1 /* 2 * Atmel MultiMedia Card Interface driver 3 * 4 * Copyright (C) 2004-2008 Atmel Corporation 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 as 8 * published by the Free Software Foundation. 9 */ 10 #include <linux/blkdev.h> 11 #include <linux/clk.h> 12 #include <linux/debugfs.h> 13 #include <linux/device.h> 14 #include <linux/dmaengine.h> 15 #include <linux/dma-mapping.h> 16 #include <linux/err.h> 17 #include <linux/gpio.h> 18 #include <linux/init.h> 19 #include <linux/interrupt.h> 20 #include <linux/ioport.h> 21 #include <linux/module.h> 22 #include <linux/platform_device.h> 23 #include <linux/scatterlist.h> 24 #include <linux/seq_file.h> 25 #include <linux/slab.h> 26 #include <linux/stat.h> 27 28 #include <linux/mmc/host.h> 29 #include <linux/mmc/sdio.h> 30 31 #include <mach/atmel-mci.h> 32 #include <linux/atmel-mci.h> 33 #include <linux/atmel_pdc.h> 34 35 #include <asm/io.h> 36 #include <asm/unaligned.h> 37 38 #include <mach/cpu.h> 39 #include <mach/board.h> 40 41 #include "atmel-mci-regs.h" 42 43 #define ATMCI_DATA_ERROR_FLAGS (ATMCI_DCRCE | ATMCI_DTOE | ATMCI_OVRE | ATMCI_UNRE) 44 #define ATMCI_DMA_THRESHOLD 16 45 46 enum { 47 EVENT_CMD_COMPLETE = 0, 48 EVENT_XFER_COMPLETE, 49 EVENT_DATA_COMPLETE, 50 EVENT_DATA_ERROR, 51 }; 52 53 enum atmel_mci_state { 54 STATE_IDLE = 0, 55 STATE_SENDING_CMD, 56 STATE_SENDING_DATA, 57 STATE_DATA_BUSY, 58 STATE_SENDING_STOP, 59 STATE_DATA_ERROR, 60 }; 61 62 enum atmci_xfer_dir { 63 XFER_RECEIVE = 0, 64 XFER_TRANSMIT, 65 }; 66 67 enum atmci_pdc_buf { 68 PDC_FIRST_BUF = 0, 69 PDC_SECOND_BUF, 70 }; 71 72 struct atmel_mci_caps { 73 bool has_dma; 74 bool has_pdc; 75 bool has_cfg_reg; 76 bool has_cstor_reg; 77 bool has_highspeed; 78 bool has_rwproof; 79 }; 80 81 struct atmel_mci_dma { 82 struct dma_chan *chan; 83 struct dma_async_tx_descriptor *data_desc; 84 }; 85 86 /** 87 * struct atmel_mci - MMC controller state shared between all slots 88 * @lock: Spinlock protecting the queue and associated data. 89 * @regs: Pointer to MMIO registers. 90 * @sg: Scatterlist entry currently being processed by PIO or PDC code. 91 * @pio_offset: Offset into the current scatterlist entry. 92 * @cur_slot: The slot which is currently using the controller. 93 * @mrq: The request currently being processed on @cur_slot, 94 * or NULL if the controller is idle. 95 * @cmd: The command currently being sent to the card, or NULL. 96 * @data: The data currently being transferred, or NULL if no data 97 * transfer is in progress. 98 * @data_size: just data->blocks * data->blksz. 99 * @dma: DMA client state. 100 * @data_chan: DMA channel being used for the current data transfer. 101 * @cmd_status: Snapshot of SR taken upon completion of the current 102 * command. Only valid when EVENT_CMD_COMPLETE is pending. 103 * @data_status: Snapshot of SR taken upon completion of the current 104 * data transfer. Only valid when EVENT_DATA_COMPLETE or 105 * EVENT_DATA_ERROR is pending. 106 * @stop_cmdr: Value to be loaded into CMDR when the stop command is 107 * to be sent. 108 * @tasklet: Tasklet running the request state machine. 109 * @pending_events: Bitmask of events flagged by the interrupt handler 110 * to be processed by the tasklet. 111 * @completed_events: Bitmask of events which the state machine has 112 * processed. 113 * @state: Tasklet state. 114 * @queue: List of slots waiting for access to the controller. 115 * @need_clock_update: Update the clock rate before the next request. 116 * @need_reset: Reset controller before next request. 117 * @mode_reg: Value of the MR register. 118 * @cfg_reg: Value of the CFG register. 119 * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus 120 * rate and timeout calculations. 121 * @mapbase: Physical address of the MMIO registers. 122 * @mck: The peripheral bus clock hooked up to the MMC controller. 123 * @pdev: Platform device associated with the MMC controller. 124 * @slot: Slots sharing this MMC controller. 125 * @caps: MCI capabilities depending on MCI version. 126 * @prepare_data: function to setup MCI before data transfer which 127 * depends on MCI capabilities. 128 * @submit_data: function to start data transfer which depends on MCI 129 * capabilities. 130 * @stop_transfer: function to stop data transfer which depends on MCI 131 * capabilities. 132 * 133 * Locking 134 * ======= 135 * 136 * @lock is a softirq-safe spinlock protecting @queue as well as 137 * @cur_slot, @mrq and @state. These must always be updated 138 * at the same time while holding @lock. 139 * 140 * @lock also protects mode_reg and need_clock_update since these are 141 * used to synchronize mode register updates with the queue 142 * processing. 143 * 144 * The @mrq field of struct atmel_mci_slot is also protected by @lock, 145 * and must always be written at the same time as the slot is added to 146 * @queue. 147 * 148 * @pending_events and @completed_events are accessed using atomic bit 149 * operations, so they don't need any locking. 150 * 151 * None of the fields touched by the interrupt handler need any 152 * locking. However, ordering is important: Before EVENT_DATA_ERROR or 153 * EVENT_DATA_COMPLETE is set in @pending_events, all data-related 154 * interrupts must be disabled and @data_status updated with a 155 * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the 156 * CMDRDY interrupt must be disabled and @cmd_status updated with a 157 * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the 158 * bytes_xfered field of @data must be written. This is ensured by 159 * using barriers. 160 */ 161 struct atmel_mci { 162 spinlock_t lock; 163 void __iomem *regs; 164 165 struct scatterlist *sg; 166 unsigned int pio_offset; 167 168 struct atmel_mci_slot *cur_slot; 169 struct mmc_request *mrq; 170 struct mmc_command *cmd; 171 struct mmc_data *data; 172 unsigned int data_size; 173 174 struct atmel_mci_dma dma; 175 struct dma_chan *data_chan; 176 177 u32 cmd_status; 178 u32 data_status; 179 u32 stop_cmdr; 180 181 struct tasklet_struct tasklet; 182 unsigned long pending_events; 183 unsigned long completed_events; 184 enum atmel_mci_state state; 185 struct list_head queue; 186 187 bool need_clock_update; 188 bool need_reset; 189 u32 mode_reg; 190 u32 cfg_reg; 191 unsigned long bus_hz; 192 unsigned long mapbase; 193 struct clk *mck; 194 struct platform_device *pdev; 195 196 struct atmel_mci_slot *slot[ATMCI_MAX_NR_SLOTS]; 197 198 struct atmel_mci_caps caps; 199 200 u32 (*prepare_data)(struct atmel_mci *host, struct mmc_data *data); 201 void (*submit_data)(struct atmel_mci *host, struct mmc_data *data); 202 void (*stop_transfer)(struct atmel_mci *host); 203 }; 204 205 /** 206 * struct atmel_mci_slot - MMC slot state 207 * @mmc: The mmc_host representing this slot. 208 * @host: The MMC controller this slot is using. 209 * @sdc_reg: Value of SDCR to be written before using this slot. 210 * @sdio_irq: SDIO irq mask for this slot. 211 * @mrq: mmc_request currently being processed or waiting to be 212 * processed, or NULL when the slot is idle. 213 * @queue_node: List node for placing this node in the @queue list of 214 * &struct atmel_mci. 215 * @clock: Clock rate configured by set_ios(). Protected by host->lock. 216 * @flags: Random state bits associated with the slot. 217 * @detect_pin: GPIO pin used for card detection, or negative if not 218 * available. 219 * @wp_pin: GPIO pin used for card write protect sending, or negative 220 * if not available. 221 * @detect_is_active_high: The state of the detect pin when it is active. 222 * @detect_timer: Timer used for debouncing @detect_pin interrupts. 