xref: /openbmc/linux/drivers/mmc/core/sdio_irq.c (revision f220d3eb) 
1 /*
2  * linux/drivers/mmc/core/sdio_irq.c
3  *
4  * Author:      Nicolas Pitre
5  * Created:     June 18, 2007
6  * Copyright:   MontaVista Software Inc.
7  *
8  * Copyright 2008 Pierre Ossman
9  *
10  * This program is free software; you can redistribute it and/or modify
11  * it under the terms of the GNU General Public License as published by
12  * the Free Software Foundation; either version 2 of the License, or (at
13  * your option) any later version.
14  */
15 
16 #include <linux/kernel.h>
17 #include <linux/sched.h>
18 #include <uapi/linux/sched/types.h>
19 #include <linux/kthread.h>
20 #include <linux/export.h>
21 #include <linux/wait.h>
22 #include <linux/delay.h>
23 
24 #include <linux/mmc/core.h>
25 #include <linux/mmc/host.h>
26 #include <linux/mmc/card.h>
27 #include <linux/mmc/sdio.h>
28 #include <linux/mmc/sdio_func.h>
29 
30 #include "sdio_ops.h"
31 #include "core.h"
32 #include "card.h"
33 
34 static int process_sdio_pending_irqs(struct mmc_host *host)
35 {
36 	struct mmc_card *card = host->card;
37 	int i, ret, count;
38 	unsigned char pending;
39 	struct sdio_func *func;
40 
41 	/*
42 	 * Optimization, if there is only 1 function interrupt registered
43 	 * and we know an IRQ was signaled then call irq handler directly.
44 	 * Otherwise do the full probe.
45 	 */
46 	func = card->sdio_single_irq;
47 	if (func && host->sdio_irq_pending) {
48 		func->irq_handler(func);
49 		return 1;
50 	}
51 
52 	ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_INTx, 0, &pending);
53 	if (ret) {
54 		pr_debug("%s: error %d reading SDIO_CCCR_INTx\n",
55 		       mmc_card_id(card), ret);
56 		return ret;
57 	}
58 
59 	if (pending && mmc_card_broken_irq_polling(card) &&
60 	    !(host->caps & MMC_CAP_SDIO_IRQ)) {
61 		unsigned char dummy;
62 
63 		/* A fake interrupt could be created when we poll SDIO_CCCR_INTx
64 		 * register with a Marvell SD8797 card. A dummy CMD52 read to
65 		 * function 0 register 0xff can avoid this.
66 		 */
67 		mmc_io_rw_direct(card, 0, 0, 0xff, 0, &dummy);
68 	}
69 
70 	count = 0;
71 	for (i = 1; i <= 7; i++) {
72 		if (pending & (1 << i)) {
73 			func = card->sdio_func[i - 1];
74 			if (!func) {
75 				pr_warn("%s: pending IRQ for non-existent function\n",
76 					mmc_card_id(card));
77 				ret = -EINVAL;
78 			} else if (func->irq_handler) {
79 				func->irq_handler(func);
80 				count++;
81 			} else {
82 				pr_warn("%s: pending IRQ with no handler\n",
83 					sdio_func_id(func));
84 				ret = -EINVAL;
85 			}
86 		}
87 	}
88 
89 	if (count)
90 		return count;
91 
92 	return ret;
93 }
94 
95 void sdio_run_irqs(struct mmc_host *host)
96 {
97 	mmc_claim_host(host);
98 	if (host->sdio_irqs) {
99 		host->sdio_irq_pending = true;
100 		process_sdio_pending_irqs(host);
101 		if (host->ops->ack_sdio_irq)
102 			host->ops->ack_sdio_irq(host);
103 	}
104 	mmc_release_host(host);
105 }
106 EXPORT_SYMBOL_GPL(sdio_run_irqs);
107 
108 void sdio_irq_work(struct work_struct *work)
109 {
110 	struct mmc_host *host =
111 		container_of(work, struct mmc_host, sdio_irq_work.work);
112 
113 	sdio_run_irqs(host);
114 }
115 
116 void sdio_signal_irq(struct mmc_host *host)
117 {
118 	queue_delayed_work(system_wq, &host->sdio_irq_work, 0);
119 }
120 EXPORT_SYMBOL_GPL(sdio_signal_irq);
121 
122 static int sdio_irq_thread(void *_host)
123 {
124 	struct mmc_host *host = _host;
125 	struct sched_param param = { .sched_priority = 1 };
126 	unsigned long period, idle_period;
127 	int ret;
128 
129 	sched_setscheduler(current, SCHED_FIFO, &param);
130 
131 	/*
132 	 * We want to allow for SDIO cards to work even on non SDIO
133 	 * aware hosts.  One thing that non SDIO host cannot do is
134 	 * asynchronous notification of pending SDIO card interrupts
135 	 * hence we poll for them in that case.
