1 // SPDX-License-Identifier: GPL-2.0-only 2 /* 3 * Amlogic SD/eMMC driver for the GX/S905 family SoCs 4 * 5 * Copyright (c) 2016 BayLibre, SAS. 6 * Author: Kevin Hilman <khilman@baylibre.com> 7 */ 8 #include <linux/kernel.h> 9 #include <linux/module.h> 10 #include <linux/init.h> 11 #include <linux/delay.h> 12 #include <linux/device.h> 13 #include <linux/iopoll.h> 14 #include <linux/of_device.h> 15 #include <linux/platform_device.h> 16 #include <linux/ioport.h> 17 #include <linux/dma-mapping.h> 18 #include <linux/mmc/host.h> 19 #include <linux/mmc/mmc.h> 20 #include <linux/mmc/sdio.h> 21 #include <linux/mmc/slot-gpio.h> 22 #include <linux/io.h> 23 #include <linux/clk.h> 24 #include <linux/clk-provider.h> 25 #include <linux/regulator/consumer.h> 26 #include <linux/reset.h> 27 #include <linux/interrupt.h> 28 #include <linux/bitfield.h> 29 #include <linux/pinctrl/consumer.h> 30 31 #define DRIVER_NAME "meson-gx-mmc" 32 33 #define SD_EMMC_CLOCK 0x0 34 #define CLK_DIV_MASK GENMASK(5, 0) 35 #define CLK_SRC_MASK GENMASK(7, 6) 36 #define CLK_CORE_PHASE_MASK GENMASK(9, 8) 37 #define CLK_TX_PHASE_MASK GENMASK(11, 10) 38 #define CLK_RX_PHASE_MASK GENMASK(13, 12) 39 #define CLK_PHASE_0 0 40 #define CLK_PHASE_180 2 41 #define CLK_V2_TX_DELAY_MASK GENMASK(19, 16) 42 #define CLK_V2_RX_DELAY_MASK GENMASK(23, 20) 43 #define CLK_V2_ALWAYS_ON BIT(24) 44 45 #define CLK_V3_TX_DELAY_MASK GENMASK(21, 16) 46 #define CLK_V3_RX_DELAY_MASK GENMASK(27, 22) 47 #define CLK_V3_ALWAYS_ON BIT(28) 48 49 #define CLK_TX_DELAY_MASK(h) (h->data->tx_delay_mask) 50 #define CLK_RX_DELAY_MASK(h) (h->data->rx_delay_mask) 51 #define CLK_ALWAYS_ON(h) (h->data->always_on) 52 53 #define SD_EMMC_DELAY 0x4 54 #define SD_EMMC_ADJUST 0x8 55 #define ADJUST_ADJ_DELAY_MASK GENMASK(21, 16) 56 #define ADJUST_DS_EN BIT(15) 57 #define ADJUST_ADJ_EN BIT(13) 58 59 #define SD_EMMC_DELAY1 0x4 60 #define SD_EMMC_DELAY2 0x8 61 #define SD_EMMC_V3_ADJUST 0xc 62 63 #define SD_EMMC_CALOUT 0x10 64 #define SD_EMMC_START 0x40 65 #define START_DESC_INIT BIT(0) 66 #define START_DESC_BUSY BIT(1) 67 #define START_DESC_ADDR_MASK GENMASK(31, 2) 68 69 #define SD_EMMC_CFG 0x44 70 #define CFG_BUS_WIDTH_MASK GENMASK(1, 0) 71 #define CFG_BUS_WIDTH_1 0x0 72 #define CFG_BUS_WIDTH_4 0x1 73 #define CFG_BUS_WIDTH_8 0x2 74 #define CFG_DDR BIT(2) 75 #define CFG_BLK_LEN_MASK GENMASK(7, 4) 76 #define CFG_RESP_TIMEOUT_MASK GENMASK(11, 8) 77 #define CFG_RC_CC_MASK GENMASK(15, 12) 78 #define CFG_STOP_CLOCK BIT(22) 79 #define CFG_CLK_ALWAYS_ON BIT(18) 80 #define CFG_CHK_DS BIT(20) 81 #define CFG_AUTO_CLK BIT(23) 82 #define CFG_ERR_ABORT BIT(27) 83 84 #define SD_EMMC_STATUS 0x48 85 #define STATUS_BUSY BIT(31) 86 #define STATUS_DESC_BUSY BIT(30) 87 #define STATUS_DATI GENMASK(23, 16) 88 89 #define SD_EMMC_IRQ_EN 0x4c 90 #define IRQ_RXD_ERR_MASK GENMASK(7, 0) 91 #define IRQ_TXD_ERR BIT(8) 92 #define IRQ_DESC_ERR BIT(9) 93 #define IRQ_RESP_ERR BIT(10) 94 #define IRQ_CRC_ERR \ 95 (IRQ_RXD_ERR_MASK | IRQ_TXD_ERR | IRQ_DESC_ERR | IRQ_RESP_ERR) 96 #define IRQ_RESP_TIMEOUT BIT(11) 97 #define IRQ_DESC_TIMEOUT BIT(12) 98 #define IRQ_TIMEOUTS \ 99 (IRQ_RESP_TIMEOUT | IRQ_DESC_TIMEOUT) 100 #define IRQ_END_OF_CHAIN BIT(13) 101 #define IRQ_RESP_STATUS BIT(14) 102 #define IRQ_SDIO BIT(15) 103 #define IRQ_EN_MASK \ 104 (IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN | IRQ_RESP_STATUS |\ 105 IRQ_SDIO) 106 107 #define SD_EMMC_CMD_CFG 0x50 108 #define SD_EMMC_CMD_ARG 0x54 109 #define SD_EMMC_CMD_DAT 0x58 110 #define SD_EMMC_CMD_RSP 0x5c 111 #define SD_EMMC_CMD_RSP1 0x60 112 #define SD_EMMC_CMD_RSP2 0x64 113 #define SD_EMMC_CMD_RSP3 0x68 114 115 #define SD_EMMC_RXD 0x94 116 #define SD_EMMC_TXD 0x94 117 #define SD_EMMC_LAST_REG SD_EMMC_TXD 118 119 #define SD_EMMC_SRAM_DATA_BUF_LEN 1536 120 #define SD_EMMC_SRAM_DATA_BUF_OFF 0x200 121 122 #define SD_EMMC_CFG_BLK_SIZE 512 /* internal buffer max: 512 bytes */ 123 #define SD_EMMC_CFG_RESP_TIMEOUT 256 /* in clock cycles */ 124 #define SD_EMMC_CMD_TIMEOUT 1024 /* in ms */ 125 #define SD_EMMC_CMD_TIMEOUT_DATA 4096 /* in ms */ 126 #define SD_EMMC_CFG_CMD_GAP 16 /* in clock cycles */ 127 #define SD_EMMC_DESC_BUF_LEN PAGE_SIZE 128 129 #define SD_EMMC_PRE_REQ_DONE BIT(0) 130 #define SD_EMMC_DESC_CHAIN_MODE BIT(1) 131 132 #define MUX_CLK_NUM_PARENTS 2 133 134 struct meson_mmc_data { 135 unsigned int tx_delay_mask; 136 unsigned int rx_delay_mask; 137 unsigned int always_on; 138 unsigned int adjust; 139 }; 140 141 struct sd_emmc_desc { 142 u32 cmd_cfg; 143 u32 cmd_arg; 144 u32 cmd_data; 145 u32 cmd_resp; 146 }; 147 148 struct meson_host { 149 struct device *dev; 150 struct meson_mmc_data *data; 151 struct