 sdhci_writel(host, val, KONA_SDHOST_CORECTRL); 72 73 while (!(sdhci_readl(host, KONA_SDHOST_CORECTRL) & KONA_SDHOST_RESET)) { 74 if (time_is_before_jiffies(timeout)) { 75 pr_err("Error: sd host is stuck in reset!!!\n"); 76 return -EFAULT; 77 } 78 } 79 80 /* bring the host out of reset */ 81 val = sdhci_readl(host, KONA_SDHOST_CORECTRL); 82 val &= ~KONA_SDHOST_RESET; 83 84 /* 85 * Back-to-Back register write needs a delay of 1ms at bootup (min 10uS) 86 * Back-to-Back writes to same register needs delay when SD bus clock 87 * is very low w.r.t AHB clock, mainly during boot-time and during card 88 * insert-removal. 89 */ 90 usleep_range(1000, 5000); 91 sdhci_writel(host, val, KONA_SDHOST_CORECTRL); 92 93 return 0; 94 } 95 96 static void sdhci_bcm_kona_sd_init(struct sdhci_host *host) 97 { 98 unsigned int val; 99 100 /* enable the interrupt from the IP core */ 101 val = sdhci_readl(host, KONA_SDHOST_COREIMR); 102 val |= KONA_SDHOST_IP; 103 sdhci_writel(host, val, KONA_SDHOST_COREIMR); 104 105 /* Enable the AHB clock gating module to the host */ 106 val = sdhci_readl(host, KONA_SDHOST_CORECTRL); 107 val |= KONA_SDHOST_EN; 108 109 /* 110 * Back-to-Back register write needs a delay of 1ms at bootup (min 10uS) 111 * Back-to-Back writes to same register needs delay when SD bus clock 112 * is very low w.r.t AHB clock, mainly during boot-time and during card 113 * insert-removal. 114 */ 115 usleep_range(1000, 5000); 116 sdhci_writel(host, val, KONA_SDHOST_CORECTRL); 117 } 118 119 /* 120 * Software emulation of the SD card insertion/removal. Set insert=1 for insert 121 * and insert=0 for removal. The card detection is done by GPIO. For Broadcom 122 * IP to function properly the bit 0 of CORESTAT register needs to be set/reset 123 * to generate the CD IRQ handled in sdhci.c which schedules card_tasklet. 124 */ 125 static int sdhci_bcm_kona_sd_card_emulate(struct sdhci_host *host, int insert) 126 { 127 struct sdhci_pltfm_host *pltfm_priv = sdhci_priv(host); 128 struct sdhci_bcm_kona_dev *kona_dev = sdhci_pltfm_priv(pltfm_priv); 129 u32 val; 130 131 /* 132 * Back-to-Back register write needs a delay of min 10uS. 133 * Back-to-Back writes to same register needs delay when SD bus clock 134 * is very low w.r.t AHB clock, mainly during boot-time and during card 135 * insert-removal. 136 * We keep 20uS 137 */ 138 mutex_lock(&kona_dev->write_lock); 139 udelay(20); 140 val = sdhci_readl(host, KONA_SDHOST_CORESTAT); 141 142 if (insert) { 143 int ret; 144 145 ret = mmc_gpio_get_ro(host->mmc); 146 if (ret >= 0) 147 val = (val & ~KONA_SDHOST_WP) | 148 ((ret) ? KONA_SDHOST_WP : 0); 149 150 val |= KONA_SDHOST_CD_SW; 151 sdhci_writel(host, val, KONA_SDHOST_CORESTAT); 152 } else { 153 val &= ~KONA_SDHOST_CD_SW; 154 sdhci_writel(host, val, KONA_SDHOST_CORESTAT); 155 } 156 mutex_unlock(&kona_dev->write_lock); 157 158 return 0; 159 } 160 161 /* 162 * SD card interrupt event callback 163 */ 164 static void sdhci_bcm_kona_card_event(struct sdhci_host *host) 165 { 166 if (mmc_gpio_get_cd(host->mmc) > 0) { 167 dev_dbg(mmc_dev(host->mmc), 168 "card inserted\n"); 169 sdhci_bcm_kona_sd_card_emulate(host, 1); 170 } else { 171 dev_dbg(mmc_dev(host->mmc), 172 "card removed\n"); 173 sdhci_bcm_kona_sd_card_emulate(host, 0); 174 } 175 } 176 177 /* 178 * Get the base clock. Use central clock source for now. Not sure if different 179 * clock speed to each dev is allowed 180 */ 181 static unsigned int sdhci_bcm_kona_get_max_clk(struct sdhci_host *host) 182 { 183 struct sdhci_bcm_kona_dev *kona_dev; 184 struct sdhci_pltfm_host *pltfm_priv = sdhci_priv(host); 185 kona_dev = sdhci_pltfm_priv(pltfm_priv); 186 187 return host->mmc->f_max; 188 } 189 190 static unsigned int sdhci_bcm_kona_get_timeout_clock(struct sdhci_host *host) 191 { 192 return sdhci_bcm_kona_get_max_clk(host); 193 } 194 195 static void sdhci_bcm_kona_init_74_clocks(struct sdhci_host *host, 196 u8 power_mode) 197 { 198 /* 199 * JEDEC and SD spec specify supplying 74 continuous clocks to 200 * device after power up. With