1 /* 2 * Atmel MultiMedia Card Interface driver 3 * 4 * Copyright (C) 2004-2008 Atmel Corporation 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License version 2 as 8 * published by the Free Software Foundation. 9 */ 10 #include <linux/blkdev.h> 11 #include <linux/clk.h> 12 #include <linux/debugfs.h> 13 #include <linux/device.h> 14 #include <linux/dmaengine.h> 15 #include <linux/dma-mapping.h> 16 #include <linux/err.h> 17 #include <linux/gpio.h> 18 #include <linux/init.h> 19 #include <linux/interrupt.h> 20 #include <linux/io.h> 21 #include <linux/ioport.h> 22 #include <linux/module.h> 23 #include <linux/of.h> 24 #include <linux/of_device.h> 25 #include <linux/of_gpio.h> 26 #include <linux/platform_device.h> 27 #include <linux/scatterlist.h> 28 #include <linux/seq_file.h> 29 #include <linux/slab.h> 30 #include <linux/stat.h> 31 #include <linux/types.h> 32 #include <linux/platform_data/atmel.h> 33 34 #include <linux/mmc/host.h> 35 #include <linux/mmc/sdio.h> 36 37 #include <mach/atmel-mci.h> 38 #include <linux/atmel-mci.h> 39 #include <linux/atmel_pdc.h> 40 41 #include <asm/cacheflush.h> 42 #include <asm/io.h> 43 #include <asm/unaligned.h> 44 45 #include "atmel-mci-regs.h" 46 47 #define ATMCI_DATA_ERROR_FLAGS (ATMCI_DCRCE | ATMCI_DTOE | ATMCI_OVRE | ATMCI_UNRE) 48 #define ATMCI_DMA_THRESHOLD 16 49 50 enum { 51 EVENT_CMD_RDY = 0, 52 EVENT_XFER_COMPLETE, 53 EVENT_NOTBUSY, 54 EVENT_DATA_ERROR, 55 }; 56 57 enum atmel_mci_state { 58 STATE_IDLE = 0, 59 STATE_SENDING_CMD, 60 STATE_DATA_XFER, 61 STATE_WAITING_NOTBUSY, 62 STATE_SENDING_STOP, 63 STATE_END_REQUEST, 64 }; 65 66 enum atmci_xfer_dir { 67 XFER_RECEIVE = 0, 68 XFER_TRANSMIT, 69 }; 70 71 enum atmci_pdc_buf { 72 PDC_FIRST_BUF = 0, 73 PDC_SECOND_BUF, 74 }; 75 76 struct atmel_mci_caps { 77 bool has_dma_conf_reg; 78 bool has_pdc; 79 bool has_cfg_reg; 80 bool has_cstor_reg; 81 bool has_highspeed; 82 bool has_rwproof; 83 bool has_odd_clk_div; 84 bool has_bad_data_ordering; 85 bool need_reset_after_xfer; 86 bool need_blksz_mul_4; 87 bool need_notbusy_for_read_ops; 88 }; 89 90 struct atmel_mci_dma { 91 struct dma_chan *chan; 92 struct dma_async_tx_descriptor *data_desc; 93 }; 94 95 /** 96 * struct atmel_mci - MMC controller state shared between all slots 97 * @lock: Spinlock protecting the queue and associated data. 98 * @regs: Pointer to MMIO registers. 99 * @sg: Scatterlist entry currently being processed by PIO or PDC code. 100 * @pio_offset: Offset into the current scatterlist entry. 101 * @buffer: Buffer used if we don't have the r/w proof capability. We 102 * don't have the time to switch pdc buffers so we have to use only 103 * one buffer for the full transaction. 104 * @buf_size: size of the buffer. 105 * @phys_buf_addr: buffer address needed for pdc. 106 * @cur_slot: The slot which is currently using the controller. 107 * @mrq: The request currently being processed on @cur_slot, 108 * or NULL if the controller is idle. 109 * @cmd: The command currently being sent to the card, or NULL. 110 * @data: The data currently being transferred, or NULL if no data 111 * transfer is in progress. 112 * @data_size: just data->blocks * data->blksz. 113 * @dma: DMA client state. 114 * @data_chan: DMA channel being used for the current data transfer. 115 * @cmd_status: Snapshot of SR taken upon completion of the current 116 * command. Only valid when EVENT_CMD_COMPLETE is pending. 117 * @data_status: Snapshot of SR taken upon completion of the current 118 * data transfer. Only valid when EVENT_DATA_COMPLETE or 119 * EVENT_DATA_ERROR is pending. 120 * @stop_cmdr: Value to be loaded into CMDR when the stop command is 121 * to be sent. 122 * @tasklet: Tasklet running the request state machine. 123 * @pending_events: Bitmask of events flagged by the interrupt handler 124 * to be processed by the tasklet. 125 * @completed_events: Bitmask of events which the state machine has 126 * processed. 127 * @state: Tasklet state. 128 * @queue: List of slots waiting for access to the controller. 129 * @need_clock_update: Update the clock rate before the next request. 130 * @need_reset: Reset controller before next request. 131 * @timer: Timer to balance the data timeout error flag which cannot rise. 132 * @mode_reg: Value of the MR register. 133 * @cfg_reg: Value of the CFG register. 134 * @bus_hz: The rate of @mck in Hz. This forms the basis for MMC bus 135 * rate and timeout calculations. 136 * @mapbase: Physical address of the MMIO registers. 137 * @mck: The peripheral bus clock hooked up to the MMC controller. 138 * @pdev: Platform device associated with the MMC controller. 139 * @slot: Slots sharing this MMC controller. 140 * @caps: MCI capabilities depending on MCI version. 141 * @prepare_data: function to setup MCI before data transfer which 142 * depends on MCI capabilities. 143 * @submit_data: function to start data transfer which depends on MCI 144 * capabilities. 145 * @stop_transfer: function to stop data transfer which depends on MCI 146 * capabilities. 147 * 148 * Locking 149 * ======= 150 * 151 * @lock is a softirq-safe spinlock protecting @queue as well as 152 * @cur_slot, @mrq and @state. These must always be updated 153 * at the same time while holding @lock. 154 * 155 * @lock also protects mode_reg and need_clock_update since these are 156 * used to synchronize mode register updates with the queue 157 * processing. 158 * 159 * The @mrq field of struct atmel_mci_slot is also protected by @lock, 160 * and must always be written at the same time as the slot is added to 161 * @queue. 162 * 163 * @pending_events and @completed_events are accessed using atomic bit 164 * operations, so they don't need any locking. 165 * 166 * None of the fields touched by the interrupt handler need any 167 * locking. However, ordering is important: Before EVENT_DATA_ERROR or 168 * EVENT_DATA_COMPLETE is set in @pending_events, all data-related 169 * interrupts must be disabled and @data_status updated with a 170 * snapshot of SR. Similarly, before EVENT_CMD_COMPLETE is set, the 171 * CMDRDY interrupt must be disabled and @cmd_status updated with a 172 * snapshot of SR, and before EVENT_XFER_COMPLETE can be set, the 173 * bytes_xfered field of @data must be written. This is ensured by 174 * using barriers. 175 */ 176 struct atmel_mci { 177 spinlock_t lock; 178 void __iomem *regs; 179 180 struct scatterlist *sg; 181 unsigned int sg_len; 182 unsigned int pio_offset; 183 unsigned int *buffer; 184 unsigned int buf_size; 185 dma_addr_t buf_phys_addr; 186 187 struct atmel_mci_slot *cur_slot; 188 struct mmc_request *mrq; 189 struct mmc_command *cmd; 190 struct mmc_data *data; 191 unsigned int data_size; 192 193 struct atmel_mci_dma dma; 194 struct dma_chan *data_chan; 195 struct dma_slave_config dma_conf; 196 197 u32 cmd_status; 198 u32 data_status; 199 u32 stop_cmdr; 200 201 struct tasklet_struct tasklet; 202 unsigned long pending_events; 203 unsigned long completed_events; 204 enum atmel_mci_state state; 205 struct list_head queue; 206 207 bool need_clock_update; 208 bool need_reset; 209 struct timer_list timer; 210 u32 mode_reg; 211 u32 cfg_reg; 212 unsigned long bus_hz; 213 unsigned long mapbase; 214 struct clk *mck; 215 struct platform_device *pdev; 216 217 struct atmel_mci_slot *slot[ATMCI_MAX_NR_SLOTS]; 218 219 struct atmel_mci_caps caps; 220 221 u32 (*prepare_data)(struct atmel_mci *host, struct mmc_data *data); 222 void (*submit_data)(struct atmel_mci *host, struct mmc_data *data); 223 void (*stop_transfer)(struct atmel_mci *host); 224 }; 225 226 /** 227 * struct atmel_mci_slot - MMC slot state 228 * @mmc: The mmc_host representing this slot. 229 * @host: The MMC controller this slot is using. 230 * @sdc_reg: Value of SDCR to be written before using this slot. 231 * @sdio_irq: SDIO irq mask for this slot. 232 * @mrq: mmc_request currently being processed or waiting to be 233 * processed, or NULL when the slot is idle. 234 * @queue_node: List node for placing this node in the @queue list of 235 * &struct atmel_mci. 236 * @clock: Clock rate configured by set_ios(). Protected by host->lock. 237 * @flags: Random state bits associated with the slot. 238 * @detect_pin: GPIO pin used for card detection, or negative if not 239 * available. 240 * @wp_pin: GPIO pin used for card write protect sending, or negative 241 * if not available. 242 * @detect_is_active_high: The state of the detect pin when it is active. 243 * @detect_timer: Timer used for debouncing @detect_pin interrupts. 