1 /* 2 * cb710/mmc.c 3 * 4 * Copyright by Michał Mirosław, 2008-2009 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 as 8 * published by the Free Software Foundation. 9 */ 10 #include <linux/kernel.h> 11 #include <linux/module.h> 12 #include <linux/pci.h> 13 #include <linux/delay.h> 14 #include "cb710-mmc.h" 15 16 static const u8 cb710_clock_divider_log2[8] = { 17 /* 1, 2, 4, 8, 16, 32, 128, 512 */ 18 0, 1, 2, 3, 4, 5, 7, 9 19 }; 20 #define CB710_MAX_DIVIDER_IDX \ 21 (ARRAY_SIZE(cb710_clock_divider_log2) - 1) 22 23 static const u8 cb710_src_freq_mhz[16] = { 24 33, 10, 20, 25, 30, 35, 40, 45, 25 50, 55, 60, 65, 70, 75, 80, 85 26 }; 27 28 static void cb710_mmc_select_clock_divider(struct mmc_host *mmc, int hz) 29 { 30 struct cb710_slot *slot = cb710_mmc_to_slot(mmc); 31 struct pci_dev *pdev = cb710_slot_to_chip(slot)->pdev; 32 u32 src_freq_idx; 33 u32 divider_idx; 34 int src_hz; 35 36 /* on CB710 in HP nx9500: 37 * src_freq_idx == 0 38 * indexes 1-7 work as written in the table 39 * indexes 0,8-15 give no clock output 40 */ 41 pci_read_config_dword(pdev, 0x48, &src_freq_idx); 42 src_freq_idx = (src_freq_idx >> 16) & 0xF; 43 src_hz = cb710_src_freq_mhz[src_freq_idx] * 1000000; 44 45 for (divider_idx = 0; divider_idx < CB710_MAX_DIVIDER_IDX; ++divider_idx) { 46 if (hz >= src_hz >> cb710_clock_divider_log2[divider_idx]) 47 break; 48 } 49 50 if (src_freq_idx) 51 divider_idx |= 0x8; 52 else if (divider_idx == 0) 53 divider_idx = 1; 54 55 cb710_pci_update_config_reg(pdev, 0x40, ~0xF0000000, divider_idx << 28); 56 57 dev_dbg(cb710_slot_dev(slot), 58 "clock set to %d Hz, wanted %d Hz; src_freq_idx = %d, divider_idx = %d|%d\n", 59 src_hz >> cb710_clock_divider_log2[divider_idx & 7], 60 hz, src_freq_idx, divider_idx & 7, divider_idx & 8); 61 } 62 63 static void __cb710_mmc_enable_irq(struct cb710_slot *slot, 64 unsigned short enable, unsigned short mask) 65 { 66 /* clear global IE 67 * - it gets set later if any interrupt sources are enabled */ 68 mask |= CB710_MMC_IE_IRQ_ENABLE; 69 70 /* look like interrupt is fired whenever 71 * WORD[0x0C] & WORD[0x10] != 0; 72 * -> bit 15 port 0x0C seems to be global interrupt enable 73 */ 74 75 enable = (cb710_read_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT) 76 & ~mask) | enable; 77 78 if (enable) 79 enable |= CB710_MMC_IE_IRQ_ENABLE; 80 81 cb710_write_port_16(slot, CB710_MMC_IRQ_ENABLE_PORT, enable); 82 } 83 84 static void cb710_mmc_enable_irq(struct cb710_slot *slot, 85 unsigned short enable, unsigned short mask) 86 { 87 struct cb710_mmc_reader *reader = mmc_priv(cb710_slot_to_mmc(slot)); 88 unsigned long flags; 89 90 spin_lock_irqsave(&reader->irq_lock, flags); 91 /* this is the only thing irq_lock protects */ 92 __cb710_mmc_enable_irq(slot, enable, mask); 93 spin_unlock_irqrestore(&reader->irq_lock, flags); 94 } 95 96 static void cb710_mmc_reset_events(struct cb710_slot *slot) 97 { 98 cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, 0xFF); 99 cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, 0xFF); 100 cb710_write_port_8(slot, CB710_MMC_STATUS2_PORT, 0xFF); 101 } 102 103 static void cb710_mmc_enable_4bit_data(struct cb710_slot *slot, int enable) 104 { 105 if (enable) 106 cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 107 CB710_MMC_C1_4BIT_DATA_BUS, 0); 108 else 109 cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 110 0, CB710_MMC_C1_4BIT_DATA_BUS); 111 } 112 113 static int cb710_check_event(struct cb710_slot *slot, u8 what) 114 { 115 u16 status; 116 117 status = cb710_read_port_16(slot, CB710_MMC_STATUS_PORT); 118 119 if (status & CB710_MMC_S0_FIFO_UNDERFLOW) { 120 /* it is just a guess, so log it */ 121 dev_dbg(cb710_slot_dev(slot), 122 "CHECK : ignoring bit 6 in status %04X\n", status); 123 cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, 124 CB710_MMC_S0_FIFO_UNDERFLOW); 125 status &= ~CB710_MMC_S0_FIFO_UNDERFLOW; 126 } 127 128 if (status & CB710_MMC_STATUS_ERROR_EVENTS) { 129 dev_dbg(cb710_slot_dev(slot), 130 "CHECK : returning EIO on status %04X\n", status); 131 cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, status & 0xFF); 132 cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, 133 CB710_MMC_S1_RESET); 134 return -EIO; 135 } 136 137 /* 'what' is a bit in MMC_STATUS1 */ 138 if ((status >> 8) & what) { 139 cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, what); 140 return 1; 141 } 142 143 return 0; 144 } 145 146 static int cb710_wait_for_event(struct cb710_slot *slot, u8 what) 147 { 148 int err = 0; 149 unsigned limit = 2000000; /* FIXME: real timeout */ 150 151 #ifdef CONFIG_CB710_DEBUG 152 u32 e, x; 153 e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT); 154 #endif 155 156 while (!(err = cb710_check_event(slot, what))) { 157 if (!--limit) { 158 cb710_dump_regs(cb710_slot_to_chip(slot), 159 CB710_DUMP_REGS_MMC); 160 err = -ETIMEDOUT; 161 break; 162 } 163 udelay(1); 164 } 165 166 #ifdef CONFIG_CB710_DEBUG 167 x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT); 168 169 limit = 2000000 - limit; 170 if (limit > 100) 171 dev_dbg(cb710_slot_dev(slot), 172 "WAIT10: waited %d loops, what %d, entry val %08X, exit val %08X\n", 173 limit, what, e, x); 174 #endif 175 return err < 0 ? err : 0; 176 } 177 178 179 static int cb710_wait_while_busy(struct cb710_slot *slot, uint8_t mask) 180 { 181 unsigned limit = 500000; /* FIXME: real timeout */ 182 int err = 0; 183 184 #ifdef CONFIG_CB710_DEBUG 185 u32 e, x; 186 e = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT); 187 #endif 188 189 while (cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & mask) { 190 if (!--limit) { 191 cb710_dump_regs(cb710_slot_to_chip(slot), 192 CB710_DUMP_REGS_MMC); 193 err = -ETIMEDOUT; 194 break; 195 } 196 udelay(1); 197 } 198 199 #ifdef CONFIG_CB710_DEBUG 200 x = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT); 201 202 limit = 500000 - limit; 203 if (limit > 100) 204 dev_dbg(cb710_slot_dev(slot), 205 "WAIT12: waited %d loops, mask %02X, entry val %08X, exit val %08X\n", 206 limit, mask, e, x); 207 #endif 208 return err; 209 } 210 211 static void cb710_mmc_set_transfer_size(struct cb710_slot *slot, 212 size_t count, size_t blocksize) 213 { 214 cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); 215 cb710_write_port_32(slot, CB710_MMC_TRANSFER_SIZE_PORT, 216 ((count - 1) << 16)|(blocksize - 1)); 217 218 dev_vdbg(cb710_slot_dev(slot), "set up for %zu block%s of %zu bytes\n", 219 count, count == 1 ? "" : "s", blocksize); 220 } 221 222 static void cb710_mmc_fifo_hack(struct cb710_slot *slot) 223 { 224 /* without this, received data is prepended with 8-bytes of zeroes */ 225 u32 r1, r2; 226 int ok = 0; 227 228 r1 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT); 229 r2 = cb710_read_port_32(slot, CB710_MMC_DATA_PORT); 230 if (cb710_read_port_8(slot, CB710_MMC_STATUS0_PORT) 231 & CB710_MMC_S0_FIFO_UNDERFLOW) { 232 cb710_write_port_8(slot, CB710_MMC_STATUS0_PORT, 