223 */ 224 struct atmel_mci_slot { 225 struct mmc_host *mmc; 226 struct atmel_mci *host; 227 228 u32 sdc_reg; 229 u32 sdio_irq; 230 231 struct mmc_request *mrq; 232 struct list_head queue_node; 233 234 unsigned int clock; 235 unsigned long flags; 236 #define ATMCI_CARD_PRESENT 0 237 #define ATMCI_CARD_NEED_INIT 1 238 #define ATMCI_SHUTDOWN 2 239 #define ATMCI_SUSPENDED 3 240 241 int detect_pin; 242 int wp_pin; 243 bool detect_is_active_high; 244 245 struct timer_list detect_timer; 246 }; 247 248 #define atmci_test_and_clear_pending(host, event) \ 249 test_and_clear_bit(event, &host->pending_events) 250 #define atmci_set_completed(host, event) \ 251 set_bit(event, &host->completed_events) 252 #define atmci_set_pending(host, event) \ 253 set_bit(event, &host->pending_events) 254 255 /* 256 * The debugfs stuff below is mostly optimized away when 257 * CONFIG_DEBUG_FS is not set. 258 */ 259 static int atmci_req_show(struct seq_file *s, void *v) 260 { 261 struct atmel_mci_slot *slot = s->private; 262 struct mmc_request *mrq; 263 struct mmc_command *cmd; 264 struct mmc_command *stop; 265 struct mmc_data *data; 266 267 /* Make sure we get a consistent snapshot */ 268 spin_lock_bh(&slot->host->lock); 269 mrq = slot->mrq; 270 271 if (mrq) { 272 cmd = mrq->cmd; 273 data = mrq->data; 274 stop = mrq->stop; 275 276 if (cmd) 277 seq_printf(s, 278 "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n", 279 cmd->opcode, cmd->arg, cmd->flags, 280 cmd->resp[0], cmd->resp[1], cmd->resp[2], 281 cmd->resp[3], cmd->error); 282 if (data) 283 seq_printf(s, "DATA %u / %u * %u flg %x err %d\n", 284 data->bytes_xfered, data->blocks, 285 data->blksz, data->flags, data->error); 286 if (stop) 287 seq_printf(s, 288 "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n", 289 stop->opcode, stop->arg, stop->flags, 290 stop->resp[0], stop->resp[1], stop->resp[2], 291 stop->resp[3], stop->error); 292 } 293 294 spin_unlock_bh(&slot->host->lock); 295 296 return 0; 297 } 298 299 static int atmci_req_open(struct inode *inode, struct file *file) 300 { 301 return single_open(file, atmci_req_show, inode->i_private); 302 } 303 304 static const struct file_operations atmci_req_fops = { 305 .owner = THIS_MODULE, 306 .open = atmci_req_open, 307 .read = seq_read, 308 .llseek = seq_lseek, 309 .release = single_release, 310 }; 311 312 static void atmci_show_status_reg(struct seq_file *s, 313 const char *regname, u32 value) 314 { 315 static const char *sr_bit[] = { 316 [0] = "CMDRDY", 317 [1] = "RXRDY", 318 [2] = "TXRDY", 319 [3] = "BLKE", 320 [4] = "DTIP", 321 [5] = "NOTBUSY", 322 [6] = "ENDRX", 323 [7] = "ENDTX", 324 [8] = "SDIOIRQA", 325 [9] = "SDIOIRQB", 326 [12] = "SDIOWAIT", 327 [14] = "RXBUFF", 328 [15] = "TXBUFE", 329 [16] = "RINDE", 330 [17] = "RDIRE", 331 [18] = "RCRCE", 332 [19] = "RENDE", 333 [20] = "RTOE", 334 [21] = "DCRCE", 335 [22] = "DTOE", 336 [23] = "CSTOE", 337 [24] = "BLKOVRE", 338 [25] = "DMADONE", 339 [26] = "FIFOEMPTY", 340 [27] = "XFRDONE", 341 [30] = "OVRE", 342 [31] = "UNRE", 343 }; 344 unsigned int i; 345 346 seq_printf(s, "%s:\t0x%08x", regname, value); 347 for (i = 0; i < ARRAY_SIZE(sr_bit); i++) { 348 if (value & (1 << i)) { 349 if (sr_bit[i]) 350 seq_printf(s, " %s", sr_bit[i]); 351 else 352 seq_puts(s, " UNKNOWN"); 353 } 354 } 355 seq_putc(s, '\n'); 356 } 357 358 static int atmci_regs_show(struct seq_file *s, void *v) 359 { 360 struct atmel_mci *host = s->private; 361 u32 *buf; 362 363 buf = kmalloc(ATMCI_REGS_SIZE, GFP_KERNEL); 364 if (!buf) 365 return -ENOMEM; 366 367 /* 368 * Grab a more or less consistent snapshot. Note that we're 369 * not disabling interrupts, so IMR and SR may not be 370 * consistent. 371 */ 372 spin_lock_bh(&host->lock); 373 clk_enable(host->mck); 374 memcpy_fromio(buf, host->regs, ATMCI_REGS_SIZE); 375 clk_disable(host->mck); 376 spin_unlock_bh(&host->lock); 377 378 seq_printf(s, "MR:\t0x%08x%s%s CLKDIV=%u\n", 379 buf[ATMCI_MR / 4], 380 buf[ATMCI_MR / 4] & ATMCI_MR_RDPROOF ? " RDPROOF" : "", 381 buf[ATMCI_MR / 4] & ATMCI_MR_WRPROOF ? " WRPROOF" : "", 382 buf[ATMCI_MR / 4] & 0xff); 383 seq_printf(s, "DTOR:\t0x%08x\n", buf[ATMCI_DTOR / 4]); 384 seq_printf(s, "SDCR:\t0x%08x\n", buf[ATMCI_SDCR / 4]); 385 seq_printf(s, "ARGR:\t0x%08x\n", buf[ATMCI_ARGR / 4]); 386 seq_printf(s, "BLKR:\t0x%08x BCNT=%u BLKLEN=%u\n", 387 buf[ATMCI_BLKR / 4], 388 buf[ATMCI_BLKR / 4] & 0xffff, 389 (buf[ATMCI_BLKR / 4] >> 16) & 0xffff); 390 if (host->caps.has_cstor_reg) 391 seq_printf(s, "CSTOR:\t0x%08x\n", buf[ATMCI_CSTOR / 4]); 392 393 /* Don't read RSPR and RDR; it will consume the data there */ 394 395 atmci_show_status_reg(s, "SR", buf[ATMCI_SR / 4]); 396 atmci_show_status_reg(s, "IMR", buf[ATMCI_IMR / 4]); 397 398 if (host->caps.has_dma) { 399 u32 val; 400 401 val = buf[ATMCI_DMA / 4]; 402 seq_printf(s, "DMA:\t0x%08x OFFSET=%u CHKSIZE=%u%s\n", 403 val, val & 3, 404 ((val >> 4) & 3) ? 405 1 << (((val >> 4) & 3) + 1) : 1, 406 val & ATMCI_DMAEN ? " DMAEN" : ""); 407 } 408 if (host->caps.has_cfg_reg) { 409 u32 val; 410 411 val = buf[ATMCI_CFG / 4]; 412 seq_printf(s, "CFG:\t0x%08x%s%s%s%s\n", 413 val, 414 val & ATMCI_CFG_FIFOMODE_1DATA ? " FIFOMODE_ONE_DATA" : "", 415 val & ATMCI_CFG_FERRCTRL_COR ? " FERRCTRL_CLEAR_ON_READ" : "", 416 val & ATMCI_CFG_HSMODE ? " HSMODE" : "", 417 val & ATMCI_CFG_LSYNC ? " LSYNC" : ""); 418 } 419 420 kfree(buf); 421 422 return 0; 423 } 424 425 static int atmci_regs_open(struct inode *inode, struct file *file) 426 { 427 return single_open(file, atmci_regs_show, inode->i_private); 428 } 429 430 static const struct file_operations atmci_regs_fops = { 431 .owner = THIS_MODULE, 432 .open = atmci_regs_open, 433 .read = seq_read, 434 .llseek = seq_lseek, 435 .release = single_release, 436 }; 437 438 static void atmci_init_debugfs(struct atmel_mci_slot *slot) 439 { 440 struct mmc_host *mmc = slot->mmc; 441 struct atmel_mci *host = slot->host; 442 struct dentry *root; 443 struct dentry *node; 444 445 root = mmc->debugfs_root; 446 if (!root) 447 return; 448 449 node = debugfs_create_file("regs", S_IRUSR, root, host, 450 &atmci_regs_fops); 451 if (IS_ERR(node)) 452 return; 453 if (!node) 454 goto err; 455 456 node = debugfs_create_file("req", S_IRUSR, root, slot, &atmci_req_fops); 457 if (!node) 458 goto err; 459 460 node = debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state); 461 if (!node) 462 goto err; 463 464 node = debugfs_create_x32("pending_events", S_IRUSR, root, 465 (u32 *)&host->pending_events); 466 if (!node) 467 goto err; 468 469 node = debugfs_create_x32("completed_events", S_IRUSR, root, 470 (u32 *)&host->completed_events); 471 if (!node) 472 goto err; 473 474 return; 475 476 err: 477 dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n"); 478 } 479 480 static inline unsigned int atmci_ns_to_clocks(struct atmel_mci *host, 481 unsigned int ns) 482 { 483 return (ns * (host->bus_hz / 1000000) + 999) / 1000; 484 } 485 486 static void atmci_set_timeout(struct atmel_mci *host, 487 struct atmel_mci_slot *slot, struct mmc_data *data) 488 { 489 static unsigned dtomul_to_shift[] = { 490 0, 4, 7, 8, 10, 12, 16, 20 491 }; 492 unsigned timeout; 493 unsigned dtocyc; 494 unsigned dtomul; 495 496 timeout = atmci_ns_to_clocks(host, data->timeout_ns) 497 + data->timeout_clks; 498 499 for (dtomul = 0; dtomul < 8; dtomul++) { 500 unsigned shift = dtomul_to_shift[dtomul]; 501 dtocyc = (timeout + (1 << shift) - 1) >> shift; 502 if (dtocyc < 15) 503 break; 504 } 505 506 if (dtomul >= 8) { 507 dtomul = 7; 508 dtocyc = 15; 509 } 510 511 dev_vdbg(&slot->mmc->class_dev, "setting timeout to %u cycles\n", 512 dtocyc << dtomul_to_shift[dtomul]); 513 atmci_writel(host, ATMCI_DTOR, (ATMCI_DTOMUL(dtomul) | ATMCI_DTOCYC(dtocyc))); 514 } 515 516 /* 517 * Return mask with command flags to be enabled for this command. 518 */ 519 static u32 atmci_prepare_command(struct mmc_host *mmc, 520 struct mmc_command *cmd) 521 { 522 struct mmc_data *data; 523 u32 cmdr; 524 525 cmd->error = -EINPROGRESS; 526 527 cmdr = ATMCI_CMDR_CMDNB(cmd->opcode); 528 529 if (cmd->flags & MMC_RSP_PRESENT) { 530 if (cmd->flags & MMC_RSP_136) 531 cmdr |= ATMCI_CMDR_RSPTYP_136BIT; 532 else 533 cmdr |= ATMCI_CMDR_RSPTYP_48BIT; 534 } 535 536 /* 537 * This should really be MAXLAT_5 for CMD2 and ACMD41, but 538 * it's too difficult to determine whether this is an ACMD or 539 * not. Better make it 64. 