mmc_host *mmc; 152 struct mmc_command *cmd; 153 154 void __iomem *regs; 155 struct clk *core_clk; 156 struct clk *mux_clk; 157 struct clk *mmc_clk; 158 unsigned long req_rate; 159 bool ddr; 160 161 bool dram_access_quirk; 162 163 struct pinctrl *pinctrl; 164 struct pinctrl_state *pins_default; 165 struct pinctrl_state *pins_clk_gate; 166 167 unsigned int bounce_buf_size; 168 void *bounce_buf; 169 dma_addr_t bounce_dma_addr; 170 struct sd_emmc_desc *descs; 171 dma_addr_t descs_dma_addr; 172 173 int irq; 174 175 bool vqmmc_enabled; 176 }; 177 178 #define CMD_CFG_LENGTH_MASK GENMASK(8, 0) 179 #define CMD_CFG_BLOCK_MODE BIT(9) 180 #define CMD_CFG_R1B BIT(10) 181 #define CMD_CFG_END_OF_CHAIN BIT(11) 182 #define CMD_CFG_TIMEOUT_MASK GENMASK(15, 12) 183 #define CMD_CFG_NO_RESP BIT(16) 184 #define CMD_CFG_NO_CMD BIT(17) 185 #define CMD_CFG_DATA_IO BIT(18) 186 #define CMD_CFG_DATA_WR BIT(19) 187 #define CMD_CFG_RESP_NOCRC BIT(20) 188 #define CMD_CFG_RESP_128 BIT(21) 189 #define CMD_CFG_RESP_NUM BIT(22) 190 #define CMD_CFG_DATA_NUM BIT(23) 191 #define CMD_CFG_CMD_INDEX_MASK GENMASK(29, 24) 192 #define CMD_CFG_ERROR BIT(30) 193 #define CMD_CFG_OWNER BIT(31) 194 195 #define CMD_DATA_MASK GENMASK(31, 2) 196 #define CMD_DATA_BIG_ENDIAN BIT(1) 197 #define CMD_DATA_SRAM BIT(0) 198 #define CMD_RESP_MASK GENMASK(31, 1) 199 #define CMD_RESP_SRAM BIT(0) 200 201 static unsigned int meson_mmc_get_timeout_msecs(struct mmc_data *data) 202 { 203 unsigned int timeout = data->timeout_ns / NSEC_PER_MSEC; 204 205 if (!timeout) 206 return SD_EMMC_CMD_TIMEOUT_DATA; 207 208 timeout = roundup_pow_of_two(timeout); 209 210 return min(timeout, 32768U); /* max. 2^15 ms */ 211 } 212 213 static struct mmc_command *meson_mmc_get_next_command(struct mmc_command *cmd) 214 { 215 if (cmd->opcode == MMC_SET_BLOCK_COUNT && !cmd->error) 216 return cmd->mrq->cmd; 217 else if (mmc_op_multi(cmd->opcode) && 218 (!cmd->mrq->sbc || cmd->error || cmd->data->error)) 219 return cmd->mrq->stop; 220 else 221 return NULL; 222 } 223 224 static void meson_mmc_get_transfer_mode(struct mmc_host *mmc, 225 struct mmc_request *mrq) 226 { 227 struct meson_host *host = mmc_priv(mmc); 228 struct mmc_data *data = mrq->data; 229 struct scatterlist *sg; 230 int i; 231 bool use_desc_chain_mode = true; 232 233 /* 234 * When Controller DMA cannot directly access DDR memory, disable 235 * support for Chain Mode to directly use the internal SRAM using 236 * the bounce buffer mode. 237 */ 238 if (host->dram_access_quirk) 239 return; 240 241 /* 242 * Broken SDIO with AP6255-based WiFi on Khadas VIM Pro has been 243 * reported. For some strange reason this occurs in descriptor 244 * chain mode only. So let's fall back to bounce buffer mode 245 * for command SD_IO_RW_EXTENDED. 246 */ 247 if (mrq->cmd->opcode == SD_IO_RW_EXTENDED) 248 return; 249 250 for_each_sg(data->sg, sg, data->sg_len, i) 251 /* check for 8 byte alignment */ 252 if (sg->offset & 7) { 253 WARN_ONCE(1, "unaligned scatterlist buffer\n"); 254 use_desc_chain_mode = false; 255 break; 256 } 257 258 if (use_desc_chain_mode) 259 data->host_cookie |= SD_EMMC_DESC_CHAIN_MODE; 260 } 261 262 static inline bool meson_mmc_desc_chain_mode(const struct mmc_data *data) 263 { 264 return data->host_cookie & SD_EMMC_DESC_CHAIN_MODE; 265 } 266 267 static inline bool meson_mmc_bounce_buf_read(const struct mmc_data *data) 268 { 269 return data && data->flags & MMC_DATA_READ && 270 !meson_mmc_desc_chain_mode(data); 271 } 272 273 static void meson_mmc_pre_req(struct mmc_host *mmc, struct mmc_request *mrq) 274 { 275 struct mmc_data *data = mrq->data; 276 277 if (!data) 278 return; 279 280 meson_mmc_get_transfer_mode(mmc, mrq); 281 data->host_cookie |= SD_EMMC_PRE_REQ_DONE; 282 283 if (!meson_mmc_desc_chain_mode(data)) 284 return; 285 286 data->sg_count = dma_map_sg(mmc_dev(mmc), data->sg, data->sg_len, 287 mmc_get_dma_dir(data)); 288 if (!data->sg_count) 289 dev_err(mmc_dev(mmc), "dma_map_sg failed"); 290 } 291 292 static void meson_mmc_post_req(struct mmc_host *mmc, struct mmc_request *mrq, 293 int err) 294 { 295 struct mmc_data *data = mrq->data; 296 297 if (data && meson_mmc_desc_chain_mode(data) && data->sg_count) 298 dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len, 299 mmc_get_dma_dir(data)); 300 } 301 302 /* 303 * Gating the clock on this controller is tricky. It seems the mmc clock 304 * is also used by the controller. It may crash during some operation if the 305 * clock is stopped. The safest thing to do, whenever possible, is to keep 306 * clock running at stop it at the pad using the pinmux. 