minimum bus (100KHz) that 201 * that translates to 740us 202 */ 203 if (power_mode != MMC_POWER_OFF) 204 udelay(740); 205 } 206 207 static struct sdhci_ops sdhci_bcm_kona_ops = { 208 .get_max_clock = sdhci_bcm_kona_get_max_clk, 209 .get_timeout_clock = sdhci_bcm_kona_get_timeout_clock, 210 .platform_send_init_74_clocks = sdhci_bcm_kona_init_74_clocks, 211 .card_event = sdhci_bcm_kona_card_event, 212 }; 213 214 static struct sdhci_pltfm_data sdhci_pltfm_data_kona = { 215 .ops = &sdhci_bcm_kona_ops, 216 .quirks = SDHCI_QUIRK_NO_CARD_NO_RESET | 217 SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | SDHCI_QUIRK_32BIT_DMA_ADDR | 218 SDHCI_QUIRK_32BIT_DMA_SIZE | SDHCI_QUIRK_32BIT_ADMA_SIZE | 219 SDHCI_QUIRK_FORCE_BLK_SZ_2048 | 220 SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, 221 }; 222 223 static struct __initconst of_device_id sdhci_bcm_kona_of_match[] = { 224 { .compatible = "brcm,kona-sdhci"}, 225 { .compatible = "bcm,kona-sdhci"}, /* deprecated name */ 226 {} 227 }; 228 MODULE_DEVICE_TABLE(of, sdhci_bcm_kona_of_match); 229 230 static int sdhci_bcm_kona_probe(struct platform_device *pdev) 231 { 232 struct sdhci_bcm_kona_dev *kona_dev = NULL; 233 struct sdhci_pltfm_host *pltfm_priv; 234 struct device *dev = &pdev->dev; 235 struct sdhci_host *host; 236 int ret; 237 238 ret = 0; 239 240 host = sdhci_pltfm_init(pdev, &sdhci_pltfm_data_kona, 241 sizeof(*kona_dev)); 242 if (IS_ERR(host)) 243 return PTR_ERR(host); 244 245 dev_dbg(dev, "%s: inited. IOADDR=%p\n", __func__, host->ioaddr); 246 247 pltfm_priv = sdhci_priv(host); 248 249 kona_dev = sdhci_pltfm_priv(pltfm_priv); 250 mutex_init(&kona_dev->write_lock); 251 252 mmc_of_parse(host->mmc); 253 254 if (!host->mmc->f_max) { 255 dev_err(&pdev->dev, "Missing max-freq for SDHCI cfg\n"); 256 ret = -ENXIO; 257 goto err_pltfm_free; 258 } 259 260 dev_dbg(dev, "non-removable=%c\n", 261 (host->mmc->caps & MMC_CAP_NONREMOVABLE) ? 'Y' : 'N'); 262 dev_dbg(dev, "cd_gpio %c, wp_gpio %c\n", 263 (mmc_gpio_get_cd(host->mmc) != -ENOSYS) ? 'Y' : 'N', 264 (mmc_gpio_get_ro(host->mmc) != -ENOSYS) ? 'Y' : 'N'); 265 266 if (host->mmc->caps & MMC_CAP_NONREMOVABLE) 267 host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION; 268 269 dev_dbg(dev, "is_8bit=%c\n", 270 (host->mmc->caps | MMC_CAP_8_BIT_DATA) ? 'Y' : 'N'); 271 272 ret = sdhci_bcm_kona_sd_reset(host); 273 if (ret) 274 goto err_pltfm_free; 275 276 sdhci_bcm_kona_sd_init(host); 277 278 ret = sdhci_add_host(host); 279 if (ret) { 280 dev_err(dev, "Failed sdhci_add_host\n"); 281 goto err_reset; 282 } 283 284 /* if device is eMMC, emulate card insert right here */ 285 if (host->mmc->caps & MMC_CAP_NONREMOVABLE) { 286 ret = sdhci_bcm_kona_sd_card_emulate(host, 1); 287 if (ret) { 288 dev_err(dev, 289 "unable to emulate card insertion\n"); 290 goto err_remove_host; 291 } 292 } 293 /* 294 * Since the card detection GPIO interrupt is configured to be 295 * edge sensitive, check the initial GPIO value here, emulate 296 * only if the card is present 297 */ 298 if (mmc_gpio_get_cd(host->mmc) > 0) 299 sdhci_bcm_kona_sd_card_emulate(host, 1); 300 301 dev_dbg(dev, "initialized properly\n"); 302 return 0; 303 304 err_remove_host: 305 sdhci_remove_host(host, 0); 306 307 err_reset: 308 sdhci_bcm_kona_sd_reset(host); 309 310 err_pltfm_free: 311 sdhci_pltfm_free(pdev); 312 313 dev_err(dev, "Probing of sdhci-pltfm failed: %d\n", ret); 314 return ret; 315 } 316 317 static int __exit sdhci_bcm_kona_remove(struct platform_device *pdev) 318 { 319 return sdhci_pltfm_unregister(pdev); 320 } 321 322 static struct platform_driver sdhci_bcm_kona_driver = { 323 .driver = { 324 .name = "sdhci-kona", 325 .owner = THIS_MODULE, 326 .pm = SDHCI_PLTFM_PMOPS, 327 .of_match_table = sdhci_bcm_kona_of_match, 328 }, 329 .probe = sdhci_bcm_kona_probe, 330 .remove = sdhci_bcm_kona_remove, 331 }; 332 module_platform_driver(sdhci_bcm_kona_driver); 333 334 MODULE_DESCRIPTION("SDHCI driver for Broadcom Kona platform"); 335 MODULE_AUTHOR("Broadcom"); 336 MODULE_LICENSE("GPL v2"); 337