540 */ 541 cmdr |= ATMCI_CMDR_MAXLAT_64CYC; 542 543 if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN) 544 cmdr |= ATMCI_CMDR_OPDCMD; 545 546 data = cmd->data; 547 if (data) { 548 cmdr |= ATMCI_CMDR_START_XFER; 549 550 if (cmd->opcode == SD_IO_RW_EXTENDED) { 551 cmdr |= ATMCI_CMDR_SDIO_BLOCK; 552 } else { 553 if (data->flags & MMC_DATA_STREAM) 554 cmdr |= ATMCI_CMDR_STREAM; 555 else if (data->blocks > 1) 556 cmdr |= ATMCI_CMDR_MULTI_BLOCK; 557 else 558 cmdr |= ATMCI_CMDR_BLOCK; 559 } 560 561 if (data->flags & MMC_DATA_READ) 562 cmdr |= ATMCI_CMDR_TRDIR_READ; 563 } 564 565 return cmdr; 566 } 567 568 static void atmci_send_command(struct atmel_mci *host, 569 struct mmc_command *cmd, u32 cmd_flags) 570 { 571 WARN_ON(host->cmd); 572 host->cmd = cmd; 573 574 dev_vdbg(&host->pdev->dev, 575 "start command: ARGR=0x%08x CMDR=0x%08x\n", 576 cmd->arg, cmd_flags); 577 578 atmci_writel(host, ATMCI_ARGR, cmd->arg); 579 atmci_writel(host, ATMCI_CMDR, cmd_flags); 580 } 581 582 static void atmci_send_stop_cmd(struct atmel_mci *host, struct mmc_data *data) 583 { 584 atmci_send_command(host, data->stop, host->stop_cmdr); 585 atmci_writel(host, ATMCI_IER, ATMCI_CMDRDY); 586 } 587 588 /* 589 * Configure given PDC buffer taking care of alignement issues. 590 * Update host->data_size and host->sg. 591 */ 592 static void atmci_pdc_set_single_buf(struct atmel_mci *host, 593 enum atmci_xfer_dir dir, enum atmci_pdc_buf buf_nb) 594 { 595 u32 pointer_reg, counter_reg; 596 597 if (dir == XFER_RECEIVE) { 598 pointer_reg = ATMEL_PDC_RPR; 599 counter_reg = ATMEL_PDC_RCR; 600 } else { 601 pointer_reg = ATMEL_PDC_TPR; 602 counter_reg = ATMEL_PDC_TCR; 603 } 604 605 if (buf_nb == PDC_SECOND_BUF) { 606 pointer_reg += ATMEL_PDC_SCND_BUF_OFF; 607 counter_reg += ATMEL_PDC_SCND_BUF_OFF; 608 } 609 610 atmci_writel(host, pointer_reg, sg_dma_address(host->sg)); 611 if (host->data_size <= sg_dma_len(host->sg)) { 612 if (host->data_size & 0x3) { 613 /* If size is different from modulo 4, transfer bytes */ 614 atmci_writel(host, counter_reg, host->data_size); 615 atmci_writel(host, ATMCI_MR, host->mode_reg | ATMCI_MR_PDCFBYTE); 616 } else { 617 /* Else transfer 32-bits words */ 618 atmci_writel(host, counter_reg, host->data_size / 4); 619 } 620 host->data_size = 0; 621 } else { 622 /* We assume the size of a page is 32-bits aligned */ 623 atmci_writel(host, counter_reg, sg_dma_len(host->sg) / 4); 624 host->data_size -= sg_dma_len(host->sg); 625 if (host->data_size) 626 host->sg = sg_next(host->sg); 627 } 628 } 629 630 /* 631 * Configure PDC buffer according to the data size ie configuring one or two 632 * buffers. Don't use this function if you want to configure only the second 633 * buffer. In this case, use atmci_pdc_set_single_buf. 634 */ 635 static void atmci_pdc_set_both_buf(struct atmel_mci *host, int dir) 636 { 637 atmci_pdc_set_single_buf(host, dir, PDC_FIRST_BUF); 638 if (host->data_size) 639 atmci_pdc_set_single_buf(host, dir, PDC_SECOND_BUF); 640 } 641 642 /* 643 * Unmap sg lists, called when transfer is finished. 644 */ 645 static void atmci_pdc_cleanup(struct atmel_mci *host) 646 { 647 struct mmc_data *data = host->data; 648 649 if (data) 650 dma_unmap_sg(&host->pdev->dev, 651 data->sg, data->sg_len, 652 ((data->flags & MMC_DATA_WRITE) 653 ? DMA_TO_DEVICE : DMA_FROM_DEVICE)); 654 } 655 656 /* 657 * Disable PDC transfers. Update pending flags to EVENT_XFER_COMPLETE after 658 * having received ATMCI_TXBUFE or ATMCI_RXBUFF interrupt. Enable ATMCI_NOTBUSY 659 * interrupt needed for both transfer directions. 660 */ 661 static void atmci_pdc_complete(struct atmel_mci *host) 662 { 663 atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); 664 atmci_pdc_cleanup(host); 665 666 /* 667 * If the card was removed, data will be NULL. No point trying 668 * to send the stop command or waiting for NBUSY in this case. 669 */ 670 if (host->data) { 671 atmci_set_pending(host, EVENT_XFER_COMPLETE); 672 tasklet_schedule(&host->tasklet); 673 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); 674 } 675 } 676 677 static void atmci_dma_cleanup(struct atmel_mci *host) 678 { 679 struct mmc_data *data = host->data; 680 681 if (data) 682 dma_unmap_sg(host->dma.chan->device->dev, 683 data->sg, data->sg_len, 684 ((data->flags & MMC_DATA_WRITE) 685 ? DMA_TO_DEVICE : DMA_FROM_DEVICE)); 686 } 687 688 /* 689 * This function is called by the DMA driver from tasklet context. 690 */ 691 static void atmci_dma_complete(void *arg) 692 { 693 struct atmel_mci *host = arg; 694 struct mmc_data *data = host->data; 695 696 dev_vdbg(&host->pdev->dev, "DMA complete\n"); 697 698 if (host->caps.has_dma) 699 /* Disable DMA hardware handshaking on MCI */ 700 atmci_writel(host, ATMCI_DMA, atmci_readl(host, ATMCI_DMA) & ~ATMCI_DMAEN); 701 702 atmci_dma_cleanup(host); 703 704 /* 705 * If the card was removed, data will be NULL. No point trying 706 * to send the stop command or waiting for NBUSY in this case. 707 */ 708 if (data) { 709 atmci_set_pending(host, EVENT_XFER_COMPLETE); 710 tasklet_schedule(&host->tasklet); 711 712 /* 713 * Regardless of what the documentation says, we have 714 * to wait for NOTBUSY even after block read 715 * operations. 716 * 717 * When the DMA transfer is complete, the controller 718 * may still be reading the CRC from the card, i.e. 719 * the data transfer is still in progress and we 720 * haven't seen all the potential error bits yet. 721 * 722 * The interrupt handler will schedule a different 723 * tasklet to finish things up when the data transfer 724 * is completely done. 725 * 726 * We may not complete the mmc request here anyway 727 * because the mmc layer may call back and cause us to 728 * violate the "don't submit new operations from the 729 * completion callback" rule of the dma engine 730 * framework. 731 */ 732 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); 733 } 734 } 735 736 /* 737 * Returns a mask of interrupt flags to be enabled after the whole 738 * request has been prepared. 739 */ 740 static u32 atmci_prepare_data(struct atmel_mci *host, struct mmc_data *data) 741 { 742 u32 iflags; 743 744 data->error = -EINPROGRESS; 745 746 host->sg = data->sg; 747 host->data = data; 748 host->data_chan = NULL; 749 750 iflags = ATMCI_DATA_ERROR_FLAGS; 751 752 /* 753 * Errata: MMC data write operation with less than 12 754 * bytes is impossible. 755 * 756 * Errata: MCI Transmit Data Register (TDR) FIFO 757 * corruption when length is not multiple of 4. 758 */ 759 if (data->blocks * data->blksz < 12 760 || (data->blocks * data->blksz) & 3) 761 host->need_reset = true; 762 763 host->pio_offset = 0; 764 if (data->flags & MMC_DATA_READ) 765 iflags |= ATMCI_RXRDY; 766 else 767 iflags |= ATMCI_TXRDY; 768 769 return iflags; 770 } 771 772 /* 773 * Set interrupt flags and set block length into the MCI mode register even 774 * if this value is also accessible in the MCI block register. It seems to be 775 * necessary before the High Speed MCI version. It also map sg and configure 776 * PDC registers. 777 */ 778 static u32 779 atmci_prepare_data_pdc(struct atmel_mci *host, struct mmc_data *data) 780 { 781 u32 iflags, tmp; 782 unsigned int sg_len; 783 enum dma_data_direction dir; 784 785 data->error = -EINPROGRESS; 786 787 host->data = data; 788 host->sg = data->sg; 789 iflags = ATMCI_DATA_ERROR_FLAGS; 790 791 /* Enable pdc mode */ 792 atmci_writel(host, ATMCI_MR, host->mode_reg | ATMCI_MR_PDCMODE); 793 794 if (data->flags & MMC_DATA_READ) { 795 dir = DMA_FROM_DEVICE; 796 iflags |= ATMCI_ENDRX | ATMCI_RXBUFF; 797 } else { 798 dir = DMA_TO_DEVICE; 799 iflags |= ATMCI_ENDTX | ATMCI_TXBUFE; 800 } 801 802 /* Set BLKLEN */ 803 tmp = atmci_readl(host, ATMCI_MR); 804 tmp &= 0x0000ffff; 805 tmp |= ATMCI_BLKLEN(data->blksz); 806 atmci_writel(host, ATMCI_MR, tmp); 807 808 /* Configure PDC */ 809 host->data_size = data->blocks * data->blksz; 810 sg_len = dma_map_sg(&host->pdev->dev, data->sg, data->sg_len, dir); 811 if (host->data_size) 812 atmci_pdc_set_both_buf(host, 813 ((dir == DMA_FROM_DEVICE) ? XFER_RECEIVE : XFER_TRANSMIT)); 814 815 return iflags; 816 } 817 818 static u32 819 atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) 820 { 821 struct dma_chan *chan; 822 struct dma_async_tx_descriptor *desc; 823 struct scatterlist *sg; 824 unsigned int i; 825 enum dma_data_direction direction; 826 enum dma_transfer_direction slave_dirn; 827 unsigned int sglen; 828 u32 iflags; 829 830 data->error = -EINPROGRESS; 831 832 WARN_ON(host->data); 833 host->sg = NULL; 834 host->data = data; 835 836 iflags = ATMCI_DATA_ERROR_FLAGS; 837 838 /* 839 * We don't do DMA on "complex" transfers, i.e. with 840 * non-word-aligned buffers or lengths. Also, we don't bother 841 * with all the DMA setup overhead for short transfers. 