307 */ 308 static void meson_mmc_clk_gate(struct meson_host *host) 309 { 310 u32 cfg; 311 312 if (host->pins_clk_gate) { 313 pinctrl_select_state(host->pinctrl, host->pins_clk_gate); 314 } else { 315 /* 316 * If the pinmux is not provided - default to the classic and 317 * unsafe method 318 */ 319 cfg = readl(host->regs + SD_EMMC_CFG); 320 cfg |= CFG_STOP_CLOCK; 321 writel(cfg, host->regs + SD_EMMC_CFG); 322 } 323 } 324 325 static void meson_mmc_clk_ungate(struct meson_host *host) 326 { 327 u32 cfg; 328 329 if (host->pins_clk_gate) 330 pinctrl_select_state(host->pinctrl, host->pins_default); 331 332 /* Make sure the clock is not stopped in the controller */ 333 cfg = readl(host->regs + SD_EMMC_CFG); 334 cfg &= ~CFG_STOP_CLOCK; 335 writel(cfg, host->regs + SD_EMMC_CFG); 336 } 337 338 static int meson_mmc_clk_set(struct meson_host *host, unsigned long rate, 339 bool ddr) 340 { 341 struct mmc_host *mmc = host->mmc; 342 int ret; 343 u32 cfg; 344 345 /* Same request - bail-out */ 346 if (host->ddr == ddr && host->req_rate == rate) 347 return 0; 348 349 /* stop clock */ 350 meson_mmc_clk_gate(host); 351 host->req_rate = 0; 352 mmc->actual_clock = 0; 353 354 /* return with clock being stopped */ 355 if (!rate) 356 return 0; 357 358 /* Stop the clock during rate change to avoid glitches */ 359 cfg = readl(host->regs + SD_EMMC_CFG); 360 cfg |= CFG_STOP_CLOCK; 361 writel(cfg, host->regs + SD_EMMC_CFG); 362 363 if (ddr) { 364 /* DDR modes require higher module clock */ 365 rate <<= 1; 366 cfg |= CFG_DDR; 367 } else { 368 cfg &= ~CFG_DDR; 369 } 370 writel(cfg, host->regs + SD_EMMC_CFG); 371 host->ddr = ddr; 372 373 ret = clk_set_rate(host->mmc_clk, rate); 374 if (ret) { 375 dev_err(host->dev, "Unable to set cfg_div_clk to %lu. ret=%d\n", 376 rate, ret); 377 return ret; 378 } 379 380 host->req_rate = rate; 381 mmc->actual_clock = clk_get_rate(host->mmc_clk); 382 383 /* We should report the real output frequency of the controller */ 384 if (ddr) { 385 host->req_rate >>= 1; 386 mmc->actual_clock >>= 1; 387 } 388 389 dev_dbg(host->dev, "clk rate: %u Hz\n", mmc->actual_clock); 390 if (rate != mmc->actual_clock) 391 dev_dbg(host->dev, "requested rate was %lu\n", rate); 392 393 /* (re)start clock */ 394 meson_mmc_clk_ungate(host); 395 396 return 0; 397 } 398 399 /* 400 * The SD/eMMC IP block has an internal mux and divider used for 401 * generating the MMC clock. Use the clock framework to create and 402 * manage these clocks. 403 */ 404 static int meson_mmc_clk_init(struct meson_host *host) 405 { 406 struct clk_init_data init; 407 struct clk_mux *mux; 408 struct clk_divider *div; 409 char clk_name[32]; 410 int i, ret = 0; 411 const char *mux_parent_names[MUX_CLK_NUM_PARENTS]; 412 const char *clk_parent[1]; 413 u32 clk_reg; 414 415 /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */ 416 clk_reg = CLK_ALWAYS_ON(host); 417 clk_reg |= CLK_DIV_MASK; 418 clk_reg |= FIELD_PREP(CLK_CORE_PHASE_MASK, CLK_PHASE_180); 419 clk_reg |= FIELD_PREP(CLK_TX_PHASE_MASK, CLK_PHASE_0); 420 clk_reg |= FIELD_PREP(CLK_RX_PHASE_MASK, CLK_PHASE_0); 421 writel(clk_reg, host->regs + SD_EMMC_CLOCK); 422 423 /* get the mux parents */ 424 for (i = 0; i < MUX_CLK_NUM_PARENTS; i++) { 425 struct clk *clk; 426 char name[16]; 427 428 snprintf(name, sizeof(name), "clkin%d", i); 429 clk = devm_clk_get(host->dev, name); 430 if (IS_ERR(clk)) { 431 if (clk != ERR_PTR(-EPROBE_DEFER)) 432 dev_err(host->dev, "Missing clock %s\n", name); 433 return PTR_ERR(clk); 434 } 435 436 mux_parent_names[i] = __clk_get_name(clk); 437 } 438 439 /* create the mux */ 440 mux = devm_kzalloc(host->dev, sizeof(*mux), GFP_KERNEL); 441 if (!mux) 442 return -ENOMEM; 443 444 snprintf(clk_name, sizeof(clk_name), "%s#mux", dev_name(host->dev)); 445 init.name = clk_name; 446 init.ops = &clk_mux_ops; 447 init.flags = 0; 448 init.parent_names = mux_parent_names; 449 init.num_parents = MUX_CLK_NUM_PARENTS; 450 451 mux->reg = host->regs + SD_EMMC_CLOCK; 452 mux->shift = __ffs(CLK_SRC_MASK); 453 mux->mask = CLK_SRC_MASK >> mux->shift; 454 mux->hw.init = &init; 455 456 host->mux_clk = devm_clk_register(host->dev, &mux->hw); 457 if (WARN_ON(IS_ERR(host->mux_clk))) 458 return PTR_ERR(host->mux_clk); 459 460 /* create the divider */ 461 div = devm_kzalloc(host->dev, sizeof(*div), GFP_KERNEL); 462 if (!div) 463 return -ENOMEM; 464 465 snprintf(clk_name, sizeof(clk_name), "%s#div", dev_name(host->dev)); 466 init.name = clk_name; 467 init.ops = &clk_divider_ops; 468 init.flags = CLK_SET_RATE_PARENT; 469 clk_parent[0] = __clk_get_name(host->mux_clk); 470 init.parent_names = clk_parent; 471 init.num_parents = 1; 472 473 div->reg = host->regs + SD_EMMC_CLOCK; 474 div->shift = __ffs(CLK_DIV_MASK); 475 