233 CB710_MMC_S0_FIFO_UNDERFLOW); 234 ok = 1; 235 } 236 237 dev_dbg(cb710_slot_dev(slot), 238 "FIFO-read-hack: expected STATUS0 bit was %s\n", 239 ok ? "set." : "NOT SET!"); 240 dev_dbg(cb710_slot_dev(slot), 241 "FIFO-read-hack: dwords ignored: %08X %08X - %s\n", 242 r1, r2, (r1|r2) ? "BAD (NOT ZERO)!" : "ok"); 243 } 244 245 static int cb710_mmc_receive_pio(struct cb710_slot *slot, 246 struct sg_mapping_iter *miter, size_t dw_count) 247 { 248 if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) & CB710_MMC_S2_FIFO_READY)) { 249 int err = cb710_wait_for_event(slot, 250 CB710_MMC_S1_PIO_TRANSFER_DONE); 251 if (err) 252 return err; 253 } 254 255 cb710_sg_dwiter_write_from_io(miter, 256 slot->iobase + CB710_MMC_DATA_PORT, dw_count); 257 258 return 0; 259 } 260 261 static bool cb710_is_transfer_size_supported(struct mmc_data *data) 262 { 263 return !(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8)); 264 } 265 266 static int cb710_mmc_receive(struct cb710_slot *slot, struct mmc_data *data) 267 { 268 struct sg_mapping_iter miter; 269 size_t len, blocks = data->blocks; 270 int err = 0; 271 272 /* TODO: I don't know how/if the hardware handles non-16B-boundary blocks 273 * except single 8B block */ 274 if (unlikely(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8))) 275 return -EINVAL; 276 277 sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_TO_SG); 278 279 cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, 280 15, CB710_MMC_C2_READ_PIO_SIZE_MASK); 281 282 cb710_mmc_fifo_hack(slot); 283 284 while (blocks-- > 0) { 285 len = data->blksz; 286 287 while (len >= 16) { 288 err = cb710_mmc_receive_pio(slot, &miter, 4); 289 if (err) 290 goto out; 291 len -= 16; 292 } 293 294 if (!len) 295 continue; 296 297 cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, 298 len - 1, CB710_MMC_C2_READ_PIO_SIZE_MASK); 299 300 len = (len >= 8) ? 4 : 2; 301 err = cb710_mmc_receive_pio(slot, &miter, len); 302 if (err) 303 goto out; 304 } 305 out: 306 sg_miter_stop(&miter); 307 return err; 308 } 309 310 static int cb710_mmc_send(struct cb710_slot *slot, struct mmc_data *data) 311 { 312 struct sg_mapping_iter miter; 313 size_t len, blocks = data->blocks; 314 int err = 0; 315 316 /* TODO: I don't know how/if the hardware handles multiple 317 * non-16B-boundary blocks */ 318 if (unlikely(data->blocks > 1 && data->blksz & 15)) 319 return -EINVAL; 320 321 sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_FROM_SG); 322 323 cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, 324 0, CB710_MMC_C2_READ_PIO_SIZE_MASK); 325 326 while (blocks-- > 0) { 327 len = (data->blksz + 15) >> 4; 328 do { 329 if (!(cb710_read_port_8(slot, CB710_MMC_STATUS2_PORT) 330 & CB710_MMC_S2_FIFO_EMPTY)) { 331 err = cb710_wait_for_event(slot, 332 CB710_MMC_S1_PIO_TRANSFER_DONE); 333 if (err) 334 goto out; 335 } 336 cb710_sg_dwiter_read_to_io(&miter, 337 slot->iobase + CB710_MMC_DATA_PORT, 4); 338 } while (--len); 339 } 340 out: 341 sg_miter_stop(&miter); 342 return err; 343 } 344 345 static u16 cb710_encode_cmd_flags(struct cb710_mmc_reader *reader, 346 struct mmc_command *cmd) 347 { 348 unsigned int flags = cmd->flags; 349 u16 cb_flags = 0; 350 351 /* Windows driver returned 0 for commands for which no response 352 * is expected. It happened that there were only two such commands 353 * used: MMC_GO_IDLE_STATE and MMC_GO_INACTIVE_STATE so it might 354 * as well be a bug in that driver. 