xref: /openbmc/linux/drivers/mmc/host/Kconfig (revision ca79522c)
1#
2# MMC/SD host controller drivers
3#
4
5comment "MMC/SD/SDIO Host Controller Drivers"
6
7config MMC_ARMMMCI
8	tristate "ARM AMBA Multimedia Card Interface support"
9	depends on ARM_AMBA
10	help
11	  This selects the ARM(R) AMBA(R) PrimeCell Multimedia Card
12	  Interface (PL180 and PL181) support.  If you have an ARM(R)
13	  platform with a Multimedia Card slot, say Y or M here.
14
15	  If unsure, say N.
16
17config MMC_PXA
18	tristate "Intel PXA25x/26x/27x Multimedia Card Interface support"
19	depends on ARCH_PXA
20	help
21	  This selects the Intel(R) PXA(R) Multimedia card Interface.
22	  If you have a PXA(R) platform with a Multimedia Card slot,
23	  say Y or M here.
24
25	  If unsure, say N.
26
27config MMC_SDHCI
28	tristate "Secure Digital Host Controller Interface support"
29	depends on HAS_DMA
30	help
31	  This selects the generic Secure Digital Host Controller Interface.
32	  It is used by manufacturers such as Texas Instruments(R), Ricoh(R)
33	  and Toshiba(R). Most controllers found in laptops are of this type.
34
35	  If you have a controller with this interface, say Y or M here. You
36	  also need to enable an appropriate bus interface.
37
38	  If unsure, say N.
39
40config MMC_SDHCI_IO_ACCESSORS
41	bool
42	depends on MMC_SDHCI
43	help
44	  This is silent Kconfig symbol that is selected by the drivers that
45	  need to overwrite SDHCI IO memory accessors.
46
47config MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
48	bool
49	select MMC_SDHCI_IO_ACCESSORS
50	help
51	  This option is selected by drivers running on big endian hosts
52	  and performing I/O to a SDHCI controller through a bus that
53	  implements a hardware byte swapper using a 32-bit datum.
54	  This endian mapping mode is called "data invariance" and
55	  has the effect of scrambling the addresses and formats of data
56	  accessed in sizes other than the datum size.
57
58	  This is the case for the Freescale eSDHC and Nintendo Wii SDHCI.
59
60config MMC_SDHCI_PCI
61	tristate "SDHCI support on PCI bus"
62	depends on MMC_SDHCI && PCI
63	help
64	  This selects the PCI Secure Digital Host Controller Interface.
65	  Most controllers found today are PCI devices.
66
67	  If you have a controller with this interface, say Y or M here.
68
69	  If unsure, say N.
70
71config MMC_RICOH_MMC
72	bool "Ricoh MMC Controller Disabler"
73	depends on MMC_SDHCI_PCI
74	help
75	  This adds a pci quirk to disable Ricoh MMC Controller. This
76	  proprietary controller is unnecessary because the SDHCI driver
77	  supports MMC cards on the SD controller, but if it is not
78	  disabled, it will steal the MMC cards away - rendering them
79	  useless. It is safe to select this even if you don't
80	  have a Ricoh based card reader.
81
82	  If unsure, say Y.
83
84config MMC_SDHCI_ACPI
85	tristate "SDHCI support for ACPI enumerated SDHCI controllers"
86	depends on MMC_SDHCI && ACPI
87	help
88	  This selects support for ACPI enumerated SDHCI controllers,
89	  identified by ACPI Compatibility ID PNP0D40 or specific
90	  ACPI Hardware IDs.
91
92	  If you have a controller with this interface, say Y or M here.
93
94	  If unsure, say N.
95
96config MMC_SDHCI_PLTFM
97	tristate "SDHCI platform and OF driver helper"
98	depends on MMC_SDHCI
99	help
100	  This selects the common helper functions support for Secure Digital
101	  Host Controller Interface based platform and OF drivers.
102
103	  If you have a controller with this interface, say Y or M here.
104
105	  If unsure, say N.
106
107config MMC_SDHCI_OF_ESDHC
108	tristate "SDHCI OF support for the Freescale eSDHC controller"
