1 /* 2 * Copyright (C) 2013 Broadcom Corporation 3 * 4 * This program is free software; you can redistribute it and/or 5 * modify it under the terms of the GNU General Public License as 6 * published by the Free Software Foundation version 2. 7 * 8 * This program is distributed "as is" WITHOUT ANY WARRANTY of any 9 * kind, whether express or implied; without even the implied warranty 10 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 11 * GNU General Public License for more details. 12 */ 13 14 #include <linux/kernel.h> 15 #include <linux/module.h> 16 #include <linux/delay.h> 17 #include <linux/highmem.h> 18 #include <linux/platform_device.h> 19 #include <linux/mmc/host.h> 20 #include <linux/io.h> 21 #include <linux/gpio.h> 22 #include <linux/clk.h> 23 #include <linux/regulator/consumer.h> 24 #include <linux/of.h> 25 #include <linux/of_device.h> 26 #include <linux/of_gpio.h> 27 #include <linux/mmc/slot-gpio.h> 28 29 #include "sdhci-pltfm.h" 30 #include "sdhci.h" 31 32 #define SDHCI_SOFT_RESET 0x01000000 33 #define KONA_SDHOST_CORECTRL 0x8000 34 #define KONA_SDHOST_CD_PINCTRL 0x00000008 35 #define KONA_SDHOST_STOP_HCLK 0x00000004 36 #define KONA_SDHOST_RESET 0x00000002 37 #define KONA_SDHOST_EN 0x00000001 38 39 #define KONA_SDHOST_CORESTAT 0x8004 40 #define KONA_SDHOST_WP 0x00000002 41 #define KONA_SDHOST_CD_SW 0x00000001 42 43 #define KONA_SDHOST_COREIMR 0x8008 44 #define KONA_SDHOST_IP 0x00000001 45 46 #define KONA_SDHOST_COREISR 0x800C 47 #define KONA_SDHOST_COREIMSR 0x8010 48 #define KONA_SDHOST_COREDBG1 0x8014 49 #define KONA_SDHOST_COREGPO_MASK 0x8018 50 51 #define SD_DETECT_GPIO_DEBOUNCE_128MS 128 52 53 #define KONA_MMC_AUTOSUSPEND_DELAY (50) 54 55 struct sdhci_bcm_kona_dev { 56 struct mutex write_lock; /* protect back to back writes */ 57 }; 58 59 60 static int sdhci_bcm_kona_sd_reset(struct sdhci_host *host) 61 { 62 unsigned int val; 63 unsigned long timeout; 64 65 /* This timeout should be sufficent for core to reset */ 66 timeout = jiffies + msecs_to_jiffies(100); 67 68 /* reset the host using the top level reset */ 69 val = sdhci_readl(host, KONA_SDHOST_CORECTRL); 70 val |= KONA_SDHOST_RESET; 71 sdhci_writel(host, val, KONA_SDHOST_CORECTRL); 72 73 while (!(sdhci_readl(host, KONA_SDHOST_CORECTRL) & KONA_SDHOST_RESET)) { 74 if (time_is_before_jiffies(timeout)) { 75 pr_err("Error: sd host is stuck in reset!!!\n"); 76 return -EFAULT; 77 } 78 } 79 80 /* bring the host out of reset */ 81 val = sdhci_readl(host, KONA_SDHOST_CORECTRL); 82 val &= ~KONA_SDHOST_RESET; 83 84 /* 85 * Back-to-Back register write needs a delay of 1ms at bootup (min 10uS) 86 * Back-to-Back writes to same register needs delay when SD bus clock 87 * is very low w.r.t AHB clock, mainly during boot-time and during card 88 * insert-removal. 89 */ 90 usleep_range(1000, 5000); 91 sdhci_writel(host, val, KONA_SDHOST_CORECTRL); 92 93 return 0; 94 } 95 96 static void sdhci_bcm_kona_sd_init(struct sdhci_host *host) 97 { 98 unsigned int val; 99 100 /* enable the interrupt from the IP core */ 101 val = sdhci_readl(host, KONA_SDHOST_COREIMR); 102 val |= KONA_SDHOST_IP; 103 sdhci_writel(host, val, KONA_SDHOST_COREIMR); 104 105 /* Enable the AHB clock gating module to the host */ 106 val = sdhci_readl(host, KONA_SDHOST_CORECTRL); 107 val |= KONA_SDHOST_EN; 108 109 /* 110 * Back-to-Back register write needs a delay of 1ms at bootup (min 10uS) 111 * Back-to-Back writes to same register needs delay when SD bus clock 112 * is very low w.r.t AHB clock, mainly during boot-time and during card 113 * insert-removal. 