136 	 */
137 	idle_period = msecs_to_jiffies(10);
138 	period = (host->caps & MMC_CAP_SDIO_IRQ) ?
139 		MAX_SCHEDULE_TIMEOUT : idle_period;
140 
141 	pr_debug("%s: IRQ thread started (poll period = %lu jiffies)\n",
142 		 mmc_hostname(host), period);
143 
144 	do {
145 		/*
146 		 * We claim the host here on drivers behalf for a couple
147 		 * reasons:
148 		 *
149 		 * 1) it is already needed to retrieve the CCCR_INTx;
150 		 * 2) we want the driver(s) to clear the IRQ condition ASAP;
151 		 * 3) we need to control the abort condition locally.
152 		 *
153 		 * Just like traditional hard IRQ handlers, we expect SDIO
154 		 * IRQ handlers to be quick and to the point, so that the
155 		 * holding of the host lock does not cover too much work
156 		 * that doesn't require that lock to be held.
157 		 */
158 		ret = __mmc_claim_host(host, NULL,
159 				       &host->sdio_irq_thread_abort);
160 		if (ret)
161 			break;
162 		ret = process_sdio_pending_irqs(host);
163 		host->sdio_irq_pending = false;
164 		mmc_release_host(host);
165 
166 		/*
167 		 * Give other threads a chance to run in the presence of
168 		 * errors.
169 		 */
170 		if (ret < 0) {
171 			set_current_state(TASK_INTERRUPTIBLE);
172 			if (!kthread_should_stop())
173 				schedule_timeout(HZ);
174 			set_current_state(TASK_RUNNING);
175 		}
176 
177 		/*
178 		 * Adaptive polling frequency based on the assumption
179 		 * that an interrupt will be closely followed by more.
180 		 * This has a substantial benefit for network devices.
181 		 */
182 		if (!(host->caps & MMC_CAP_SDIO_IRQ)) {
183 			if (ret > 0)
184 				period /= 2;
185 			else {
186 				period++;
187 				if (period > idle_period)
188 					period = idle_period;
189 			}
190 		}
191 
192 		set_current_state(TASK_INTERRUPTIBLE);
193 		if (host->caps & MMC_CAP_SDIO_IRQ)
194 			host->ops->enable_sdio_irq(host, 1);
195 		if (!kthread_should_stop())
196 			schedule_timeout(period);
197 		set_current_state(TASK_RUNNING);
198 	} while (!kthread_should_stop());
199 
200 	if (host->caps & MMC_CAP_SDIO_IRQ)
201 		host->ops->enable_sdio_irq(host, 0);
202 
203 	pr_debug("%s: IRQ thread exiting with code %d\n",
204 		 mmc_hostname(host), ret);
205 
206 	return ret;
207 }
208 
209 static int sdio_card_irq_get(struct mmc_card *card)
210 {
211 	struct mmc_host *host = card->host;
212 
213 	WARN_ON(!host->claimed);
214 
215 	if (!host->sdio_irqs++) {
216 		if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD)) {
217 			atomic_set(&host->sdio_irq_thread_abort, 0);
218 			host->sdio_irq_thread =
219 				kthread_run(sdio_irq_thread, host,
220 					    "ksdioirqd/%s", mmc_hostname(host));
221 			if (IS_ERR(host->sdio_irq_thread)) {
222 				int err = PTR_ERR(host->sdio_irq_thread);
223 				host->sdio_irqs--;
224 				return err;
225 			}
226 		} else if (host->caps & MMC_CAP_SDIO_IRQ) {
227 			host->ops->enable_sdio_irq(host, 1);
228 		}
229 	}
230 
231 	return 0;
232 }
233 
234 static int sdio_card_irq_put(struct mmc_card *card)
235 {
236 	struct mmc_host *host = card->host;
237 
238 	WARN_ON(!host->claimed);
239 
240 	if (host->sdio_irqs < 1)
241 		return -EINVAL;
242 
243 	if (!--host->sdio_irqs) {