109	depends on MMC_SDHCI_PLTFM
110	depends on PPC_OF
111	select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
112	help
113	  This selects the Freescale eSDHC controller support.
114
115	  If you have a controller with this interface, say Y or M here.
116
117	  If unsure, say N.
118
119config MMC_SDHCI_OF_HLWD
120	tristate "SDHCI OF support for the Nintendo Wii SDHCI controllers"
121	depends on MMC_SDHCI_PLTFM
122	depends on PPC_OF
123	select MMC_SDHCI_BIG_ENDIAN_32BIT_BYTE_SWAPPER
124	help
125	  This selects the Secure Digital Host Controller Interface (SDHCI)
126	  found in the "Hollywood" chipset of the Nintendo Wii video game
127	  console.
128
129	  If you have a controller with this interface, say Y or M here.
130
131	  If unsure, say N.
132
133config MMC_SDHCI_CNS3XXX
134	tristate "SDHCI support on the Cavium Networks CNS3xxx SoC"
135	depends on ARCH_CNS3XXX
136	depends on MMC_SDHCI_PLTFM
137	help
138	  This selects the SDHCI support for CNS3xxx System-on-Chip devices.
139
140	  If you have a controller with this interface, say Y or M here.
141
142	  If unsure, say N.
143
144config MMC_SDHCI_ESDHC_IMX
145	tristate "SDHCI support for the Freescale eSDHC/uSDHC i.MX controller"
146	depends on ARCH_MXC
147	depends on MMC_SDHCI_PLTFM
148	select MMC_SDHCI_IO_ACCESSORS
149	help
150	  This selects the Freescale eSDHC/uSDHC controller support
151	  found on i.MX25, i.MX35 i.MX5x and i.MX6x.
152
153	  If you have a controller with this interface, say Y or M here.
154
155	  If unsure, say N.
156
157config MMC_SDHCI_DOVE
158	tristate "SDHCI support on Marvell's Dove SoC"
159	depends on ARCH_DOVE
160	depends on MMC_SDHCI_PLTFM
161	select MMC_SDHCI_IO_ACCESSORS
162	help
163	  This selects the Secure Digital Host Controller Interface in
164	  Marvell's Dove SoC.
165
166	  If you have a controller with this interface, say Y or M here.
167
168	  If unsure, say N.
169
170config MMC_SDHCI_TEGRA
171	tristate "SDHCI platform support for the Tegra SD/MMC Controller"
172	depends on ARCH_TEGRA
173	depends on MMC_SDHCI_PLTFM
174	select MMC_SDHCI_IO_ACCESSORS
175	help
176	  This selects the Tegra SD/MMC controller. If you have a Tegra
177	  platform with SD or MMC devices, say Y or M here.
178
179	  If unsure, say N.
180
181config MMC_SDHCI_S3C
182	tristate "SDHCI support on Samsung S3C SoC"
183	depends on MMC_SDHCI && PLAT_SAMSUNG
184	help
185	  This selects the Secure Digital Host Controller Interface (SDHCI)
186	  often referrered to as the HSMMC block in some of the Samsung S3C
187	  range of SoC.
188
189	  If you have a controller with this interface, say Y or M here.
190
191	  If unsure, say N.
192
193config MMC_SDHCI_SIRF
194	tristate "SDHCI support on CSR SiRFprimaII and SiRFmarco SoCs"
195	depends on ARCH_SIRF
196	depends on MMC_SDHCI_PLTFM
197	help
198	  This selects the SDHCI support for SiRF System-on-Chip devices.
199
200	  If you have a controller with this interface, say Y or M here.
201
202	  If unsure, say N.
203
204config MMC_SDHCI_PXAV3
205	tristate "Marvell MMP2 SD Host Controller support (PXAV3)"
206	depends on CLKDEV_LOOKUP
207	select MMC_SDHCI
208	select MMC_SDHCI_PLTFM
209	default CPU_MMP2
210	help
211	  This selects the Marvell(R) PXAV3 SD Host Controller.
212	  If you have a MMP2 platform with SD Host Controller
213	  and a card slot, say Y or M here.