355 * 356 * Original driver set bit 14 for MMC/SD application 357 * commands. There's no difference 'on the wire' and 358 * it apparently works without it anyway. 359 */ 360 361 switch (flags & MMC_CMD_MASK) { 362 case MMC_CMD_AC: cb_flags = CB710_MMC_CMD_AC; break; 363 case MMC_CMD_ADTC: cb_flags = CB710_MMC_CMD_ADTC; break; 364 case MMC_CMD_BC: cb_flags = CB710_MMC_CMD_BC; break; 365 case MMC_CMD_BCR: cb_flags = CB710_MMC_CMD_BCR; break; 366 } 367 368 if (flags & MMC_RSP_BUSY) 369 cb_flags |= CB710_MMC_RSP_BUSY; 370 371 cb_flags |= cmd->opcode << CB710_MMC_CMD_CODE_SHIFT; 372 373 if (cmd->data && (cmd->data->flags & MMC_DATA_READ)) 374 cb_flags |= CB710_MMC_DATA_READ; 375 376 if (flags & MMC_RSP_PRESENT) { 377 /* Windows driver set 01 at bits 4,3 except for 378 * MMC_SET_BLOCKLEN where it set 10. Maybe the 379 * hardware can do something special about this 380 * command? The original driver looks buggy/incomplete 381 * anyway so we ignore this for now. 382 * 383 * I assume that 00 here means no response is expected. 384 */ 385 cb_flags |= CB710_MMC_RSP_PRESENT; 386 387 if (flags & MMC_RSP_136) 388 cb_flags |= CB710_MMC_RSP_136; 389 if (!(flags & MMC_RSP_CRC)) 390 cb_flags |= CB710_MMC_RSP_NO_CRC; 391 } 392 393 return cb_flags; 394 } 395 396 static void cb710_receive_response(struct cb710_slot *slot, 397 struct mmc_command *cmd) 398 { 399 unsigned rsp_opcode, wanted_opcode; 400 401 /* Looks like final byte with CRC is always stripped (same as SDHCI) */ 402 if (cmd->flags & MMC_RSP_136) { 403 u32 resp[4]; 404 405 resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE3_PORT); 406 resp[1] = cb710_read_port_32(slot, CB710_MMC_RESPONSE2_PORT); 407 resp[2] = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT); 408 resp[3] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT); 409 rsp_opcode = resp[0] >> 24; 410 411 cmd->resp[0] = (resp[0] << 8)|(resp[1] >> 24); 412 cmd->resp[1] = (resp[1] << 8)|(resp[2] >> 24); 413 cmd->resp[2] = (resp[2] << 8)|(resp[3] >> 24); 414 cmd->resp[3] = (resp[3] << 8); 415 } else { 416 rsp_opcode = cb710_read_port_32(slot, CB710_MMC_RESPONSE1_PORT) & 0x3F; 417 cmd->resp[0] = cb710_read_port_32(slot, CB710_MMC_RESPONSE0_PORT); 418 } 419 420 wanted_opcode = (cmd->flags & MMC_RSP_OPCODE) ? cmd->opcode : 0x3F; 421 if (rsp_opcode != wanted_opcode) 422 cmd->error = -EILSEQ; 423 } 424 425 static int cb710_mmc_transfer_data(struct cb710_slot *slot, 426 struct mmc_data *data) 427 { 428 int error, to; 429 430 if (data->flags & MMC_DATA_READ) 431 error = cb710_mmc_receive(slot, data); 432 else 433 error = cb710_mmc_send(slot, data); 434 435 to = cb710_wait_for_event(slot, CB710_MMC_S1_DATA_TRANSFER_DONE); 436 if (!error) 437 error = to; 438 439 if (!error) 440 data->bytes_xfered = data->blksz * data->blocks; 441 return error; 442 } 443 444 static int cb710_mmc_command(struct mmc_host *mmc, struct mmc_command *cmd) 445 { 446 struct cb710_slot *slot = cb710_mmc_to_slot(mmc); 447 struct cb710_mmc_reader *reader = mmc_priv(mmc); 448 struct mmc_data *data = cmd->data; 449 450 u16 cb_cmd = cb710_encode_cmd_flags(reader, cmd); 451 dev_dbg(cb710_slot_dev(slot), "cmd request: 0x%04X\n", cb_cmd); 452 453 if (data) { 454 if (!cb710_is_transfer_size_supported(data)) { 455 data->error = -EINVAL; 456 return -1; 457 } 458 cb710_mmc_set_transfer_size(slot, data->blocks, data->blksz); 459 } 460 461 cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20|CB710_MMC_S2_BUSY_10); 462 