842 */ 843 if (data->blocks * data->blksz < ATMCI_DMA_THRESHOLD) 844 return atmci_prepare_data(host, data); 845 if (data->blksz & 3) 846 return atmci_prepare_data(host, data); 847 848 for_each_sg(data->sg, sg, data->sg_len, i) { 849 if (sg->offset & 3 || sg->length & 3) 850 return atmci_prepare_data(host, data); 851 } 852 853 /* If we don't have a channel, we can't do DMA */ 854 chan = host->dma.chan; 855 if (chan) 856 host->data_chan = chan; 857 858 if (!chan) 859 return -ENODEV; 860 861 if (host->caps.has_dma) 862 atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(3) | ATMCI_DMAEN); 863 864 if (data->flags & MMC_DATA_READ) { 865 direction = DMA_FROM_DEVICE; 866 slave_dirn = DMA_DEV_TO_MEM; 867 } else { 868 direction = DMA_TO_DEVICE; 869 slave_dirn = DMA_MEM_TO_DEV; 870 } 871 872 sglen = dma_map_sg(chan->device->dev, data->sg, 873 data->sg_len, direction); 874 875 desc = chan->device->device_prep_slave_sg(chan, 876 data->sg, sglen, slave_dirn, 877 DMA_PREP_INTERRUPT | DMA_CTRL_ACK); 878 if (!desc) 879 goto unmap_exit; 880 881 host->dma.data_desc = desc; 882 desc->callback = atmci_dma_complete; 883 desc->callback_param = host; 884 885 return iflags; 886 unmap_exit: 887 dma_unmap_sg(chan->device->dev, data->sg, data->sg_len, direction); 888 return -ENOMEM; 889 } 890 891 static void 892 atmci_submit_data(struct atmel_mci *host, struct mmc_data *data) 893 { 894 return; 895 } 896 897 /* 898 * Start PDC according to transfer direction. 899 */ 900 static void 901 atmci_submit_data_pdc(struct atmel_mci *host, struct mmc_data *data) 902 { 903 if (data->flags & MMC_DATA_READ) 904 atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN); 905 else 906 atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN); 907 } 908 909 static void 910 atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data) 911 { 912 struct dma_chan *chan = host->data_chan; 913 struct dma_async_tx_descriptor *desc = host->dma.data_desc; 914 915 if (chan) { 916 dmaengine_submit(desc); 917 dma_async_issue_pending(chan); 918 } 919 } 920 921 static void atmci_stop_transfer(struct atmel_mci *host) 922 { 923 atmci_set_pending(host, EVENT_XFER_COMPLETE); 924 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); 925 } 926 927 /* 928 * Stop data transfer because error(s) occured. 929 */ 930 static void atmci_stop_transfer_pdc(struct atmel_mci *host) 931 { 932 atmci_set_pending(host, EVENT_XFER_COMPLETE); 933 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); 934 } 935 936 static void atmci_stop_transfer_dma(struct atmel_mci *host) 937 { 938 struct dma_chan *chan = host->data_chan; 939 940 if (chan) { 941 dmaengine_terminate_all(chan); 942 atmci_dma_cleanup(host); 943 } else { 944 /* Data transfer was stopped by the interrupt handler */ 945 atmci_set_pending(host, EVENT_XFER_COMPLETE); 946 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); 947 } 948 } 949 950 /* 951 * Start a request: prepare data if needed, prepare the command and activate 952 * interrupts. 953 */ 954 static void atmci_start_request(struct atmel_mci *host, 955 struct atmel_mci_slot *slot) 956 { 957 struct mmc_request *mrq; 958 struct mmc_command *cmd; 959 struct mmc_data *data; 960 u32 iflags; 961 u32 cmdflags; 962 963 mrq = slot->mrq; 964 host->cur_slot = slot; 965 host->mrq = mrq; 966 967 host->pending_events = 0; 968 host->completed_events = 0; 969 host->data_status = 0; 970 971 if (host->need_reset) { 972 iflags = atmci_readl(host, ATMCI_IMR); 973 iflags &= (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB); 974 atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST); 975 atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN); 976 atmci_writel(host, ATMCI_MR, host->mode_reg); 977 if (host->caps.has_cfg_reg) 978 atmci_writel(host, ATMCI_CFG, host->cfg_reg); 979 atmci_writel(host, ATMCI_IER, iflags); 980 host->need_reset = false; 981 } 982 atmci_writel(host, ATMCI_SDCR, slot->sdc_reg); 983 984 iflags = atmci_readl(host, ATMCI_IMR); 985 if (iflags & ~(ATMCI_SDIOIRQA | ATMCI_SDIOIRQB)) 986 dev_warn(&slot->mmc->class_dev, "WARNING: IMR=0x%08x\n", 987 iflags); 988 989 if (unlikely(test_and_clear_bit(ATMCI_CARD_NEED_INIT, &slot->flags))) { 990 /* Send init sequence (74 clock cycles) */ 991 atmci_writel(host, ATMCI_CMDR, ATMCI_CMDR_SPCMD_INIT); 992 while (!(atmci_readl(host, ATMCI_SR) & ATMCI_CMDRDY)) 993 cpu_relax(); 994 } 995 iflags = 0; 996 data = mrq->data; 997 if (data) { 998 atmci_set_timeout(host, slot, data); 999 1000 /* Must set block count/size before sending command */ 1001 atmci_writel(host, ATMCI_BLKR, ATMCI_BCNT(data->blocks) 1002 | ATMCI_BLKLEN(data->blksz)); 1003 dev_vdbg(&slot->mmc->class_dev, "BLKR=0x%08x\n", 1004 ATMCI_BCNT(data->blocks) | ATMCI_BLKLEN(data->blksz)); 1005 1006 iflags |= host->prepare_data(host, data); 1007 } 1008 1009 iflags |= ATMCI_CMDRDY; 1010 cmd = mrq->cmd; 1011 cmdflags = atmci_prepare_command(slot->mmc, cmd); 1012 atmci_send_command(host, cmd, cmdflags); 1013 1014 if (data) 1015 host->submit_data(host, data); 1016 1017 if (mrq->stop) { 1018 host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop); 1019 host->stop_cmdr |= ATMCI_CMDR_STOP_XFER; 1020 if (!(data->flags & MMC_DATA_WRITE)) 1021 host->stop_cmdr |= ATMCI_CMDR_TRDIR_READ; 1022 if (data->flags & MMC_DATA_STREAM) 1023 host->stop_cmdr |= ATMCI_CMDR_STREAM; 1024 else 1025 host->stop_cmdr |= ATMCI_CMDR_MULTI_BLOCK; 1026 } 1027 1028 /* 1029 * We could have enabled interrupts earlier, but I suspect 1030 * that would open up a nice can of interesting race 1031 * conditions (e.g. command and data complete, but stop not 1032 * prepared yet.) 1033 */ 1034 atmci_writel(host, ATMCI_IER, iflags); 1035 } 1036 1037 static void atmci_queue_request(struct atmel_mci *host, 1038 struct atmel_mci_slot *slot, struct mmc_request *mrq) 1039 { 1040 dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n", 1041 host->state); 1042 1043 spin_lock_bh(&host->lock); 1044 slot->mrq = mrq; 1045 if (host->state == STATE_IDLE) { 1046 host->state = STATE_SENDING_CMD; 1047 atmci_start_request(host, slot); 1048 } else { 1049 list_add_tail(&slot->queue_node, &host->queue); 1050 } 1051 spin_unlock_bh(&host->lock); 1052 } 1053 1054 static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) 1055 { 1056 struct atmel_mci_slot *slot = mmc_priv(mmc); 1057 struct atmel_mci *host = slot->host; 1058 struct mmc_data *data; 1059 1060 WARN_ON(slot->mrq); 1061 1062 /* 1063 * We may "know" the card is gone even though there's still an 1064 * electrical connection. If so, we really need to communicate 1065 * this to the MMC core since there won't be any more 1066 * interrupts as the card is completely removed. Otherwise, 1067 * the MMC core might believe the card is still there even 1068 * though the card was just removed very slowly. 1069 */ 1070 if (!test_bit(ATMCI_CARD_PRESENT, &slot->flags)) { 1071 mrq->cmd->error = -ENOMEDIUM; 1072 mmc_request_done(mmc, mrq); 1073 return; 1074 } 1075 1076 /* We don't support multiple blocks of weird lengths. */ 1077 data = mrq->data; 1078 if (data && data->blocks > 1 && data->blksz & 3) { 1079 mrq->cmd->error = -EINVAL; 1080 mmc_request_done(mmc, mrq); 1081 } 1082 1083 atmci_queue_request(host, slot, mrq); 1084 } 1085 1086 static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) 1087 { 1088 struct atmel_mci_slot *slot = mmc_priv(mmc); 1089 struct atmel_mci *host = slot->host; 1090 unsigned int i; 1091 1092 slot->sdc_reg &= ~ATMCI_SDCBUS_MASK; 1093 switch (ios->bus_width) { 1094 case MMC_BUS_WIDTH_1: 1095 slot->sdc_reg |= ATMCI_SDCBUS_1BIT; 1096 break; 1097 case MMC_BUS_WIDTH_4: 1098 slot->sdc_reg |= ATMCI_SDCBUS_4BIT; 1099 break; 1100 } 1101 1102 if (ios->clock) { 1103 unsigned int clock_min = ~0U; 1104 u32 clkdiv; 1105 1106 spin_lock_bh(&host->lock); 1107 if (!host->mode_reg) { 1108 clk_enable(host->mck); 1109 atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST); 1110 atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN); 1111 if (host->caps.has_cfg_reg) 1112 atmci_writel(host, ATMCI_CFG, host->cfg_reg); 1113 } 1114 1115 /* 1116 * Use mirror of ios->clock to prevent race with mmc 1117 * core ios update when finding the minimum. 