214
215	  If unsure, say N.
216
217config MMC_SDHCI_PXAV2
218	tristate "Marvell PXA9XX SD Host Controller support (PXAV2)"
219	depends on CLKDEV_LOOKUP
220	select MMC_SDHCI
221	select MMC_SDHCI_PLTFM
222	default CPU_PXA910
223	help
224	  This selects the Marvell(R) PXAV2 SD Host Controller.
225	  If you have a PXA9XX platform with SD Host Controller
226	  and a card slot, say Y or M here.
227
228	  If unsure, say N.
229
230config MMC_SDHCI_SPEAR
231	tristate "SDHCI support on ST SPEAr platform"
232	depends on MMC_SDHCI && PLAT_SPEAR
233	help
234	  This selects the Secure Digital Host Controller Interface (SDHCI)
235	  often referrered to as the HSMMC block in some of the ST SPEAR range
236	  of SoC
237
238	  If you have a controller with this interface, say Y or M here.
239
240	  If unsure, say N.
241
242config MMC_SDHCI_S3C_DMA
243	bool "DMA support on S3C SDHCI"
244	depends on MMC_SDHCI_S3C
245	help
246	  Enable DMA support on the Samsung S3C SDHCI glue. The DMA
247	  has proved to be problematic if the controller encounters
248	  certain errors, and thus should be treated with care.
249
250	  YMMV.
251
252config MMC_SDHCI_BCM2835
253	tristate "SDHCI platform support for the BCM2835 SD/MMC Controller"
254	depends on ARCH_BCM2835
255	depends on MMC_SDHCI_PLTFM
256	select MMC_SDHCI_IO_ACCESSORS
257	help
258	  This selects the BCM2835 SD/MMC controller. If you have a BCM2835
259	  platform with SD or MMC devices, say Y or M here.
260
261	  If unsure, say N.
262
263config MMC_OMAP
264	tristate "TI OMAP Multimedia Card Interface support"
265	depends on ARCH_OMAP
266	select TPS65010 if MACH_OMAP_H2
267	help
268	  This selects the TI OMAP Multimedia card Interface.
269	  If you have an OMAP board with a Multimedia Card slot,
270	  say Y or M here.
271
272	  If unsure, say N.
273
274config MMC_OMAP_HS
275	tristate "TI OMAP High Speed Multimedia Card Interface support"
276	depends on SOC_OMAP2430 || ARCH_OMAP3 || ARCH_OMAP4
277	help
278	  This selects the TI OMAP High Speed Multimedia card Interface.
279	  If you have an OMAP2430 or OMAP3 board or OMAP4 board with a
280	  Multimedia Card slot, say Y or M here.
281
282	  If unsure, say N.
283
284config MMC_WBSD
285	tristate "Winbond W83L51xD SD/MMC Card Interface support"
286	depends on ISA_DMA_API
287	help
288	  This selects the Winbond(R) W83L51xD Secure digital and
289          Multimedia card Interface.
290	  If you have a machine with a integrated W83L518D or W83L519D
291	  SD/MMC card reader, say Y or M here.
292
293	  If unsure, say N.
294
295config MMC_AU1X
296	tristate "Alchemy AU1XX0 MMC Card Interface support"
297	depends on MIPS_ALCHEMY
298	help
299	  This selects the AMD Alchemy(R) Multimedia card interface.
300	  If you have a Alchemy platform with a MMC slot, say Y or M here.
301
302	  If unsure, say N.
303
304config MMC_ATMELMCI
305	tristate "Atmel SD/MMC Driver (Multimedia Card Interface)"
306	depends on AVR32 || ARCH_AT91
307	help
308	  This selects the Atmel Multimedia Card Interface driver. If
309	  you have an AT32 (AVR32) or AT91 platform with a Multimedia
310	  Card slot, say Y or M here.
311
312	  If unsure, say N.
313
314config MMC_MSM
315	tristate "Qualcomm SDCC Controller Support"
316	depends on MMC && ARCH_MSM
317	help
318	  This provides support for the SD/MMC cell found in the
319	  MSM and QSD SOCs from Qualcomm. The controller also has
320	  support for SDIO devices.