244 */ 245 struct atmel_mci_slot { 246 struct mmc_host *mmc; 247 struct atmel_mci *host; 248 249 u32 sdc_reg; 250 u32 sdio_irq; 251 252 struct mmc_request *mrq; 253 struct list_head queue_node; 254 255 unsigned int clock; 256 unsigned long flags; 257 #define ATMCI_CARD_PRESENT 0 258 #define ATMCI_CARD_NEED_INIT 1 259 #define ATMCI_SHUTDOWN 2 260 261 int detect_pin; 262 int wp_pin; 263 bool detect_is_active_high; 264 265 struct timer_list detect_timer; 266 }; 267 268 #define atmci_test_and_clear_pending(host, event) \ 269 test_and_clear_bit(event, &host->pending_events) 270 #define atmci_set_completed(host, event) \ 271 set_bit(event, &host->completed_events) 272 #define atmci_set_pending(host, event) \ 273 set_bit(event, &host->pending_events) 274 275 /* 276 * The debugfs stuff below is mostly optimized away when 277 * CONFIG_DEBUG_FS is not set. 278 */ 279 static int atmci_req_show(struct seq_file *s, void *v) 280 { 281 struct atmel_mci_slot *slot = s->private; 282 struct mmc_request *mrq; 283 struct mmc_command *cmd; 284 struct mmc_command *stop; 285 struct mmc_data *data; 286 287 /* Make sure we get a consistent snapshot */ 288 spin_lock_bh(&slot->host->lock); 289 mrq = slot->mrq; 290 291 if (mrq) { 292 cmd = mrq->cmd; 293 data = mrq->data; 294 stop = mrq->stop; 295 296 if (cmd) 297 seq_printf(s, 298 "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n", 299 cmd->opcode, cmd->arg, cmd->flags, 300 cmd->resp[0], cmd->resp[1], cmd->resp[2], 301 cmd->resp[3], cmd->error); 302 if (data) 303 seq_printf(s, "DATA %u / %u * %u flg %x err %d\n", 304 data->bytes_xfered, data->blocks, 305 data->blksz, data->flags, data->error); 306 if (stop) 307 seq_printf(s, 308 "CMD%u(0x%x) flg %x rsp %x %x %x %x err %d\n", 309 stop->opcode, stop->arg, stop->flags, 310 stop->resp[0], stop->resp[1], stop->resp[2], 311 stop->resp[3], stop->error); 312 } 313 314 spin_unlock_bh(&slot->host->lock); 315 316 return 0; 317 } 318 319 static int atmci_req_open(struct inode *inode, struct file *file) 320 { 321 return single_open(file, atmci_req_show, inode->i_private); 322 } 323 324 static const struct file_operations atmci_req_fops = { 325 .owner = THIS_MODULE, 326 .open = atmci_req_open, 327 .read = seq_read, 328 .llseek = seq_lseek, 329 .release = single_release, 330 }; 331 332 static void atmci_show_status_reg(struct seq_file *s, 333 const char *regname, u32 value) 334 { 335 static const char *sr_bit[] = { 336 [0] = "CMDRDY", 337 [1] = "RXRDY", 338 [2] = "TXRDY", 339 [3] = "BLKE", 340 [4] = "DTIP", 341 [5] = "NOTBUSY", 342 [6] = "ENDRX", 343 [7] = "ENDTX", 344 [8] = "SDIOIRQA", 345 [9] = "SDIOIRQB", 346 [12] = "SDIOWAIT", 347 [14] = "RXBUFF", 348 [15] = "TXBUFE", 349 [16] = "RINDE", 350 [17] = "RDIRE", 351 [18] = "RCRCE", 352 [19] = "RENDE", 353 [20] = "RTOE", 354 [21] = "DCRCE", 355 [22] = "DTOE", 356 [23] = "CSTOE", 357 [24] = "BLKOVRE", 358 [25] = "DMADONE", 359 [26] = "FIFOEMPTY", 360 [27] = "XFRDONE", 361 [30] = "OVRE", 362 [31] = "UNRE", 363 }; 364 unsigned int i; 365 366 seq_printf(s, "%s:\t0x%08x", regname, value); 367 for (i = 0; i < ARRAY_SIZE(sr_bit); i++) { 368 if (value & (1 << i)) { 369 if (sr_bit[i]) 370 seq_printf(s, " %s", sr_bit[i]); 371 else 372 seq_puts(s, " UNKNOWN"); 373 } 374 } 375 seq_putc(s, '\n'); 376 } 377 378 static int atmci_regs_show(struct seq_file *s, void *v) 379 { 380 struct atmel_mci *host = s->private; 381 u32 *buf; 382 int ret = 0; 383 384 385 buf = kmalloc(ATMCI_REGS_SIZE, GFP_KERNEL); 386 if (!buf) 387 return -ENOMEM; 388 389 /* 390 * Grab a more or less consistent snapshot. Note that we're 391 * not disabling interrupts, so IMR and SR may not be 392 * consistent. 393 */ 394 ret = clk_prepare_enable(host->mck); 395 if (ret) 396 goto out; 397 398 spin_lock_bh(&host->lock); 399 memcpy_fromio(buf, host->regs, ATMCI_REGS_SIZE); 400 spin_unlock_bh(&host->lock); 401 402 clk_disable_unprepare(host->mck); 403 404 seq_printf(s, "MR:\t0x%08x%s%s ", 405 buf[ATMCI_MR / 4], 406 buf[ATMCI_MR / 4] & ATMCI_MR_RDPROOF ? " RDPROOF" : "", 407 buf[ATMCI_MR / 4] & ATMCI_MR_WRPROOF ? " WRPROOF" : ""); 408 if (host->caps.has_odd_clk_div) 409 seq_printf(s, "{CLKDIV,CLKODD}=%u\n", 410 ((buf[ATMCI_MR / 4] & 0xff) << 1) 411 | ((buf[ATMCI_MR / 4] >> 16) & 1)); 412 else 413 seq_printf(s, "CLKDIV=%u\n", 414 (buf[ATMCI_MR / 4] & 0xff)); 415 seq_printf(s, "DTOR:\t0x%08x\n", buf[ATMCI_DTOR / 4]); 416 seq_printf(s, "SDCR:\t0x%08x\n", buf[ATMCI_SDCR / 4]); 417 seq_printf(s, "ARGR:\t0x%08x\n", buf[ATMCI_ARGR / 4]); 418 seq_printf(s, "BLKR:\t0x%08x BCNT=%u BLKLEN=%u\n", 419 buf[ATMCI_BLKR / 4], 420 buf[ATMCI_BLKR / 4] & 0xffff, 421 (buf[ATMCI_BLKR / 4] >> 16) & 0xffff); 422 if (host->caps.has_cstor_reg) 423 seq_printf(s, "CSTOR:\t0x%08x\n", buf[ATMCI_CSTOR / 4]); 424 425 /* Don't read RSPR and RDR; it will consume the data there */ 426 427 atmci_show_status_reg(s, "SR", buf[ATMCI_SR / 4]); 428 atmci_show_status_reg(s, "IMR", buf[ATMCI_IMR / 4]); 429 430 if (host->caps.has_dma_conf_reg) { 431 u32 val; 432 433 val = buf[ATMCI_DMA / 4]; 434 seq_printf(s, "DMA:\t0x%08x OFFSET=%u CHKSIZE=%u%s\n", 435 val, val & 3, 436 ((val >> 4) & 3) ? 437 1 << (((val >> 4) & 3) + 1) : 1, 438 val & ATMCI_DMAEN ? " DMAEN" : ""); 439 } 440 if (host->caps.has_cfg_reg) { 441 u32 val; 442 443 val = buf[ATMCI_CFG / 4]; 444 seq_printf(s, "CFG:\t0x%08x%s%s%s%s\n", 445 val, 446 val & ATMCI_CFG_FIFOMODE_1DATA ? " FIFOMODE_ONE_DATA" : "", 447 val & ATMCI_CFG_FERRCTRL_COR ? " FERRCTRL_CLEAR_ON_READ" : "", 448 val & ATMCI_CFG_HSMODE ? " HSMODE" : "", 449 val & ATMCI_CFG_LSYNC ? " LSYNC" : ""); 450 } 451 452 out: 453 kfree(buf); 454 455 return ret; 456 } 457 458 static int atmci_regs_open(struct inode *inode, struct file *file) 459 { 460 return single_open(file, atmci_regs_show, inode->i_private); 461 } 462 463 static const struct file_operations atmci_regs_fops = { 464 .owner = THIS_MODULE, 465 .open = atmci_regs_open, 466 .read = seq_read, 467 .llseek = seq_lseek, 468 .release = single_release, 469 }; 470 471 static void atmci_init_debugfs(struct atmel_mci_slot *slot) 472 { 473 struct mmc_host *mmc = slot->mmc; 474 struct atmel_mci *host = slot->host; 475 struct dentry *root; 476 struct dentry *node; 477 478 root = mmc->debugfs_root; 479 if (!root) 480 return; 481 482 node = debugfs_create_file("regs", S_IRUSR, root, host, 483 &atmci_regs_fops); 484 if (IS_ERR(node)) 485 return; 486 if (!node) 487 goto err; 488 489 node = debugfs_create_file("req", S_IRUSR, root, slot, &atmci_req_fops); 490 if (!node) 491 goto err; 492 493 node = debugfs_create_u32("state", S_IRUSR, root, (u32 *)&host->state); 494 if (!node) 495 goto err; 496 497 node = debugfs_create_x32("pending_events", S_IRUSR, root, 498 (u32 *)&host->pending_events); 499 if (!node) 500 goto err; 501 502 node = debugfs_create_x32("completed_events", S_IRUSR, root, 503 (u32 *)&host->completed_events); 504 if (!node) 505 goto err; 506 507 return; 508 509 err: 510 dev_err(&mmc->class_dev, "failed to initialize debugfs for slot\n"); 511 } 512 513 #if defined(CONFIG_OF) 514 static const struct of_device_id atmci_dt_ids[] = { 515 { .compatible = "atmel,hsmci" }, 516 { /* sentinel */ } 517 }; 518 519 MODULE_DEVICE_TABLE(of, atmci_dt_ids); 520 521 static struct mci_platform_data* 522 atmci_of_init(struct platform_device *pdev) 523 { 524 struct device_node *np = pdev->dev.of_node; 525 struct device_node *cnp; 526 struct mci_platform_data *pdata; 527 u32 slot_id; 528 529 if (!np) { 530 dev_err(&pdev->dev, "device node not found\n"); 531 return ERR_PTR(-EINVAL); 532 } 533 534 pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL); 535 if (!pdata) { 536 dev_err(&pdev->dev, "could not allocate memory for pdata\n"); 537 return ERR_PTR(-ENOMEM); 538 } 539 540 for_each_child_of_node(np, cnp) { 541 if (of_property_read_u32(cnp, "reg", &slot_id)) { 542 dev_warn(&pdev->dev, "reg property is missing for %s\n", 543 cnp->full_name); 544 continue; 545 } 546 547 if (slot_id >= ATMCI_MAX_NR_SLOTS) { 548 dev_warn(&pdev->dev, "can't have more than %d slots\n", 549 ATMCI_MAX_NR_SLOTS); 550 break; 551 } 552 553 if (of_property_read_u32(cnp, "bus-width", 554 &pdata->slot[slot_id].bus_width)) 555 pdata->slot[slot_id].bus_width = 1; 556 557 pdata->slot[slot_id].detect_pin = 558 of_get_named_gpio(cnp, "cd-gpios", 0); 559 560 pdata->slot[slot_id].detect_is_active_high = 561 of_property_read_bool(cnp, "cd-inverted"); 562 563 pdata->slot[slot_id].wp_pin = 564 of_get_named_gpio(cnp, "wp-gpios", 0); 565 } 566 567 return pdata; 568 } 569 #else /* CONFIG_OF */ 570 static inline struct mci_platform_data* 571 atmci_of_init(struct platform_device *dev) 572 { 573 return ERR_PTR(-EINVAL); 574 } 575 #endif 576 577 static inline unsigned int atmci_get_version(struct atmel_mci *host) 578 { 579 return atmci_readl(host, ATMCI_VERSION) & 0x00000fff; 580 } 581 582 static void atmci_timeout_timer(unsigned long data) 583 { 584 struct atmel_mci *host; 585 586 host = (struct atmel_mci *)data; 587 588 dev_dbg(&host->pdev->dev, "software timeout\n"); 589 590 if (host->mrq->cmd->data) { 591 host->mrq->cmd->data->error = -ETIMEDOUT; 592 host->data = NULL; 593 /* 594 * With some SDIO modules, sometimes DMA transfer hangs. If 595 * stop_transfer() is not called then the DMA request is not 596 * removed, following ones are queued and never computed. 597 */ 598 if (host->state == STATE_DATA_XFER) 599 host->stop_transfer(host); 600 } else { 601 host->mrq->cmd->error = -ETIMEDOUT; 602 host->cmd = NULL; 603 } 604 host->need_reset = 1; 605 host->state = STATE_END_REQUEST; 606 smp_wmb(); 607 tasklet_schedule(&host->tasklet); 608 } 609 610 static inline unsigned int atmci_ns_to_clocks(struct atmel_mci *host, 611 unsigned int ns) 612 { 613 /* 614 * It is easier here to use us instead of ns for the timeout, 615 * it prevents from overflows during calculation. 616 */ 617 unsigned int us = DIV_ROUND_UP(ns, 1000); 618 619 /* Maximum clock frequency is host->bus_hz/2 */ 620 return us * (DIV_ROUND_UP(host->bus_hz, 2000000)); 621 } 622 623 static void atmci_set_timeout(struct atmel_mci *host, 624 struct atmel_mci_slot *slot, struct mmc_data *data) 625 { 626 static unsigned dtomul_to_shift[] = { 627 0, 4, 7, 8, 10, 12, 16, 20 628 }; 629 unsigned timeout; 630 unsigned dtocyc; 631 unsigned dtomul; 632 633 timeout = atmci_ns_to_clocks(host, data->timeout_ns) 634 + data->timeout_clks; 635 636 for (dtomul = 0; dtomul < 8; dtomul++) { 637 unsigned shift = dtomul_to_shift[dtomul]; 638 dtocyc = (timeout + (1 << shift) - 1) >> shift; 639 if (dtocyc < 15) 640 break; 641 } 642 643 if (dtomul >= 8) { 644 dtomul = 7; 645 dtocyc = 15; 646 } 647 648 dev_vdbg(&slot->mmc->class_dev, "setting timeout to %u cycles\n", 649 dtocyc << dtomul_to_shift[dtomul]); 650 atmci_writel(host, ATMCI_DTOR, (ATMCI_DTOMUL(dtomul) | ATMCI_DTOCYC(dtocyc))); 651 } 652 653 /* 654 * Return mask with command flags to be enabled for this command. 