xref: /openbmc/linux/drivers/mmc/host/Kconfig (revision d2999e1b)
1#
2# MMC/SD host controller drivers
3#
4
5comment "MMC/SD/SDIO Host Controller Drivers"
6
7config MMC_ARMMMCI
8	tristate "ARM AMBA Multimedia Card Interface support"
9	depends on ARM_AMBA
10	help
11	  This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
12	  Interface (PL180 and PL181) support.  If you have an ARM(R)
13	  platform with a Multimedia Card slot, say Y or M here.
14
15	  If unsure, say N.
16
17config MMC_PXA
18	tristate "Intel PXA25x/26x/27x Multimedia Card Interface support"
19	depends on ARCH_PXA
20	help
21	  This selects the Intel(R) PXA(R) Multimedia card Interface.
22	  If you have a PXA(R) platform with a Multimedia Card slot,
23	  say Y or M here.
24
25	  If unsure, say N.
26
27config MMC_SDHCI
28	tristate "Secure Digital Host Controller Interface support"
29	depends on HAS_DMA
30	help
31	  This selects the generic Secure Digital Host Controller Interface.
32	  It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
33	  and Toshiba(R). Most controllers found in laptops are of this type.
34
35	  If you have a controller with this interface, say Y or M here. You
36	  also need to enable an appropriate bus interface.
37
38	  If unsure, say N.
39
40config MMC_SDHCI_IO_ACCESSORS
41	bool
42	depends on MMC_SDHCI
43	help
44	  This is silent Kconfig symbol that is selected by the drivers that
45	  need to overwrite SDHCI IO memory accessors.
46
47config MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
48	bool
49	select MMC_SDHCI_IO_ACCESSORS
50	help
51	  This option is selected by drivers running on big endian hosts
52	  and performing I/O to a SDHCI controller through a bus that
53	  implements a hardware byte swapper using a 32-bit datum.
54	  This endian mapping mode is called "data invariance" and
55	  has the effect of scrambling the addresses and formats of data
56	  accessed in sizes other than the datum size.
57
58	  This is the case for the Freescale eSDHC and Nintendo Wii SDHCI.
59
60config MMC_SDHCI_PCI
61	tristate "SDHCI support on PCI bus"
62	depends on MMC_SDHCI && PCI
63	help
64	  This selects the PCI Secure Digital Host Controller Interface.
65	  Most controllers found today are PCI devices.
66
67	  If you have a controller with this interface, say Y or M here.
68
69	  If unsure, say N.
70
71config MMC_RICOH_MMC
72	bool "Ricoh MMC Controller Disabler"
73	depends on MMC_SDHCI_PCI
74	help
75	  This adds a pci quirk to disable Ricoh MMC Controller. This
76	  proprietary controller is unnecessary because the SDHCI driver
77	  supports MMC cards on the SD controller, but if it is not
78	  disabled, it will steal the MMC cards away - rendering them
79	  useless. It is safe to select this even if you don't
80	  have a Ricoh based card reader.
81
82	  If unsure, say Y.
83
84config MMC_SDHCI_ACPI
85	tristate "SDHCI support for ACPI enumerated SDHCI controllers"
86	depends on MMC_SDHCI && ACPI
87	help
88	  This selects support for ACPI enumerated SDHCI controllers,
89	  identified by ACPI Compatibility ID PNP0D40 or specific
90	  ACPI Hardware IDs.
91
92	  If you have a controller with this interface, say Y or M here.
93
94	  If unsure, say N.
95
96config MMC_SDHCI_PLTFM
97	tristate "SDHCI platform and OF driver helper"
98	depends on MMC_SDHCI
99	help
100	  This selects the common helper functions support for Secure Digital
101	  Host Controller Interface based platform and OF drivers.
102
103	  If you have a controller with this interface, say Y or M here.
104
105	  If unsure, say N.
106
107config MMC_SDHCI_OF_ARASAN
108	tristate "SDHCI OF support for the Arasan SDHCI controllers"
109	depends on MMC_SDHCI_PLTFM
110	depends on OF
111	help
112	  This selects the Arasan Secure Digital Host Controller Interface
113	  (SDHCI). This hardware is found e.g. in Xilinx' Zynq SoC.
