1 /* 2 * Renesas SDHI 3 * 4 * Copyright (C) 2015-17 Renesas Electronics Corporation 5 * Copyright (C) 2016-17 Sang Engineering, Wolfram Sang 6 * Copyright (C) 2016-17 Horms Solutions, Simon Horman 7 * Copyright (C) 2009 Magnus Damm 8 * 9 * This program is free software; you can redistribute it and/or modify 10 * it under the terms of the GNU General Public License version 2 as 11 * published by the Free Software Foundation. 12 * 13 * Based on "Compaq ASIC3 support": 14 * 15 * Copyright 2001 Compaq Computer Corporation. 16 * Copyright 2004-2005 Phil Blundell 17 * Copyright 2007-2008 OpenedHand Ltd. 18 * 19 * Authors: Phil Blundell <pb@handhelds.org>, 20 * Samuel Ortiz <sameo@openedhand.com> 21 * 22 */ 23 24 #include <linux/kernel.h> 25 #include <linux/clk.h> 26 #include <linux/slab.h> 27 #include <linux/module.h> 28 #include <linux/of_device.h> 29 #include <linux/platform_device.h> 30 #include <linux/mmc/host.h> 31 #include <linux/mfd/tmio.h> 32 #include <linux/sh_dma.h> 33 #include <linux/delay.h> 34 #include <linux/pinctrl/consumer.h> 35 #include <linux/pinctrl/pinctrl-state.h> 36 #include <linux/regulator/consumer.h> 37 38 #include "renesas_sdhi.h" 39 #include "tmio_mmc.h" 40 41 #define EXT_ACC 0xe4 42 43 #define SDHI_VER_GEN2_SDR50 0x490c 44 #define SDHI_VER_RZ_A1 0x820b 45 /* very old datasheets said 0x490c for SDR104, too. They are wrong! */ 46 #define SDHI_VER_GEN2_SDR104 0xcb0d 47 #define SDHI_VER_GEN3_SD 0xcc10 48 #define SDHI_VER_GEN3_SDMMC 0xcd10 49 50 static void renesas_sdhi_sdbuf_width(struct tmio_mmc_host *host, int width) 51 { 52 u32 val; 53 54 /* 55 * see also 56 * renesas_sdhi_of_data :: dma_buswidth 57 */ 58 switch (sd_ctrl_read16(host, CTL_VERSION)) { 59 case SDHI_VER_GEN2_SDR50: 60 val = (width == 32) ? 0x0001 : 0x0000; 61 break; 62 case SDHI_VER_GEN2_SDR104: 63 val = (width == 32) ? 0x0000 : 0x0001; 64 break; 65 case SDHI_VER_GEN3_SD: 66 case SDHI_VER_GEN3_SDMMC: 67 if (width == 64) 68 val = 0x0000; 69 else if (width == 32) 70 val = 0x0101; 71 else 72 val = 0x0001; 73 break; 74 default: 75 /* nothing to do */ 76 return; 77 } 78 79 sd_ctrl_write16(host, EXT_ACC, val); 80 } 81 82 static int renesas_sdhi_clk_enable(struct tmio_mmc_host *host) 83 { 84 struct mmc_host *mmc = host->mmc; 85 struct renesas_sdhi *priv = host_to_priv(host); 86 int ret = clk_prepare_enable(priv->clk); 87 88 if (ret < 0) 89 return ret; 90 91 ret = clk_prepare_enable(priv->clk_cd); 92 if (ret < 0) { 93 clk_disable_unprepare(priv->clk); 94 return ret; 95 } 96 97 /* 98 * The clock driver may not know what maximum frequency 99 * actually works, so it should be set with the max-frequency 100 * property which will already have been read to f_max. If it 101 * was missing, assume the current frequency is the maximum. 102 */ 103 if (!mmc->f_max) 104 mmc->f_max = clk_get_rate(priv->clk); 105 106 /* 107 * Minimum frequency is the minimum input clock frequency 108 * divided by our maximum divider. 109 */ 110 mmc->f_min = max(clk_round_rate(priv->clk, 1) / 512, 1L); 111 112 /* enable 16bit data access on SDBUF as default */ 113 renesas_sdhi_sdbuf_width(host, 16); 114 115 return 0; 116 } 117 118 static unsigned int renesas_sdhi_clk_update(struct tmio_mmc_host *host, 119 unsigned int new_clock) 120 { 121 struct renesas_sdhi *priv = host_to_priv(host); 122 unsigned int freq, diff, best_freq = 0, diff_min = ~0; 123 int i, ret; 124 125 /* tested only on R-Car Gen2+ currently; may work for others */ 126 if (!