655 */ 656 static u32 atmci_prepare_command(struct mmc_host *mmc, 657 struct mmc_command *cmd) 658 { 659 struct mmc_data *data; 660 u32 cmdr; 661 662 cmd->error = -EINPROGRESS; 663 664 cmdr = ATMCI_CMDR_CMDNB(cmd->opcode); 665 666 if (cmd->flags & MMC_RSP_PRESENT) { 667 if (cmd->flags & MMC_RSP_136) 668 cmdr |= ATMCI_CMDR_RSPTYP_136BIT; 669 else 670 cmdr |= ATMCI_CMDR_RSPTYP_48BIT; 671 } 672 673 /* 674 * This should really be MAXLAT_5 for CMD2 and ACMD41, but 675 * it's too difficult to determine whether this is an ACMD or 676 * not. Better make it 64. 677 */ 678 cmdr |= ATMCI_CMDR_MAXLAT_64CYC; 679 680 if (mmc->ios.bus_mode == MMC_BUSMODE_OPENDRAIN) 681 cmdr |= ATMCI_CMDR_OPDCMD; 682 683 data = cmd->data; 684 if (data) { 685 cmdr |= ATMCI_CMDR_START_XFER; 686 687 if (cmd->opcode == SD_IO_RW_EXTENDED) { 688 cmdr |= ATMCI_CMDR_SDIO_BLOCK; 689 } else { 690 if (data->flags & MMC_DATA_STREAM) 691 cmdr |= ATMCI_CMDR_STREAM; 692 else if (data->blocks > 1) 693 cmdr |= ATMCI_CMDR_MULTI_BLOCK; 694 else 695 cmdr |= ATMCI_CMDR_BLOCK; 696 } 697 698 if (data->flags & MMC_DATA_READ) 699 cmdr |= ATMCI_CMDR_TRDIR_READ; 700 } 701 702 return cmdr; 703 } 704 705 static void atmci_send_command(struct atmel_mci *host, 706 struct mmc_command *cmd, u32 cmd_flags) 707 { 708 WARN_ON(host->cmd); 709 host->cmd = cmd; 710 711 dev_vdbg(&host->pdev->dev, 712 "start command: ARGR=0x%08x CMDR=0x%08x\n", 713 cmd->arg, cmd_flags); 714 715 atmci_writel(host, ATMCI_ARGR, cmd->arg); 716 atmci_writel(host, ATMCI_CMDR, cmd_flags); 717 } 718 719 static void atmci_send_stop_cmd(struct atmel_mci *host, struct mmc_data *data) 720 { 721 dev_dbg(&host->pdev->dev, "send stop command\n"); 722 atmci_send_command(host, data->stop, host->stop_cmdr); 723 atmci_writel(host, ATMCI_IER, ATMCI_CMDRDY); 724 } 725 726 /* 727 * Configure given PDC buffer taking care of alignement issues. 728 * Update host->data_size and host->sg. 729 */ 730 static void atmci_pdc_set_single_buf(struct atmel_mci *host, 731 enum atmci_xfer_dir dir, enum atmci_pdc_buf buf_nb) 732 { 733 u32 pointer_reg, counter_reg; 734 unsigned int buf_size; 735 736 if (dir == XFER_RECEIVE) { 737 pointer_reg = ATMEL_PDC_RPR; 738 counter_reg = ATMEL_PDC_RCR; 739 } else { 740 pointer_reg = ATMEL_PDC_TPR; 741 counter_reg = ATMEL_PDC_TCR; 742 } 743 744 if (buf_nb == PDC_SECOND_BUF) { 745 pointer_reg += ATMEL_PDC_SCND_BUF_OFF; 746 counter_reg += ATMEL_PDC_SCND_BUF_OFF; 747 } 748 749 if (!host->caps.has_rwproof) { 750 buf_size = host->buf_size; 751 atmci_writel(host, pointer_reg, host->buf_phys_addr); 752 } else { 753 buf_size = sg_dma_len(host->sg); 754 atmci_writel(host, pointer_reg, sg_dma_address(host->sg)); 755 } 756 757 if (host->data_size <= buf_size) { 758 if (host->data_size & 0x3) { 759 /* If size is different from modulo 4, transfer bytes */ 760 atmci_writel(host, counter_reg, host->data_size); 761 atmci_writel(host, ATMCI_MR, host->mode_reg | ATMCI_MR_PDCFBYTE); 762 } else { 763 /* Else transfer 32-bits words */ 764 atmci_writel(host, counter_reg, host->data_size / 4); 765 } 766 host->data_size = 0; 767 } else { 768 /* We assume the size of a page is 32-bits aligned */ 769 atmci_writel(host, counter_reg, sg_dma_len(host->sg) / 4); 770 host->data_size -= sg_dma_len(host->sg); 771 if (host->data_size) 772 host->sg = sg_next(host->sg); 773 } 774 } 775 776 /* 777 * Configure PDC buffer according to the data size ie configuring one or two 778 * buffers. Don't use this function if you want to configure only the second 779 * buffer. In this case, use atmci_pdc_set_single_buf. 780 */ 781 static void atmci_pdc_set_both_buf(struct atmel_mci *host, int dir) 782 { 783 atmci_pdc_set_single_buf(host, dir, PDC_FIRST_BUF); 784 if (host->data_size) 785 atmci_pdc_set_single_buf(host, dir, PDC_SECOND_BUF); 786 } 787 788 /* 789 * Unmap sg lists, called when transfer is finished. 790 */ 791 static void atmci_pdc_cleanup(struct atmel_mci *host) 792 { 793 struct mmc_data *data = host->data; 794 795 if (data) 796 dma_unmap_sg(&host->pdev->dev, 797 data->sg, data->sg_len, 798 ((data->flags & MMC_DATA_WRITE) 799 ? DMA_TO_DEVICE : DMA_FROM_DEVICE)); 800 } 801 802 /* 803 * Disable PDC transfers. Update pending flags to EVENT_XFER_COMPLETE after 804 * having received ATMCI_TXBUFE or ATMCI_RXBUFF interrupt. Enable ATMCI_NOTBUSY 805 * interrupt needed for both transfer directions. 806 */ 807 static void atmci_pdc_complete(struct atmel_mci *host) 808 { 809 int transfer_size = host->data->blocks * host->data->blksz; 810 int i; 811 812 atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); 813 814 if ((!host->caps.has_rwproof) 815 && (host->data->flags & MMC_DATA_READ)) { 816 if (host->caps.has_bad_data_ordering) 817 for (i = 0; i < transfer_size; i++) 818 host->buffer[i] = swab32(host->buffer[i]); 819 sg_copy_from_buffer(host->data->sg, host->data->sg_len, 820 host->buffer, transfer_size); 821 } 822 823 atmci_pdc_cleanup(host); 824 825 dev_dbg(&host->pdev->dev, "(%s) set pending xfer complete\n", __func__); 826 atmci_set_pending(host, EVENT_XFER_COMPLETE); 827 tasklet_schedule(&host->tasklet); 828 } 829 830 static void atmci_dma_cleanup(struct atmel_mci *host) 831 { 832 struct mmc_data *data = host->data; 833 834 if (data) 835 dma_unmap_sg(host->dma.chan->device->dev, 836 data->sg, data->sg_len, 837 ((data->flags & MMC_DATA_WRITE) 838 ? DMA_TO_DEVICE : DMA_FROM_DEVICE)); 839 } 840 841 /* 842 * This function is called by the DMA driver from tasklet context. 843 */ 844 static void atmci_dma_complete(void *arg) 845 { 846 struct atmel_mci *host = arg; 847 struct mmc_data *data = host->data; 848 849 dev_vdbg(&host->pdev->dev, "DMA complete\n"); 850 851 if (host->caps.has_dma_conf_reg) 852 /* Disable DMA hardware handshaking on MCI */ 853 atmci_writel(host, ATMCI_DMA, atmci_readl(host, ATMCI_DMA) & ~ATMCI_DMAEN); 854 855 atmci_dma_cleanup(host); 856 857 /* 858 * If the card was removed, data will be NULL. No point trying 859 * to send the stop command or waiting for NBUSY in this case. 860 */ 861 if (data) { 862 dev_dbg(&host->pdev->dev, 863 "(%s) set pending xfer complete\n", __func__); 864 atmci_set_pending(host, EVENT_XFER_COMPLETE); 865 tasklet_schedule(&host->tasklet); 866 867 /* 868 * Regardless of what the documentation says, we have 869 * to wait for NOTBUSY even after block read 870 * operations. 871 * 872 * When the DMA transfer is complete, the controller 873 * may still be reading the CRC from the card, i.e. 874 * the data transfer is still in progress and we 875 * haven't seen all the potential error bits yet. 876 * 877 * The interrupt handler will schedule a different 878 * tasklet to finish things up when the data transfer 879 * is completely done. 880 * 881 * We may not complete the mmc request here anyway 882 * because the mmc layer may call back and cause us to 883 * violate the "don't submit new operations from the 884 * completion callback" rule of the dma engine 885 * framework. 886 */ 887 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); 888 } 889 } 890 891 /* 892 * Returns a mask of interrupt flags to be enabled after the whole 893 * request has been prepared. 894 */ 895 static u32 atmci_prepare_data(struct atmel_mci *host, struct mmc_data *data) 896 { 897 u32 iflags; 898 899 data->error = -EINPROGRESS; 900 901 host->sg = data->sg; 902 host->sg_len = data->sg_len; 903 host->data = data; 904 host->data_chan = NULL; 905 906 iflags = ATMCI_DATA_ERROR_FLAGS; 907 908 /* 909 * Errata: MMC data write operation with less than 12 910 * bytes is impossible. 911 * 912 * Errata: MCI Transmit Data Register (TDR) FIFO 913 * corruption when length is not multiple of 4. 914 */ 915 if (data->blocks * data->blksz < 12 916 || (data->blocks * data->blksz) & 3) 917 host->need_reset = true; 918 919 host->pio_offset = 0; 920 if (data->flags & MMC_DATA_READ) 921 iflags |= ATMCI_RXRDY; 922 else 923 iflags |= ATMCI_TXRDY; 924 925 return iflags; 926 } 927 928 /* 929 * Set interrupt flags and set block length into the MCI mode register even 930 * if this value is also accessible in the MCI block register. It seems to be 931 * necessary before the High Speed MCI version. It also map sg and configure 932 * PDC registers. 