114
115	  If you have a controller with this interface, say Y or M here.
116
117	  If unsure, say N.
118
119config MMC_SDHCI_OF_ESDHC
120	tristate "SDHCI OF support for the Freescale eSDHC controller"
121	depends on MMC_SDHCI_PLTFM
122	depends on PPC_OF
123	select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
124	help
125	  This selects the Freescale eSDHC controller support.
126
127	  If you have a controller with this interface, say Y or M here.
128
129	  If unsure, say N.
130
131config MMC_SDHCI_OF_HLWD
132	tristate "SDHCI OF support for the Nintendo Wii SDHCI controllers"
133	depends on MMC_SDHCI_PLTFM
134	depends on PPC_OF
135	select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
136	help
137	  This selects the Secure Digital Host Controller Interface (SDHCI)
138	  found in the "Hollywood" chipset of the Nintendo Wii video game
139	  console.
140
141	  If you have a controller with this interface, say Y or M here.
142
143	  If unsure, say N.
144
145config MMC_SDHCI_CNS3XXX
146	tristate "SDHCI support on the Cavium Networks CNS3xxx SoC"
147	depends on ARCH_CNS3XXX
148	depends on MMC_SDHCI_PLTFM
149	help
150	  This selects the SDHCI support for CNS3xxx System-on-Chip devices.
151
152	  If you have a controller with this interface, say Y or M here.
153
154	  If unsure, say N.
155
156config MMC_SDHCI_ESDHC_IMX
157	tristate "SDHCI support for the Freescale eSDHC/uSDHC i.MX controller"
158	depends on ARCH_MXC
159	depends on MMC_SDHCI_PLTFM
160	select MMC_SDHCI_IO_ACCESSORS
161	help
162	  This selects the Freescale eSDHC/uSDHC controller support
163	  found on i.MX25, i.MX35 i.MX5x and i.MX6x.
164
165	  If you have a controller with this interface, say Y or M here.
166
167	  If unsure, say N.
168
169config MMC_SDHCI_DOVE
170	tristate "SDHCI support on Marvell's Dove SoC"
171	depends on ARCH_DOVE || MACH_DOVE
172	depends on MMC_SDHCI_PLTFM
173	select MMC_SDHCI_IO_ACCESSORS
174	help
175	  This selects the Secure Digital Host Controller Interface in
176	  Marvell's Dove SoC.
177
178	  If you have a controller with this interface, say Y or M here.
179
180	  If unsure, say N.
181
182config MMC_SDHCI_TEGRA
183	tristate "SDHCI platform support for the Tegra SD/MMC Controller"
184	depends on ARCH_TEGRA
185	depends on MMC_SDHCI_PLTFM
186	select MMC_SDHCI_IO_ACCESSORS
187	help
188	  This selects the Tegra SD/MMC controller. If you have a Tegra
189	  platform with SD or MMC devices, say Y or M here.
190
191	  If unsure, say N.
192
193config MMC_SDHCI_S3C
194	tristate "SDHCI support on Samsung S3C SoC"
195	depends on MMC_SDHCI && PLAT_SAMSUNG
196	help
197	  This selects the Secure Digital Host Controller Interface (SDHCI)
198	  often referrered to as the HSMMC block in some of the Samsung S3C
199	  range of SoC.
