1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * linux/drivers/mmc/core/sdio_irq.c 4 * 5 * Author: Nicolas Pitre 6 * Created: June 18, 2007 7 * Copyright: MontaVista Software Inc. 8 * 9 * Copyright 2008 Pierre Ossman 10 */ 11 12 #include <linux/kernel.h> 13 #include <linux/sched.h> 14 #include <uapi/linux/sched/types.h> 15 #include <linux/kthread.h> 16 #include <linux/export.h> 17 #include <linux/wait.h> 18 #include <linux/delay.h> 19 20 #include <linux/mmc/core.h> 21 #include <linux/mmc/host.h> 22 #include <linux/mmc/card.h> 23 #include <linux/mmc/sdio.h> 24 #include <linux/mmc/sdio_func.h> 25 26 #include "sdio_ops.h" 27 #include "core.h" 28 #include "card.h" 29 30 static int sdio_get_pending_irqs(struct mmc_host *host, u8 *pending) 31 { 32 struct mmc_card *card = host->card; 33 int ret; 34 35 WARN_ON(!host->claimed); 36 37 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_INTx, 0, pending); 38 if (ret) { 39 pr_debug("%s: error %d reading SDIO_CCCR_INTx\n", 40 mmc_card_id(card), ret); 41 return ret; 42 } 43 44 if (*pending && mmc_card_broken_irq_polling(card) && 45 !(host->caps & MMC_CAP_SDIO_IRQ)) { 46 unsigned char dummy; 47 48 /* A fake interrupt could be created when we poll SDIO_CCCR_INTx 49 * register with a Marvell SD8797 card. A dummy CMD52 read to 50 * function 0 register 0xff can avoid this. 51 */ 52 mmc_io_rw_direct(card, 0, 0, 0xff, 0, &dummy); 53 } 54 55 return 0; 56 } 57 58 static int process_sdio_pending_irqs(struct mmc_host *host) 59 { 60 struct mmc_card *card = host->card; 61 int i, ret, count; 62 bool sdio_irq_pending = host->sdio_irq_pending; 63 unsigned char pending; 64 struct sdio_func *func; 65 66 /* Don't process SDIO IRQs if the card is suspended. */ 67 if (mmc_card_suspended(card)) 68 return 0; 69 70 /* Clear the flag to indicate that we have processed the IRQ. */ 71 host->sdio_irq_pending = false; 72 73 /* 74 * Optimization, if there is only 1 function interrupt registered 75 * and we know an IRQ was signaled then call irq handler directly. 76 * Otherwise do the full probe. 77 */ 78 func = card->sdio_single_irq; 79 if (func && sdio_irq_pending) { 80 func->irq_handler(func); 81 return 1; 82 } 83 84 ret = sdio_get_pending_irqs(host, &pending); 85 if (ret) 86 return ret; 87 88 count = 0; 89 for (i = 1; i <= 7; i++) { 90 if (pending & (1 << i)) { 91 func = card->sdio_func[i - 1]; 92 if (!func) { 93 pr_warn("%s: pending IRQ for non-existent function\n", 94 mmc_card_id(card)); 95 ret = -EINVAL; 96 } else if (func->irq_handler) { 97 func->irq_handler(func); 98 count++; 99 } else { 100 pr_warn("%s: pending IRQ with no handler\n", 101 sdio_func_id(func)); 102 ret = -EINVAL; 103 } 104 } 105 } 106 107 if (count) 108 return count; 109 110 return ret; 111 } 112 113 static void sdio_run_irqs(struct mmc_host *host) 114 { 115 mmc_claim_host(host); 116 if (host->sdio_irqs) { 117 process_sdio_pending_irqs(host); 118 if (!host->sdio_irq_pending) 119 host->ops->ack_sdio_irq(host); 120 } 121 mmc_release_host(host); 122 } 123 124 void sdio_irq_work(struct work_struct *work) 125 { 126 struct mmc_host *host = 127 container_of(work, struct mmc_host, sdio_irq_work); 128 129 sdio_run_irqs(host); 130 } 131 132 void sdio_signal_irq(struct mmc_host *host) 133 { 134 host->sdio_irq_pending = true; 135 schedule_work(&host->sdio_irq_work); 136 } 137 EXPORT_SYMBOL_GPL(sdio_signal_irq); 138 139 static int sdio_irq_thread(void *_host) 140 { 141 struct mmc_host *host = _host; 142 unsigned long period, idle_period; 143 int ret; 144 145 sched_set_fifo_low(current); 146 147 /* 148 * We want to allow for SDIO cards to work even on non SDIO 149 * aware hosts. One thing that non SDIO host cannot do is 150 * asynchronous notification of pending SDIO card interrupts 151 * hence we poll for them in that case. 152 */ 153 idle_period = msecs_to_jiffies(10); 154 period = (host->caps & MMC_CAP_SDIO_IRQ) ? 155 MAX_SCHEDULE_TIMEOUT : idle_period; 156 157 pr_debug("%s: IRQ thread started (poll period = %lu jiffies)\n", 158 mmc_hostname(host), period); 159 160 do { 161 /* 162 * We claim the host here on drivers behalf for a couple 163 * reasons: 164 * 165 * 1) it is already needed to retrieve the CCCR_INTx; 166 * 2) we want the driver(s) to clear the IRQ condition ASAP; 167 * 3) we need to control the abort condition locally. 168 * 169 * Just like traditional hard IRQ handlers, we expect SDIO 170 * IRQ handlers to be quick and to the point, so that the 171 * holding of the host lock does not cover too much work 172 * that doesn't require that lock to be held. 173 */ 174 ret = __mmc_claim_host(host, NULL, 175 &host->sdio_irq_thread_abort); 176 if (ret) 177 break; 178 ret = process_sdio_pending_irqs(host); 179 mmc_release_host(host); 180 181 /* 182 * Give other threads a chance to run in the presence of 183 * errors. 184 */ 185 if (ret < 0) { 186 set_current_state(TASK_INTERRUPTIBLE); 187 if (!kthread_should_stop()) 188 schedule_timeout(HZ); 189 set_current_state(TASK_RUNNING); 190 } 191 192 /* 193 * Adaptive polling frequency based on the assumption 194 * that an interrupt will be closely followed by more. 195 * This has a substantial benefit for network devices. 196 */ 197 if (!(host->caps & MMC_CAP_SDIO_IRQ)) { 198 if (ret > 0) 199 period /= 2; 200 else { 201 period++; 202 if (period > idle_period) 203 period = idle_period; 204 } 205 } 206 207 set_current_state(TASK_INTERRUPTIBLE); 208 if (host->caps & MMC_CAP_SDIO_IRQ) 209 host->ops->enable_sdio_irq(host, 1); 210 if (!kthread_should_stop()) 211 schedule_timeout(period); 212 set_current_state(TASK_RUNNING); 213 } while (!kthread_should_stop()); 214 215 if (host->caps & MMC_CAP_SDIO_IRQ) 216 host->ops->enable_sdio_irq(host, 0); 217 218 pr_debug("%s: IRQ thread exiting with code %d\n", 219 mmc_hostname(host), ret); 220 221 return ret; 222 } 223 224 static int sdio_card_irq_get(struct mmc_card *card) 225 { 226 struct mmc_host *host = card->host; 227 228 WARN_ON(!host->claimed); 229 230 if (!host->sdio_irqs++) { 231 if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD)) { 232 atomic_set(&host->sdio_irq_thread_abort, 0); 233 host->sdio_irq_thread = 234 kthread_run(sdio_irq_thread, host, 235 "ksdioirqd/%s", mmc_hostname(host)); 236 if (IS_ERR(host->sdio_irq_thread)) { 237 int err = PTR_ERR(host->sdio_irq_thread); 238 host->sdio_irqs--; 239 return err; 240 } 241 } else if (host->caps & MMC_CAP_SDIO_IRQ) { 242 host->ops->enable_sdio_irq(host, 1); 243 } 244 } 245 246 return 0; 247 } 248 249 static int sdio_card_irq_put(struct mmc_card *card) 250 { 251 struct mmc_host *host = card->host; 252 253 WARN_ON(!host->claimed); 254 255 if (host->sdio_irqs < 1) 256 return -EINVAL; 257 258 if (!