933 */ 934 static u32 935 atmci_prepare_data_pdc(struct atmel_mci *host, struct mmc_data *data) 936 { 937 u32 iflags, tmp; 938 unsigned int sg_len; 939 enum dma_data_direction dir; 940 int i; 941 942 data->error = -EINPROGRESS; 943 944 host->data = data; 945 host->sg = data->sg; 946 iflags = ATMCI_DATA_ERROR_FLAGS; 947 948 /* Enable pdc mode */ 949 atmci_writel(host, ATMCI_MR, host->mode_reg | ATMCI_MR_PDCMODE); 950 951 if (data->flags & MMC_DATA_READ) { 952 dir = DMA_FROM_DEVICE; 953 iflags |= ATMCI_ENDRX | ATMCI_RXBUFF; 954 } else { 955 dir = DMA_TO_DEVICE; 956 iflags |= ATMCI_ENDTX | ATMCI_TXBUFE | ATMCI_BLKE; 957 } 958 959 /* Set BLKLEN */ 960 tmp = atmci_readl(host, ATMCI_MR); 961 tmp &= 0x0000ffff; 962 tmp |= ATMCI_BLKLEN(data->blksz); 963 atmci_writel(host, ATMCI_MR, tmp); 964 965 /* Configure PDC */ 966 host->data_size = data->blocks * data->blksz; 967 sg_len = dma_map_sg(&host->pdev->dev, data->sg, data->sg_len, dir); 968 969 if ((!host->caps.has_rwproof) 970 && (host->data->flags & MMC_DATA_WRITE)) { 971 sg_copy_to_buffer(host->data->sg, host->data->sg_len, 972 host->buffer, host->data_size); 973 if (host->caps.has_bad_data_ordering) 974 for (i = 0; i < host->data_size; i++) 975 host->buffer[i] = swab32(host->buffer[i]); 976 } 977 978 if (host->data_size) 979 atmci_pdc_set_both_buf(host, 980 ((dir == DMA_FROM_DEVICE) ? XFER_RECEIVE : XFER_TRANSMIT)); 981 982 return iflags; 983 } 984 985 static u32 986 atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) 987 { 988 struct dma_chan *chan; 989 struct dma_async_tx_descriptor *desc; 990 struct scatterlist *sg; 991 unsigned int i; 992 enum dma_data_direction direction; 993 enum dma_transfer_direction slave_dirn; 994 unsigned int sglen; 995 u32 maxburst; 996 u32 iflags; 997 998 data->error = -EINPROGRESS; 999 1000 WARN_ON(host->data); 1001 host->sg = NULL; 1002 host->data = data; 1003 1004 iflags = ATMCI_DATA_ERROR_FLAGS; 1005 1006 /* 1007 * We don't do DMA on "complex" transfers, i.e. with 1008 * non-word-aligned buffers or lengths. Also, we don't bother 1009 * with all the DMA setup overhead for short transfers. 1010 */ 1011 if (data->blocks * data->blksz < ATMCI_DMA_THRESHOLD) 1012 return atmci_prepare_data(host, data); 1013 if (data->blksz & 3) 1014 return atmci_prepare_data(host, data); 1015 1016 for_each_sg(data->sg, sg, data->sg_len, i) { 1017 if (sg->offset & 3 || sg->length & 3) 1018 return atmci_prepare_data(host, data); 1019 } 1020 1021 /* If we don't have a channel, we can't do DMA */ 1022 chan = host->dma.chan; 1023 if (chan) 1024 host->data_chan = chan; 1025 1026 if (!chan) 1027 return -ENODEV; 1028 1029 if (data->flags & MMC_DATA_READ) { 1030 direction = DMA_FROM_DEVICE; 1031 host->dma_conf.direction = slave_dirn = DMA_DEV_TO_MEM; 1032 maxburst = atmci_convert_chksize(host->dma_conf.src_maxburst); 1033 } else { 1034 direction = DMA_TO_DEVICE; 1035 host->dma_conf.direction = slave_dirn = DMA_MEM_TO_DEV; 1036 maxburst = atmci_convert_chksize(host->dma_conf.dst_maxburst); 1037 } 1038 1039 if (host->caps.has_dma_conf_reg) 1040 atmci_writel(host, ATMCI_DMA, ATMCI_DMA_CHKSIZE(maxburst) | 1041 ATMCI_DMAEN); 1042 1043 sglen = dma_map_sg(chan->device->dev, data->sg, 1044 data->sg_len, direction); 1045 1046 dmaengine_slave_config(chan, &host->dma_conf); 1047 desc = dmaengine_prep_slave_sg(chan, 1048 data->sg, sglen, slave_dirn, 1049 DMA_PREP_INTERRUPT | DMA_CTRL_ACK); 1050 if (!desc) 1051 goto unmap_exit; 1052 1053 host->dma.data_desc = desc; 1054 desc->callback = atmci_dma_complete; 1055 desc->callback_param = host; 1056 1057 return iflags; 1058 unmap_exit: 1059 dma_unmap_sg(chan->device->dev, data->sg, data->sg_len, direction); 1060 return -ENOMEM; 1061 } 1062 1063 static void 1064 atmci_submit_data(struct atmel_mci *host, struct mmc_data *data) 1065 { 1066 return; 1067 } 1068 1069 /* 1070 * Start PDC according to transfer direction. 1071 */ 1072 static void 1073 atmci_submit_data_pdc(struct atmel_mci *host, struct mmc_data *data) 1074 { 1075 if (data->flags & MMC_DATA_READ) 1076 atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTEN); 1077 else 1078 atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_TXTEN); 1079 } 1080 1081 static void 1082 atmci_submit_data_dma(struct atmel_mci *host, struct mmc_data *data) 1083 { 1084 struct dma_chan *chan = host->data_chan; 1085 struct dma_async_tx_descriptor *desc = host->dma.data_desc; 1086 1087 if (chan) { 1088 dmaengine_submit(desc); 1089 dma_async_issue_pending(chan); 1090 } 1091 } 1092 1093 static void atmci_stop_transfer(struct atmel_mci *host) 1094 { 1095 dev_dbg(&host->pdev->dev, 1096 "(%s) set pending xfer complete\n", __func__); 1097 atmci_set_pending(host, EVENT_XFER_COMPLETE); 1098 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); 1099 } 1100 1101 /* 1102 * Stop data transfer because error(s) occurred. 1103 */ 1104 static void atmci_stop_transfer_pdc(struct atmel_mci *host) 1105 { 1106 atmci_writel(host, ATMEL_PDC_PTCR, ATMEL_PDC_RXTDIS | ATMEL_PDC_TXTDIS); 1107 } 1108 1109 static void atmci_stop_transfer_dma(struct atmel_mci *host) 1110 { 1111 struct dma_chan *chan = host->data_chan; 1112 1113 if (chan) { 1114 dmaengine_terminate_all(chan); 1115 atmci_dma_cleanup(host); 1116 } else { 1117 /* Data transfer was stopped by the interrupt handler */ 1118 dev_dbg(&host->pdev->dev, 1119 "(%s) set pending xfer complete\n", __func__); 1120 atmci_set_pending(host, EVENT_XFER_COMPLETE); 1121 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); 1122 } 1123 } 1124 1125 /* 1126 * Start a request: prepare data if needed, prepare the command and activate 1127 * interrupts. 1128 */ 1129 static void atmci_start_request(struct atmel_mci *host, 1130 struct atmel_mci_slot *slot) 1131 { 1132 struct mmc_request *mrq; 1133 struct mmc_command *cmd; 1134 struct mmc_data *data; 1135 u32 iflags; 1136 u32 cmdflags; 1137 1138 mrq = slot->mrq; 1139 host->cur_slot = slot; 1140 host->mrq = mrq; 1141 1142 host->pending_events = 0; 1143 host->completed_events = 0; 1144 host->cmd_status = 0; 1145 host->data_status = 0; 1146 1147 dev_dbg(&host->pdev->dev, "start request: cmd %u\n", mrq->cmd->opcode); 1148 1149 if (host->need_reset || host->caps.need_reset_after_xfer) { 1150 iflags = atmci_readl(host, ATMCI_IMR); 1151 iflags &= (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB); 1152 atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST); 1153 atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN); 1154 atmci_writel(host, ATMCI_MR, host->mode_reg); 1155 if (host->caps.has_cfg_reg) 1156 atmci_writel(host, ATMCI_CFG, host->cfg_reg); 1157 atmci_writel(host, ATMCI_IER, iflags); 1158 host->need_reset = false; 1159 } 1160 atmci_writel(host, ATMCI_SDCR, slot->sdc_reg); 1161 1162 iflags = atmci_readl(host, ATMCI_IMR); 1163 if (iflags & ~(ATMCI_SDIOIRQA | ATMCI_SDIOIRQB)) 1164 dev_dbg(&slot->mmc->class_dev, "WARNING: IMR=0x%08x\n", 1165 iflags); 1166 1167 if (unlikely(test_and_clear_bit(ATMCI_CARD_NEED_INIT, &slot->flags))) { 1168 /* Send init sequence (74 clock cycles) */ 1169 atmci_writel(host, ATMCI_CMDR, ATMCI_CMDR_SPCMD_INIT); 1170 while (!(atmci_readl(host, ATMCI_SR) & ATMCI_CMDRDY)) 1171 cpu_relax(); 1172 } 1173 iflags = 0; 1174 data = mrq->data; 1175 if (data) { 1176 atmci_set_timeout(host, slot, data); 1177 1178 /* Must set block count/size before sending command */ 1179 atmci_writel(host, ATMCI_BLKR, ATMCI_BCNT(data->blocks) 1180 | ATMCI_BLKLEN(data->blksz)); 1181 dev_vdbg(&slot->mmc->class_dev, "BLKR=0x%08x\n", 1182 ATMCI_BCNT(data->blocks) | ATMCI_BLKLEN(data->blksz)); 1183 1184 iflags |= host->prepare_data(host, data); 1185 } 1186 1187 iflags |= ATMCI_CMDRDY; 1188 cmd = mrq->cmd; 1189 cmdflags = atmci_prepare_command(slot->mmc, cmd); 1190 1191 /* 1192 * DMA transfer should be started before sending the command to avoid 1193 * unexpected errors especially for read operations in SDIO mode. 1194 * Unfortunately, in PDC mode, command has to be sent before starting 1195 * the transfer. 1196 */ 1197 if (host->submit_data != &atmci_submit_data_dma) 1198 atmci_send_command(host, cmd, cmdflags); 1199 1200 if (data) 1201 host->submit_data(host, data); 1202 1203 if (host->submit_data == &atmci_submit_data_dma) 1204 atmci_send_command(host, cmd, cmdflags); 1205 1206 if (mrq->stop) { 1207 host->stop_cmdr = atmci_prepare_command(slot->mmc, mrq->stop); 1208 host->stop_cmdr |= ATMCI_CMDR_STOP_XFER; 1209 if (!(data->flags & MMC_DATA_WRITE)) 1210 host->stop_cmdr |= ATMCI_CMDR_TRDIR_READ; 1211 if (data->flags & MMC_DATA_STREAM) 1212 host->stop_cmdr |= ATMCI_CMDR_STREAM; 1213 else 1214 host->stop_cmdr |= ATMCI_CMDR_MULTI_BLOCK; 1215 } 1216 1217 /* 1218 * We could have enabled interrupts earlier, but I suspect 1219 * that would open up a nice can of interesting race 1220 * conditions (e.g. command and data complete, but stop not 1221 * prepared yet.) 1222 */ 1223 atmci_writel(host, ATMCI_IER, iflags); 1224 1225 mod_timer(&host->timer, jiffies + msecs_to_jiffies(2000)); 1226 } 1227 1228 static void atmci_queue_request(struct atmel_mci *host, 1229 struct atmel_mci_slot *slot, struct mmc_request *mrq) 1230 { 1231 dev_vdbg(&slot->mmc->class_dev, "queue request: state=%d\n", 1232 host->state); 1233 1234 spin_lock_bh(&host->lock); 1235 slot->mrq = mrq; 1236 if (host->state == STATE_IDLE) { 1237 host->state = STATE_SENDING_CMD; 1238 atmci_start_request(host, slot); 1239 } else { 1240 dev_dbg(&host->pdev->dev, "queue request\n"); 1241 list_add_tail(&slot->queue_node, &host->queue); 1242 } 1243 spin_unlock_bh(&host->lock); 1244 } 1245 1246 static void atmci_request(struct mmc_host *mmc, struct mmc_request *mrq) 1247 { 1248 struct atmel_mci_slot *slot = mmc_priv(mmc); 1249 struct atmel_mci *host = slot->host; 1250 struct mmc_data *data; 1251 1252 WARN_ON(slot->mrq); 1253 dev_dbg(&host->pdev->dev, "MRQ: cmd %u\n", mrq->cmd->opcode); 1254 1255 /* 1256 * We may "know" the card is gone even though there's still an 1257 * electrical connection. If so, we really need to communicate 1258 * this to the MMC core since there won't be any more 1259 * interrupts as the card is completely removed. Otherwise, 1260 * the MMC core might believe the card is still there even 1261 * though the card was just removed very slowly. 