200
201	  If you have a controller with this interface, say Y or M here.
202
203	  If unsure, say N.
204
205config MMC_SDHCI_SIRF
206	tristate "SDHCI support on CSR SiRFprimaII and SiRFmarco SoCs"
207	depends on ARCH_SIRF
208	depends on MMC_SDHCI_PLTFM
209	help
210	  This selects the SDHCI support for SiRF System-on-Chip devices.
211
212	  If you have a controller with this interface, say Y or M here.
213
214	  If unsure, say N.
215
216config MMC_SDHCI_PXAV3
217	tristate "Marvell MMP2 SD Host Controller support (PXAV3)"
218	depends on CLKDEV_LOOKUP
219	depends on MMC_SDHCI_PLTFM
220	default CPU_MMP2
221	help
222	  This selects the Marvell(R) PXAV3 SD Host Controller.
223	  If you have a MMP2 platform with SD Host Controller
224	  and a card slot, say Y or M here.
225
226	  If unsure, say N.
227
228config MMC_SDHCI_PXAV2
229	tristate "Marvell PXA9XX SD Host Controller support (PXAV2)"
230	depends on CLKDEV_LOOKUP
231	depends on MMC_SDHCI_PLTFM
232	default CPU_PXA910
233	help
234	  This selects the Marvell(R) PXAV2 SD Host Controller.
235	  If you have a PXA9XX platform with SD Host Controller
236	  and a card slot, say Y or M here.
237
238	  If unsure, say N.
239
240config MMC_SDHCI_SPEAR
241	tristate "SDHCI support on ST SPEAr platform"
242	depends on MMC_SDHCI && PLAT_SPEAR
243	help
244	  This selects the Secure Digital Host Controller Interface (SDHCI)
245	  often referrered to as the HSMMC block in some of the ST SPEAR range
246	  of SoC
247
248	  If you have a controller with this interface, say Y or M here.
249
250	  If unsure, say N.
251
252config MMC_SDHCI_S3C_DMA
253	bool "DMA support on S3C SDHCI"
254	depends on MMC_SDHCI_S3C
255	help
256	  Enable DMA support on the Samsung S3C SDHCI glue. The DMA
257	  has proved to be problematic if the controller encounters
258	  certain errors, and thus should be treated with care.
259
260	  YMMV.
261
262config MMC_SDHCI_BCM_KONA
263	tristate "SDHCI support on Broadcom KONA platform"
264	depends on ARCH_BCM_MOBILE
265	depends on MMC_SDHCI_PLTFM
266	help
267	  This selects the Broadcom Kona Secure Digital Host Controller
268	  Interface(SDHCI) support.
269	  This is used in Broadcom mobile SoCs.
270
271	  If you have a controller with this interface, say Y or M here.
272
273config MMC_SDHCI_BCM2835
274	tristate "SDHCI platform support for the BCM2835 SD/MMC Controller"
275	depends on ARCH_BCM2835
276	depends on MMC_SDHCI_PLTFM
277	select MMC_SDHCI_IO_ACCESSORS
278	help
279	  This selects the BCM2835 SD/MMC controller. If you have a BCM2835
280	  platform with SD or MMC devices, say Y or M here.
281
282	  If unsure, say N.
283
284config MMC_MOXART
285	tristate "MOXART SD/MMC Host Controller support"
286	depends on ARCH_MOXART && MMC
287	help
288	  This selects support for the MOXART SD/MMC Host Controller.
289	  MOXA provides one multi-functional card reader which can
290	  be found on some embedded hardware such as UC-7112-LX.
291	  If you have a controller with this interface, say Y here.
292
293config MMC_OMAP
294	tristate "TI OMAP Multimedia Card Interface support"
295	depends on ARCH_OMAP
296	depends on TPS65010 || !MACH_OMAP_H2
297	help
298	  This selects the TI OMAP Multimedia card Interface.
299	  If you have an OMAP board with a Multimedia Card slot,
300	  say Y or M here.
301
302	  If unsure, say N.
303
304config MMC_OMAP_HS
305	tristate "TI OMAP High Speed Multimedia Card Interface support"
306	depends on ARCH_OMAP2PLUS || COMPILE_TEST
307	help
308	  This selects the TI OMAP High Speed Multimedia card Interface.
309	  If you have an omap2plus board with a Multimedia Card slot,
310	  say Y or M here.