div->width = __builtin_popcountl(CLK_DIV_MASK); 476 div->hw.init = &init; 477 div->flags = CLK_DIVIDER_ONE_BASED; 478 479 host->mmc_clk = devm_clk_register(host->dev, &div->hw); 480 if (WARN_ON(IS_ERR(host->mmc_clk))) 481 return PTR_ERR(host->mmc_clk); 482 483 /* init SD_EMMC_CLOCK to sane defaults w/min clock rate */ 484 host->mmc->f_min = clk_round_rate(host->mmc_clk, 400000); 485 ret = clk_set_rate(host->mmc_clk, host->mmc->f_min); 486 if (ret) 487 return ret; 488 489 return clk_prepare_enable(host->mmc_clk); 490 } 491 492 static void meson_mmc_disable_resampling(struct meson_host *host) 493 { 494 unsigned int val = readl(host->regs + host->data->adjust); 495 496 val &= ~ADJUST_ADJ_EN; 497 writel(val, host->regs + host->data->adjust); 498 } 499 500 static void meson_mmc_reset_resampling(struct meson_host *host) 501 { 502 unsigned int val; 503 504 meson_mmc_disable_resampling(host); 505 506 val = readl(host->regs + host->data->adjust); 507 val &= ~ADJUST_ADJ_DELAY_MASK; 508 writel(val, host->regs + host->data->adjust); 509 } 510 511 static int meson_mmc_resampling_tuning(struct mmc_host *mmc, u32 opcode) 512 { 513 struct meson_host *host = mmc_priv(mmc); 514 unsigned int val, dly, max_dly, i; 515 int ret; 516 517 /* Resampling is done using the source clock */ 518 max_dly = DIV_ROUND_UP(clk_get_rate(host->mux_clk), 519 clk_get_rate(host->mmc_clk)); 520 521 val = readl(host->regs + host->data->adjust); 522 val |= ADJUST_ADJ_EN; 523 writel(val, host->regs + host->data->adjust); 524 525 if (mmc->doing_retune) 526 dly = FIELD_GET(ADJUST_ADJ_DELAY_MASK, val) + 1; 527 else 528 dly = 0; 529 530 for (i = 0; i < max_dly; i++) { 531 val &= ~ADJUST_ADJ_DELAY_MASK; 532 val |= FIELD_PREP(ADJUST_ADJ_DELAY_MASK, (dly + i) % max_dly); 533 writel(val, host->regs + host->data->adjust); 534 535 ret = mmc_send_tuning(mmc, opcode, NULL); 536 if (!ret) { 537 dev_dbg(mmc_dev(mmc), "resampling delay: %u\n", 538 (dly + i) % max_dly); 539 return 0; 540 } 541 } 542 543 meson_mmc_reset_resampling(host); 544 return -EIO; 545 } 546 547 static int meson_mmc_prepare_ios_clock(struct meson_host *host, 548 struct mmc_ios *ios) 549 { 550 bool ddr; 551 552 switch (ios->timing) { 553 case MMC_TIMING_MMC_DDR52: 554 case MMC_TIMING_UHS_DDR50: 555 ddr = true; 556 break; 557 558 default: 559 ddr = false; 560 break; 561 } 562 563 return meson_mmc_clk_set(host, ios->clock, ddr); 564 } 565 566 static void meson_mmc_check_resampling(struct meson_host *host, 567 struct mmc_ios *ios) 568 { 569 switch (ios->timing) { 570 case MMC_TIMING_LEGACY: 571 case MMC_TIMING_MMC_HS: 572 case MMC_TIMING_SD_HS: 573 case MMC_TIMING_MMC_DDR52: 574 meson_mmc_disable_resampling(host); 575 break; 576 } 577 } 578 579 static void meson_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) 580 { 581 struct meson_host *host = mmc_priv(mmc); 582 u32 bus_width, val; 583 int err; 584 585 /* 586 * GPIO regulator, only controls switching between 1v8 and 587 * 3v3, doesn't support MMC_POWER_OFF, MMC_POWER_ON. 588 */ 589 switch (ios->power_mode) { 590 case MMC_POWER_OFF: 591 if (!IS_ERR(mmc->supply.vmmc)) 592 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); 593 594 if (!IS_ERR(mmc->supply.vqmmc) && host->vqmmc_enabled) { 595 regulator_disable(mmc->supply.vqmmc); 596 host->vqmmc_enabled = false; 597 } 598 599 break; 600 601 case MMC_POWER_UP: 602 if (!IS_ERR(mmc->supply.vmmc)) 603 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd); 604 605 break; 606 607 case MMC_POWER_ON: 608 if (!IS_ERR(mmc->supply.vqmmc) && !host->vqmmc_enabled) { 609 int ret = regulator_enable(mmc->supply.vqmmc); 610 611 if (ret < 0) 612 dev_err(host->dev, 613 "failed to enable vqmmc regulator\n"); 614 else 615 host->vqmmc_enabled = true; 616 } 617 618 break; 619 } 620 621 /* Bus width */ 622 switch (ios->bus_width) { 623 case MMC_BUS_WIDTH_1: 624 bus_width = CFG_BUS_WIDTH_1; 625 break; 626 case MMC_BUS_WIDTH_4: 627 bus_width = CFG_BUS_WIDTH_4; 628 break; 629 case MMC_BUS_WIDTH_8: 630 bus_width = CFG_BUS_WIDTH_8; 631 break; 632 default: 633 dev_err(host->dev, "Invalid ios->bus_width: %u. Setting to 4.