244 		if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD)) {
245 			atomic_set(&host->sdio_irq_thread_abort, 1);
246 			kthread_stop(host->sdio_irq_thread);
247 		} else if (host->caps & MMC_CAP_SDIO_IRQ) {
248 			host->ops->enable_sdio_irq(host, 0);
249 		}
250 	}
251 
252 	return 0;
253 }
254 
255 /* If there is only 1 function registered set sdio_single_irq */
256 static void sdio_single_irq_set(struct mmc_card *card)
257 {
258 	struct sdio_func *func;
259 	int i;
260 
261 	card->sdio_single_irq = NULL;
262 	if ((card->host->caps & MMC_CAP_SDIO_IRQ) &&
263 	    card->host->sdio_irqs == 1)
264 		for (i = 0; i < card->sdio_funcs; i++) {
265 		       func = card->sdio_func[i];
266 		       if (func && func->irq_handler) {
267 			       card->sdio_single_irq = func;
268 			       break;
269 		       }
270 	       }
271 }
272 
273 /**
274  *	sdio_claim_irq - claim the IRQ for a SDIO function
275  *	@func: SDIO function
276  *	@handler: IRQ handler callback
277  *
278  *	Claim and activate the IRQ for the given SDIO function. The provided
279  *	handler will be called when that IRQ is asserted.  The host is always
280  *	claimed already when the handler is called so the handler should not
281  *	call sdio_claim_host() or sdio_release_host().
282  */
283 int sdio_claim_irq(struct sdio_func *func, sdio_irq_handler_t *handler)
284 {
285 	int ret;
286 	unsigned char reg;
287 
288 	if (!func)
289 		return -EINVAL;
290 
291 	pr_debug("SDIO: Enabling IRQ for %s...\n", sdio_func_id(func));
292 
293 	if (func->irq_handler) {
294 		pr_debug("SDIO: IRQ for %s already in use.\n", sdio_func_id(func));
295 		return -EBUSY;
296 	}
297 
298 	ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IENx, 0, &reg);
299 	if (ret)
300 		return ret;
301 
302 	reg |= 1 << func->num;
303 
304 	reg |= 1; /* Master interrupt enable */
305 
306 	ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IENx, reg, NULL);
307 	if (ret)
308 		return ret;
309 
310 	func->irq_handler = handler;
311 	ret = sdio_card_irq_get(func->card);
312 	if (ret)
313 		func->irq_handler = NULL;
314 	sdio_single_irq_set(func->card);
315 
316 	return ret;
317 }
318 EXPORT_SYMBOL_GPL(sdio_claim_irq);
319 
320 /**
321  *	sdio_release_irq - release the IRQ for a SDIO function
322  *	@func: SDIO function
323  *
324  *	Disable and release the IRQ for the given SDIO function.
325  */
326 int sdio_release_irq(struct sdio_func *func)
327 {
328 	int ret;
329 	unsigned char reg;
330 
331 	if (!func)
332 		return -EINVAL;
333 
334 	pr_debug("SDIO: Disabling IRQ for %s...\n", sdio_func_id(func));
335 
336 	if (func->irq_handler) {
337 		func->irq_handler = NULL;
338 		sdio_card_irq_put(func->card);
339 		sdio_single_irq_set(func->card);
340 	}
341 
342 	ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IENx, 0, &reg);
343 	if (ret)
344 		return ret;
345 
346 	reg &= ~(1 << func->num);
347 
348 	/* Disable master interrupt with the last function interrupt */
349 	if (!(reg & 0xFE))
350 		reg = 0;
351 
352 	ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IENx, reg, NULL);
353 	if (ret)
354 		return ret;
355 
356 	return 0;
357 }
358 EXPORT_SYMBOL_GPL(sdio_release_irq);
359 
360