1262 */ 1263 if (!test_bit(ATMCI_CARD_PRESENT, &slot->flags)) { 1264 mrq->cmd->error = -ENOMEDIUM; 1265 mmc_request_done(mmc, mrq); 1266 return; 1267 } 1268 1269 /* We don't support multiple blocks of weird lengths. */ 1270 data = mrq->data; 1271 if (data && data->blocks > 1 && data->blksz & 3) { 1272 mrq->cmd->error = -EINVAL; 1273 mmc_request_done(mmc, mrq); 1274 } 1275 1276 atmci_queue_request(host, slot, mrq); 1277 } 1278 1279 static void atmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) 1280 { 1281 struct atmel_mci_slot *slot = mmc_priv(mmc); 1282 struct atmel_mci *host = slot->host; 1283 unsigned int i; 1284 bool unprepare_clk; 1285 1286 slot->sdc_reg &= ~ATMCI_SDCBUS_MASK; 1287 switch (ios->bus_width) { 1288 case MMC_BUS_WIDTH_1: 1289 slot->sdc_reg |= ATMCI_SDCBUS_1BIT; 1290 break; 1291 case MMC_BUS_WIDTH_4: 1292 slot->sdc_reg |= ATMCI_SDCBUS_4BIT; 1293 break; 1294 } 1295 1296 if (ios->clock) { 1297 unsigned int clock_min = ~0U; 1298 u32 clkdiv; 1299 1300 clk_prepare(host->mck); 1301 unprepare_clk = true; 1302 1303 spin_lock_bh(&host->lock); 1304 if (!host->mode_reg) { 1305 clk_enable(host->mck); 1306 unprepare_clk = false; 1307 atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST); 1308 atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN); 1309 if (host->caps.has_cfg_reg) 1310 atmci_writel(host, ATMCI_CFG, host->cfg_reg); 1311 } 1312 1313 /* 1314 * Use mirror of ios->clock to prevent race with mmc 1315 * core ios update when finding the minimum. 1316 */ 1317 slot->clock = ios->clock; 1318 for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { 1319 if (host->slot[i] && host->slot[i]->clock 1320 && host->slot[i]->clock < clock_min) 1321 clock_min = host->slot[i]->clock; 1322 } 1323 1324 /* Calculate clock divider */ 1325 if (host->caps.has_odd_clk_div) { 1326 clkdiv = DIV_ROUND_UP(host->bus_hz, clock_min) - 2; 1327 if (clkdiv > 511) { 1328 dev_warn(&mmc->class_dev, 1329 "clock %u too slow; using %lu\n", 1330 clock_min, host->bus_hz / (511 + 2)); 1331 clkdiv = 511; 1332 } 1333 host->mode_reg = ATMCI_MR_CLKDIV(clkdiv >> 1) 1334 | ATMCI_MR_CLKODD(clkdiv & 1); 1335 } else { 1336 clkdiv = DIV_ROUND_UP(host->bus_hz, 2 * clock_min) - 1; 1337 if (clkdiv > 255) { 1338 dev_warn(&mmc->class_dev, 1339 "clock %u too slow; using %lu\n", 1340 clock_min, host->bus_hz / (2 * 256)); 1341 clkdiv = 255; 1342 } 1343 host->mode_reg = ATMCI_MR_CLKDIV(clkdiv); 1344 } 1345 1346 /* 1347 * WRPROOF and RDPROOF prevent overruns/underruns by 1348 * stopping the clock when the FIFO is full/empty. 1349 * This state is not expected to last for long. 1350 */ 1351 if (host->caps.has_rwproof) 1352 host->mode_reg |= (ATMCI_MR_WRPROOF | ATMCI_MR_RDPROOF); 1353 1354 if (host->caps.has_cfg_reg) { 1355 /* setup High Speed mode in relation with card capacity */ 1356 if (ios->timing == MMC_TIMING_SD_HS) 1357 host->cfg_reg |= ATMCI_CFG_HSMODE; 1358 else 1359 host->cfg_reg &= ~ATMCI_CFG_HSMODE; 1360 } 1361 1362 if (list_empty(&host->queue)) { 1363 atmci_writel(host, ATMCI_MR, host->mode_reg); 1364 if (host->caps.has_cfg_reg) 1365 atmci_writel(host, ATMCI_CFG, host->cfg_reg); 1366 } else { 1367 host->need_clock_update = true; 1368 } 1369 1370 spin_unlock_bh(&host->lock); 1371 } else { 1372 bool any_slot_active = false; 1373 1374 unprepare_clk = false; 1375 1376 spin_lock_bh(&host->lock); 1377 slot->clock = 0; 1378 for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { 1379 if (host->slot[i] && host->slot[i]->clock) { 1380 any_slot_active = true; 1381 break; 1382 } 1383 } 1384 if (!any_slot_active) { 1385 atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS); 1386 if (host->mode_reg) { 1387 atmci_readl(host, ATMCI_MR); 1388 clk_disable(host->mck); 1389 unprepare_clk = true; 1390 } 1391 host->mode_reg = 0; 1392 } 1393 spin_unlock_bh(&host->lock); 1394 } 1395 1396 if (unprepare_clk) 1397 clk_unprepare(host->mck); 1398 1399 switch (ios->power_mode) { 1400 case MMC_POWER_OFF: 1401 if (!IS_ERR(mmc->supply.vmmc)) 1402 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, 0); 1403 break; 1404 case MMC_POWER_UP: 1405 set_bit(ATMCI_CARD_NEED_INIT, &slot->flags); 1406 if (!IS_ERR(mmc->supply.vmmc)) 1407 mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, ios->vdd); 1408 break; 1409 default: 1410 /* 1411 * TODO: None of the currently available AVR32-based 1412 * boards allow MMC power to be turned off. Implement 1413 * power control when this can be tested properly. 1414 * 1415 * We also need to hook this into the clock management 1416 * somehow so that newly inserted cards aren't 1417 * subjected to a fast clock before we have a chance 1418 * to figure out what the maximum rate is. Currently, 1419 * there's no way to avoid this, and there never will 1420 * be for boards that don't support power control. 1421 */ 1422 break; 1423 } 1424 } 1425 1426 static int atmci_get_ro(struct mmc_host *mmc) 1427 { 1428 int read_only = -ENOSYS; 1429 struct atmel_mci_slot *slot = mmc_priv(mmc); 1430 1431 if (gpio_is_valid(slot->wp_pin)) { 1432 read_only = gpio_get_value(slot->wp_pin); 1433 dev_dbg(&mmc->class_dev, "card is %s\n", 1434 read_only ? "read-only" : "read-write"); 1435 } 1436 1437 return read_only; 1438 } 1439 1440 static int atmci_get_cd(struct mmc_host *mmc) 1441 { 1442 int present = -ENOSYS; 1443 struct atmel_mci_slot *slot = mmc_priv(mmc); 1444 1445 if (gpio_is_valid(slot->detect_pin)) { 1446 present = !(gpio_get_value(slot->detect_pin) ^ 1447 slot->detect_is_active_high); 1448 dev_dbg(&mmc->class_dev, "card is %spresent\n", 1449 present ? "" : "not "); 1450 } 1451 1452 return present; 1453 } 1454 1455 static void atmci_enable_sdio_irq(struct mmc_host *mmc, int enable) 1456 { 1457 struct atmel_mci_slot *slot = mmc_priv(mmc); 1458 struct atmel_mci *host = slot->host; 1459 1460 if (enable) 1461 atmci_writel(host, ATMCI_IER, slot->sdio_irq); 1462 else 1463 atmci_writel(host, ATMCI_IDR, slot->sdio_irq); 1464 } 1465 1466 static const struct mmc_host_ops atmci_ops = { 1467 .request = atmci_request, 1468 .set_ios = atmci_set_ios, 1469 .get_ro = atmci_get_ro, 1470 .get_cd = atmci_get_cd, 1471 .enable_sdio_irq = atmci_enable_sdio_irq, 1472 }; 1473 1474 /* Called with host->lock held */ 1475 static void atmci_request_end(struct atmel_mci *host, struct mmc_request *mrq) 1476 __releases(&host->lock) 1477 __acquires(&host->lock) 1478 { 1479 struct atmel_mci_slot *slot = NULL; 1480 struct mmc_host *prev_mmc = host->cur_slot->mmc; 1481 1482 WARN_ON(host->cmd || host->data); 1483 1484 /* 1485 * Update the MMC clock rate if necessary. This may be 1486 * necessary if set_ios() is called when a different slot is 1487 * busy transferring data. 1488 */ 1489 if (host->need_clock_update) { 1490 atmci_writel(host, ATMCI_MR, host->mode_reg); 1491 if (host->caps.has_cfg_reg) 1492 atmci_writel(host, ATMCI_CFG, host->cfg_reg); 1493 } 1494 1495 host->cur_slot->mrq = NULL; 1496 host->mrq = NULL; 1497 if (!list_empty(&host->queue)) { 1498 slot = list_entry(host->queue.next, 1499 struct atmel_mci_slot, queue_node); 1500 list_del(&slot->queue_node); 1501 dev_vdbg(&host->pdev->dev, "list not empty: %s is next\n", 1502 mmc_hostname(slot->mmc)); 1503 host->state = STATE_SENDING_CMD; 1504 atmci_start_request(host, slot); 1505 } else { 1506 dev_vdbg(&host->pdev->dev, "list empty\n"); 1507 host->state = STATE_IDLE; 1508 } 1509 1510 del_timer(&host->timer); 1511 1512 spin_unlock(&host->lock); 1513 mmc_request_done(prev_mmc, mrq); 1514 spin_lock(&host->lock); 1515 } 1516 1517 static void atmci_command_complete(struct atmel_mci *host, 1518 struct mmc_command *cmd) 1519 { 1520 u32 status = host->cmd_status; 1521 1522 /* Read the response from the card (up to 16 bytes) */ 1523 cmd->resp[0] = atmci_readl(host, ATMCI_RSPR); 1524 cmd->resp[1] = atmci_readl(host, ATMCI_RSPR); 1525 cmd->resp[2] = atmci_readl(host, ATMCI_RSPR); 1526 cmd->resp[3] = atmci_readl(host, ATMCI_RSPR); 1527 1528 if (status & ATMCI_RTOE) 1529 cmd->error = -ETIMEDOUT; 1530 else if ((cmd->flags & MMC_RSP_CRC) && (status & ATMCI_RCRCE)) 1531 cmd->error = -EILSEQ; 1532 else if (status & (ATMCI_RINDE | ATMCI_RDIRE | ATMCI_RENDE)) 1533 cmd->error = -EIO; 1534 else if (host->mrq->data && (host->mrq->data->blksz & 3)) { 1535 if (host->caps.need_blksz_mul_4) { 1536 cmd->error = -EINVAL; 1537 host->need_reset = 1; 1538 } 1539 } else 1540 cmd->error = 0; 1541 } 1542 1543 static void atmci_detect_change(unsigned long data) 1544 { 1545 struct atmel_mci_slot *slot = (struct atmel_mci_slot *)data; 1546 bool present; 1547 bool present_old; 1548 1549 /* 1550 * atmci_cleanup_slot() sets the ATMCI_SHUTDOWN flag before 1551 * freeing the interrupt. We must not re-enable the interrupt 1552 * if it has been freed, and if we're shutting down, it 1553 * doesn't really matter whether the card is present or not. 1554 */ 1555 smp_rmb(); 1556 if (test_bit(ATMCI_SHUTDOWN, &slot->flags)) 1557 return; 1558 1559 enable_irq(gpio_to_irq(slot->detect_pin)); 1560 present = !(gpio_get_value(slot->detect_pin) ^ 1561 slot->detect_is_active_high); 1562 present_old = test_bit(ATMCI_CARD_PRESENT, &slot->flags); 1563 1564 dev_vdbg(&slot->mmc->class_dev, "detect change: %d (was %d)\n", 1565 present, present_old); 1566 1567 if (present != present_old) { 1568 struct atmel_mci *host = slot->host; 1569 struct mmc_request *mrq; 1570 1571 dev_dbg(&slot->mmc->class_dev, "card %s\n", 1572 present ? "inserted" : "removed"); 1573 1574 spin_lock(&host->lock); 1575 1576 if (!present) 1577 clear_bit(ATMCI_CARD_PRESENT, &slot->flags); 1578 else 1579 set_bit(ATMCI_CARD_PRESENT, &slot->flags); 1580 1581 /* Clean up queue if present */ 1582 mrq = slot->mrq; 1583 if (mrq) { 1584 if (mrq == host->mrq) { 1585 /* 1586 * Reset controller to terminate any ongoing 1587 * commands or data transfers. 