321
322config MMC_MXC
323	tristate "Freescale i.MX21/27/31 or MPC512x Multimedia Card support"
324	depends on ARCH_MXC || PPC_MPC512x
325	help
326	  This selects the Freescale i.MX21, i.MX27, i.MX31 or MPC512x
327	  Multimedia Card Interface. If you have an i.MX or MPC512x platform
328	  with a Multimedia Card slot, say Y or M here.
329
330	  If unsure, say N.
331
332config MMC_MXS
333	tristate "Freescale MXS Multimedia Card Interface support"
334	depends on ARCH_MXS && MXS_DMA
335	help
336	  This selects the Freescale SSP MMC controller found on MXS based
337	  platforms like mx23/28.
338
339	  If unsure, say N.
340
341config MMC_TIFM_SD
342	tristate "TI Flash Media MMC/SD Interface support"
343	depends on PCI
344	select TIFM_CORE
345	help
346	  Say Y here if you want to be able to access MMC/SD cards with
347	  the Texas Instruments(R) Flash Media card reader, found in many
348	  laptops.
349	  This option 'selects' (turns on, enables) 'TIFM_CORE', but you
350	  probably also need appropriate card reader host adapter, such as
351	  'Misc devices: TI Flash Media PCI74xx/PCI76xx host adapter support
352	  (TIFM_7XX1)'.
353
354          To compile this driver as a module, choose M here: the
355	  module will be called tifm_sd.
356
357config MMC_MVSDIO
358	tristate "Marvell MMC/SD/SDIO host driver"
359	depends on PLAT_ORION
360	---help---
361	  This selects the Marvell SDIO host driver.
362	  SDIO may currently be found on the Kirkwood 88F6281 and 88F6192
363	  SoC controllers.
364
365	  To compile this driver as a module, choose M here: the
366	  module will be called mvsdio.
367
368config MMC_DAVINCI
369        tristate "TI DAVINCI Multimedia Card Interface support"
370        depends on ARCH_DAVINCI
371        help
372          This selects the TI DAVINCI Multimedia card Interface.
373          If you have an DAVINCI board with a Multimedia Card slot,
374          say Y or M here.  If unsure, say N.
375
376config MMC_GOLDFISH
377	tristate "goldfish qemu Multimedia Card Interface support"
378	depends on GOLDFISH
379	help
380	  This selects the Goldfish Multimedia card Interface emulation
381	  found on the Goldfish Android virtual device emulation.
382
383config MMC_SPI
384	tristate "MMC/SD/SDIO over SPI"
385	depends on SPI_MASTER && !HIGHMEM && HAS_DMA
386	select CRC7
387	select CRC_ITU_T
388	help
389	  Some systems access MMC/SD/SDIO cards using a SPI controller
390	  instead of using a "native" MMC/SD/SDIO controller.  This has a
391	  disadvantage of being relatively high overhead, but a compensating
392	  advantage of working on many systems without dedicated MMC/SD/SDIO
393	  controllers.
394
395	  If unsure, or if your system has no SPI master driver, say N.
396
397config MMC_S3C
398	tristate "Samsung S3C SD/MMC Card Interface support"
399	depends on ARCH_S3C24XX
400	help
401	  This selects a driver for the MCI interface found in
402          Samsung's S3C2410, S3C2412, S3C2440, S3C2442 CPUs.
403	  If you have a board based on one of those and a MMC/SD
404	  slot, say Y or M here.
405
406	  If unsure, say N.
407
408config MMC_S3C_HW_SDIO_IRQ
409       bool "Hardware support for SDIO IRQ"
410       depends on MMC_S3C
411       help
412         Enable the hardware support for SDIO interrupts instead of using
413	 the generic polling code.
414
415choice
416	prompt "Samsung S3C SD/MMC transfer code"
417	depends on MMC_S3C
418
419config MMC_S3C_PIO
420	bool "Use PIO transfers only"
421	help
422	  Use PIO to transfer data between memory and the hardware.
423
424	  PIO is slower than DMA as it requires CPU instructions to
425	  move the data. This has been the traditional default for
426	  the S3C MCI driver.
427
428config MMC_S3C_DMA
429	bool "Use DMA transfers only"
430	help
431	  Use DMA to transfer data between memory and the hardare.
432
433	  Currently, the DMA support in this driver seems to not be
434	  working properly and needs to be debugged before this
435	  option is useful.