114 */ 115 usleep_range(1000, 5000); 116 sdhci_writel(host, val, KONA_SDHOST_CORECTRL); 117 } 118 119 /* 120 * Software emulation of the SD card insertion/removal. Set insert=1 for insert 121 * and insert=0 for removal. The card detection is done by GPIO. For Broadcom 122 * IP to function properly the bit 0 of CORESTAT register needs to be set/reset 123 * to generate the CD IRQ handled in sdhci.c which schedules card_tasklet. 124 */ 125 static int sdhci_bcm_kona_sd_card_emulate(struct sdhci_host *host, int insert) 126 { 127 struct sdhci_pltfm_host *pltfm_priv = sdhci_priv(host); 128 struct sdhci_bcm_kona_dev *kona_dev = sdhci_pltfm_priv(pltfm_priv); 129 u32 val; 130 131 /* 132 * Back-to-Back register write needs a delay of min 10uS. 133 * Back-to-Back writes to same register needs delay when SD bus clock 134 * is very low w.r.t AHB clock, mainly during boot-time and during card 135 * insert-removal. 136 * We keep 20uS 137 */ 138 mutex_lock(&kona_dev->write_lock); 139 udelay(20); 140 val = sdhci_readl(host, KONA_SDHOST_CORESTAT); 141 142 if (insert) { 143 int ret; 144 145 ret = mmc_gpio_get_ro(host->mmc); 146 if (ret >= 0) 147 val = (val & ~KONA_SDHOST_WP) | 148 ((ret) ? KONA_SDHOST_WP : 0); 149 150 val |= KONA_SDHOST_CD_SW; 151 sdhci_writel(host, val, KONA_SDHOST_CORESTAT); 152 } else { 153 val &= ~KONA_SDHOST_CD_SW; 154 sdhci_writel(host, val, KONA_SDHOST_CORESTAT); 155 } 156 mutex_unlock(&kona_dev->write_lock); 157 158 return 0; 159 } 160 161 /* 162 * SD card interrupt event callback 163 */ 164 static void sdhci_bcm_kona_card_event(struct sdhci_host *host) 165 { 166 if (mmc_gpio_get_cd(host->mmc) > 0) { 167 dev_dbg(mmc_dev(host->mmc), 168 "card inserted\n"); 169 sdhci_bcm_kona_sd_card_emulate(host, 1); 170 } else { 171 dev_dbg(mmc_dev(host->mmc), 172 "card removed\n"); 173 sdhci_bcm_kona_sd_card_emulate(host, 0); 174 } 175 } 176 177 static void sdhci_bcm_kona_init_74_clocks(struct sdhci_host *host, 178 u8 power_mode) 179 { 180 /* 181 * JEDEC and SD spec specify supplying 74 continuous clocks to 182 * device after power up. With minimum bus (100KHz) that 183 * that translates to 740us 184 */ 185 if (power_mode != MMC_POWER_OFF) 186 udelay(740); 187 } 188 189 static const struct sdhci_ops sdhci_bcm_kona_ops = { 190 .set_clock = sdhci_set_clock, 191 .get_max_clock = sdhci_pltfm_clk_get_max_clock, 192 .get_timeout_clock = sdhci_pltfm_clk_get_max_clock, 193 .platform_send_init_74_clocks = sdhci_bcm_kona_init_74_clocks, 194 .set_bus_width = sdhci_set_bus_width, 195 .reset = sdhci_reset, 196 .set_uhs_signaling = sdhci_set_uhs_signaling, 197 .card_event = sdhci_bcm_kona_card_event, 198 }; 199 200 static const struct sdhci_pltfm_data sdhci_pltfm_data_kona = { 201 .ops = &sdhci_bcm_kona_ops, 202 .quirks = SDHCI_QUIRK_NO_CARD_NO_RESET | 203 SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | SDHCI_QUIRK_32BIT_DMA_ADDR | 204 SDHCI_QUIRK_32BIT_DMA_SIZE | SDHCI_QUIRK_32BIT_ADMA_SIZE | 205 SDHCI_QUIRK_FORCE_BLK_SZ_2048 | 206 SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, 207 }; 208 209 static const struct of_device_id sdhci_bcm_kona_of_match[] = { 210 { .compatible = "brcm,kona-sdhci"}, 211 { .compatible = "bcm,kona-sdhci"}, /* deprecated name */ 212 {} 213 }; 214 MODULE_DEVICE_TABLE(of, sdhci_bcm_kona_of_match); 215 216 static int