311
312	  If unsure, say N.
313
314config MMC_WBSD
315	tristate "Winbond W83L51xD SD/MMC Card Interface support"
316	depends on ISA_DMA_API
317	help
318	  This selects the Winbond(R) W83L51xD Secure digital and
319          Multimedia card Interface.
320	  If you have a machine with a integrated W83L518D or W83L519D
321	  SD/MMC card reader, say Y or M here.
322
323	  If unsure, say N.
324
325config MMC_AU1X
326	tristate "Alchemy AU1XX0 MMC Card Interface support"
327	depends on MIPS_ALCHEMY
328	help
329	  This selects the AMD Alchemy(R) Multimedia card interface.
330	  If you have a Alchemy platform with a MMC slot, say Y or M here.
331
332	  If unsure, say N.
333
334config MMC_ATMELMCI
335	tristate "Atmel SD/MMC Driver (Multimedia Card Interface)"
336	depends on AVR32 || ARCH_AT91
337	help
338	  This selects the Atmel Multimedia Card Interface driver. If
339	  you have an AT32 (AVR32) or AT91 platform with a Multimedia
340	  Card slot, say Y or M here.
341
342	  If unsure, say N.
343
344config MMC_SDHCI_MSM
345	tristate "Qualcomm SDHCI Controller Support"
346	depends on ARCH_QCOM
347	depends on MMC_SDHCI_PLTFM
348	help
349	  This selects the Secure Digital Host Controller Interface (SDHCI)
350	  support present in Qualcomm SOCs. The controller supports
351	  SD/MMC/SDIO devices.
352
353	  If you have a controller with this interface, say Y or M here.
354
355	  If unsure, say N.
356
357config MMC_MSM
358	tristate "Qualcomm SDCC Controller Support"
359	depends on MMC && (ARCH_MSM7X00A || ARCH_MSM7X30 || ARCH_QSD8X50)
360	help
361	  This provides support for the SD/MMC cell found in the
362	  MSM and QSD SOCs from Qualcomm. The controller also has
363	  support for SDIO devices.
364
365config MMC_MXC
366	tristate "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
367	depends on ARCH_MXC || PPC_MPC512x
368	help
369	  This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
370	  Multimedia Card Interface. If you have an i.MX or MPC512x platform
371	  with a Multimedia Card slot, say Y or M here.
372
373	  If unsure, say N.
374
375config MMC_MXS
376	tristate "Freescale MXS Multimedia Card Interface support"
377	depends on ARCH_MXS && MXS_DMA
378	help
379	  This selects the Freescale SSP MMC controller found on MXS based
380	  platforms like mx23/28.
381
382	  If unsure, say N.
383
384config MMC_TIFM_SD
385	tristate "TI Flash Media MMC/SD Interface support"
386	depends on PCI
387	select TIFM_CORE
388	help
389	  Say Y here if you want to be able to access MMC/SD cards with
390	  the Texas Instruments(R) Flash Media card reader, found in many
391	  laptops.
392	  This option 'selects' (turns on, enables) 'TIFM_CORE', but you
393	  probably also need appropriate card reader host adapter, such as
394	  'Misc devices: TI Flash Media PCI74xx/PCI76xx host adapter support
395	  (TIFM_7XX1)'.
396
397          To compile this driver as a module, choose M here: the
398	  module will be called tifm_sd.
399
400config MMC_MVSDIO
401	tristate "Marvell MMC/SD/SDIO host driver"
402	depends on PLAT_ORION
403	---help---
404	  This selects the Marvell SDIO host driver.
405	  SDIO may currently be found on the Kirkwood 88F6281 and 88F6192
406	  SoC controllers.
407
408	  To compile this driver as a module, choose M here: the
409	  module will be called mvsdio.