436
437config MMC_S3C_PIODMA
438	bool "Support for both PIO and DMA"
439	help
440	  Compile both the PIO and DMA transfer routines into the
441	  driver and let the platform select at run-time which one
442	  is best.
443
444	  See notes for the DMA option.
445
446endchoice
447
448config MMC_SDRICOH_CS
449	tristate "MMC/SD driver for Ricoh Bay1Controllers"
450	depends on PCI && PCMCIA
451	help
452	  Say Y here if your Notebook reports a Ricoh Bay1Controller PCMCIA
453	  card whenever you insert a MMC or SD card into the card slot.
454
455	  To compile this driver as a module, choose M here: the
456	  module will be called sdricoh_cs.
457
458config MMC_TMIO_CORE
459	tristate
460
461config MMC_TMIO
462	tristate "Toshiba Mobile IO Controller (TMIO) MMC/SD function support"
463	depends on MFD_TMIO || MFD_ASIC3
464	select MMC_TMIO_CORE
465	help
466	  This provides support for the SD/MMC cell found in TC6393XB,
467	  T7L66XB and also HTC ASIC3
468
469config MMC_SDHI
470	tristate "SH-Mobile SDHI SD/SDIO controller support"
471	depends on SUPERH || ARCH_SHMOBILE
472	select MMC_TMIO_CORE
473	help
474	  This provides support for the SDHI SD/SDIO controller found in
475	  SuperH and ARM SH-Mobile SoCs
476
477config MMC_CB710
478	tristate "ENE CB710 MMC/SD Interface support"
479	depends on PCI && GENERIC_HARDIRQS
480	select CB710_CORE
481	help
482	  This option enables support for MMC/SD part of ENE CB710/720 Flash
483	  memory card reader found in some laptops (ie. some versions of
484	  HP Compaq nx9500).
485
486	  This driver can also be built as a module. If so, the module
487	  will be called cb710-mmc.
488
489config MMC_VIA_SDMMC
490	tristate "VIA SD/MMC Card Reader Driver"
491	depends on PCI
492	help
493	  This selects the VIA SD/MMC Card Reader driver, say Y or M here.
494	  VIA provides one multi-functional card reader which integrated into
495	  some motherboards manufactured by VIA. This card reader supports
496	  SD/MMC/SDHC.
497	  If you have a controller with this interface, say Y or M here.
498
499	  If unsure, say N.
500
501config SDH_BFIN
502	tristate "Blackfin Secure Digital Host support"
503	depends on (BF54x && !BF544) || (BF51x && !BF512)
504	help
505	  If you say yes here you will get support for the Blackfin on-chip
506	  Secure Digital Host interface.  This includes support for MMC and
507	  SD cards.
508
509	  To compile this driver as a module, choose M here: the
510	  module will be called bfin_sdh.
511
512	  If unsure, say N.
513
514config SDH_BFIN_MISSING_CMD_PULLUP_WORKAROUND
515	bool "Blackfin EZkit Missing SDH_CMD Pull Up Resistor Workaround"
516	depends on SDH_BFIN
517	help
518	  If you say yes here SD-Cards may work on the EZkit.
519
520config MMC_DW
521	tristate "Synopsys DesignWare Memory Card Interface"
522	depends on ARM
523	help
524	  This selects support for the Synopsys DesignWare Mobile Storage IP
525	  block, this provides host support for SD and MMC interfaces, in both
526	  PIO and external DMA modes.
527
528config MMC_DW_IDMAC
529	bool "Internal DMAC interface"
530	depends on MMC_DW
531	help
532	  This selects support for the internal DMAC block within the Synopsys
533	  Designware Mobile Storage IP block. This disables the external DMA
534	  interface.