\n", 634 ios->bus_width); 635 bus_width = CFG_BUS_WIDTH_4; 636 } 637 638 val = readl(host->regs + SD_EMMC_CFG); 639 val &= ~CFG_BUS_WIDTH_MASK; 640 val |= FIELD_PREP(CFG_BUS_WIDTH_MASK, bus_width); 641 writel(val, host->regs + SD_EMMC_CFG); 642 643 meson_mmc_check_resampling(host, ios); 644 err = meson_mmc_prepare_ios_clock(host, ios); 645 if (err) 646 dev_err(host->dev, "Failed to set clock: %d\n,", err); 647 648 dev_dbg(host->dev, "SD_EMMC_CFG: 0x%08x\n", val); 649 } 650 651 static void meson_mmc_request_done(struct mmc_host *mmc, 652 struct mmc_request *mrq) 653 { 654 struct meson_host *host = mmc_priv(mmc); 655 656 host->cmd = NULL; 657 mmc_request_done(host->mmc, mrq); 658 } 659 660 static void meson_mmc_set_blksz(struct mmc_host *mmc, unsigned int blksz) 661 { 662 struct meson_host *host = mmc_priv(mmc); 663 u32 cfg, blksz_old; 664 665 cfg = readl(host->regs + SD_EMMC_CFG); 666 blksz_old = FIELD_GET(CFG_BLK_LEN_MASK, cfg); 667 668 if (!is_power_of_2(blksz)) 669 dev_err(host->dev, "blksz %u is not a power of 2\n", blksz); 670 671 blksz = ilog2(blksz); 672 673 /* check if block-size matches, if not update */ 674 if (blksz == blksz_old) 675 return; 676 677 dev_dbg(host->dev, "%s: update blk_len %d -> %d\n", __func__, 678 blksz_old, blksz); 679 680 cfg &= ~CFG_BLK_LEN_MASK; 681 cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, blksz); 682 writel(cfg, host->regs + SD_EMMC_CFG); 683 } 684 685 static void meson_mmc_set_response_bits(struct mmc_command *cmd, u32 *cmd_cfg) 686 { 687 if (cmd->flags & MMC_RSP_PRESENT) { 688 if (cmd->flags & MMC_RSP_136) 689 *cmd_cfg |= CMD_CFG_RESP_128; 690 *cmd_cfg |= CMD_CFG_RESP_NUM; 691 692 if (!(cmd->flags & MMC_RSP_CRC)) 693 *cmd_cfg |= CMD_CFG_RESP_NOCRC; 694 695 if (cmd->flags & MMC_RSP_BUSY) 696 *cmd_cfg |= CMD_CFG_R1B; 697 } else { 698 *cmd_cfg |= CMD_CFG_NO_RESP; 699 } 700 } 701 702 static void meson_mmc_desc_chain_transfer(struct mmc_host *mmc, u32 cmd_cfg) 703 { 704 struct meson_host *host = mmc_priv(mmc); 705 struct sd_emmc_desc *desc = host->descs; 706 struct mmc_data *data = host->cmd->data; 707 struct scatterlist *sg; 708 u32 start; 709 int i; 710 711 if (data->flags & MMC_DATA_WRITE) 712 cmd_cfg |= CMD_CFG_DATA_WR; 713 714 if (data->blocks > 1) { 715 cmd_cfg |= CMD_CFG_BLOCK_MODE; 716 meson_mmc_set_blksz(mmc, data->blksz); 717 } 718 719 for_each_sg(data->sg, sg, data->sg_count, i) { 720 unsigned int len = sg_dma_len(sg); 721 722 if (data->blocks > 1) 723 len /= data->blksz; 724 725 desc[i].cmd_cfg = cmd_cfg; 726 desc[i].cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, len); 727 if (i > 0) 728 desc[i].cmd_cfg |= CMD_CFG_NO_CMD; 729 desc[i].cmd_arg = host->cmd->arg; 730 desc[i].cmd_resp = 0; 731 desc[i].cmd_data = sg_dma_address(sg); 732 } 733 desc[data->sg_count - 1].cmd_cfg |= CMD_CFG_END_OF_CHAIN; 734 735 dma_wmb(); /* ensure descriptor is written before kicked */ 736 start = host->descs_dma_addr | START_DESC_BUSY; 737 writel(start, host->regs + SD_EMMC_START); 738 } 739 740 static void meson_mmc_start_cmd(struct mmc_host *mmc, struct mmc_command *cmd) 741 { 742 struct meson_host *host = mmc_priv(mmc); 743 struct mmc_data *data = cmd->data; 744 u32 cmd_cfg = 0, cmd_data = 0; 745 unsigned int xfer_bytes = 0; 746 747 /* Setup descriptors */ 748 dma_rmb(); 749 750 host->cmd = cmd; 751 752 cmd_cfg |= FIELD_PREP(CMD_CFG_CMD_INDEX_MASK, cmd->opcode); 753 cmd_cfg |= CMD_CFG_OWNER; /* owned by CPU */ 754 cmd_cfg |= CMD_CFG_ERROR; /* stop in case of error */ 755 756 meson_mmc_set_response_bits(cmd, &cmd_cfg); 757 758 /* data? */ 759 if (data) { 760 data->bytes_xfered = 0; 761 cmd_cfg |= CMD_CFG_DATA_IO; 762 cmd_cfg |= FIELD_PREP(CMD_CFG_TIMEOUT_MASK, 763 ilog2(meson_mmc_get_timeout_msecs(data))); 764 765 if (meson_mmc_desc_chain_mode(data)) { 766 meson_mmc_desc_chain_transfer(mmc, cmd_cfg); 767 return; 768 } 769 770 if (data->blocks > 1) { 771 cmd_cfg |= CMD_CFG_BLOCK_MODE; 772 cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, 773 data->blocks); 774 meson_mmc_set_blksz(mmc, data->blksz); 775 } else { 776 cmd_cfg |= FIELD_PREP(CMD_CFG_LENGTH_MASK, data->blksz); 777 } 778 779 xfer_bytes = data->blksz * data->blocks; 780 if (data->flags & MMC_DATA_WRITE) { 781 cmd_cfg |= CMD_CFG_DATA_WR; 782 WARN_ON(xfer_bytes > host->bounce_buf_size); 783 sg_copy_to_buffer(data->sg, data->sg_len, 784 host->bounce_buf, xfer_bytes); 785 dma_wmb(); 786 } 787 788 cmd_data = host->bounce_dma_addr & CMD_DATA_MASK; 789 } else { 790 cmd_cfg |= FIELD_PREP(CMD_CFG_TIMEOUT_MASK, 791 ilog2(SD_EMMC_CMD_TIMEOUT)); 792 } 793 794 /* Last descriptor */ 795 cmd_cfg |= CMD_CFG_END_OF_CHAIN; 796 writel(cmd_cfg, host->regs + SD_EMMC_CMD_CFG); 797 writel(cmd_data, host->regs + SD_EMMC_CMD_DAT); 798 writel(0, host->regs + SD_EMMC_CMD_RSP); 799 wmb(); /* ensure descriptor is written before kicked */ 800 writel(cmd->arg, host->regs + SD_EMMC_CMD_ARG); 801 } 802 803 static void meson_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) 804 { 805 struct meson_host *host = mmc_priv(mmc); 806 bool needs_pre_post_req = mrq->data && 807 !