1118 */ 1119 slot->clock = ios->clock; 1120 for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { 1121 if (host->slot[i] && host->slot[i]->clock 1122 && host->slot[i]->clock < clock_min) 1123 clock_min = host->slot[i]->clock; 1124 } 1125 1126 /* Calculate clock divider */ 1127 clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * clock_min) - 1; 1128 if (clkdiv > 255) { 1129 dev_warn(&mmc->class_dev, 1130 "clock %u too slow; using %lu\n", 1131 clock_min, host->bus_hz / (2 * 256)); 1132 clkdiv = 255; 1133 } 1134 1135 host->mode_reg = ATMCI_MR_CLKDIV(clkdiv); 1136 1137 /* 1138 * WRPROOF and RDPROOF prevent overruns/underruns by 1139 * stopping the clock when the FIFO is full/empty. 1140 * This state is not expected to last for long. 1141 */ 1142 if (host->caps.has_rwproof) 1143 host->mode_reg |= (ATMCI_MR_WRPROOF | ATMCI_MR_RDPROOF); 1144 1145 if (host->caps.has_cfg_reg) { 1146 /* setup High Speed mode in relation with card capacity */ 1147 if (ios->timing == MMC_TIMING_SD_HS) 1148 host->cfg_reg |= ATMCI_CFG_HSMODE; 1149 else 1150 host->cfg_reg &= ~ATMCI_CFG_HSMODE; 1151 } 1152 1153 if (list_empty(&host->queue)) { 1154 atmci_writel(host, ATMCI_MR, host->mode_reg); 1155 if (host->caps.has_cfg_reg) 1156 atmci_writel(host, ATMCI_CFG, host->cfg_reg); 1157 } else { 1158 host->need_clock_update = true; 1159 } 1160 1161 spin_unlock_bh(&host->lock); 1162 } else { 1163 bool any_slot_active = false; 1164 1165 spin_lock_bh(&host->lock); 1166 slot->clock = 0; 1167 for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { 1168 if (host->slot[i] && host->slot[i]->clock) { 1169 any_slot_active = true; 1170 break; 1171 } 1172 } 1173 if (!any_slot_active) { 1174 atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS); 1175 if (host->mode_reg) { 1176 atmci_readl(host, ATMCI_MR); 1177 clk_disable(host->mck); 1178 } 1179 host->mode_reg = 0; 1180 } 1181 spin_unlock_bh(&host->lock); 1182 } 1183 1184 switch (ios->power_mode) { 1185 case MMC_POWER_UP: 1186 set_bit(ATMCI_CARD_NEED_INIT, &slot->flags); 1187 break; 1188 default: 1189 /* 1190 * TODO: None of the currently available AVR32-based 1191 * boards allow MMC power to be turned off. Implement 1192 * power control when this can be tested properly. 1193 * 1194 * We also need to hook this into the clock management 1195 * somehow so that newly inserted cards aren't 1196 * subjected to a fast clock before we have a chance 1197 * to figure out what the maximum rate is. Currently, 1198 * there's no way to avoid this, and there never will 1199 * be for boards that don't support power control. 1200 */ 1201 break; 1202 } 1203 } 1204 1205 static int atmci_get_ro(struct mmc_host *mmc) 1206 { 1207 int read_only = -ENOSYS; 1208 struct atmel_mci_slot *slot = mmc_priv(mmc); 1209 1210 if (gpio_is_valid(slot->wp_pin)) { 1211 read_only = gpio_get_value(slot->wp_pin); 1212 dev_dbg(&mmc->class_dev, "card is %s\n", 1213 read_only ? "read-only" : "read-write"); 1214 } 1215 1216 return read_only; 1217 } 1218 1219 static int atmci_get_cd(struct mmc_host *mmc) 1220 { 1221 int present = -ENOSYS; 1222 struct atmel_mci_slot *slot = mmc_priv(mmc); 1223 1224 if (gpio_is_valid(slot->detect_pin)) { 1225 present = !(gpio_get_value(slot->detect_pin) ^ 1226 slot->detect_is_active_high); 1227 dev_dbg(&mmc->class_dev, "card is %spresent\n", 1228 present ? "" : "not "); 1229 } 1230 1231 return present; 1232 } 1233 1234 static void atmci_enable_sdio_irq(struct mmc_host *mmc, int enable) 1235 { 1236 struct atmel_mci_slot *slot = mmc_priv(mmc); 1237 struct atmel_mci *host = slot->host; 1238 1239 if (enable) 1240 atmci_writel(host, ATMCI_IER, slot->sdio_irq); 1241 else 1242 atmci_writel(host, ATMCI_IDR, slot->sdio_irq); 1243 } 1244 1245 static const struct mmc_host_ops atmci_ops = { 1246 .request = atmci_request, 1247 .set_ios = atmci_set_ios, 1248 .get_ro = atmci_get_ro, 1249 .get_cd = atmci_get_cd, 1250 .enable_sdio_irq = atmci_enable_sdio_irq, 1251 }; 1252 1253 /* Called with host->lock held */ 1254 static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq) 1255 __releases(&host->lock) 1256 __acquires(&host->lock) 1257 { 1258 struct atmel_mci_slot *slot = NULL; 1259 struct mmc_host *prev_mmc = host->cur_slot->mmc; 1260 1261 WARN_ON(host->cmd || host->data); 1262 1263 /* 1264 * Update the MMC clock rate if necessary. This may be 1265 * necessary if set_ios() is called when a different slot is 1266 * busy transferring data. 1267 */ 1268 if (host->need_clock_update) { 1269 atmci_writel(host, ATMCI_MR, host->mode_reg); 1270 if (host->caps.has_cfg_reg) 1271 atmci_writel(host, ATMCI_CFG, host->cfg_reg); 1272 } 1273 1274 host->cur_slot->mrq = NULL; 1275 host->mrq = NULL; 1276 if (!list_empty(&host->queue)) { 1277 slot = list_entry(host->queue.next, 1278 struct atmel_mci_slot, queue_node); 1279 list_del(&slot->queue_node); 1280 dev_vdbg(&host->pdev->dev, "list not empty: %s is next\n", 1281 mmc_hostname(slot->mmc)); 1282 host->state = STATE_SENDING_CMD; 1283 atmci_start_request(host, slot); 1284 } else { 1285 dev_vdbg(&host->pdev->dev, "list empty\n"); 1286 host->state = STATE_IDLE; 1287 } 1288 1289 spin_unlock(&host->lock); 1290 mmc_request_done(prev_mmc, mrq); 1291 spin_lock(&host->lock); 1292 } 1293 1294 static void atmci_command_complete(struct atmel_mci *host, 1295 struct mmc_command *cmd) 1296 { 1297 u32 status = host->cmd_status; 1298 1299 /* Read the response from the card (up to 16 bytes) */ 1300 cmd->resp[0] = atmci_readl(host, ATMCI_RSPR); 1301 cmd->resp[1] = atmci_readl(host, ATMCI_RSPR); 1302 cmd->resp[2] = atmci_readl(host, ATMCI_RSPR); 1303 cmd->resp[3] = atmci_readl(host, ATMCI_RSPR); 1304 1305 if (status & ATMCI_RTOE) 1306 cmd->error = -ETIMEDOUT; 1307 else if ((cmd->flags & MMC_RSP_CRC) && (status & ATMCI_RCRCE)) 1308 cmd->error = -EILSEQ; 1309 else if (status & (ATMCI_RINDE | ATMCI_RDIRE | ATMCI_RENDE)) 1310 cmd->error = -EIO; 1311 else 1312 cmd->error = 0; 1313 1314 if (cmd->error) { 1315 dev_dbg(&host->pdev->dev, 1316 "command error: status=0x%08x\n", status); 1317 1318 if (cmd->data) { 1319 host->stop_transfer(host); 1320 host->data = NULL; 1321 atmci_writel(host, ATMCI_IDR, ATMCI_NOTBUSY 1322 | ATMCI_TXRDY | ATMCI_RXRDY 1323 | ATMCI_DATA_ERROR_FLAGS); 1324 } 1325 } 1326 } 1327 1328 static void atmci_detect_change(unsigned long data) 1329 { 1330 struct atmel_mci_slot *slot = (struct atmel_mci_slot *)data; 1331 bool present; 1332 bool present_old; 1333 1334 /* 1335 * atmci_cleanup_slot() sets the ATMCI_SHUTDOWN flag before 1336 * freeing the interrupt. We must not re-enable the interrupt 1337 * if it has been freed, and if we're shutting down, it 1338 * doesn't really matter whether the card is present or not. 1339 */ 1340 smp_rmb(); 1341 if (test_bit(ATMCI_SHUTDOWN, &slot->flags)) 1342 return; 1343 1344 enable_irq(gpio_to_irq(slot->detect_pin)); 1345 present = !(gpio_get_value(slot->detect_pin) ^ 1346 slot->detect_is_active_high); 1347 present_old = test_bit(ATMCI_CARD_PRESENT, &slot->flags); 1348 1349 dev_vdbg(&slot->mmc->class_dev, "detect change: %d (was %d)\n", 1350 present, present_old); 1351 1352 if (present != present_old) { 1353 struct atmel_mci *host = slot->host; 1354 struct mmc_request *mrq; 1355 1356 dev_dbg(&slot->mmc->class_dev, "card %s\n", 1357 present ? "inserted" : "removed"); 1358 1359 spin_lock(&host->lock); 1360 1361 if (!present) 1362 clear_bit(ATMCI_CARD_PRESENT, &slot->flags); 1363 else 1364 set_bit(ATMCI_CARD_PRESENT, &slot->flags); 1365 1366 /* Clean up queue if present */ 1367 mrq = slot->mrq; 1368 if (mrq) { 1369 if (mrq == host->mrq) { 1370 /* 1371 * Reset controller to terminate any ongoing 1372 * commands or data transfers. 