410
411config MMC_DAVINCI
412        tristate "TI DAVINCI Multimedia Card Interface support"
413        depends on ARCH_DAVINCI
414        help
415          This selects the TI DAVINCI Multimedia card Interface.
416          If you have an DAVINCI board with a Multimedia Card slot,
417          say Y or M here.  If unsure, say N.
418
419config MMC_GOLDFISH
420	tristate "goldfish qemu Multimedia Card Interface support"
421	depends on GOLDFISH
422	help
423	  This selects the Goldfish Multimedia card Interface emulation
424	  found on the Goldfish Android virtual device emulation.
425
426config MMC_SPI
427	tristate "MMC/SD/SDIO over SPI"
428	depends on SPI_MASTER && !HIGHMEM && HAS_DMA
429	select CRC7
430	select CRC_ITU_T
431	help
432	  Some systems access MMC/SD/SDIO cards using a SPI controller
433	  instead of using a "native" MMC/SD/SDIO controller.  This has a
434	  disadvantage of being relatively high overhead, but a compensating
435	  advantage of working on many systems without dedicated MMC/SD/SDIO
436	  controllers.
437
438	  If unsure, or if your system has no SPI master driver, say N.
439
440config MMC_S3C
441	tristate "Samsung S3C SD/MMC Card Interface support"
442	depends on ARCH_S3C24XX
443	help
444	  This selects a driver for the MCI interface found in
445          Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs.
446	  If you have a board based on one of those and a MMC/SD
447	  slot, say Y or M here.
448
449	  If unsure, say N.
450
451config MMC_S3C_HW_SDIO_IRQ
452       bool "Hardware support for SDIO IRQ"
453       depends on MMC_S3C
454       help
455         Enable the hardware support for SDIO interrupts instead of using
456	 the generic polling code.
457
458choice
459	prompt "Samsung S3C SD/MMC transfer code"
460	depends on MMC_S3C
461
462config MMC_S3C_PIO
463	bool "Use PIO transfers only"
464	help
465	  Use PIO to transfer data between memory and the hardware.
466
467	  PIO is slower than DMA as it requires CPU instructions to
468	  move the data. This has been the traditional default for
469	  the S3C MCI driver.
470
471config MMC_S3C_DMA
472	bool "Use DMA transfers only"
473	help
474	  Use DMA to transfer data between memory and the hardare.
475
476	  Currently, the DMA support in this driver seems to not be
477	  working properly and needs to be debugged before this
478	  option is useful.
479
480config MMC_S3C_PIODMA
481	bool "Support for both PIO and DMA"
482	help
483	  Compile both the PIO and DMA transfer routines into the
484	  driver and let the platform select at run-time which one
485	  is best.
486
487	  See notes for the DMA option.
488
489endchoice
490
491config MMC_SDRICOH_CS
492	tristate "MMC/SD driver for Ricoh Bay1Controllers"
493	depends on PCI && PCMCIA
494	help
495	  Say Y here if your Notebook reports a Ricoh Bay1Controller PCMCIA
496	  card whenever you insert a MMC or SD card into the card slot.
497
498	  To compile this driver as a module, choose M here: the
499	  module will be called sdricoh_cs.
500
501config MMC_TMIO_CORE
502	tristate
503
504config MMC_TMIO
505	tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
506	depends on MFD_TMIO || MFD_ASIC3
507	select MMC_TMIO_CORE
508	help
509	  This provides support for the SD/MMC cell found in TC6393XB,
510	  T7L66XB and also HTC ASIC3
511
512config MMC_SDHI
513	tristate "SH-Mobile SDHI SD/SDIO controller support"
514	depends on SUPERH || ARM
515	depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
516	select MMC_TMIO_CORE
517	help
518	  This provides support for the SDHI SD/SDIO controller found in
519	  SuperH and ARM SH-Mobile SoCs
520
521config MMC_CB710
522	tristate "ENE CB710 MMC/SD Interface support"
523	depends on PCI
524	select CB710_CORE
525	help
526	  This option enables support for MMC/SD part of ENE CB710/720 Flash
527	  memory card reader found in some laptops (ie. some versions of
528	  HP Compaq nx9500).
529
530	  This driver can also be built as a module. If so, the module
531	  will be called cb710-mmc.