535
536config MMC_DW_PLTFM
537	tristate "Synopsys Designware MCI Support as platform device"
538	depends on MMC_DW
539	default y
540	help
541	  This selects the common helper functions support for Host Controller
542	  Interface based platform driver. Please select this option if the IP
543	  is present as a platform device. This is the common interface for the
544	  Synopsys Designware IP.
545
546	  If you have a controller with this interface, say Y or M here.
547
548	  If unsure, say Y.
549
550config MMC_DW_EXYNOS
551	tristate "Exynos specific extensions for Synopsys DW Memory Card Interface"
552	depends on MMC_DW
553	select MMC_DW_PLTFM
554	help
555	  This selects support for Samsung Exynos SoC specific extensions to the
556	  Synopsys DesignWare Memory Card Interface driver. Select this option
557	  for platforms based on Exynos4 and Exynos5 SoC's.
558
559config MMC_DW_PCI
560	tristate "Synopsys Designware MCI support on PCI bus"
561	depends on MMC_DW && PCI
562	help
563	  This selects the PCI bus for the Synopsys Designware Mobile Storage IP.
564	  Select this option if the IP is present on PCI platform.
565
566	  If you have a controller with this interface, say Y or M here.
567
568	  If unsure, say N.
569
570config MMC_SH_MMCIF
571	tristate "SuperH Internal MMCIF support"
572	depends on MMC_BLOCK && (SUPERH || ARCH_SHMOBILE)
573	help
574	  This selects the MMC Host Interface controller (MMCIF).
575
576	  This driver supports MMCIF in sh7724/sh7757/sh7372.
577
578config MMC_JZ4740
579	tristate "JZ4740 SD/Multimedia Card Interface support"
580	depends on MACH_JZ4740
581	help
582	  This selects support for the SD/MMC controller on Ingenic JZ4740
583	  SoCs.
584	  If you have a board based on such a SoC and with a SD/MMC slot,
585	  say Y or M here.
586
587config MMC_VUB300
588	tristate "VUB300 USB to SDIO/SD/MMC Host Controller support"
589	depends on USB
590	help
591	  This selects support for Elan Digital Systems' VUB300 chip.
592
593	  The VUB300 is a USB-SDIO Host Controller Interface chip
594	  that enables the host computer to use SDIO/SD/MMC cards
595	  via a USB 2.0 or USB 1.1 host.
596
597	  The VUB300 chip will be found in both physically separate
598	  USB to SDIO/SD/MMC adapters and embedded on some motherboards.
599
600	  The VUB300 chip supports SD and MMC memory cards in addition
601	  to single and multifunction SDIO cards.
602
603	  Some SDIO cards will need a firmware file to be loaded and
604	  sent to VUB300 chip in order to achieve better data throughput.
605	  Download these "Offload Pseudocode" from Elan Digital Systems'
606	  web-site http://www.elandigitalsystems.com/support/downloads.php
607	  and put them in /lib/firmware. Note that without these additional
608	  firmware files the VUB300 chip will still function, but not at
609	  the best obtainable data rate.
610
611	  To compile this mmc host controller driver as a module,
612	  choose M here: the module will be called vub300.
613
614	  If you have a computer with an embedded VUB300 chip
615	  or if you intend connecting a USB adapter based on a
616	  VUB300 chip say Y or M here.
617
618config MMC_USHC
619	tristate "USB SD Host Controller (USHC) support"
620	depends on USB
621	help
622	  This selects support for USB SD Host Controllers based on
623	  the Cypress Astoria chip with firmware compliant with CSR's
624	  USB SD Host Controller specification (CS-118793-SP).
625
626	  CSR boards with this device include: USB<>SDIO (M1985v2),
627	  and Ultrasira.
628
629	  Note: These controllers only support SDIO cards and do not
630	  support MMC or SD memory cards.
631
632config MMC_WMT
633	tristate "Wondermedia SD/MMC Host Controller support"
634	depends on ARCH_VT8500
635	default y
636	help
637	  This selects support for the SD/MMC Host Controller on
638	  Wondermedia WM8505/WM8650 based SoCs.
639
640	  To compile this driver as a module, choose M here: the
641	  module will be called wmt-sdmmc.
642
643config MMC_REALTEK_PCI
644	tristate "Realtek PCI-E SD/MMC Card Interface Driver"
645	depends on MFD_RTSX_PCI
646	help
647	  Say Y here to include driver code to support SD/MMC card interface
648	  of Realtek PCI-E card reader
649