1373 */ 1374 atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST); 1375 atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN); 1376 atmci_writel(host, ATMCI_MR, host->mode_reg); 1377 if (host->caps.has_cfg_reg) 1378 atmci_writel(host, ATMCI_CFG, host->cfg_reg); 1379 1380 host->data = NULL; 1381 host->cmd = NULL; 1382 1383 switch (host->state) { 1384 case STATE_IDLE: 1385 break; 1386 case STATE_SENDING_CMD: 1387 mrq->cmd->error = -ENOMEDIUM; 1388 if (!mrq->data) 1389 break; 1390 /* fall through */ 1391 case STATE_SENDING_DATA: 1392 mrq->data->error = -ENOMEDIUM; 1393 host->stop_transfer(host); 1394 break; 1395 case STATE_DATA_BUSY: 1396 case STATE_DATA_ERROR: 1397 if (mrq->data->error == -EINPROGRESS) 1398 mrq->data->error = -ENOMEDIUM; 1399 if (!mrq->stop) 1400 break; 1401 /* fall through */ 1402 case STATE_SENDING_STOP: 1403 mrq->stop->error = -ENOMEDIUM; 1404 break; 1405 } 1406 1407 atmci_request_end(host, mrq); 1408 } else { 1409 list_del(&slot->queue_node); 1410 mrq->cmd->error = -ENOMEDIUM; 1411 if (mrq->data) 1412 mrq->data->error = -ENOMEDIUM; 1413 if (mrq->stop) 1414 mrq->stop->error = -ENOMEDIUM; 1415 1416 spin_unlock(&host->lock); 1417 mmc_request_done(slot->mmc, mrq); 1418 spin_lock(&host->lock); 1419 } 1420 } 1421 spin_unlock(&host->lock); 1422 1423 mmc_detect_change(slot->mmc, 0); 1424 } 1425 } 1426 1427 static void atmci_tasklet_func(unsigned long priv) 1428 { 1429 struct atmel_mci *host = (struct atmel_mci *)priv; 1430 struct mmc_request *mrq = host->mrq; 1431 struct mmc_data *data = host->data; 1432 struct mmc_command *cmd = host->cmd; 1433 enum atmel_mci_state state = host->state; 1434 enum atmel_mci_state prev_state; 1435 u32 status; 1436 1437 spin_lock(&host->lock); 1438 1439 state = host->state; 1440 1441 dev_vdbg(&host->pdev->dev, 1442 "tasklet: state %u pending/completed/mask %lx/%lx/%x\n", 1443 state, host->pending_events, host->completed_events, 1444 atmci_readl(host, ATMCI_IMR)); 1445 1446 do { 1447 prev_state = state; 1448 1449 switch (state) { 1450 case STATE_IDLE: 1451 break; 1452 1453 case STATE_SENDING_CMD: 1454 if (!atmci_test_and_clear_pending(host, 1455 EVENT_CMD_COMPLETE)) 1456 break; 1457 1458 host->cmd = NULL; 1459 atmci_set_completed(host, EVENT_CMD_COMPLETE); 1460 atmci_command_complete(host, mrq->cmd); 1461 if (!mrq->data || cmd->error) { 1462 atmci_request_end(host, host->mrq); 1463 goto unlock; 1464 } 1465 1466 prev_state = state = STATE_SENDING_DATA; 1467 /* fall through */ 1468 1469 case STATE_SENDING_DATA: 1470 if (atmci_test_and_clear_pending(host, 1471 EVENT_DATA_ERROR)) { 1472 host->stop_transfer(host); 1473 if (data->stop) 1474 atmci_send_stop_cmd(host, data); 1475 state = STATE_DATA_ERROR; 1476 break; 1477 } 1478 1479 if (!atmci_test_and_clear_pending(host, 1480 EVENT_XFER_COMPLETE)) 1481 break; 1482 1483 atmci_set_completed(host, EVENT_XFER_COMPLETE); 1484 prev_state = state = STATE_DATA_BUSY; 1485 /* fall through */ 1486 1487 case STATE_DATA_BUSY: 1488 if (!atmci_test_and_clear_pending(host, 1489 EVENT_DATA_COMPLETE)) 1490 break; 1491 1492 host->data = NULL; 1493 atmci_set_completed(host, EVENT_DATA_COMPLETE); 1494 status = host->data_status; 1495 if (unlikely(status & ATMCI_DATA_ERROR_FLAGS)) { 1496 if (status & ATMCI_DTOE) { 1497 dev_dbg(&host->pdev->dev, 1498 "data timeout error\n"); 1499 data->error = -ETIMEDOUT; 1500 } else if (status & ATMCI_DCRCE) { 1501 dev_dbg(&host->pdev->dev, 1502 "data CRC error\n"); 1503 data->error = -EILSEQ; 1504 } else { 1505 dev_dbg(&host->pdev->dev, 1506 "data FIFO error (status=%08x)\n", 1507 status); 1508 data->error = -EIO; 1509 } 1510 } else { 1511 data->bytes_xfered = data->blocks * data->blksz; 1512 data->error = 0; 1513 atmci_writel(host, ATMCI_IDR, ATMCI_DATA_ERROR_FLAGS); 1514 } 1515 1516 if (!data->stop) { 1517 atmci_request_end(host, host->mrq); 1518 goto unlock; 1519 } 1520 1521 prev_state = state = STATE_SENDING_STOP; 1522 if (!data->error) 1523 atmci_send_stop_cmd(host, data); 1524 /* fall through */ 1525 1526 case STATE_SENDING_STOP: 1527 if (!atmci_test_and_clear_pending(host, 1528 EVENT_CMD_COMPLETE)) 1529 break; 1530 1531 host->cmd = NULL; 1532 atmci_command_complete(host, mrq->stop); 1533 atmci_request_end(host, host->mrq); 1534 goto unlock; 1535 1536 case STATE_DATA_ERROR: 1537 if (!atmci_test_and_clear_pending(host, 1538 EVENT_XFER_COMPLETE)) 1539 break; 1540 1541 state = STATE_DATA_BUSY; 1542 break; 1543 } 1544 } while (state != prev_state); 1545 1546 host->state = state; 1547 1548 unlock: 1549 spin_unlock(&host->lock); 1550 } 1551 1552 static void atmci_read_data_pio(struct atmel_mci *host) 1553 { 1554 struct scatterlist *sg = host->sg; 1555 void *buf = sg_virt(sg); 1556 unsigned int offset = host->pio_offset; 1557 struct mmc_data *data = host->data; 1558 u32 value; 1559 u32 status; 1560 unsigned int nbytes = 0; 1561 1562 do { 1563 value = atmci_readl(host, ATMCI_RDR); 1564 if (likely(offset + 4 <= sg->length)) { 1565 put_unaligned(value, (u32 *)(buf + offset)); 1566 1567 offset += 4; 1568 nbytes += 4; 1569 1570 if (offset == sg->length) { 1571 flush_dcache_page(sg_page(sg)); 1572 host->sg = sg = sg_next(sg); 1573 if (!sg) 1574 goto done; 1575 1576 offset = 0; 1577 buf = sg_virt(sg); 1578 } 1579 } else { 1580 unsigned int remaining = sg->length - offset; 1581 memcpy(buf + offset, &value, remaining); 1582 nbytes += remaining; 1583 1584 flush_dcache_page(sg_page(sg)); 1585 host->sg = sg = sg_next(sg); 1586 if (!sg) 1587 goto done; 1588 1589 offset = 4 - remaining; 1590 buf = sg_virt(sg); 1591 memcpy(buf, (u8 *)&value + remaining, offset); 1592 nbytes += offset; 1593 } 1594 1595 status = atmci_readl(host, ATMCI_SR); 1596 if (status & ATMCI_DATA_ERROR_FLAGS) { 1597 atmci_writel(host, ATMCI_IDR, (ATMCI_NOTBUSY | ATMCI_RXRDY 1598 | ATMCI_DATA_ERROR_FLAGS)); 1599 host->data_status = status; 1600 data->bytes_xfered += nbytes; 1601 smp_wmb(); 1602 atmci_set_pending(host, EVENT_DATA_ERROR); 1603 tasklet_schedule(&host->tasklet); 1604 return; 1605 } 1606 } while (status & ATMCI_RXRDY); 1607 1608 host->pio_offset = offset; 1609 data->bytes_xfered += nbytes; 1610 1611 return; 1612 1613 done: 1614 atmci_writel(host, ATMCI_IDR, ATMCI_RXRDY); 1615 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); 1616 data->bytes_xfered += nbytes; 1617 smp_wmb(); 1618 atmci_set_pending(host, EVENT_XFER_COMPLETE); 1619 } 1620 1621 static void atmci_write_data_pio(struct atmel_mci *host) 1622 { 1623 struct scatterlist *sg = host->sg; 1624 void *buf = sg_virt(sg); 1625 unsigned int offset = host->pio_offset; 1626 struct mmc_data *data = host->data; 1627 u32 value; 1628 u32 status; 1629 unsigned int nbytes = 0; 1630 1631 do { 1632 if (likely(offset + 4 <= sg->length)) { 1633 value = get_unaligned((u32 *)(buf + offset)); 1634 atmci_writel(host, ATMCI_TDR, value); 1635 1636 offset += 4; 1637 nbytes += 4; 1638 if (offset == sg->length) { 1639 host->sg = sg = sg_next(sg); 1640 if (!sg) 1641 goto done; 1642 1643 offset = 0; 1644 buf = sg_virt(sg); 1645 } 1646 } else { 1647 unsigned int remaining = sg->length - offset; 1648 1649 value = 0; 1650 memcpy(&value, buf + offset, remaining); 1651 nbytes += remaining; 1652 1653 host->sg = sg = sg_next(sg); 1654 if (!sg) { 1655 atmci_writel(host, ATMCI_TDR, value); 1656 goto done; 1657 } 1658 1659 offset = 4 - remaining; 1660 buf = sg_virt(sg); 1661 memcpy((u8 *)&value + remaining, buf, offset); 1662 atmci_writel(host, ATMCI_TDR, value); 1663 nbytes += offset; 1664 } 1665 1666 status = atmci_readl(host, ATMCI_SR); 1667 if (status & ATMCI_DATA_ERROR_FLAGS) { 1668 atmci_writel(host, ATMCI_IDR, (ATMCI_NOTBUSY | ATMCI_TXRDY 1669 | ATMCI_DATA_ERROR_FLAGS)); 1670 host->data_status = status; 1671 data->bytes_xfered += nbytes; 1672 smp_wmb(); 1673 atmci_set_pending(host, EVENT_DATA_ERROR); 1674 tasklet_schedule(&host->tasklet); 1675 return; 1676 } 1677 } while (status & ATMCI_TXRDY); 1678 1679 host->pio_offset = offset; 1680 data->bytes_xfered += nbytes; 1681 1682 return; 1683 1684 done: 1685 atmci_writel(host, ATMCI_IDR, ATMCI_TXRDY); 1686 