cb710_write_port_16(slot, CB710_MMC_CMD_TYPE_PORT, cb_cmd); 463 cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); 464 cb710_write_port_32(slot, CB710_MMC_CMD_PARAM_PORT, cmd->arg); 465 cb710_mmc_reset_events(slot); 466 cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); 467 cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x01, 0); 468 469 cmd->error = cb710_wait_for_event(slot, CB710_MMC_S1_COMMAND_SENT); 470 if (cmd->error) 471 return -1; 472 473 if (cmd->flags & MMC_RSP_PRESENT) { 474 cb710_receive_response(slot, cmd); 475 if (cmd->error) 476 return -1; 477 } 478 479 if (data) 480 data->error = cb710_mmc_transfer_data(slot, data); 481 return 0; 482 } 483 484 static void cb710_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq) 485 { 486 struct cb710_slot *slot = cb710_mmc_to_slot(mmc); 487 struct cb710_mmc_reader *reader = mmc_priv(mmc); 488 489 WARN_ON(reader->mrq != NULL); 490 491 reader->mrq = mrq; 492 cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0); 493 494 if (!cb710_mmc_command(mmc, mrq->cmd) && mrq->stop) 495 cb710_mmc_command(mmc, mrq->stop); 496 497 tasklet_schedule(&reader->finish_req_tasklet); 498 } 499 500 static int cb710_mmc_powerup(struct cb710_slot *slot) 501 { 502 #ifdef CONFIG_CB710_DEBUG 503 struct cb710_chip *chip = cb710_slot_to_chip(slot); 504 #endif 505 int err; 506 507 /* a lot of magic for now */ 508 dev_dbg(cb710_slot_dev(slot), "bus powerup\n"); 509 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); 510 err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); 511 if (unlikely(err)) 512 return err; 513 cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x80, 0); 514 cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x80, 0); 515 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); 516 mdelay(1); 517 dev_dbg(cb710_slot_dev(slot), "after delay 1\n"); 518 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); 519 err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); 520 if (unlikely(err)) 521 return err; 522 cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x09, 0); 523 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); 524 mdelay(1); 525 dev_dbg(cb710_slot_dev(slot), "after delay 2\n"); 526 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); 527 err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); 528 if (unlikely(err)) 529 return err; 530 cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x08); 531 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); 532 mdelay(2); 533 dev_dbg(cb710_slot_dev(slot), "after delay 3\n"); 534 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); 535 cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0); 536 cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0x70, 0); 537 cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT, 0x80, 0); 538 cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0x03, 0); 539 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); 540 err = cb710_wait_while_busy(slot, CB710_MMC_S2_BUSY_20); 541 if (unlikely(err)) 542 return err; 543 /* This port behaves weird: quick byte reads of 0x08,0x09 return 544 * 0xFF,0x00 after writing 0xFFFF to 0x08; it works correctly when 545 * read/written from userspace... What am I missing here? 546 * (it doesn't depend on write-to-read delay) */ 547 cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0xFFFF); 548 cb710_modify_port_8(slot, CB710_MMC_CONFIG0_PORT, 0x06, 0); 549 