(host->pdata->flags & TMIO_MMC_MIN_RCAR2)) 127 return clk_get_rate(priv->clk); 128 129 /* 130 * We want the bus clock to be as close as possible to, but no 131 * greater than, new_clock. As we can divide by 1 << i for 132 * any i in [0, 9] we want the input clock to be as close as 133 * possible, but no greater than, new_clock << i. 134 */ 135 for (i = min(9, ilog2(UINT_MAX / new_clock)); i >= 0; i--) { 136 freq = clk_round_rate(priv->clk, new_clock << i); 137 if (freq > (new_clock << i)) { 138 /* Too fast; look for a slightly slower option */ 139 freq = clk_round_rate(priv->clk, 140 (new_clock << i) / 4 * 3); 141 if (freq > (new_clock << i)) 142 continue; 143 } 144 145 diff = new_clock - (freq >> i); 146 if (diff <= diff_min) { 147 best_freq = freq; 148 diff_min = diff; 149 } 150 } 151 152 ret = clk_set_rate(priv->clk, best_freq); 153 154 return ret == 0 ? best_freq : clk_get_rate(priv->clk); 155 } 156 157 static void renesas_sdhi_clk_disable(struct tmio_mmc_host *host) 158 { 159 struct renesas_sdhi *priv = host_to_priv(host); 160 161 clk_disable_unprepare(priv->clk); 162 clk_disable_unprepare(priv->clk_cd); 163 } 164 165 static int renesas_sdhi_card_busy(struct mmc_host *mmc) 166 { 167 struct tmio_mmc_host *host = mmc_priv(mmc); 168 169 return !(sd_ctrl_read16_and_16_as_32(host, CTL_STATUS) & 170 TMIO_STAT_DAT0); 171 } 172 173 static int renesas_sdhi_start_signal_voltage_switch(struct mmc_host *mmc, 174 struct mmc_ios *ios) 175 { 176 struct tmio_mmc_host *host = mmc_priv(mmc); 177 struct renesas_sdhi *priv = host_to_priv(host); 178 struct pinctrl_state *pin_state; 179 int ret; 180 181 switch (ios->signal_voltage) { 182 case MMC_SIGNAL_VOLTAGE_330: 183 pin_state = priv->pins_default; 184 break; 185 case MMC_SIGNAL_VOLTAGE_180: 186 pin_state = priv->pins_uhs; 187 break; 188 default: 189 return -EINVAL; 190 } 191 192 /* 193 * If anything is missing, assume signal voltage is fixed at 194 * 3.3V and succeed/fail accordingly. 195 */ 196 if (IS_ERR(priv->pinctrl) || IS_ERR(pin_state)) 197 return ios->signal_voltage == 198 MMC_SIGNAL_VOLTAGE_330 ? 0 : -EINVAL; 199 200 ret = mmc_regulator_set_vqmmc(host->mmc, ios); 201 if (ret) 202 return ret; 203 204 return pinctrl_select_state(priv->pinctrl, pin_state); 205 } 206 207 /* SCC registers */ 208 #define SH_MOBILE_SDHI_SCC_DTCNTL 0x000 209 #define SH_MOBILE_SDHI_SCC_TAPSET 0x002 210 #define SH_MOBILE_SDHI_SCC_DT2FF 0x004 211 #define SH_MOBILE_SDHI_SCC_CKSEL 0x006 212 #define SH_MOBILE_SDHI_SCC_RVSCNTL 0x008 213 #define SH_MOBILE_SDHI_SCC_RVSREQ 0x00A 214 215 /* Definitions for values the SH_MOBILE_SDHI_SCC_DTCNTL register */ 216 #define SH_MOBILE_SDHI_SCC_DTCNTL_TAPEN BIT(0) 217 #define SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_SHIFT 16 218 #define SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_MASK 0xff 219 220 /* Definitions for values the SH_MOBILE_SDHI_SCC_CKSEL register */ 221 #define SH_MOBILE_SDHI_SCC_CKSEL_DTSEL BIT(0) 222 /* Definitions for values the SH_MOBILE_SDHI_SCC_RVSCNTL register */ 223 #define SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN BIT(0) 224 /* Definitions for values the SH_MOBILE_SDHI_SCC_RVSREQ register */ 225 #define SH_MOBILE_SDHI_SCC_RVSREQ_RVSERR BIT(2) 226 227 static inline u32 sd_scc_read32(struct tmio_mmc_host *host, 228 struct renesas_sdhi *priv, int addr) 