(mrq->data->host_cookie & SD_EMMC_PRE_REQ_DONE); 808 809 if (needs_pre_post_req) { 810 meson_mmc_get_transfer_mode(mmc, mrq); 811 if (!meson_mmc_desc_chain_mode(mrq->data)) 812 needs_pre_post_req = false; 813 } 814 815 if (needs_pre_post_req) 816 meson_mmc_pre_req(mmc, mrq); 817 818 /* Stop execution */ 819 writel(0, host->regs + SD_EMMC_START); 820 821 meson_mmc_start_cmd(mmc, mrq->sbc ?: mrq->cmd); 822 823 if (needs_pre_post_req) 824 meson_mmc_post_req(mmc, mrq, 0); 825 } 826 827 static void meson_mmc_read_resp(struct mmc_host *mmc, struct mmc_command *cmd) 828 { 829 struct meson_host *host = mmc_priv(mmc); 830 831 if (cmd->flags & MMC_RSP_136) { 832 cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP3); 833 cmd->resp[1] = readl(host->regs + SD_EMMC_CMD_RSP2); 834 cmd->resp[2] = readl(host->regs + SD_EMMC_CMD_RSP1); 835 cmd->resp[3] = readl(host->regs + SD_EMMC_CMD_RSP); 836 } else if (cmd->flags & MMC_RSP_PRESENT) { 837 cmd->resp[0] = readl(host->regs + SD_EMMC_CMD_RSP); 838 } 839 } 840 841 static irqreturn_t meson_mmc_irq(int irq, void *dev_id) 842 { 843 struct meson_host *host = dev_id; 844 struct mmc_command *cmd; 845 struct mmc_data *data; 846 u32 irq_en, status, raw_status; 847 irqreturn_t ret = IRQ_NONE; 848 849 irq_en = readl(host->regs + SD_EMMC_IRQ_EN); 850 raw_status = readl(host->regs + SD_EMMC_STATUS); 851 status = raw_status & irq_en; 852 853 if (!status) { 854 dev_dbg(host->dev, 855 "Unexpected IRQ! irq_en 0x%08x - status 0x%08x\n", 856 irq_en, raw_status); 857 return IRQ_NONE; 858 } 859 860 if (WARN_ON(!host) || WARN_ON(!host->cmd)) 861 return IRQ_NONE; 862 863 /* ack all raised interrupts */ 864 writel(status, host->regs + SD_EMMC_STATUS); 865 866 cmd = host->cmd; 867 data = cmd->data; 868 cmd->error = 0; 869 if (status & IRQ_CRC_ERR) { 870 dev_dbg(host->dev, "CRC Error - status 0x%08x\n", status); 871 cmd->error = -EILSEQ; 872 ret = IRQ_WAKE_THREAD; 873 goto out; 874 } 875 876 if (status & IRQ_TIMEOUTS) { 877 dev_dbg(host->dev, "Timeout - status 0x%08x\n", status); 878 cmd->error = -ETIMEDOUT; 879 ret = IRQ_WAKE_THREAD; 880 goto out; 881 } 882 883 meson_mmc_read_resp(host->mmc, cmd); 884 885 if (status & IRQ_SDIO) { 886 dev_dbg(host->dev, "IRQ: SDIO TODO.\n"); 887 ret = IRQ_HANDLED; 888 } 889 890 if (status & (IRQ_END_OF_CHAIN | IRQ_RESP_STATUS)) { 891 if (data && !cmd->error) 892 data->bytes_xfered = data->blksz * data->blocks; 893 if (meson_mmc_bounce_buf_read(data) || 894 meson_mmc_get_next_command(cmd)) 895 ret = IRQ_WAKE_THREAD; 896 else 897 ret = IRQ_HANDLED; 898 } 899 900 out: 901 if (cmd->error) { 902 /* Stop desc in case of errors */ 903 u32 start = readl(host->regs + SD_EMMC_START); 904 905 start &= ~START_DESC_BUSY; 906 writel(start, host->regs + SD_EMMC_START); 907 } 908 909 if (ret == IRQ_HANDLED) 910 meson_mmc_request_done(host->mmc, cmd->mrq); 911 912 return ret; 913 } 914 915 static int meson_mmc_wait_desc_stop(struct meson_host *host) 916 { 917 u32 status; 918 919 /* 920 * It may sometimes take a while for it to actually halt. Here, we 921 * are giving it 5ms to comply 922 * 923 * If we don't confirm the descriptor is stopped, it might raise new 924 * IRQs after we have called mmc_request_done() which is bad. 925 */ 926 927 return readl_poll_timeout(host->regs + SD_EMMC_STATUS, status, 928 !(status & (STATUS_BUSY | STATUS_DESC_BUSY)), 929 100, 5000); 930 } 931 932 static irqreturn_t meson_mmc_irq_thread(int irq, void *dev_id) 933 { 934 struct meson_host *host = dev_id; 935 struct mmc_command *next_cmd, *cmd = host->cmd; 936 struct mmc_data *data; 937 unsigned int xfer_bytes; 938 939 if (WARN_ON(!cmd)) 940 return IRQ_NONE; 941 942 if (cmd->error) { 943 meson_mmc_wait_desc_stop(host); 944 meson_mmc_request_done(host->mmc, cmd->mrq); 945 946 return IRQ_HANDLED; 947 } 948 949 data = cmd->data; 950 if (meson_mmc_bounce_buf_read(data)) { 951 xfer_bytes = data->blksz * data->blocks; 952 WARN_ON(xfer_bytes > host->bounce_buf_size); 953 sg_copy_from_buffer(data->sg, data->sg_len, 954 host->bounce_buf, xfer_bytes); 955 } 956 957 next_cmd = meson_mmc_get_next_command(cmd); 958 if (next_cmd) 959 meson_mmc_start_cmd(host->mmc, next_cmd); 960 else 961 meson_mmc_request_done(host->mmc, cmd->mrq); 962 963 return IRQ_HANDLED; 964 } 965 966 /* 967 * NOTE: we only need this until the GPIO/pinctrl driver can handle 968 * interrupts. For now, the MMC core will use this for polling. 