--host->sdio_irqs) { 259 if (!(host->caps2 & MMC_CAP2_SDIO_IRQ_NOTHREAD)) { 260 atomic_set(&host->sdio_irq_thread_abort, 1); 261 kthread_stop(host->sdio_irq_thread); 262 } else if (host->caps & MMC_CAP_SDIO_IRQ) { 263 host->ops->enable_sdio_irq(host, 0); 264 } 265 } 266 267 return 0; 268 } 269 270 /* If there is only 1 function registered set sdio_single_irq */ 271 static void sdio_single_irq_set(struct mmc_card *card) 272 { 273 struct sdio_func *func; 274 int i; 275 276 card->sdio_single_irq = NULL; 277 if ((card->host->caps & MMC_CAP_SDIO_IRQ) && 278 card->host->sdio_irqs == 1) { 279 for (i = 0; i < card->sdio_funcs; i++) { 280 func = card->sdio_func[i]; 281 if (func && func->irq_handler) { 282 card->sdio_single_irq = func; 283 break; 284 } 285 } 286 } 287 } 288 289 /** 290 * sdio_claim_irq - claim the IRQ for a SDIO function 291 * @func: SDIO function 292 * @handler: IRQ handler callback 293 * 294 * Claim and activate the IRQ for the given SDIO function. The provided 295 * handler will be called when that IRQ is asserted. The host is always 296 * claimed already when the handler is called so the handler should not 297 * call sdio_claim_host() or sdio_release_host(). 298 */ 299 int sdio_claim_irq(struct sdio_func *func, sdio_irq_handler_t *handler) 300 { 301 int ret; 302 unsigned char reg; 303 304 if (!func) 305 return -EINVAL; 306 307 pr_debug("SDIO: Enabling IRQ for %s...\n", sdio_func_id(func)); 308 309 if (func->irq_handler) { 310 pr_debug("SDIO: IRQ for %s already in use.\n", sdio_func_id(func)); 311 return -EBUSY; 312 } 313 314 ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IENx, 0, ®); 315 if (ret) 316 return ret; 317 318 reg |= 1 << func->num; 319 320 reg |= 1; /* Master interrupt enable */ 321 322 ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IENx, reg, NULL); 323 if (ret) 324 return ret; 325 326 func->irq_handler = handler; 327 ret = sdio_card_irq_get(func->card); 328 if (ret) 329 func->irq_handler = NULL; 330 sdio_single_irq_set(func->card); 331 332 return ret; 333 } 334 EXPORT_SYMBOL_GPL(sdio_claim_irq); 335 336 /** 337 * sdio_release_irq - release the IRQ for a SDIO function 338 * @func: SDIO function 339 * 340 * Disable and release the IRQ for the given SDIO function. 341 */ 342 int sdio_release_irq(struct sdio_func *func) 343 { 344 int ret; 345 unsigned char reg; 346 347 if (!func) 348 return -EINVAL; 349 350 pr_debug("SDIO: Disabling IRQ for %s...\n", sdio_func_id(func)); 351 352 if (func->irq_handler) { 353 func->irq_handler = NULL; 354 sdio_card_irq_put(func->card); 355 sdio_single_irq_set(func->card); 356 } 357 358 ret = mmc_io_rw_direct(func->card, 0, 0, SDIO_CCCR_IENx, 0, ®); 359 if (ret) 360 return ret; 361 362 reg &= ~(1 << func->num); 363 364 /* Disable master interrupt with the last function interrupt */ 365 if (!(reg & 0xFE)) 366 reg = 0; 367 368 ret = mmc_io_rw_direct(func->card, 1, 0, SDIO_CCCR_IENx, reg, NULL); 369 if (ret) 370 return ret; 371 372 return 0; 373 } 374 EXPORT_SYMBOL_GPL(sdio_release_irq); 375 376