532
533config MMC_VIA_SDMMC
534	tristate "VIA SD/MMC Card Reader Driver"
535	depends on PCI
536	help
537	  This selects the VIA SD/MMC Card Reader driver, say Y or M here.
538	  VIA provides one multi-functional card reader which integrated into
539	  some motherboards manufactured by VIA. This card reader supports
540	  SD/MMC/SDHC.
541	  If you have a controller with this interface, say Y or M here.
542
543	  If unsure, say N.
544
545config SDH_BFIN
546	tristate "Blackfin Secure Digital Host support"
547	depends on (BF54x && !BF544) || (BF51x && !BF512)
548	help
549	  If you say yes here you will get support for the Blackfin on-chip
550	  Secure Digital Host interface.  This includes support for MMC and
551	  SD cards.
552
553	  To compile this driver as a module, choose M here: the
554	  module will be called bfin_sdh.
555
556	  If unsure, say N.
557
558config SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND
559	bool "Blackfin EZkit Missing SDH_CMD Pull Up Resistor Workaround"
560	depends on SDH_BFIN
561	help
562	  If you say yes here SD-Cards may work on the EZkit.
563
564config MMC_DW
565	tristate "Synopsys DesignWare Memory Card Interface"
566	depends on ARC || ARM
567	help
568	  This selects support for the Synopsys DesignWare Mobile Storage IP
569	  block, this provides host support for SD and MMC interfaces, in both
570	  PIO and external DMA modes.
571
572config MMC_DW_IDMAC
573	bool "Internal DMAC interface"
574	depends on MMC_DW
575	help
576	  This selects support for the internal DMAC block within the Synopsys
577	  Designware Mobile Storage IP block. This disables the external DMA
578	  interface.
579
580config MMC_DW_PLTFM
581	tristate "Synopsys Designware MCI Support as platform device"
582	depends on MMC_DW
583	default y
584	help
585	  This selects the common helper functions support for Host Controller
586	  Interface based platform driver. Please select this option if the IP
587	  is present as a platform device. This is the common interface for the
588	  Synopsys Designware IP.
589
590	  If you have a controller with this interface, say Y or M here.
591
592	  If unsure, say Y.
593
594config MMC_DW_EXYNOS
595	tristate "Exynos specific extensions for Synopsys DW Memory Card Interface"
596	depends on MMC_DW
597	select MMC_DW_PLTFM
598	help
599	  This selects support for Samsung Exynos SoC specific extensions to the
600	  Synopsys DesignWare Memory Card Interface driver. Select this option
601	  for platforms based on Exynos4 and Exynos5 SoC's.
602
603config MMC_DW_K3
604	tristate "K3 specific extensions for Synopsys DW Memory Card Interface"
605	depends on MMC_DW
606	select MMC_DW_PLTFM
607	select MMC_DW_IDMAC
608	help
609	  This selects support for Hisilicon K3 SoC specific extensions to the
610	  Synopsys DesignWare Memory Card Interface driver. Select this option
611	  for platforms based on Hisilicon K3 SoC's.