1588 */ 1589 atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST); 1590 atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIEN); 1591 atmci_writel(host, ATMCI_MR, host->mode_reg); 1592 if (host->caps.has_cfg_reg) 1593 atmci_writel(host, ATMCI_CFG, host->cfg_reg); 1594 1595 host->data = NULL; 1596 host->cmd = NULL; 1597 1598 switch (host->state) { 1599 case STATE_IDLE: 1600 break; 1601 case STATE_SENDING_CMD: 1602 mrq->cmd->error = -ENOMEDIUM; 1603 if (mrq->data) 1604 host->stop_transfer(host); 1605 break; 1606 case STATE_DATA_XFER: 1607 mrq->data->error = -ENOMEDIUM; 1608 host->stop_transfer(host); 1609 break; 1610 case STATE_WAITING_NOTBUSY: 1611 mrq->data->error = -ENOMEDIUM; 1612 break; 1613 case STATE_SENDING_STOP: 1614 mrq->stop->error = -ENOMEDIUM; 1615 break; 1616 case STATE_END_REQUEST: 1617 break; 1618 } 1619 1620 atmci_request_end(host, mrq); 1621 } else { 1622 list_del(&slot->queue_node); 1623 mrq->cmd->error = -ENOMEDIUM; 1624 if (mrq->data) 1625 mrq->data->error = -ENOMEDIUM; 1626 if (mrq->stop) 1627 mrq->stop->error = -ENOMEDIUM; 1628 1629 spin_unlock(&host->lock); 1630 mmc_request_done(slot->mmc, mrq); 1631 spin_lock(&host->lock); 1632 } 1633 } 1634 spin_unlock(&host->lock); 1635 1636 mmc_detect_change(slot->mmc, 0); 1637 } 1638 } 1639 1640 static void atmci_tasklet_func(unsigned long priv) 1641 { 1642 struct atmel_mci *host = (struct atmel_mci *)priv; 1643 struct mmc_request *mrq = host->mrq; 1644 struct mmc_data *data = host->data; 1645 enum atmel_mci_state state = host->state; 1646 enum atmel_mci_state prev_state; 1647 u32 status; 1648 1649 spin_lock(&host->lock); 1650 1651 state = host->state; 1652 1653 dev_vdbg(&host->pdev->dev, 1654 "tasklet: state %u pending/completed/mask %lx/%lx/%x\n", 1655 state, host->pending_events, host->completed_events, 1656 atmci_readl(host, ATMCI_IMR)); 1657 1658 do { 1659 prev_state = state; 1660 dev_dbg(&host->pdev->dev, "FSM: state=%d\n", state); 1661 1662 switch (state) { 1663 case STATE_IDLE: 1664 break; 1665 1666 case STATE_SENDING_CMD: 1667 /* 1668 * Command has been sent, we are waiting for command 1669 * ready. Then we have three next states possible: 1670 * END_REQUEST by default, WAITING_NOTBUSY if it's a 1671 * command needing it or DATA_XFER if there is data. 1672 */ 1673 dev_dbg(&host->pdev->dev, "FSM: cmd ready?\n"); 1674 if (!atmci_test_and_clear_pending(host, 1675 EVENT_CMD_RDY)) 1676 break; 1677 1678 dev_dbg(&host->pdev->dev, "set completed cmd ready\n"); 1679 host->cmd = NULL; 1680 atmci_set_completed(host, EVENT_CMD_RDY); 1681 atmci_command_complete(host, mrq->cmd); 1682 if (mrq->data) { 1683 dev_dbg(&host->pdev->dev, 1684 "command with data transfer"); 1685 /* 1686 * If there is a command error don't start 1687 * data transfer. 1688 */ 1689 if (mrq->cmd->error) { 1690 host->stop_transfer(host); 1691 host->data = NULL; 1692 atmci_writel(host, ATMCI_IDR, 1693 ATMCI_TXRDY | ATMCI_RXRDY 1694 | ATMCI_DATA_ERROR_FLAGS); 1695 state = STATE_END_REQUEST; 1696 } else 1697 state = STATE_DATA_XFER; 1698 } else if ((!mrq->data) && (mrq->cmd->flags & MMC_RSP_BUSY)) { 1699 dev_dbg(&host->pdev->dev, 1700 "command response need waiting notbusy"); 1701 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); 1702 state = STATE_WAITING_NOTBUSY; 1703 } else 1704 state = STATE_END_REQUEST; 1705 1706 break; 1707 1708 case STATE_DATA_XFER: 1709 if (atmci_test_and_clear_pending(host, 1710 EVENT_DATA_ERROR)) { 1711 dev_dbg(&host->pdev->dev, "set completed data error\n"); 1712 atmci_set_completed(host, EVENT_DATA_ERROR); 1713 state = STATE_END_REQUEST; 1714 break; 1715 } 1716 1717 /* 1718 * A data transfer is in progress. The event expected 1719 * to move to the next state depends of data transfer 1720 * type (PDC or DMA). Once transfer done we can move 1721 * to the next step which is WAITING_NOTBUSY in write 1722 * case and directly SENDING_STOP in read case. 1723 */ 1724 dev_dbg(&host->pdev->dev, "FSM: xfer complete?\n"); 1725 if (!atmci_test_and_clear_pending(host, 1726 EVENT_XFER_COMPLETE)) 1727 break; 1728 1729 dev_dbg(&host->pdev->dev, 1730 "(%s) set completed xfer complete\n", 1731 __func__); 1732 atmci_set_completed(host, EVENT_XFER_COMPLETE); 1733 1734 if (host->caps.need_notbusy_for_read_ops || 1735 (host->data->flags & MMC_DATA_WRITE)) { 1736 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); 1737 state = STATE_WAITING_NOTBUSY; 1738 } else if (host->mrq->stop) { 1739 atmci_writel(host, ATMCI_IER, ATMCI_CMDRDY); 1740 atmci_send_stop_cmd(host, data); 1741 state = STATE_SENDING_STOP; 1742 } else { 1743 host->data = NULL; 1744 data->bytes_xfered = data->blocks * data->blksz; 1745 data->error = 0; 1746 state = STATE_END_REQUEST; 1747 } 1748 break; 1749 1750 case STATE_WAITING_NOTBUSY: 1751 /* 1752 * We can be in the state for two reasons: a command 1753 * requiring waiting not busy signal (stop command 1754 * included) or a write operation. In the latest case, 1755 * we need to send a stop command. 1756 */ 1757 dev_dbg(&host->pdev->dev, "FSM: not busy?\n"); 1758 if (!atmci_test_and_clear_pending(host, 1759 EVENT_NOTBUSY)) 1760 break; 1761 1762 dev_dbg(&host->pdev->dev, "set completed not busy\n"); 1763 atmci_set_completed(host, EVENT_NOTBUSY); 1764 1765 if (host->data) { 1766 /* 1767 * For some commands such as CMD53, even if 1768 * there is data transfer, there is no stop 1769 * command to send. 1770 */ 1771 if (host->mrq->stop) { 1772 atmci_writel(host, ATMCI_IER, 1773 ATMCI_CMDRDY); 1774 atmci_send_stop_cmd(host, data); 1775 state = STATE_SENDING_STOP; 1776 } else { 1777 host->data = NULL; 1778 data->bytes_xfered = data->blocks 1779 * data->blksz; 1780 data->error = 0; 1781 state = STATE_END_REQUEST; 1782 } 1783 } else 1784 state = STATE_END_REQUEST; 1785 break; 1786 1787 case STATE_SENDING_STOP: 1788 /* 1789 * In this state, it is important to set host->data to 1790 * NULL (which is tested in the waiting notbusy state) 1791 * in order to go to the end request state instead of 1792 * sending stop again. 1793 */ 1794 dev_dbg(&host->pdev->dev, "FSM: cmd ready?\n"); 1795 if (!atmci_test_and_clear_pending(host, 1796 EVENT_CMD_RDY)) 1797 break; 1798 1799 dev_dbg(&host->pdev->dev, "FSM: cmd ready\n"); 1800 host->cmd = NULL; 1801 data->bytes_xfered = data->blocks * data->blksz; 1802 data->error = 0; 1803 atmci_command_complete(host, mrq->stop); 1804 if (mrq->stop->error) { 1805 host->stop_transfer(host); 1806 atmci_writel(host, ATMCI_IDR, 1807 ATMCI_TXRDY | ATMCI_RXRDY 1808 | ATMCI_DATA_ERROR_FLAGS); 1809 state = STATE_END_REQUEST; 1810 } else { 1811 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); 1812 state = STATE_WAITING_NOTBUSY; 1813 } 1814 host->data = NULL; 1815 break; 1816 1817 case STATE_END_REQUEST: 1818 atmci_writel(host, ATMCI_IDR, ATMCI_TXRDY | ATMCI_RXRDY 1819 | ATMCI_DATA_ERROR_FLAGS); 1820 status = host->data_status; 1821 if (unlikely(status)) { 1822 host->stop_transfer(host); 1823 host->data = NULL; 1824 if (data) { 1825 if (status & ATMCI_DTOE) { 1826 data->error = -ETIMEDOUT; 1827 } else if (status & ATMCI_DCRCE) { 1828 data->error = -EILSEQ; 1829 } else { 1830 data->error = -EIO; 1831 } 1832 } 1833 } 1834 1835 atmci_request_end(host, host->mrq); 1836 state = STATE_IDLE; 1837 break; 1838 } 1839 } while (state != prev_state); 1840 1841 host->state = state; 1842 1843 spin_unlock(&host->lock); 1844 } 1845 1846 static void atmci_read_data_pio(struct atmel_mci *host) 1847 { 1848 struct scatterlist *sg = host->sg; 1849 void *buf = sg_virt(sg); 1850 unsigned int offset = host->pio_offset; 1851 struct mmc_data *data = host->data; 1852 u32 value; 1853 u32 status; 1854 unsigned int nbytes = 0; 1855 1856 do { 1857 value = atmci_readl(host, ATMCI_RDR); 1858 if (likely(offset + 4 <= sg->length)) { 1859 put_unaligned(value, (u32 *)(buf + offset)); 1860 1861 offset += 4; 1862 nbytes += 4; 1863 1864 if (offset == sg->length) { 1865 flush_dcache_page(sg_page(sg)); 1866 host->sg = sg = sg_next(sg); 1867 host->sg_len--; 1868 if (!sg || !host->sg_len) 1869 goto done; 1870 1871 offset = 0; 1872 buf = sg_virt(sg); 1873 } 1874 } else { 1875 unsigned int remaining = sg->length - offset; 1876 memcpy(buf + offset, &value, remaining); 1877 nbytes += remaining; 1878 1879 flush_dcache_page(sg_page(sg)); 1880 host->sg = sg = sg_next(sg); 1881 host->sg_len--; 1882 if (!sg || !host->sg_len) 1883 goto done; 1884 1885 offset = 4 - remaining; 1886 buf = sg_virt(sg); 1887 memcpy(buf, (u8 *)&value + remaining, offset); 1888 nbytes += offset; 1889 } 1890 1891 status = atmci_readl(host, ATMCI_SR); 1892 if (status & ATMCI_DATA_ERROR_FLAGS) { 1893 atmci_writel(host, ATMCI_IDR, (ATMCI_NOTBUSY | ATMCI_RXRDY 1894 | ATMCI_DATA_ERROR_FLAGS)); 1895 host->data_status = status; 1896 data->bytes_xfered += nbytes; 1897 return; 1898 } 1899 } while (status & ATMCI_RXRDY); 1900 1901 host->pio_offset = offset; 1902 data->bytes_xfered += nbytes; 1903 1904 return; 1905 1906 done: 1907 atmci_writel(host, ATMCI_IDR, ATMCI_RXRDY); 1908 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); 1909 data->bytes_xfered += nbytes; 1910 smp_wmb(); 1911 atmci_set_pending(host, EVENT_XFER_COMPLETE); 1912 } 1913 1914 static void atmci_write_data_pio(struct atmel_mci *host) 1915 { 1916 struct scatterlist *sg = host->sg; 1917 void *buf = sg_virt(sg); 1918 unsigned int offset = host->pio_offset; 1919 struct mmc_data *data = host->data; 1920 u32 value; 