969 */ 970 static int meson_mmc_get_cd(struct mmc_host *mmc) 971 { 972 int status = mmc_gpio_get_cd(mmc); 973 974 if (status == -ENOSYS) 975 return 1; /* assume present */ 976 977 return status; 978 } 979 980 static void meson_mmc_cfg_init(struct meson_host *host) 981 { 982 u32 cfg = 0; 983 984 cfg |= FIELD_PREP(CFG_RESP_TIMEOUT_MASK, 985 ilog2(SD_EMMC_CFG_RESP_TIMEOUT)); 986 cfg |= FIELD_PREP(CFG_RC_CC_MASK, ilog2(SD_EMMC_CFG_CMD_GAP)); 987 cfg |= FIELD_PREP(CFG_BLK_LEN_MASK, ilog2(SD_EMMC_CFG_BLK_SIZE)); 988 989 /* abort chain on R/W errors */ 990 cfg |= CFG_ERR_ABORT; 991 992 writel(cfg, host->regs + SD_EMMC_CFG); 993 } 994 995 static int meson_mmc_card_busy(struct mmc_host *mmc) 996 { 997 struct meson_host *host = mmc_priv(mmc); 998 u32 regval; 999 1000 regval = readl(host->regs + SD_EMMC_STATUS); 1001 1002 /* We are only interrested in lines 0 to 3, so mask the other ones */ 1003 return !(FIELD_GET(STATUS_DATI, regval) & 0xf); 1004 } 1005 1006 static int meson_mmc_voltage_switch(struct mmc_host *mmc, struct mmc_ios *ios) 1007 { 1008 /* vqmmc regulator is available */ 1009 if (!IS_ERR(mmc->supply.vqmmc)) { 1010 /* 1011 * The usual amlogic setup uses a GPIO to switch from one 1012 * regulator to the other. While the voltage ramp up is 1013 * pretty fast, care must be taken when switching from 3.3v 1014 * to 1.8v. Please make sure the regulator framework is aware 1015 * of your own regulator constraints 1016 */ 1017 return mmc_regulator_set_vqmmc(mmc, ios); 1018 } 1019 1020 /* no vqmmc regulator, assume fixed regulator at 3/3.3V */ 1021 if (ios->signal_voltage == MMC_SIGNAL_VOLTAGE_330) 1022 return 0; 1023 1024 return -EINVAL; 1025 } 1026 1027 static const struct mmc_host_ops meson_mmc_ops = { 1028 .request = meson_mmc_request, 1029 .set_ios = meson_mmc_set_ios, 1030 .get_cd = meson_mmc_get_cd, 1031 .pre_req = meson_mmc_pre_req, 1032 .post_req = meson_mmc_post_req, 1033 .execute_tuning = meson_mmc_resampling_tuning, 1034 .card_busy = meson_mmc_card_busy, 1035 .start_signal_voltage_switch = meson_mmc_voltage_switch, 1036 }; 1037 1038 static int meson_mmc_probe(struct platform_device *pdev) 1039 { 1040 struct resource *res; 1041 struct meson_host *host; 1042 struct mmc_host *mmc; 1043 int ret; 1044 1045 mmc = mmc_alloc_host(sizeof(struct meson_host), &pdev->dev); 1046 if (!mmc) 1047 return -ENOMEM; 1048 host = mmc_priv(mmc); 1049 host->mmc = mmc; 1050 host->dev = &pdev->dev; 1051 dev_set_drvdata(&pdev->dev, host); 1052 1053 /* The G12A SDIO Controller needs an SRAM bounce buffer */ 1054 host->dram_access_quirk = device_property_read_bool(&pdev->dev, 1055 "amlogic,dram-access-quirk"); 1056 1057 /* Get regulators and the supported OCR mask */ 1058 host->vqmmc_enabled = false; 1059 ret = mmc_regulator_get_supply(mmc); 1060 if (ret) 1061 goto free_host; 1062 1063 ret = mmc_of_parse(mmc); 1064 if (ret) { 1065 if (ret != -EPROBE_DEFER) 1066 dev_warn(&pdev->dev, "error parsing DT: %d\n", ret); 1067 goto free_host; 1068 } 1069 1070 host->data = (struct meson_mmc_data *) 1071 of_device_get_match_data(&pdev->dev); 1072 if (!host->data) { 1073 ret = -EINVAL; 1074 goto free_host; 1075 } 1076 1077 ret = device_reset_optional(&pdev->dev); 1078 if (ret) { 1079 if (ret != -EPROBE_DEFER) 1080 dev_err(&pdev->dev, "device reset failed: %d\n", ret); 1081 1082 return ret; 1083 } 1084 1085 res = platform_get_resource(pdev, IORESOURCE_MEM, 0); 1086 host->regs = devm_ioremap_resource(&pdev->dev, res); 1087 if (IS_ERR(host->regs)) { 1088 ret = PTR_ERR(host->regs); 1089 goto free_host; 1090 } 1091 1092 host->irq = platform_get_irq(pdev, 0); 1093 if (host->irq <= 0) { 1094 ret = -EINVAL; 1095 goto free_host; 1096 } 1097 1098 host->pinctrl = devm_pinctrl_get(&pdev->dev); 1099 if (IS_ERR(host->pinctrl)) { 1100 ret = PTR_ERR(host->pinctrl); 1101 goto free_host; 1102 } 1103 1104 host->pins_default = pinctrl_lookup_state(host->pinctrl, 1105 PINCTRL_STATE_DEFAULT); 1106 if (IS_ERR(host->pins_default)) { 1107 ret = PTR_ERR(host->pins_default); 1108 goto free_host; 1109 } 1110 1111 host->pins_clk_gate = pinctrl_lookup_state(host->pinctrl, 1112 "clk-gate"); 1113 if (IS_ERR(host->pins_clk_gate)) { 1114 dev_warn(&pdev->dev, 1115 "can't get clk-gate pinctrl, using clk_stop bit\n"); 1116 host->pins_clk_gate = NULL; 1117 } 1118 1119 host->core_clk = devm_clk_get(&pdev->dev, "core"); 1120 if (IS_ERR(host->core_clk)) { 1121 ret = PTR_ERR(host->core_clk); 1122 goto free_host; 1123 } 1124 1125 ret = clk_prepare_enable(host->core_clk); 1126 if (ret) 1127 goto free_host; 1128 1129 ret = meson_mmc_clk_init(host); 1130 if (ret) 1131 goto err_core_clk; 1132 1133 /* set config to sane default */ 1134 meson_mmc_cfg_init(host); 1135 1136 /* Stop execution */ 1137 writel(0, host->regs + SD_EMMC_START); 1138 1139 /* clear, ack and enable interrupts */ 1140 writel(0, host->regs + SD_EMMC_IRQ_EN); 1141 writel(IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN, 1142 host->regs + SD_EMMC_STATUS); 1143 writel(IRQ_CRC_ERR | IRQ_TIMEOUTS | IRQ_END_OF_CHAIN, 1144 host->regs + SD_EMMC_IRQ_EN); 1145 1146 ret = request_threaded_irq(host->irq, meson_mmc_irq, 1147 meson_mmc_irq_thread, IRQF_ONESHOT, 1148 dev_name(&pdev->dev), host); 1149 if (ret) 1150 goto err_init_clk; 1151 1152 mmc->caps |= MMC_CAP_CMD23; 1153 if (host->dram_access_quirk) { 1154 /* Limit to the available sram memory */ 1155 mmc->max_segs = SD_EMMC_SRAM_DATA_BUF_LEN / mmc->max_blk_size; 1156 mmc->max_blk_count = mmc->max_segs; 1157 } else { 1158 mmc->max_blk_count = CMD_CFG_LENGTH_MASK; 1159 mmc->max_segs = SD_EMMC_DESC_BUF_LEN / 1160 sizeof(struct sd_emmc_desc); 1161 } 1162 mmc->max_req_size = mmc->max_blk_count * mmc->max_blk_size; 1163 mmc->max_seg_size = mmc->max_req_size; 1164 1165 /* 1166 * At the moment, we don't know how to reliably enable HS400. 1167 * From the different datasheets, it is not even clear if this mode 1168 * is officially supported by any of the SoCs 1169 */ 1170 mmc->caps2 &= ~MMC_CAP2_HS400; 1171 1172 if (host->dram_access_quirk) { 1173 /* 1174 * The MMC Controller embeds 1,5KiB of internal SRAM 1175 * that can be used to be used as bounce buffer. 1176 * In the case of the G12A SDIO controller, use these 1177 * instead of the DDR memory 1178 */ 1179 host->bounce_buf_size = SD_EMMC_SRAM_DATA_BUF_LEN; 1180 host->bounce_buf = host->regs + SD_EMMC_SRAM_DATA_BUF_OFF; 1181 host->bounce_dma_addr = res->start + SD_EMMC_SRAM_DATA_BUF_OFF; 1182 } else { 1183 /* data bounce buffer */ 1184 host->bounce_buf_size = mmc->max_req_size; 1185 host->bounce_buf = 1186 dma_alloc_coherent(host->dev, host->bounce_buf_size, 1187 &host->bounce_dma_addr, GFP_KERNEL); 1188 if (host->bounce_buf == NULL) { 1189 dev_err(host->dev, "Unable to map allocate DMA bounce buffer.\n"); 1190 ret = -ENOMEM; 1191 goto err_free_irq; 1192 } 1193 } 1194 1195 host->descs = dma_alloc_coherent(host->dev, SD_EMMC_DESC_BUF_LEN, 1196 &host->descs_dma_addr, GFP_KERNEL); 1197 if (!host->descs) { 1198 dev_err(host->dev, "Allocating descriptor DMA buffer failed\n"); 1199 ret = -ENOMEM; 1200 goto err_bounce_buf; 1201 } 1202 1203 mmc->ops = &meson_mmc_ops; 1204 mmc_add_host(mmc); 1205 1206 return 0; 1207 1208 err_bounce_buf: 1209 if (!host->dram_access_quirk) 1210 dma_free_coherent(host->dev, host->bounce_buf_size, 1211 host->bounce_buf, host->bounce_dma_addr); 1212 err_free_irq: 1213 free_irq(host->irq, host); 1214 err_init_clk: 1215 clk_disable_unprepare(host->mmc_clk); 1216 err_core_clk: 1217 clk_disable_unprepare(host->core_clk); 1218 free_host: 1219 mmc_free_host(mmc); 1220 return ret; 1221 } 1222 1223 static int meson_mmc_remove(struct platform_device *pdev) 1224 { 1225 struct meson_host *host = dev_get_drvdata(&pdev->dev); 1226 1227 mmc_remove_host(host->mmc); 1228 1229 /* disable interrupts */ 1230 writel(0, host->regs + SD_EMMC_IRQ_EN); 1231 free_irq(host->irq, host); 1232 1233 dma_free_coherent(host->dev, SD_EMMC_DESC_BUF_LEN, 1234 host->descs, host->descs_dma_addr); 1235 1236 if (!host->dram_access_quirk) 1237 dma_free_coherent(host->dev, host->bounce_buf_size, 1238 host->bounce_buf, host->bounce_dma_addr); 1239 1240 clk_disable_unprepare(host->mmc_clk); 1241 clk_disable_unprepare(host->core_clk); 1242 1243 mmc_free_host(host->mmc); 1244 return 0; 1245 } 1246 1247 static const struct meson_mmc_data meson_gx_data = { 1248 .tx_delay_mask = CLK_V2_TX_DELAY_MASK, 1249 .rx_delay_mask = CLK_V2_RX_DELAY_MASK, 1250 .always_on = CLK_V2_ALWAYS_ON, 1251 .adjust = SD_EMMC_ADJUST, 1252 }; 1253 1254 static const struct meson_mmc_data meson_axg_data = { 1255 .tx_delay_mask = CLK_V3_TX_DELAY_MASK, 1256 .rx_delay_mask = CLK_V3_RX_DELAY_MASK, 1257 .always_on = CLK_V3_ALWAYS_ON, 1258 .adjust = SD_EMMC_V3_ADJUST, 1259 }; 1260 1261 static const struct of_device_id meson_mmc_of_match[] = { 1262 { .compatible = "amlogic,meson-gx-mmc", .data = &meson_gx_data }, 1263 { .compatible = "amlogic,meson-gxbb-mmc", .data = &meson_gx_data }, 1264 { .compatible = "amlogic,meson-gxl-mmc", .data = &meson_gx_data }, 1265 { .compatible = "amlogic,meson-gxm-mmc", .data = &meson_gx_data }, 1266 { .compatible = "amlogic,meson-axg-mmc", .data = &meson_axg_data }, 1267 {} 1268 }; 1269 MODULE_DEVICE_TABLE(of, meson_mmc_of_match); 1270 1271 static struct platform_driver meson_mmc_driver = { 1272 .probe = meson_mmc_probe, 1273 .remove = meson_mmc_remove, 1274 .driver = { 1275 .name = DRIVER_NAME, 1276 .of_match_table = of_match_ptr(meson_mmc_of_match), 1277 }, 1278 }; 1279 1280 module_platform_driver(meson_mmc_driver); 1281 1282 MODULE_DESCRIPTION("Amlogic S905*/GX*/AXG SD/eMMC driver"); 1283 MODULE_AUTHOR("Kevin Hilman <khilman@baylibre.com>"); 1284 MODULE_LICENSE("GPL v2"); 1285