612
613config MMC_DW_PCI
614	tristate "Synopsys Designware MCI support on PCI bus"
615	depends on MMC_DW && PCI
616	help
617	  This selects the PCI bus for the Synopsys Designware Mobile Storage IP.
618	  Select this option if the IP is present on PCI platform.
619
620	  If you have a controller with this interface, say Y or M here.
621
622	  If unsure, say N.
623
624config MMC_SH_MMCIF
625	tristate "SuperH Internal MMCIF support"
626	depends on MMC_BLOCK
627	depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
628	help
629	  This selects the MMC Host Interface controller (MMCIF).
630
631	  This driver supports MMCIF in sh7724/sh7757/sh7372.
632
633config MMC_JZ4740
634	tristate "JZ4740 SD/Multimedia Card Interface support"
635	depends on MACH_JZ4740
636	help
637	  This selects support for the SD/MMC controller on Ingenic JZ4740
638	  SoCs.
639	  If you have a board based on such a SoC and with a SD/MMC slot,
640	  say Y or M here.
641
642config MMC_VUB300
643	tristate "VUB300 USB to SDIO/SD/MMC Host Controller support"
644	depends on USB
645	help
646	  This selects support for Elan Digital Systems' VUB300 chip.
647
648	  The VUB300 is a USB-SDIO Host Controller Interface chip
649	  that enables the host computer to use SDIO/SD/MMC cards
650	  via a USB 2.0 or USB 1.1 host.
651
652	  The VUB300 chip will be found in both physically separate
653	  USB to SDIO/SD/MMC adapters and embedded on some motherboards.
654
655	  The VUB300 chip supports SD and MMC memory cards in addition
656	  to single and multifunction SDIO cards.
657
658	  Some SDIO cards will need a firmware file to be loaded and
659	  sent to VUB300 chip in order to achieve better data throughput.
660	  Download these "Offload Pseudocode" from Elan Digital Systems'
661	  web-site http://www.elandigitalsystems.com/support/downloads.php
662	  and put them in /lib/firmware. Note that without these additional
663	  firmware files the VUB300 chip will still function, but not at
664	  the best obtainable data rate.
665
666	  To compile this mmc host controller driver as a module,
667	  choose M here: the module will be called vub300.
668
669	  If you have a computer with an embedded VUB300 chip
670	  or if you intend connecting a USB adapter based on a
671	  VUB300 chip say Y or M here.
672
673config MMC_USHC
674	tristate "USB SD Host Controller (USHC) support"
675	depends on USB
676	help
677	  This selects support for USB SD Host Controllers based on
678	  the Cypress Astoria chip with firmware compliant with CSR's
679	  USB SD Host Controller specification (CS-118793-SP).
680
681	  CSR boards with this device include: USB<>SDIO (M1985v2),
682	  and Ultrasira.
683
684	  Note: These controllers only support SDIO cards and do not
685	  support MMC or SD memory cards.
686
687config MMC_WMT
688	tristate "Wondermedia SD/MMC Host Controller support"
689	depends on ARCH_VT8500
690	default y
691	help
692	  This selects support for the SD/MMC Host Controller on
693	  Wondermedia WM8505/WM8650 based SoCs.
694
695	  To compile this driver as a module, choose M here: the
696	  module will be called wmt-sdmmc.
697
698config MMC_USDHI6ROL0
699	tristate "Renesas USDHI6ROL0 SD/SDIO Host Controller support"
700	help
701	  This selects support for the Renesas USDHI6ROL0 SD/SDIO
702	  Host Controller
703
704config MMC_REALTEK_PCI
705	tristate "Realtek PCI-E SD/MMC Card Interface Driver"
706	depends on MFD_RTSX_PCI
707	help
708	  Say Y here to include driver code to support SD/MMC card interface
709	  of Realtek PCI-E card reader
710
711config MMC_REALTEK_USB
712	tristate "Realtek USB SD/MMC Card Interface Driver"
713	depends on MFD_RTSX_USB
714	help
715	  Say Y here to include driver code to support SD/MMC card interface
716	  of Realtek RTS5129/39 series card reader
717
718config MMC_SUNXI
719	tristate "Allwinner sunxi SD/MMC Host Controller support"
720	depends on ARCH_SUNXI
721	help
722	  This selects support for the SD/MMC Host Controller on
723	  Allwinner sunxi SoCs.
724