1921 u32 status; 1922 unsigned int nbytes = 0; 1923 1924 do { 1925 if (likely(offset + 4 <= sg->length)) { 1926 value = get_unaligned((u32 *)(buf + offset)); 1927 atmci_writel(host, ATMCI_TDR, value); 1928 1929 offset += 4; 1930 nbytes += 4; 1931 if (offset == sg->length) { 1932 host->sg = sg = sg_next(sg); 1933 host->sg_len--; 1934 if (!sg || !host->sg_len) 1935 goto done; 1936 1937 offset = 0; 1938 buf = sg_virt(sg); 1939 } 1940 } else { 1941 unsigned int remaining = sg->length - offset; 1942 1943 value = 0; 1944 memcpy(&value, buf + offset, remaining); 1945 nbytes += remaining; 1946 1947 host->sg = sg = sg_next(sg); 1948 host->sg_len--; 1949 if (!sg || !host->sg_len) { 1950 atmci_writel(host, ATMCI_TDR, value); 1951 goto done; 1952 } 1953 1954 offset = 4 - remaining; 1955 buf = sg_virt(sg); 1956 memcpy((u8 *)&value + remaining, buf, offset); 1957 atmci_writel(host, ATMCI_TDR, value); 1958 nbytes += offset; 1959 } 1960 1961 status = atmci_readl(host, ATMCI_SR); 1962 if (status & ATMCI_DATA_ERROR_FLAGS) { 1963 atmci_writel(host, ATMCI_IDR, (ATMCI_NOTBUSY | ATMCI_TXRDY 1964 | ATMCI_DATA_ERROR_FLAGS)); 1965 host->data_status = status; 1966 data->bytes_xfered += nbytes; 1967 return; 1968 } 1969 } while (status & ATMCI_TXRDY); 1970 1971 host->pio_offset = offset; 1972 data->bytes_xfered += nbytes; 1973 1974 return; 1975 1976 done: 1977 atmci_writel(host, ATMCI_IDR, ATMCI_TXRDY); 1978 atmci_writel(host, ATMCI_IER, ATMCI_NOTBUSY); 1979 data->bytes_xfered += nbytes; 1980 smp_wmb(); 1981 atmci_set_pending(host, EVENT_XFER_COMPLETE); 1982 } 1983 1984 static void atmci_sdio_interrupt(struct atmel_mci *host, u32 status) 1985 { 1986 int i; 1987 1988 for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { 1989 struct atmel_mci_slot *slot = host->slot[i]; 1990 if (slot && (status & slot->sdio_irq)) { 1991 mmc_signal_sdio_irq(slot->mmc); 1992 } 1993 } 1994 } 1995 1996 1997 static irqreturn_t atmci_interrupt(int irq, void *dev_id) 1998 { 1999 struct atmel_mci *host = dev_id; 2000 u32 status, mask, pending; 2001 unsigned int pass_count = 0; 2002 2003 do { 2004 status = atmci_readl(host, ATMCI_SR); 2005 mask = atmci_readl(host, ATMCI_IMR); 2006 pending = status & mask; 2007 if (!pending) 2008 break; 2009 2010 if (pending & ATMCI_DATA_ERROR_FLAGS) { 2011 dev_dbg(&host->pdev->dev, "IRQ: data error\n"); 2012 atmci_writel(host, ATMCI_IDR, ATMCI_DATA_ERROR_FLAGS 2013 | ATMCI_RXRDY | ATMCI_TXRDY 2014 | ATMCI_ENDRX | ATMCI_ENDTX 2015 | ATMCI_RXBUFF | ATMCI_TXBUFE); 2016 2017 host->data_status = status; 2018 dev_dbg(&host->pdev->dev, "set pending data error\n"); 2019 smp_wmb(); 2020 atmci_set_pending(host, EVENT_DATA_ERROR); 2021 tasklet_schedule(&host->tasklet); 2022 } 2023 2024 if (pending & ATMCI_TXBUFE) { 2025 dev_dbg(&host->pdev->dev, "IRQ: tx buffer empty\n"); 2026 atmci_writel(host, ATMCI_IDR, ATMCI_TXBUFE); 2027 atmci_writel(host, ATMCI_IDR, ATMCI_ENDTX); 2028 /* 2029 * We can receive this interruption before having configured 2030 * the second pdc buffer, so we need to reconfigure first and 2031 * second buffers again 2032 */ 2033 if (host->data_size) { 2034 atmci_pdc_set_both_buf(host, XFER_TRANSMIT); 2035 atmci_writel(host, ATMCI_IER, ATMCI_ENDTX); 2036 atmci_writel(host, ATMCI_IER, ATMCI_TXBUFE); 2037 } else { 2038 atmci_pdc_complete(host); 2039 } 2040 } else if (pending & ATMCI_ENDTX) { 2041 dev_dbg(&host->pdev->dev, "IRQ: end of tx buffer\n"); 2042 atmci_writel(host, ATMCI_IDR, ATMCI_ENDTX); 2043 2044 if (host->data_size) { 2045 atmci_pdc_set_single_buf(host, 2046 XFER_TRANSMIT, PDC_SECOND_BUF); 2047 atmci_writel(host, ATMCI_IER, ATMCI_ENDTX); 2048 } 2049 } 2050 2051 if (pending & ATMCI_RXBUFF) { 2052 dev_dbg(&host->pdev->dev, "IRQ: rx buffer full\n"); 2053 atmci_writel(host, ATMCI_IDR, ATMCI_RXBUFF); 2054 atmci_writel(host, ATMCI_IDR, ATMCI_ENDRX); 2055 /* 2056 * We can receive this interruption before having configured 2057 * the second pdc buffer, so we need to reconfigure first and 2058 * second buffers again 2059 */ 2060 if (host->data_size) { 2061 atmci_pdc_set_both_buf(host, XFER_RECEIVE); 2062 atmci_writel(host, ATMCI_IER, ATMCI_ENDRX); 2063 atmci_writel(host, ATMCI_IER, ATMCI_RXBUFF); 2064 } else { 2065 atmci_pdc_complete(host); 2066 } 2067 } else if (pending & ATMCI_ENDRX) { 2068 dev_dbg(&host->pdev->dev, "IRQ: end of rx buffer\n"); 2069 atmci_writel(host, ATMCI_IDR, ATMCI_ENDRX); 2070 2071 if (host->data_size) { 2072 atmci_pdc_set_single_buf(host, 2073 XFER_RECEIVE, PDC_SECOND_BUF); 2074 atmci_writel(host, ATMCI_IER, ATMCI_ENDRX); 2075 } 2076 } 2077 2078 /* 2079 * First mci IPs, so mainly the ones having pdc, have some 2080 * issues with the notbusy signal. You can't get it after 2081 * data transmission if you have not sent a stop command. 2082 * The appropriate workaround is to use the BLKE signal. 2083 */ 2084 if (pending & ATMCI_BLKE) { 2085 dev_dbg(&host->pdev->dev, "IRQ: blke\n"); 2086 atmci_writel(host, ATMCI_IDR, ATMCI_BLKE); 2087 smp_wmb(); 2088 dev_dbg(&host->pdev->dev, "set pending notbusy\n"); 2089 atmci_set_pending(host, EVENT_NOTBUSY); 2090 tasklet_schedule(&host->tasklet); 2091 } 2092 2093 if (pending & ATMCI_NOTBUSY) { 2094 dev_dbg(&host->pdev->dev, "IRQ: not_busy\n"); 2095 atmci_writel(host, ATMCI_IDR, ATMCI_NOTBUSY); 2096 smp_wmb(); 2097 dev_dbg(&host->pdev->dev, "set pending notbusy\n"); 2098 atmci_set_pending(host, EVENT_NOTBUSY); 2099 tasklet_schedule(&host->tasklet); 2100 } 2101 2102 if (pending & ATMCI_RXRDY) 2103 atmci_read_data_pio(host); 2104 if (pending & ATMCI_TXRDY) 2105 atmci_write_data_pio(host); 2106 2107 if (pending & ATMCI_CMDRDY) { 2108 dev_dbg(&host->pdev->dev, "IRQ: cmd ready\n"); 2109 atmci_writel(host, ATMCI_IDR, ATMCI_CMDRDY); 2110 host->cmd_status = status; 2111 smp_wmb(); 2112 dev_dbg(&host->pdev->dev, "set pending cmd rdy\n"); 2113 atmci_set_pending(host, EVENT_CMD_RDY); 2114 tasklet_schedule(&host->tasklet); 2115 } 2116 2117 if (pending & (ATMCI_SDIOIRQA | ATMCI_SDIOIRQB)) 2118 atmci_sdio_interrupt(host, status); 2119 2120 } while (pass_count++ < 5); 2121 2122 return pass_count ? IRQ_HANDLED : IRQ_NONE; 2123 } 2124 2125 static irqreturn_t atmci_detect_interrupt(int irq, void *dev_id) 2126 { 2127 struct atmel_mci_slot *slot = dev_id; 2128 2129 /* 2130 * Disable interrupts until the pin has stabilized and check 2131 * the state then. Use mod_timer() since we may be in the 2132 * middle of the timer routine when this interrupt triggers. 2133 */ 2134 disable_irq_nosync(irq); 2135 mod_timer(&slot->detect_timer, jiffies + msecs_to_jiffies(20)); 2136 2137 return IRQ_HANDLED; 2138 } 2139 2140 static int __init atmci_init_slot(struct atmel_mci *host, 2141 struct mci_slot_pdata *slot_data, unsigned int id, 2142 u32 sdc_reg, u32 sdio_irq) 2143 { 2144 struct mmc_host *mmc; 2145 struct atmel_mci_slot *slot; 2146 2147 mmc = mmc_alloc_host(sizeof(struct atmel_mci_slot), &host->pdev->dev); 2148 if (!mmc) 2149 return -ENOMEM; 2150 2151 slot = mmc_priv(mmc); 2152 slot->mmc = mmc; 2153 slot->host = host; 2154 slot->detect_pin = slot_data->detect_pin; 2155 slot->wp_pin = slot_data->wp_pin; 2156 slot->detect_is_active_high = slot_data->detect_is_active_high; 2157 slot->sdc_reg = sdc_reg; 2158 slot->sdio_irq = sdio_irq; 2159 2160 dev_dbg(&mmc->class_dev, 2161 "slot[%u]: bus_width=%u, detect_pin=%d, " 2162 "detect_is_active_high=%s, wp_pin=%d\n", 2163 id, slot_data->bus_width, slot_data->detect_pin, 2164 slot_data->detect_is_active_high ? "true" : "false", 2165 slot_data->wp_pin); 2166 2167 mmc->ops = &atmci_ops; 2168 mmc->f_min = DIV_ROUND_UP(host->bus_hz, 512); 2169 mmc->f_max = host->bus_hz / 2; 2170 mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34; 2171 if (sdio_irq) 2172 mmc->caps |= MMC_CAP_SDIO_IRQ; 2173 if (host->caps.has_highspeed) 2174 mmc->caps |= MMC_CAP_SD_HIGHSPEED; 2175 /* 2176 * Without the read/write proof capability, it is strongly suggested to 2177 * use only one bit for data to prevent fifo underruns and overruns 2178 * which will corrupt data. 2179 */ 2180 if ((slot_data->bus_width >= 4) && host->caps.has_rwproof) 2181 mmc->caps |= MMC_CAP_4_BIT_DATA; 2182 2183 if (atmci_get_version(host) < 0x200) { 2184 mmc->max_segs = 256; 2185 mmc->max_blk_size = 4095; 2186 mmc->max_blk_count = 256; 2187 mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; 2188 mmc->max_seg_size = mmc->max_blk_size * mmc->max_segs; 2189 } else { 2190 mmc->max_segs = 64; 2191 mmc->max_req_size = 32768 * 512; 2192 mmc->max_blk_size = 32768; 2193 mmc->max_blk_count = 512; 2194 } 2195 2196 /* Assume card is present initially */ 2197 set_bit(ATMCI_CARD_PRESENT, &slot->flags); 2198 if (gpio_is_valid(slot->detect_pin)) { 2199 if (devm_gpio_request(&host->pdev->dev, slot->detect_pin, 2200 "mmc_detect")) { 2201 dev_dbg(&mmc->class_dev, "no detect pin available\n"); 2202 slot->detect_pin = -EBUSY; 2203 } else if (gpio_get_value(slot->detect_pin) ^ 2204 slot->detect_is_active_high) { 2205 clear_bit(ATMCI_CARD_PRESENT, &slot->flags); 2206 } 2207 } 2208 2209 if (!gpio_is_valid(slot->detect_pin)) 2210 mmc->caps |= MMC_CAP_NEEDS_POLL; 2211 2212 if (gpio_is_valid(slot->wp_pin)) { 2213 if (devm_gpio_request(&host->pdev->dev, slot->wp_pin, 2214 "mmc_wp")) { 2215 dev_dbg(&mmc->class_dev, "no WP pin available\n"); 2216 slot->wp_pin = -EBUSY; 2217 } 2218 } 2219 2220 host->slot[id] = slot; 2221 mmc_regulator_get_supply(mmc); 2222 mmc_add_host(mmc); 2223 2224 if (gpio_is_valid(slot->detect_pin)) { 2225 int ret; 2226 2227 setup_timer(&slot->detect_timer, atmci_detect_change, 