229 { 230 return readl(priv->scc_ctl + (addr << host->bus_shift)); 231 } 232 233 static inline void sd_scc_write32(struct tmio_mmc_host *host, 234 struct renesas_sdhi *priv, 235 int addr, u32 val) 236 { 237 writel(val, priv->scc_ctl + (addr << host->bus_shift)); 238 } 239 240 static unsigned int renesas_sdhi_init_tuning(struct tmio_mmc_host *host) 241 { 242 struct renesas_sdhi *priv; 243 244 priv = host_to_priv(host); 245 246 /* set sampling clock selection range */ 247 sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DTCNTL, 248 0x8 << SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_SHIFT); 249 250 /* Initialize SCC */ 251 sd_ctrl_write32_as_16_and_16(host, CTL_STATUS, 0x0); 252 253 sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DTCNTL, 254 SH_MOBILE_SDHI_SCC_DTCNTL_TAPEN | 255 sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_DTCNTL)); 256 257 sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN & 258 sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); 259 260 sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_CKSEL, 261 SH_MOBILE_SDHI_SCC_CKSEL_DTSEL | 262 sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_CKSEL)); 263 264 sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN | 265 sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); 266 267 sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL, 268 ~SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN & 269 sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL)); 270 271 sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_DT2FF, priv->scc_tappos); 272 273 /* Read TAPNUM */ 274 return (sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_DTCNTL) >> 275 SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_SHIFT) & 276 SH_MOBILE_SDHI_SCC_DTCNTL_TAPNUM_MASK; 277 } 278 279 static void renesas_sdhi_prepare_tuning(struct tmio_mmc_host *host, 280 unsigned long tap) 281 { 282 struct renesas_sdhi *priv = host_to_priv(host); 283 284 /* Set sampling clock position */ 285 sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, tap); 286 } 287 288 #define SH_MOBILE_SDHI_MAX_TAP 3 289 290 static int renesas_sdhi_select_tuning(struct tmio_mmc_host *host) 291 { 292 struct renesas_sdhi *priv = host_to_priv(host); 293 unsigned long tap_cnt; /* counter of tuning success */ 294 unsigned long tap_set; /* tap position */ 295 unsigned long tap_start;/* start position of tuning success */ 296 unsigned long tap_end; /* end position of tuning success */ 297 unsigned long ntap; /* temporary counter of tuning success */ 298 unsigned long i; 299 300 /* Clear SCC_RVSREQ */ 301 sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSREQ, 0); 302 303 /* 304 * Find the longest consecutive run of successful probes. If that 305 * is more than SH_MOBILE_SDHI_MAX_TAP probes long then use the 306 * center index as the tap. 307 */ 308 tap_cnt = 0; 309 ntap = 0; 310 tap_start = 0; 311 tap_end = 0; 312 for (i = 0; i < host->tap_num * 2; i++) { 313 if (test_bit(i, host->taps)) { 314 ntap++; 315 } else { 316 if (ntap > tap_cnt) { 317 tap_start = i - ntap; 318 tap_end = i - 1; 319 tap_cnt = ntap; 320 } 321 ntap = 0; 322 } 323 } 324 325 if (ntap > tap_cnt) { 326 tap_start = i - ntap; 327 tap_end = i - 1; 328 tap_cnt = ntap; 329 } 330 331 if (tap_cnt >= SH_MOBILE_SDHI_MAX_TAP) 332 tap_set = (tap_start + tap_end) / 2 % host->tap_num; 333 else 334 return -EIO; 335 336 /* Set SCC */ 337 sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_TAPSET, tap_set); 338 339 /* Enable auto re-tuning */ 340 sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL, 341 SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN | 342 sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL)); 343 344 return 0; 345 } 346 347 static bool renesas_sdhi_check_scc_error(struct tmio_mmc_host *host) 348 { 349 struct renesas_sdhi *priv = host_to_priv(host); 350 351 /* Check SCC error */ 352 if (sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL) & 353 SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN && 354 sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSREQ) & 355 SH_MOBILE_SDHI_SCC_RVSREQ_RVSERR) { 356 /* Clear SCC error */ 357 sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSREQ, 0); 358 return true; 359 } 360 361 return false; 362 } 363 364 static void renesas_sdhi_hw_reset(struct tmio_mmc_host *host) 365 { 366 struct renesas_sdhi *priv; 367 368 priv = host_to_priv(host); 369 370 /* Reset SCC */ 371 sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, ~CLK_CTL_SCLKEN & 372 sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); 373 374 sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_CKSEL, 375 ~SH_MOBILE_SDHI_SCC_CKSEL_DTSEL & 376 sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_CKSEL)); 377 378 sd_ctrl_write16(host, CTL_SD_CARD_CLK_CTL, CLK_CTL_SCLKEN | 379 sd_ctrl_read16(host, CTL_SD_CARD_CLK_CTL)); 380 381 sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL, 382 ~SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN & 383 sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL)); 384 385 sd_scc_write32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL, 386 ~SH_MOBILE_SDHI_SCC_RVSCNTL_RVSEN & 387 sd_scc_read32(host, priv, SH_MOBILE_SDHI_SCC_RVSCNTL)); 388 } 389 390 static int renesas_sdhi_wait_idle(struct tmio_mmc_host *host, u32 bit) 391 { 392 int timeout = 1000; 393 /* CBSY is set when busy, SCLKDIVEN is cleared when busy */ 394 u32 wait_state = (bit == TMIO_STAT_CMD_BUSY ? TMIO_STAT_CMD_BUSY : 0); 395 396 while (--timeout && (sd_ctrl_read16_and_16_as_32(host, CTL_STATUS) 397 & bit) == wait_state) 398 udelay(1); 399 400 if (!timeout) { 401 dev_warn(&host->pdev->dev, "timeout waiting for SD bus idle\n"); 402 return -EBUSY; 403 } 404 405 return 0; 406 } 407 408 static int renesas_sdhi_write16_hook(struct tmio_mmc_host *host, int addr) 409 { 410 u32 bit = TMIO_STAT_SCLKDIVEN; 411 412 switch (addr) { 413 case CTL_SD_CMD: 414 case CTL_STOP_INTERNAL_ACTION: 415 case CTL_XFER_BLK_COUNT: 416 case CTL_SD_XFER_LEN: 417 case CTL_SD_MEM_CARD_OPT: 418 case CTL_TRANSACTION_CTL: 419 case CTL_DMA_ENABLE: 420 case EXT_ACC: 421 if (host->pdata->flags & TMIO_MMC_HAVE_CBSY) 422 bit = TMIO_STAT_CMD_BUSY; 423 /* fallthrough */ 424 case CTL_SD_CARD_CLK_CTL: 425 return renesas_sdhi_wait_idle(host, bit); 426 } 427 428 return 0; 429 } 430 431 static int renesas_sdhi_multi_io_quirk(struct mmc_card *card, 432 unsigned int direction, int blk_size) 433 { 434 /* 435 * In Renesas controllers, when performing a 436 * multiple block read of one or two blocks, 437 * depending on the timing with which the 438 * response register is read, the response 439 * value may not be read properly. 