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); 550 dev_dbg(cb710_slot_dev(slot), "bus powerup finished\n"); 551 552 return cb710_check_event(slot, 0); 553 } 554 555 static void cb710_mmc_powerdown(struct cb710_slot *slot) 556 { 557 cb710_modify_port_8(slot, CB710_MMC_CONFIG1_PORT, 0, 0x81); 558 cb710_modify_port_8(slot, CB710_MMC_CONFIG3_PORT, 0, 0x80); 559 } 560 561 static void cb710_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) 562 { 563 struct cb710_slot *slot = cb710_mmc_to_slot(mmc); 564 struct cb710_mmc_reader *reader = mmc_priv(mmc); 565 int err; 566 567 cb710_mmc_select_clock_divider(mmc, ios->clock); 568 569 if (ios->power_mode != reader->last_power_mode) { 570 switch (ios->power_mode) { 571 case MMC_POWER_ON: 572 err = cb710_mmc_powerup(slot); 573 if (err) { 574 dev_warn(cb710_slot_dev(slot), 575 "powerup failed (%d)- retrying\n", err); 576 cb710_mmc_powerdown(slot); 577 udelay(1); 578 err = cb710_mmc_powerup(slot); 579 if (err) 580 dev_warn(cb710_slot_dev(slot), 581 "powerup retry failed (%d) - expect errors\n", 582 err); 583 } 584 reader->last_power_mode = MMC_POWER_ON; 585 break; 586 case MMC_POWER_OFF: 587 cb710_mmc_powerdown(slot); 588 reader->last_power_mode = MMC_POWER_OFF; 589 break; 590 case MMC_POWER_UP: 591 default: 592 /* ignore */ 593 break; 594 } 595 } 596 597 cb710_mmc_enable_4bit_data(slot, ios->bus_width != MMC_BUS_WIDTH_1); 598 599 cb710_mmc_enable_irq(slot, CB710_MMC_IE_TEST_MASK, 0); 600 } 601 602 static int cb710_mmc_get_ro(struct mmc_host *mmc) 603 { 604 struct cb710_slot *slot = cb710_mmc_to_slot(mmc); 605 606 return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT) 607 & CB710_MMC_S3_WRITE_PROTECTED; 608 } 609 610 static int cb710_mmc_get_cd(struct mmc_host *mmc) 611 { 612 struct cb710_slot *slot = cb710_mmc_to_slot(mmc); 613 614 return cb710_read_port_8(slot, CB710_MMC_STATUS3_PORT) 615 & CB710_MMC_S3_CARD_DETECTED; 616 } 617 618 static int cb710_mmc_irq_handler(struct cb710_slot *slot) 619 { 620 struct mmc_host *mmc = cb710_slot_to_mmc(slot); 621 struct cb710_mmc_reader *reader = mmc_priv(mmc); 622 u32 status, config1, config2, irqen; 623 624 status = cb710_read_port_32(slot, CB710_MMC_STATUS_PORT); 625 irqen = cb710_read_port_32(slot, CB710_MMC_IRQ_ENABLE_PORT); 626 config2 = cb710_read_port_32(slot, CB710_MMC_CONFIGB_PORT); 627 config1 = cb710_read_port_32(slot, CB710_MMC_CONFIG_PORT); 628 629 dev_dbg(cb710_slot_dev(slot), "interrupt; status: %08X, " 630 "ie: %08X, c2: %08X, c1: %08X\n", 631 status, irqen, config2, config1); 632 633 if (status & (CB710_MMC_S1_CARD_CHANGED << 8)) { 634 /* ack the event */ 635 cb710_write_port_8(slot, CB710_MMC_STATUS1_PORT, 636 CB710_MMC_S1_CARD_CHANGED); 637 if ((irqen & CB710_MMC_IE_CISTATUS_MASK) 638 == CB710_MMC_IE_CISTATUS_MASK) 639 mmc_detect_change(mmc, HZ/5); 640 } else { 641 dev_dbg(cb710_slot_dev(slot), "unknown interrupt (test)\n"); 642 spin_lock(&reader->irq_lock); 643 __cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_TEST_MASK); 644 spin_unlock(&reader->irq_lock); 645 } 646 647 return 1; 648 } 649 650 static void cb710_mmc_finish_request_tasklet(unsigned long data) 651 { 652 struct mmc_host *mmc = (void *)data; 653 struct cb710_mmc_reader *reader = mmc_priv(mmc); 654 struct mmc_request *mrq = reader->mrq; 655 656 reader->mrq = NULL; 657 mmc_request_done(mmc, mrq); 658 } 659 660 static const struct mmc_host_ops cb710_mmc_host = { 661 .request = cb710_mmc_request, 662 .set_ios = cb710_mmc_set_ios, 663 .get_ro = cb710_mmc_get_ro, 664 .get_cd = cb710_mmc_get_cd, 665 }; 666 667 #ifdef CONFIG_PM 668 669 static int cb710_mmc_suspend(struct platform_device *pdev, pm_message_t state) 670 { 671 struct cb710_slot *slot = cb710_pdev_to_slot(pdev); 672 673 cb710_mmc_enable_irq(slot, 0, ~0); 674 return 0; 675 } 676 677 static int cb710_mmc_resume(struct platform_device *pdev) 678 { 679 struct cb710_slot *slot = cb710_pdev_to_slot(pdev); 680 681 cb710_mmc_enable_irq(slot, 0, ~0); 682 return 0; 683 } 684 685 #endif /* CONFIG_PM */ 686 687 static int cb710_mmc_init(struct platform_device *pdev) 688 { 689 struct cb710_slot *slot = cb710_pdev_to_slot(pdev); 690 struct cb710_chip *chip = cb710_slot_to_chip(slot); 691 struct mmc_host *mmc; 692 struct cb710_mmc_reader *reader; 693 int err; 694 u32 val; 695 696 mmc = mmc_alloc_host(sizeof(*reader), cb710_slot_dev(slot)); 697 if (!mmc) 698 return -ENOMEM; 699 700 platform_set_drvdata(pdev, mmc); 701 702 /* harmless (maybe) magic */ 703 pci_read_config_dword(chip->pdev, 0x48, &val); 704 val = cb710_src_freq_mhz[(val >> 16) & 0xF]; 705 dev_dbg(cb710_slot_dev(slot), "source frequency: %dMHz\n", val); 706 val *= 1000000; 707 708 mmc->ops = &cb710_mmc_host; 709 mmc->f_max = val; 710 mmc->f_min = val >> cb710_clock_divider_log2[CB710_MAX_DIVIDER_IDX]; 711 mmc->ocr_avail = MMC_VDD_32_33|MMC_VDD_33_34; 712 mmc->caps = MMC_CAP_4_BIT_DATA; 713 714 reader = mmc_priv(mmc); 715 716 tasklet_init(&reader->finish_req_tasklet, 717 cb710_mmc_finish_request_tasklet, (unsigned long)mmc); 718 spin_lock_init(&reader->irq_lock); 719 cb710_dump_regs(chip, CB710_DUMP_REGS_MMC); 720 721 cb710_mmc_enable_irq(slot, 0, ~0); 722 cb710_set_irq_handler(slot, cb710_mmc_irq_handler); 723 724 err = mmc_add_host(mmc); 725 if (unlikely(err)) 726 goto err_free_mmc; 727 728 dev_dbg(cb710_slot_dev(slot), "mmc_hostname is %s\n", 729 mmc_hostname(mmc)); 730 731 cb710_mmc_enable_irq(slot, CB710_MMC_IE_CARD_INSERTION_STATUS, 0); 732 733 return 0; 734 735 err_free_mmc: 736 dev_dbg(cb710_slot_dev(slot), "mmc_add_host() failed: %d\n", err); 737 738 cb710_set_irq_handler(slot, NULL); 739 mmc_free_host(mmc); 740 return err; 741 } 742 743 static int cb710_mmc_exit(struct platform_device *pdev) 744 { 745 struct cb710_slot *slot = cb710_pdev_to_slot(pdev); 746 struct mmc_host *mmc = cb710_slot_to_mmc(slot); 747 struct cb710_mmc_reader *reader = mmc_priv(mmc); 748 749 cb710_mmc_enable_irq(slot, 0, CB710_MMC_IE_CARD_INSERTION_STATUS); 750 751 mmc_remove_host(mmc); 752 753 /* IRQs should be disabled now, but let's stay on the safe side */ 754 cb710_mmc_enable_irq(slot, 0, ~0); 755 cb710_set_irq_handler(slot, NULL); 756 757 /* clear config ports - just in case */ 758 cb710_write_port_32(slot, CB710_MMC_CONFIG_PORT, 0); 759 cb710_write_port_16(slot, CB710_MMC_CONFIGB_PORT, 0); 760 761 tasklet_kill(&reader->finish_req_tasklet); 762 763 mmc_free_host(mmc); 764 return 0; 765 } 766 767 static struct platform_driver cb710_mmc_driver = { 768 .driver.name = "cb710-mmc", 769 .probe = cb710_mmc_init, 770 .remove = cb710_mmc_exit, 771 #ifdef CONFIG_PM 772 .suspend = cb710_mmc_suspend, 773 .resume = cb710_mmc_resume, 774 #endif 775 }; 776 777 module_platform_driver(cb710_mmc_driver); 778 779 MODULE_AUTHOR("Michał Mirosław <mirq-linux@rere.qmqm.pl>"); 780 MODULE_DESCRIPTION("ENE CB710 memory card reader driver - MMC/SD part"); 781 MODULE_LICENSE("GPL"); 782 MODULE_ALIAS("platform:cb710-mmc"); 783