2228 (unsigned long)slot); 2229 2230 ret = request_irq(gpio_to_irq(slot->detect_pin), 2231 atmci_detect_interrupt, 2232 IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, 2233 "mmc-detect", slot); 2234 if (ret) { 2235 dev_dbg(&mmc->class_dev, 2236 "could not request IRQ %d for detect pin\n", 2237 gpio_to_irq(slot->detect_pin)); 2238 slot->detect_pin = -EBUSY; 2239 } 2240 } 2241 2242 atmci_init_debugfs(slot); 2243 2244 return 0; 2245 } 2246 2247 static void atmci_cleanup_slot(struct atmel_mci_slot *slot, 2248 unsigned int id) 2249 { 2250 /* Debugfs stuff is cleaned up by mmc core */ 2251 2252 set_bit(ATMCI_SHUTDOWN, &slot->flags); 2253 smp_wmb(); 2254 2255 mmc_remove_host(slot->mmc); 2256 2257 if (gpio_is_valid(slot->detect_pin)) { 2258 int pin = slot->detect_pin; 2259 2260 free_irq(gpio_to_irq(pin), slot); 2261 del_timer_sync(&slot->detect_timer); 2262 } 2263 2264 slot->host->slot[id] = NULL; 2265 mmc_free_host(slot->mmc); 2266 } 2267 2268 static bool atmci_filter(struct dma_chan *chan, void *pdata) 2269 { 2270 struct mci_platform_data *sl_pdata = pdata; 2271 struct mci_dma_data *sl; 2272 2273 if (!sl_pdata) 2274 return false; 2275 2276 sl = sl_pdata->dma_slave; 2277 if (sl && find_slave_dev(sl) == chan->device->dev) { 2278 chan->private = slave_data_ptr(sl); 2279 return true; 2280 } else { 2281 return false; 2282 } 2283 } 2284 2285 static bool atmci_configure_dma(struct atmel_mci *host) 2286 { 2287 struct mci_platform_data *pdata; 2288 dma_cap_mask_t mask; 2289 2290 if (host == NULL) 2291 return false; 2292 2293 pdata = host->pdev->dev.platform_data; 2294 2295 dma_cap_zero(mask); 2296 dma_cap_set(DMA_SLAVE, mask); 2297 2298 host->dma.chan = dma_request_slave_channel_compat(mask, atmci_filter, pdata, 2299 &host->pdev->dev, "rxtx"); 2300 if (!host->dma.chan) { 2301 dev_warn(&host->pdev->dev, "no DMA channel available\n"); 2302 return false; 2303 } else { 2304 dev_info(&host->pdev->dev, 2305 "using %s for DMA transfers\n", 2306 dma_chan_name(host->dma.chan)); 2307 2308 host->dma_conf.src_addr = host->mapbase + ATMCI_RDR; 2309 host->dma_conf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; 2310 host->dma_conf.src_maxburst = 1; 2311 host->dma_conf.dst_addr = host->mapbase + ATMCI_TDR; 2312 host->dma_conf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; 2313 host->dma_conf.dst_maxburst = 1; 2314 host->dma_conf.device_fc = false; 2315 return true; 2316 } 2317 } 2318 2319 /* 2320 * HSMCI (High Speed MCI) module is not fully compatible with MCI module. 2321 * HSMCI provides DMA support and a new config register but no more supports 2322 * PDC. 2323 */ 2324 static void __init atmci_get_cap(struct atmel_mci *host) 2325 { 2326 unsigned int version; 2327 2328 version = atmci_get_version(host); 2329 dev_info(&host->pdev->dev, 2330 "version: 0x%x\n", version); 2331 2332 host->caps.has_dma_conf_reg = 0; 2333 host->caps.has_pdc = ATMCI_PDC_CONNECTED; 2334 host->caps.has_cfg_reg = 0; 2335 host->caps.has_cstor_reg = 0; 2336 host->caps.has_highspeed = 0; 2337 host->caps.has_rwproof = 0; 2338 host->caps.has_odd_clk_div = 0; 2339 host->caps.has_bad_data_ordering = 1; 2340 host->caps.need_reset_after_xfer = 1; 2341 host->caps.need_blksz_mul_4 = 1; 2342 host->caps.need_notbusy_for_read_ops = 0; 2343 2344 /* keep only major version number */ 2345 switch (version & 0xf00) { 2346 case 0x600: 2347 case 0x500: 2348 host->caps.has_odd_clk_div = 1; 2349 case 0x400: 2350 case 0x300: 2351 host->caps.has_dma_conf_reg = 1; 2352 host->caps.has_pdc = 0; 2353 host->caps.has_cfg_reg = 1; 2354 host->caps.has_cstor_reg = 1; 2355 host->caps.has_highspeed = 1; 2356 case 0x200: 2357 host->caps.has_rwproof = 1; 2358 host->caps.need_blksz_mul_4 = 0; 2359 host->caps.need_notbusy_for_read_ops = 1; 2360 case 0x100: 2361 host->caps.has_bad_data_ordering = 0; 2362 host->caps.need_reset_after_xfer = 0; 2363 case 0x0: 2364 break; 2365 default: 2366 host->caps.has_pdc = 0; 2367 dev_warn(&host->pdev->dev, 2368 "Unmanaged mci version, set minimum capabilities\n"); 2369 break; 2370 } 2371 } 2372 2373 static int __init atmci_probe(struct platform_device *pdev) 2374 { 2375 struct mci_platform_data *pdata; 2376 struct atmel_mci *host; 2377 struct resource *regs; 2378 unsigned int nr_slots; 2379 int irq; 2380 int ret, i; 2381 2382 regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); 2383 if (!regs) 2384 return -ENXIO; 2385 pdata = pdev->dev.platform_data; 2386 if (!pdata) { 2387 pdata = atmci_of_init(pdev); 2388 if (IS_ERR(pdata)) { 2389 dev_err(&pdev->dev, "platform data not available\n"); 2390 return PTR_ERR(pdata); 2391 } 2392 } 2393 2394 irq = platform_get_irq(pdev, 0); 2395 if (irq < 0) 2396 return irq; 2397 2398 host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL); 2399 if (!host) 2400 return -ENOMEM; 2401 2402 host->pdev = pdev; 2403 spin_lock_init(&host->lock); 2404 INIT_LIST_HEAD(&host->queue); 2405 2406 host->mck = devm_clk_get(&pdev->dev, "mci_clk"); 2407 if (IS_ERR(host->mck)) 2408 return PTR_ERR(host->mck); 2409 2410 host->regs = devm_ioremap(&pdev->dev, regs->start, resource_size(regs)); 2411 if (!host->regs) 2412 return -ENOMEM; 2413 2414 ret = clk_prepare_enable(host->mck); 2415 if (ret) 2416 return ret; 2417 2418 atmci_writel(host, ATMCI_CR, ATMCI_CR_SWRST); 2419 host->bus_hz = clk_get_rate(host->mck); 2420 clk_disable_unprepare(host->mck); 2421 2422 host->mapbase = regs->start; 2423 2424 tasklet_init(&host->tasklet, atmci_tasklet_func, (unsigned long)host); 2425 2426 ret = request_irq(irq, atmci_interrupt, 0, dev_name(&pdev->dev), host); 2427 if (ret) 2428 return ret; 2429 2430 /* Get MCI capabilities and set operations according to it */ 2431 atmci_get_cap(host); 2432 if (atmci_configure_dma(host)) { 2433 host->prepare_data = &atmci_prepare_data_dma; 2434 host->submit_data = &atmci_submit_data_dma; 2435 host->stop_transfer = &atmci_stop_transfer_dma; 2436 } else if (host->caps.has_pdc) { 2437 dev_info(&pdev->dev, "using PDC\n"); 2438 host->prepare_data = &atmci_prepare_data_pdc; 2439 host->submit_data = &atmci_submit_data_pdc; 2440 host->stop_transfer = &atmci_stop_transfer_pdc; 2441 } else { 2442 dev_info(&pdev->dev, "using PIO\n"); 2443 host->prepare_data = &atmci_prepare_data; 2444 host->submit_data = &atmci_submit_data; 2445 host->stop_transfer = &atmci_stop_transfer; 2446 } 2447 2448 platform_set_drvdata(pdev, host); 2449 2450 setup_timer(&host->timer, atmci_timeout_timer, (unsigned long)host); 2451 2452 /* We need at least one slot to succeed */ 2453 nr_slots = 0; 2454 ret = -ENODEV; 2455 if (pdata->slot[0].bus_width) { 2456 ret = atmci_init_slot(host, &pdata->slot[0], 2457 0, ATMCI_SDCSEL_SLOT_A, ATMCI_SDIOIRQA); 2458 if (!ret) { 2459 nr_slots++; 2460 host->buf_size = host->slot[0]->mmc->max_req_size; 2461 } 2462 } 2463 if (pdata->slot[1].bus_width) { 2464 ret = atmci_init_slot(host, &pdata->slot[1], 2465 1, ATMCI_SDCSEL_SLOT_B, ATMCI_SDIOIRQB); 2466 if (!ret) { 2467 nr_slots++; 2468 if (host->slot[1]->mmc->max_req_size > host->buf_size) 2469 host->buf_size = 2470 host->slot[1]->mmc->max_req_size; 2471 } 2472 } 2473 2474 if (!nr_slots) { 2475 dev_err(&pdev->dev, "init failed: no slot defined\n"); 2476 goto err_init_slot; 2477 } 2478 2479 if (!host->caps.has_rwproof) { 2480 host->buffer = dma_alloc_coherent(&pdev->dev, host->buf_size, 2481 &host->buf_phys_addr, 2482 GFP_KERNEL); 2483 if (!host->buffer) { 2484 ret = -ENOMEM; 2485 dev_err(&pdev->dev, "buffer allocation failed\n"); 2486 goto err_dma_alloc; 2487 } 2488 } 2489 2490 dev_info(&pdev->dev, 2491 "Atmel MCI controller at 0x%08lx irq %d, %u slots\n", 2492 host->mapbase, irq, nr_slots); 2493 2494 return 0; 2495 2496 err_dma_alloc: 2497 for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { 2498 if (host->slot[i]) 2499 atmci_cleanup_slot(host->slot[i], i); 2500 } 2501 err_init_slot: 2502 del_timer_sync(&host->timer); 2503 if (host->dma.chan) 2504 dma_release_channel(host->dma.chan); 2505 free_irq(irq, host); 2506 return ret; 2507 } 2508 2509 static int __exit atmci_remove(struct platform_device *pdev) 2510 { 2511 struct atmel_mci *host = platform_get_drvdata(pdev); 2512 unsigned int i; 2513 2514 if (host->buffer) 2515 dma_free_coherent(&pdev->dev, host->buf_size, 2516 host->buffer, host->buf_phys_addr); 2517 2518 for (i = 0; i < ATMCI_MAX_NR_SLOTS; i++) { 2519 if (host->slot[i]) 2520 atmci_cleanup_slot(host->slot[i], i); 2521 } 2522 2523 clk_prepare_enable(host->mck); 2524 atmci_writel(host, ATMCI_IDR, ~0UL); 2525 atmci_writel(host, ATMCI_CR, ATMCI_CR_MCIDIS); 2526 atmci_readl(host, ATMCI_SR); 2527 clk_disable_unprepare(host->mck); 2528 2529 del_timer_sync(&host->timer); 2530 if (host->dma.chan) 2531 dma_release_channel(host->dma.chan); 2532 2533 free_irq(platform_get_irq(pdev, 0), host); 2534 2535 return 0; 2536 } 2537 2538 static struct platform_driver atmci_driver = { 2539 .remove = __exit_p(atmci_remove), 2540 .driver = { 2541 .name = "atmel_mci", 2542 .of_match_table = of_match_ptr(atmci_dt_ids), 2543 }, 2544 }; 2545 2546 static int __init atmci_init(void) 2547 { 2548 return platform_driver_probe(&atmci_driver, atmci_probe); 2549 } 2550 2551 static void __exit atmci_exit(void) 2552 { 2553 platform_driver_unregister(&atmci_driver); 2554 } 2555 2556 late_initcall(atmci_init); /* try to load after dma driver when built-in */ 2557 module_exit(atmci_exit); 2558 2559 MODULE_DESCRIPTION("Atmel Multimedia Card Interface driver"); 2560 MODULE_AUTHOR("Haavard Skinnemoen (Atmel)"); 2561 MODULE_LICENSE("GPL v2"); 2562