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); 1687 data->bytes_xfered += nbytes; 1688 smp_wmb(); 1689 atmci_set_pending(host, EVENT_XFER_COMPLETE); 1690 } 1691 1692 static void atmci_cmd_interrupt(struct atmel_mci *host, u32 status) 1693 { 1694 atmci_writel(host, ATMCI_IDR, ATMCI_CMDRDY); 1695 1696 host->cmd_status = status; 1697 smp_wmb(); 1698 atmci_set_pending(host, EVENT_CMD_COMPLETE); 1699 tasklet_schedule(&host->tasklet); 1700 } 1701 1702 static void atmci_sdio_interrupt(struct atmel_mci *host, u32 status) 1703 { 1704 int i; 1705 1706 for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { 1707 struct atmel_mci_slot *slot = host->slot[i]; 1708 if (slot && (status & slot->sdio_irq)) { 1709 mmc_signal_sdio_irq(slot->mmc); 1710 } 1711 } 1712 } 1713 1714 1715 static irqreturn_t atmci_interrupt(int irq, void *dev_id) 1716 { 1717 struct atmel_mci *host = dev_id; 1718 u32 status, mask, pending; 1719 unsigned int pass_count = 0; 1720 1721 do { 1722 status = atmci_readl(host, ATMCI_SR); 1723 mask = atmci_readl(host, ATMCI_IMR); 1724 pending = status & mask; 1725 if (!pending) 1726 break; 1727 1728 if (pending & ATMCI_DATA_ERROR_FLAGS) { 1729 atmci_writel(host, ATMCI_IDR, ATMCI_DATA_ERROR_FLAGS 1730 | ATMCI_RXRDY | ATMCI_TXRDY); 1731 pending &= atmci_readl(host, ATMCI_IMR); 1732 1733 host->data_status = status; 1734 smp_wmb(); 1735 atmci_set_pending(host, EVENT_DATA_ERROR); 1736 tasklet_schedule(&host->tasklet); 1737 } 1738 1739 if (pending & ATMCI_TXBUFE) { 1740 atmci_writel(host, ATMCI_IDR, ATMCI_TXBUFE); 1741 atmci_writel(host, ATMCI_IDR, ATMCI_ENDTX); 1742 /* 1743 * We can receive this interruption before having configured 1744 * the second pdc buffer, so we need to reconfigure first and 1745 * second buffers again 1746 */ 1747 if (host->data_size) { 1748 atmci_pdc_set_both_buf(host, XFER_TRANSMIT); 1749 atmci_writel(host, ATMCI_IER, ATMCI_ENDTX); 1750 atmci_writel(host, ATMCI_IER, ATMCI_TXBUFE); 1751 } else { 1752 atmci_pdc_complete(host); 1753 } 1754 } else if (pending & ATMCI_ENDTX) { 1755 atmci_writel(host, ATMCI_IDR, ATMCI_ENDTX); 1756 1757 if (host->data_size) { 1758 atmci_pdc_set_single_buf(host, 1759 XFER_TRANSMIT, PDC_SECOND_BUF); 1760 atmci_writel(host, ATMCI_IER, ATMCI_ENDTX); 1761 } 1762 } 1763 1764 if (pending & ATMCI_RXBUFF) { 1765 atmci_writel(host, ATMCI_IDR, ATMCI_RXBUFF); 1766 atmci_writel(host, ATMCI_IDR, ATMCI_ENDRX); 1767 /* 1768 * We can receive this interruption before having configured 1769 * the second pdc buffer, so we need to reconfigure first and 1770 * second buffers again 1771 */ 1772 if (host->data_size) { 1773 atmci_pdc_set_both_buf(host, XFER_RECEIVE); 1774 atmci_writel(host, ATMCI_IER, ATMCI_ENDRX); 1775 atmci_writel(host, ATMCI_IER, ATMCI_RXBUFF); 1776 } else { 1777 atmci_pdc_complete(host); 1778 } 1779 } else if (pending & ATMCI_ENDRX) { 1780 atmci_writel(host, ATMCI_IDR, ATMCI_ENDRX); 1781 1782 if (host->data_size) { 1783 atmci_pdc_set_single_buf(host, 1784 XFER_RECEIVE, PDC_SECOND_BUF); 1785 atmci_writel(host, ATMCI_IER, ATMCI_ENDRX); 1786 } 1787 } 1788 1789 1790 if (pending & ATMCI_NOTBUSY) { 1791 atmci_writel(host, ATMCI_IDR, 1792 ATMCI_DATA_ERROR_FLAGS | ATMCI_NOTBUSY); 1793 if (!host->data_status) 1794 host->data_status = status; 1795 smp_wmb(); 1796 atmci_set_pending(host, EVENT_DATA_COMPLETE); 1797 tasklet_schedule(&host->tasklet); 1798 } 1799 if (pending & ATMCI_RXRDY) 1800 atmci_read_data_pio(host); 1801 if (pending & ATMCI_TXRDY) 1802 atmci_write_data_pio(host); 1803 1804 if (pending & ATMCI_CMDRDY) 1805 atmci_cmd_interrupt(host, status); 1806 1807 if (pending & (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB)) 1808 atmci_sdio_interrupt(host, status); 1809 1810 } while (pass_count++ < 5); 1811 1812 return pass_count ? IRQ_HANDLED : IRQ_NONE; 1813 } 1814 1815 static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id) 1816 { 1817 struct atmel_mci_slot *slot = dev_id; 1818 1819 /* 1820 * Disable interrupts until the pin has stabilized and check 1821 * the state then. Use mod_timer() since we may be in the 1822 * middle of the timer routine when this interrupt triggers. 1823 */ 1824 disable_irq_nosync(irq); 1825 mod_timer(&slot->detect_timer, jiffies + msecs_to_jiffies(20)); 1826 1827 return IRQ_HANDLED; 1828 } 1829 1830 static int __init atmci_init_slot(struct atmel_mci *host, 1831 struct mci_slot_pdata *slot_data, unsigned int id, 1832 u32 sdc_reg, u32 sdio_irq) 1833 { 1834 struct mmc_host *mmc; 1835 struct atmel_mci_slot *slot; 1836 1837 mmc = mmc_alloc_host(sizeof(struct atmel_mci_slot), &host->pdev->dev); 1838 if (!mmc) 1839 return -ENOMEM; 1840 1841 slot = mmc_priv(mmc); 1842 slot->mmc = mmc; 1843 slot->host = host; 1844 slot->detect_pin = slot_data->detect_pin; 1845 slot->wp_pin = slot_data->wp_pin; 1846 slot->detect_is_active_high = slot_data->detect_is_active_high; 1847 slot->sdc_reg = sdc_reg; 1848 slot->sdio_irq = sdio_irq; 1849 1850 mmc->ops = &atmci_ops; 1851 mmc->f_min = DIV_ROUND_UP(host->bus_hz, 512); 1852 mmc->f_max = host->bus_hz / 2; 1853 mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; 1854 if (sdio_irq) 1855 mmc->caps |= MMC_CAP_SDIO_IRQ; 1856 if (host->caps.has_highspeed) 1857 mmc->caps |= MMC_CAP_SD_HIGHSPEED; 1858 if (slot_data->bus_width >= 4) 1859 mmc->caps |= MMC_CAP_4_BIT_DATA; 1860 1861 mmc->max_segs = 64; 1862 mmc->max_req_size = 32768 * 512; 1863 mmc->max_blk_size = 32768; 1864 mmc->max_blk_count = 512; 1865 1866 /* Assume card is present initially */ 1867 set_bit(ATMCI_CARD_PRESENT, &slot->flags); 1868 if (gpio_is_valid(slot->detect_pin)) { 1869 if (gpio_request(slot->detect_pin, "mmc_detect")) { 1870 dev_dbg(&mmc->class_dev, "no detect pin available\n"); 1871 slot->detect_pin = -EBUSY; 1872 } else if (gpio_get_value(slot->detect_pin) ^ 1873 slot->detect_is_active_high) { 1874 clear_bit(ATMCI_CARD_PRESENT, &slot->flags); 1875 } 1876 } 1877 1878 if (!gpio_is_valid(slot->detect_pin)) 1879 mmc->caps |= MMC_CAP_NEEDS_POLL; 1880 1881 if (gpio_is_valid(slot->wp_pin)) { 1882 if (gpio_request(slot->wp_pin, "mmc_wp")) { 1883 dev_dbg(&mmc->class_dev, "no WP pin available\n"); 1884 slot->wp_pin = -EBUSY; 1885 } 1886 } 1887 1888 host->slot[id] = slot; 1889 mmc_add_host(mmc); 1890 1891 if (gpio_is_valid(slot->detect_pin)) { 1892 int ret; 1893 1894 setup_timer(&slot->detect_timer, atmci_detect_change, 1895 (unsigned long)slot); 1896 1897 ret = request_irq(gpio_to_irq(slot->detect_pin), 1898 atmci_detect_interrupt, 1899 IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, 1900 "mmc-detect", slot); 1901 if (ret) { 1902 dev_dbg(&mmc->class_dev, 1903 "could not request IRQ %d for detect pin\n", 1904 gpio_to_irq(slot->detect_pin)); 1905 gpio_free(slot->detect_pin); 1906 slot->detect_pin = -EBUSY; 1907 } 1908 } 1909 1910 atmci_init_debugfs(slot); 1911 1912 return 0; 1913 } 1914 1915 static void __exit atmci_cleanup_slot(struct atmel_mci_slot *slot, 1916 unsigned int id) 1917 { 1918 /* Debugfs stuff is cleaned up by mmc core */ 1919 1920 set_bit(ATMCI_SHUTDOWN, &slot->flags); 1921 smp_wmb(); 1922 1923 mmc_remove_host(slot->mmc); 1924 1925 if (gpio_is_valid(slot->detect_pin)) { 1926 int pin = slot->detect_pin; 1927 1928 free_irq(gpio_to_irq(pin), slot); 1929 del_timer_sync(&slot->detect_timer); 1930 gpio_free(pin); 1931 } 1932 if (gpio_is_valid(slot->wp_pin)) 1933 gpio_free(slot->wp_pin); 1934 1935 slot->host->slot[id] = NULL; 1936 mmc_free_host(slot->mmc); 1937 } 1938 1939 static bool atmci_filter(struct dma_chan *chan, void *slave) 1940 { 1941 struct mci_dma_data *sl = slave; 1942 1943 if (sl && find_slave_dev(sl) == chan->device->dev) { 1944 chan->private = slave_data_ptr(sl); 1945 return true; 1946 } else { 1947 return false; 1948 } 1949 } 1950 1951 static void atmci_configure_dma(struct atmel_mci *host) 1952 { 1953 struct mci_platform_data *pdata; 1954 1955 if (host == NULL) 1956 return; 1957 1958 pdata = host->pdev->dev.platform_data; 1959 1960 if (pdata && find_slave_dev(pdata->dma_slave)) { 1961 dma_cap_mask_t mask; 1962 1963 setup_dma_addr(pdata->dma_slave, 1964 host->mapbase + ATMCI_TDR, 1965 host->mapbase + ATMCI_RDR); 1966 1967 /* Try to grab a DMA channel */ 1968 dma_cap_zero(mask); 1969 dma_cap_set(DMA_SLAVE, mask); 1970 host->dma.chan = 1971 dma_request_channel(mask, atmci_filter, pdata->dma_slave); 1972 } 1973 if (!host->dma.chan) 1974 dev_notice(&host->pdev->dev, "DMA not available, using PIO\n"); 1975 else 1976 dev_info(&host->pdev->dev, 1977 "Using %s for DMA transfers\n", 1978 dma_chan_name(host->dma.chan)); 1979 } 1980 1981 static inline unsigned int atmci_get_version(struct atmel_mci *host) 1982 { 1983 return atmci_readl(host, ATMCI_VERSION) & 0x00000fff; 1984 } 1985 1986 /* 1987 * HSMCI (High Speed MCI) module is not fully compatible with MCI module. 