sdhci_bcm_kona_probe(struct platform_device *pdev) 217 { 218 struct sdhci_bcm_kona_dev *kona_dev = NULL; 219 struct sdhci_pltfm_host *pltfm_priv; 220 struct device *dev = &pdev->dev; 221 struct sdhci_host *host; 222 int ret; 223 224 ret = 0; 225 226 host = sdhci_pltfm_init(pdev, &sdhci_pltfm_data_kona, 227 sizeof(*kona_dev)); 228 if (IS_ERR(host)) 229 return PTR_ERR(host); 230 231 dev_dbg(dev, "%s: inited. IOADDR=%p\n", __func__, host->ioaddr); 232 233 pltfm_priv = sdhci_priv(host); 234 235 kona_dev = sdhci_pltfm_priv(pltfm_priv); 236 mutex_init(&kona_dev->write_lock); 237 238 ret = mmc_of_parse(host->mmc); 239 if (ret) 240 goto err_pltfm_free; 241 242 if (!host->mmc->f_max) { 243 dev_err(&pdev->dev, "Missing max-freq for SDHCI cfg\n"); 244 ret = -ENXIO; 245 goto err_pltfm_free; 246 } 247 248 /* Get and enable the core clock */ 249 pltfm_priv->clk = devm_clk_get(dev, NULL); 250 if (IS_ERR(pltfm_priv->clk)) { 251 dev_err(dev, "Failed to get core clock\n"); 252 ret = PTR_ERR(pltfm_priv->clk); 253 goto err_pltfm_free; 254 } 255 256 ret = clk_set_rate(pltfm_priv->clk, host->mmc->f_max); 257 if (ret) { 258 dev_err(dev, "Failed to set rate core clock\n"); 259 goto err_pltfm_free; 260 } 261 262 ret = clk_prepare_enable(pltfm_priv->clk); 263 if (ret) { 264 dev_err(dev, "Failed to enable core clock\n"); 265 goto err_pltfm_free; 266 } 267 268 dev_dbg(dev, "non-removable=%c\n", 269 mmc_card_is_removable(host->mmc) ? 'N' : 'Y'); 270 dev_dbg(dev, "cd_gpio %c, wp_gpio %c\n", 271 (mmc_gpio_get_cd(host->mmc) != -ENOSYS) ? 'Y' : 'N', 272 (mmc_gpio_get_ro(host->mmc) != -ENOSYS) ? 'Y' : 'N'); 273 274 if (!mmc_card_is_removable(host->mmc)) 275 host->quirks |= SDHCI_QUIRK_BROKEN_CARD_DETECTION; 276 277 dev_dbg(dev, "is_8bit=%c\n", 278 (host->mmc->caps & MMC_CAP_8_BIT_DATA) ? 'Y' : 'N'); 279 280 ret = sdhci_bcm_kona_sd_reset(host); 281 if (ret) 282 goto err_clk_disable; 283 284 sdhci_bcm_kona_sd_init(host); 285 286 ret = sdhci_add_host(host); 287 if (ret) { 288 dev_err(dev, "Failed sdhci_add_host\n"); 289 goto err_reset; 290 } 291 292 /* if device is eMMC, emulate card insert right here */ 293 if (!mmc_card_is_removable(host->mmc)) { 294 ret = sdhci_bcm_kona_sd_card_emulate(host, 1); 295 if (ret) { 296 dev_err(dev, 297 "unable to emulate card insertion\n"); 298 goto err_remove_host; 299 } 300 } 301 /* 302 * Since the card detection GPIO interrupt is configured to be 303 * edge sensitive, check the initial GPIO value here, emulate 304 * only if the card is present 305 */ 306 if (mmc_gpio_get_cd(host->mmc) > 0) 307 sdhci_bcm_kona_sd_card_emulate(host, 1); 308 309 dev_dbg(dev, "initialized properly\n"); 310 return 0; 311 312 err_remove_host: 313 sdhci_remove_host(host, 0); 314 315 err_reset: 316 sdhci_bcm_kona_sd_reset(host); 317 318 err_clk_disable: 319 clk_disable_unprepare(pltfm_priv->clk); 320 321 err_pltfm_free: 322 sdhci_pltfm_free(pdev); 323 324 dev_err(dev, "Probing of sdhci-pltfm failed: %d\n", ret); 325 return ret; 326 } 327 328 static struct platform_driver sdhci_bcm_kona_driver = { 329 .driver = { 330 .name = "sdhci-kona", 331 .pm = &sdhci_pltfm_pmops, 332 .of_match_table = sdhci_bcm_kona_of_match, 333 }, 334 .probe = sdhci_bcm_kona_probe, 335 .remove = sdhci_pltfm_unregister, 336 }; 337 module_platform_driver(sdhci_bcm_kona_driver); 338 339 MODULE_DESCRIPTION("SDHCI driver for Broadcom Kona platform"); 340 MODULE_AUTHOR("Broadcom"); 341 MODULE_LICENSE("GPL v2"); 342