440 * Use single block read for this HW bug 441 */ 442 if ((direction == MMC_DATA_READ) && 443 blk_size == 2) 444 return 1; 445 446 return blk_size; 447 } 448 449 static void renesas_sdhi_enable_dma(struct tmio_mmc_host *host, bool enable) 450 { 451 /* Iff regs are 8 byte apart, sdbuf is 64 bit. Otherwise always 32. */ 452 int width = (host->bus_shift == 2) ? 64 : 32; 453 454 sd_ctrl_write16(host, CTL_DMA_ENABLE, enable ? DMA_ENABLE_DMASDRW : 0); 455 renesas_sdhi_sdbuf_width(host, enable ? width : 16); 456 } 457 458 int renesas_sdhi_probe(struct platform_device *pdev, 459 const struct tmio_mmc_dma_ops *dma_ops) 460 { 461 struct tmio_mmc_data *mmd = pdev->dev.platform_data; 462 const struct renesas_sdhi_of_data *of_data; 463 struct tmio_mmc_data *mmc_data; 464 struct tmio_mmc_dma *dma_priv; 465 struct tmio_mmc_host *host; 466 struct renesas_sdhi *priv; 467 struct resource *res; 468 int irq, ret, i; 469 470 of_data = of_device_get_match_data(&pdev->dev); 471 472 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 473 if (!res) 474 return -EINVAL; 475 476 priv = devm_kzalloc(&pdev->dev, sizeof(struct renesas_sdhi), 477 GFP_KERNEL); 478 if (!priv) 479 return -ENOMEM; 480 481 mmc_data = &priv->mmc_data; 482 dma_priv = &priv->dma_priv; 483 484 priv->clk = devm_clk_get(&pdev->dev, NULL); 485 if (IS_ERR(priv->clk)) { 486 ret = PTR_ERR(priv->clk); 487 dev_err(&pdev->dev, "cannot get clock: %d\n", ret); 488 return ret; 489 } 490 491 /* 492 * Some controllers provide a 2nd clock just to run the internal card 493 * detection logic. Unfortunately, the existing driver architecture does 494 * not support a separation of clocks for runtime PM usage. When 495 * native hotplug is used, the tmio driver assumes that the core 496 * must continue to run for card detect to stay active, so we cannot 497 * disable it. 498 * Additionally, it is prohibited to supply a clock to the core but not 499 * to the card detect circuit. That leaves us with if separate clocks 500 * are presented, we must treat them both as virtually 1 clock. 501 */ 502 priv->clk_cd = devm_clk_get(&pdev->dev, "cd"); 503 if (IS_ERR(priv->clk_cd)) 504 priv->clk_cd = NULL; 505 506 priv->pinctrl = devm_pinctrl_get(&pdev->dev); 507 if (!IS_ERR(priv->pinctrl)) { 508 priv->pins_default = pinctrl_lookup_state(priv->pinctrl, 509 PINCTRL_STATE_DEFAULT); 510 priv->pins_uhs = pinctrl_lookup_state(priv->pinctrl, 511 "state_uhs"); 512 } 513 514 host = tmio_mmc_host_alloc(pdev, mmc_data); 515 if (IS_ERR(host)) 516 return PTR_ERR(host); 517 518 if (of_data) { 519 mmc_data->flags |= of_data->tmio_flags; 520 mmc_data->ocr_mask = of_data->tmio_ocr_mask; 521 mmc_data->capabilities |= of_data->capabilities; 522 mmc_data->capabilities2 |= of_data->capabilities2; 523 mmc_data->dma_rx_offset = of_data->dma_rx_offset; 524 mmc_data->max_blk_count = of_data->max_blk_count; 525 mmc_data->max_segs = of_data->max_segs; 526 dma_priv->dma_buswidth = of_data->dma_buswidth; 527 host->bus_shift = of_data->bus_shift; 528 } 529 530 host->write16_hook = renesas_sdhi_write16_hook; 531 host->clk_enable = renesas_sdhi_clk_enable; 532 host->clk_update = renesas_sdhi_clk_update; 533 host->clk_disable = renesas_sdhi_clk_disable; 534 host->multi_io_quirk = renesas_sdhi_multi_io_quirk; 535 host->dma_ops = dma_ops; 536 537 /* SDR speeds are only available on Gen2+ */ 538 if (mmc_data->flags & TMIO_MMC_MIN_RCAR2) { 539 /* card_busy caused issues on r8a73a4 (pre-Gen2) CD-less SDHI */ 540 host->ops.card_busy = renesas_sdhi_card_busy; 541 host->ops.start_signal_voltage_switch = 542 renesas_sdhi_start_signal_voltage_switch; 543 } 544 545 /* Orginally registers were 16 bit apart, could be 32 or 64 nowadays */ 546 if (!host->bus_shift && resource_size(res) > 0x100) /* old way to determine the shift */ 547 host->bus_shift = 1; 548 549 if (mmd) 550 *mmc_data = *mmd; 551 552 dma_priv->filter = shdma_chan_filter; 553 dma_priv->enable = renesas_sdhi_enable_dma; 554 555 mmc_data->alignment_shift = 1; /* 2-byte alignment */ 556 mmc_data->capabilities |= MMC_CAP_MMC_HIGHSPEED; 557 558 /* 559 * All SDHI blocks support 2-byte and larger block sizes in 4-bit 560 * bus width mode. 561 */ 562 mmc_data->flags |= TMIO_MMC_BLKSZ_2BYTES; 563 564 /* 565 * All SDHI blocks support SDIO IRQ signalling. 566 */ 567 mmc_data->flags |= TMIO_MMC_SDIO_IRQ; 568 569 /* All SDHI have CMD12 control bit */ 570 mmc_data->flags |= TMIO_MMC_HAVE_CMD12_CTRL; 571 572 /* All SDHI have SDIO status bits which must be 1 */ 573 mmc_data->flags |= TMIO_MMC_SDIO_STATUS_SETBITS; 574 575 ret = renesas_sdhi_clk_enable(host); 576 if (ret) 577 goto efree; 578 579 ret = tmio_mmc_host_probe(host); 580 if (ret < 0) 581 goto edisclk; 582 583 /* One Gen2 SDHI incarnation does NOT have a CBSY bit */ 584 if (sd_ctrl_read16(host, CTL_VERSION) == SDHI_VER_GEN2_SDR50) 585 mmc_data->flags &= ~TMIO_MMC_HAVE_CBSY; 586 587 /* Enable tuning iff we have an SCC and a supported mode */ 588 if (of_data && of_data->scc_offset && 589 (host->mmc->caps & MMC_CAP_UHS_SDR104 || 590 host->mmc->caps2 & MMC_CAP2_HS200_1_8V_SDR)) { 591 const struct renesas_sdhi_scc *taps = of_data->taps; 592 bool hit = false; 593 594 host->mmc->caps |= MMC_CAP_HW_RESET; 595 596 for (i = 0; i < of_data->taps_num; i++) { 597 if (taps[i].clk_rate == 0 || 598 taps[i].clk_rate == host->mmc->f_max) { 599 priv->scc_tappos = taps->tap; 600 hit = true; 601 break; 602 } 603 } 604 605 if (!hit) 606 dev_warn(&host->pdev->dev, "Unknown clock rate for SDR104\n"); 607 608 priv->scc_ctl = host->ctl + of_data->scc_offset; 609 host->init_tuning = renesas_sdhi_init_tuning; 610 host->prepare_tuning = renesas_sdhi_prepare_tuning; 611 host->select_tuning = renesas_sdhi_select_tuning; 612 host->check_scc_error = renesas_sdhi_check_scc_error; 613 host->hw_reset = renesas_sdhi_hw_reset; 614 } 615 616 i = 0; 617 while (1) { 618 irq = platform_get_irq(pdev, i); 619 if (irq < 0) 620 break; 621 i++; 622 ret = devm_request_irq(&pdev->dev, irq, tmio_mmc_irq, 0, 623 dev_name(&pdev->dev), host); 624 if (ret) 625 goto eirq; 626 } 627 628 /* There must be at least one IRQ source */ 629 if (!i) { 630 ret = irq; 631 goto eirq; 632 } 633 634 dev_info(&pdev->dev, "%s base at 0x%08lx max clock rate %u MHz\n", 635 mmc_hostname(host->mmc), (unsigned long) 636 (platform_get_resource(pdev, IORESOURCE_MEM, 0)->start), 637 host->mmc->f_max / 1000000); 638 639 return ret; 640 641 eirq: 642 tmio_mmc_host_remove(host); 643 edisclk: 644 renesas_sdhi_clk_disable(host); 645 efree: 646 tmio_mmc_host_free(host); 647 648 return ret; 649 } 650 EXPORT_SYMBOL_GPL(renesas_sdhi_probe); 651 652 int renesas_sdhi_remove(struct platform_device *pdev) 653 { 654 struct tmio_mmc_host *host = platform_get_drvdata(pdev); 655 656 tmio_mmc_host_remove(host); 657 renesas_sdhi_clk_disable(host); 658 659 return 0; 660 } 661 EXPORT_SYMBOL_GPL(renesas_sdhi_remove); 662 663 MODULE_LICENSE("GPL v2"); 664