1988 * HSMCI provides DMA support and a new config register but no more supports 1989 * PDC. 1990 */ 1991 static void __init atmci_get_cap(struct atmel_mci *host) 1992 { 1993 unsigned int version; 1994 1995 version = atmci_get_version(host); 1996 dev_info(&host->pdev->dev, 1997 "version: 0x%x\n", version); 1998 1999 host->caps.has_dma = 0; 2000 host->caps.has_pdc = 0; 2001 host->caps.has_cfg_reg = 0; 2002 host->caps.has_cstor_reg = 0; 2003 host->caps.has_highspeed = 0; 2004 host->caps.has_rwproof = 0; 2005 2006 /* keep only major version number */ 2007 switch (version & 0xf00) { 2008 case 0x100: 2009 case 0x200: 2010 host->caps.has_pdc = 1; 2011 host->caps.has_rwproof = 1; 2012 break; 2013 case 0x300: 2014 case 0x400: 2015 case 0x500: 2016 #ifdef CONFIG_AT_HDMAC 2017 host->caps.has_dma = 1; 2018 #else 2019 host->caps.has_dma = 0; 2020 dev_info(&host->pdev->dev, 2021 "has dma capability but dma engine is not selected, then use pio\n"); 2022 #endif 2023 host->caps.has_cfg_reg = 1; 2024 host->caps.has_cstor_reg = 1; 2025 host->caps.has_highspeed = 1; 2026 host->caps.has_rwproof = 1; 2027 break; 2028 default: 2029 dev_warn(&host->pdev->dev, 2030 "Unmanaged mci version, set minimum capabilities\n"); 2031 break; 2032 } 2033 } 2034 2035 static int __init atmci_probe(struct platform_device *pdev) 2036 { 2037 struct mci_platform_data *pdata; 2038 struct atmel_mci *host; 2039 struct resource *regs; 2040 unsigned int nr_slots; 2041 int irq; 2042 int ret; 2043 2044 regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); 2045 if (!regs) 2046 return -ENXIO; 2047 pdata = pdev->dev.platform_data; 2048 if (!pdata) 2049 return -ENXIO; 2050 irq = platform_get_irq(pdev, 0); 2051 if (irq < 0) 2052 return irq; 2053 2054 host = kzalloc(sizeof(struct atmel_mci), GFP_KERNEL); 2055 if (!host) 2056 return -ENOMEM; 2057 2058 host->pdev = pdev; 2059 spin_lock_init(&host->lock); 2060 INIT_LIST_HEAD(&host->queue); 2061 2062 host->mck = clk_get(&pdev->dev, "mci_clk"); 2063 if (IS_ERR(host->mck)) { 2064 ret = PTR_ERR(host->mck); 2065 goto err_clk_get; 2066 } 2067 2068 ret = -ENOMEM; 2069 host->regs = ioremap(regs->start, resource_size(regs)); 2070 if (!host->regs) 2071 goto err_ioremap; 2072 2073 clk_enable(host->mck); 2074 atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST); 2075 host->bus_hz = clk_get_rate(host->mck); 2076 clk_disable(host->mck); 2077 2078 host->mapbase = regs->start; 2079 2080 tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)host); 2081 2082 ret = request_irq(irq, atmci_interrupt, 0, dev_name(&pdev->dev), host); 2083 if (ret) 2084 goto err_request_irq; 2085 2086 /* Get MCI capabilities and set operations according to it */ 2087 atmci_get_cap(host); 2088 if (host->caps.has_dma) { 2089 dev_info(&pdev->dev, "using DMA\n"); 2090 host->prepare_data = &atmci_prepare_data_dma; 2091 host->submit_data = &atmci_submit_data_dma; 2092 host->stop_transfer = &atmci_stop_transfer_dma; 2093 } else if (host->caps.has_pdc) { 2094 dev_info(&pdev->dev, "using PDC\n"); 2095 host->prepare_data = &atmci_prepare_data_pdc; 2096 host->submit_data = &atmci_submit_data_pdc; 2097 host->stop_transfer = &atmci_stop_transfer_pdc; 2098 } else { 2099 dev_info(&pdev->dev, "no DMA, no PDC\n"); 2100 host->prepare_data = &atmci_prepare_data; 2101 host->submit_data = &atmci_submit_data; 2102 host->stop_transfer = &atmci_stop_transfer; 2103 } 2104 2105 if (host->caps.has_dma) 2106 atmci_configure_dma(host); 2107 2108 platform_set_drvdata(pdev, host); 2109 2110 /* We need at least one slot to succeed */ 2111 nr_slots = 0; 2112 ret = -ENODEV; 2113 if (pdata->slot[0].bus_width) { 2114 ret = atmci_init_slot(host, &pdata->slot[0], 2115 0, ATMCI_SDCSEL_SLOT_A, ATMCI_SDIOIRQA); 2116 if (!ret) 2117 nr_slots++; 2118 } 2119 if (pdata->slot[1].bus_width) { 2120 ret = atmci_init_slot(host, &pdata->slot[1], 2121 1, ATMCI_SDCSEL_SLOT_B, ATMCI_SDIOIRQB); 2122 if (!ret) 2123 nr_slots++; 2124 } 2125 2126 if (!nr_slots) { 2127 dev_err(&pdev->dev, "init failed: no slot defined\n"); 2128 goto err_init_slot; 2129 } 2130 2131 dev_info(&pdev->dev, 2132 "Atmel MCI controller at 0x%08lx irq %d, %u slots\n", 2133 host->mapbase, irq, nr_slots); 2134 2135 return 0; 2136 2137 err_init_slot: 2138 if (host->dma.chan) 2139 dma_release_channel(host->dma.chan); 2140 free_irq(irq, host); 2141 err_request_irq: 2142 iounmap(host->regs); 2143 err_ioremap: 2144 clk_put(host->mck); 2145 err_clk_get: 2146 kfree(host); 2147 return ret; 2148 } 2149 2150 static int __exit atmci_remove(struct platform_device *pdev) 2151 { 2152 struct atmel_mci *host = platform_get_drvdata(pdev); 2153 unsigned int i; 2154 2155 platform_set_drvdata(pdev, NULL); 2156 2157 for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { 2158 if (host->slot[i]) 2159 atmci_cleanup_slot(host->slot[i], i); 2160 } 2161 2162 clk_enable(host->mck); 2163 atmci_writel(host, ATMCI_IDR, ~0UL); 2164 atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS); 2165 atmci_readl(host, ATMCI_SR); 2166 clk_disable(host->mck); 2167 2168 #ifdef CONFIG_MMC_ATMELMCI_DMA 2169 if (host->dma.chan) 2170 dma_release_channel(host->dma.chan); 2171 #endif 2172 2173 free_irq(platform_get_irq(pdev, 0), host); 2174 iounmap(host->regs); 2175 2176 clk_put(host->mck); 2177 kfree(host); 2178 2179 return 0; 2180 } 2181 2182 #ifdef CONFIG_PM 2183 static int atmci_suspend(struct device *dev) 2184 { 2185 struct atmel_mci *host = dev_get_drvdata(dev); 2186 int i; 2187 2188 for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { 2189 struct atmel_mci_slot *slot = host->slot[i]; 2190 int ret; 2191 2192 if (!slot) 2193 continue; 2194 ret = mmc_suspend_host(slot->mmc); 2195 if (ret < 0) { 2196 while (--i >= 0) { 2197 slot = host->slot[i]; 2198 if (slot 2199 && test_bit(ATMCI_SUSPENDED, &slot->flags)) { 2200 mmc_resume_host(host->slot[i]->mmc); 2201 clear_bit(ATMCI_SUSPENDED, &slot->flags); 2202 } 2203 } 2204 return ret; 2205 } else { 2206 set_bit(ATMCI_SUSPENDED, &slot->flags); 2207 } 2208 } 2209 2210 return 0; 2211 } 2212 2213 static int atmci_resume(struct device *dev) 2214 { 2215 struct atmel_mci *host = dev_get_drvdata(dev); 2216 int i; 2217 int ret = 0; 2218 2219 for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { 2220 struct atmel_mci_slot *slot = host->slot[i]; 2221 int err; 2222 2223 slot = host->slot[i]; 2224 if (!slot) 2225 continue; 2226 if (!test_bit(ATMCI_SUSPENDED, &slot->flags)) 2227 continue; 2228 err = mmc_resume_host(slot->mmc); 2229 if (err < 0) 2230 ret = err; 2231 else 2232 clear_bit(ATMCI_SUSPENDED, &slot->flags); 2233 } 2234 2235 return ret; 2236 } 2237 static SIMPLE_DEV_PM_OPS(atmci_pm, atmci_suspend, atmci_resume); 2238 #define ATMCI_PM_OPS (&atmci_pm) 2239 #else 2240 #define ATMCI_PM_OPS NULL 2241 #endif 2242 2243 static struct platform_driver atmci_driver = { 2244 .remove = __exit_p(atmci_remove), 2245 .driver = { 2246 .name = "atmel_mci", 2247 .pm = ATMCI_PM_OPS, 2248 }, 2249 }; 2250 2251 static int __init atmci_init(void) 2252 { 2253 return platform_driver_probe(&atmci_driver, atmci_probe); 2254 } 2255 2256 static void __exit atmci_exit(void) 2257 { 2258 platform_driver_unregister(&atmci_driver); 2259 } 2260 2261 late_initcall(atmci_init); /* try to load after dma driver when built-in */ 2262 module_exit(atmci_exit); 2263 2264 MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver"); 2265 MODULE_AUTHOR("Haavard Skinnemoen (Atmel)"); 2266 MODULE_LICENSE("GPL v2"); 2267