1 /* 2 * linux/drivers/mmc/sdio.c 3 * 4 * Copyright 2006-2007 Pierre Ossman 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or (at 9 * your option) any later version. 10 */ 11 12 #include <linux/err.h> 13 #include <linux/pm_runtime.h> 14 15 #include <linux/mmc/host.h> 16 #include <linux/mmc/card.h> 17 #include <linux/mmc/mmc.h> 18 #include <linux/mmc/sdio.h> 19 #include <linux/mmc/sdio_func.h> 20 #include <linux/mmc/sdio_ids.h> 21 22 #include "core.h" 23 #include "bus.h" 24 #include "sd.h" 25 #include "sdio_bus.h" 26 #include "mmc_ops.h" 27 #include "sd_ops.h" 28 #include "sdio_ops.h" 29 #include "sdio_cis.h" 30 31 static int sdio_read_fbr(struct sdio_func *func) 32 { 33 int ret; 34 unsigned char data; 35 36 if (mmc_card_nonstd_func_interface(func->card)) { 37 func->class = SDIO_CLASS_NONE; 38 return 0; 39 } 40 41 ret = mmc_io_rw_direct(func->card, 0, 0, 42 SDIO_FBR_BASE(func->num) + SDIO_FBR_STD_IF, 0, &data); 43 if (ret) 44 goto out; 45 46 data &= 0x0f; 47 48 if (data == 0x0f) { 49 ret = mmc_io_rw_direct(func->card, 0, 0, 50 SDIO_FBR_BASE(func->num) + SDIO_FBR_STD_IF_EXT, 0, &data); 51 if (ret) 52 goto out; 53 } 54 55 func->class = data; 56 57 out: 58 return ret; 59 } 60 61 static int sdio_init_func(struct mmc_card *card, unsigned int fn) 62 { 63 int ret; 64 struct sdio_func *func; 65 66 BUG_ON(fn > SDIO_MAX_FUNCS); 67 68 func = sdio_alloc_func(card); 69 if (IS_ERR(func)) 70 return PTR_ERR(func); 71 72 func->num = fn; 73 74 if (!(card->quirks & MMC_QUIRK_NONSTD_SDIO)) { 75 ret = sdio_read_fbr(func); 76 if (ret) 77 goto fail; 78 79 ret = sdio_read_func_cis(func); 80 if (ret) 81 goto fail; 82 } else { 83 func->vendor = func->card->cis.vendor; 84 func->device = func->card->cis.device; 85 func->max_blksize = func->card->cis.blksize; 86 } 87 88 card->sdio_func[fn - 1] = func; 89 90 return 0; 91 92 fail: 93 /* 94 * It is okay to remove the function here even though we hold 95 * the host lock as we haven't registered the device yet. 96 */ 97 sdio_remove_func(func); 98 return ret; 99 } 100 101 static int sdio_read_cccr(struct mmc_card *card, u32 ocr) 102 { 103 int ret; 104 int cccr_vsn; 105 int uhs = ocr & R4_18V_PRESENT; 106 unsigned char data; 107 unsigned char speed; 108 109 memset(&card->cccr, 0, sizeof(struct sdio_cccr)); 110 111 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_CCCR, 0, &data); 112 if (ret) 113 goto out; 114 115 cccr_vsn = data & 0x0f; 116 117 if (cccr_vsn > SDIO_CCCR_REV_3_00) { 118 pr_err("%s: unrecognised CCCR structure version %d\n", 119 mmc_hostname(card->host), cccr_vsn); 120 return -EINVAL; 121 } 122 123 card->cccr.sdio_vsn = (data & 0xf0) >> 4; 124 125 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_CAPS, 0, &data); 126 if (ret) 127 goto out; 128 129 if (data & SDIO_CCCR_CAP_SMB) 130 card->cccr.multi_block = 1; 131 if (data & SDIO_CCCR_CAP_LSC) 132 card->cccr.low_speed = 1; 133 if (data & SDIO_CCCR_CAP_4BLS) 134 card->cccr.wide_bus = 1; 135 136 if (cccr_vsn >= SDIO_CCCR_REV_1_10) { 137 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_POWER, 0, &data); 138 if (ret) 139 goto out; 140 141 if (data & SDIO_POWER_SMPC) 142 card->cccr.high_power = 1; 143 } 144 145 if (cccr_vsn >= SDIO_CCCR_REV_1_20) { 146 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed); 147 if (ret) 148 goto out; 149 150 card->scr.sda_spec3 = 0; 151 card->sw_caps.sd3_bus_mode = 0; 152 card->sw_caps.sd3_drv_type = 0; 153 if (cccr_vsn >= SDIO_CCCR_REV_3_00 && uhs) { 154 card->scr.sda_spec3 = 1; 155 ret = mmc_io_rw_direct(card, 0, 0, 156 SDIO_CCCR_UHS, 0, &data); 157 if (ret) 158 goto out; 159 160 if (mmc_host_uhs(card->host)) { 161 if (data & SDIO_UHS_DDR50) 162 card->sw_caps.sd3_bus_mode 163 |= SD_MODE_UHS_DDR50; 164 165 if (data & SDIO_UHS_SDR50) 166 card->sw_caps.sd3_bus_mode 167 |= SD_MODE_UHS_SDR50; 168 169 if (data & SDIO_UHS_SDR104) 170 card->sw_caps.sd3_bus_mode 171 |= SD_MODE_UHS_SDR104; 172 } 173 174 ret = mmc_io_rw_direct(card, 0, 0, 175 SDIO_CCCR_DRIVE_STRENGTH, 0, &data); 176 if (ret) 177 goto out; 178 179 if (data & SDIO_DRIVE_SDTA) 180 card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_A; 181 if (data & SDIO_DRIVE_SDTC) 182 card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_C; 183 if (data & SDIO_DRIVE_SDTD) 184 card->sw_caps.sd3_drv_type |= SD_DRIVER_TYPE_D; 185 } 186 187 /* if no uhs mode ensure we check for high speed */ 188 if (!card->sw_caps.sd3_bus_mode) { 189 if (speed & SDIO_SPEED_SHS) { 190 card->cccr.high_speed = 1; 191 card->sw_caps.hs_max_dtr = 50000000; 192 } else { 193 card->cccr.high_speed = 0; 194 card->sw_caps.hs_max_dtr = 25000000; 195 } 196 } 197 } 198 199 out: 200 return ret; 201 } 202 203 static int sdio_enable_wide(struct mmc_card *card) 204 { 205 int ret; 206 u8 ctrl; 207 208 if (!(card->host->caps & MMC_CAP_4_BIT_DATA)) 209 return 0; 210 211 if (card->cccr.low_speed && !card->cccr.wide_bus) 212 return 0; 213 214 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl); 215 if (ret) 216 return ret; 217 218 if ((ctrl & SDIO_BUS_WIDTH_MASK) == SDIO_BUS_WIDTH_RESERVED) 219 pr_warning("%s: SDIO_CCCR_IF is invalid: 0x%02x\n", 220 mmc_hostname(card->host), ctrl); 221 222 /* set as 4-bit bus width */ 223 ctrl &= ~SDIO_BUS_WIDTH_MASK; 224 ctrl |= SDIO_BUS_WIDTH_4BIT; 225 226 ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL); 227 if (ret) 228 return ret; 229 230 return 1; 231 } 232 233 /* 234 * If desired, disconnect the pull-up resistor on CD/DAT[3] (pin 1) 235 * of the card. This may be required on certain setups of boards, 236 * controllers and embedded sdio device which do not need the card's 237 * pull-up. As a result, card detection is disabled and power is saved. 238 */ 239 static int sdio_disable_cd(struct mmc_card *card) 240 { 241 int ret; 242 u8 ctrl; 243 244 if (!mmc_card_disable_cd(card)) 245 return 0; 246 247 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl); 248 if (ret) 249 return ret; 250 251 ctrl |= SDIO_BUS_CD_DISABLE; 252 253 return mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL); 254 } 255 256 /* 257 * Devices that remain active during a system suspend are 258 * put back into 1-bit mode. 259 */ 260 static int sdio_disable_wide(struct mmc_card *card) 261 { 262 int ret; 263 u8 ctrl; 264 265 if (!(card->host->caps & MMC_CAP_4_BIT_DATA)) 266 return 0; 267 268 if (card->cccr.low_speed && !card->cccr.wide_bus) 269 return 0; 270 271 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_IF, 0, &ctrl); 272 if (ret) 273 return ret; 274 275 if (!(ctrl & SDIO_BUS_WIDTH_4BIT)) 276 return 0; 277 278 ctrl &= ~SDIO_BUS_WIDTH_4BIT; 279 ctrl |= SDIO_BUS_ASYNC_INT; 280 281 ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_IF, ctrl, NULL); 282 if (ret) 283 return ret; 284 285 mmc_set_bus_width(card->host, MMC_BUS_WIDTH_1); 286 287 return 0; 288 } 289 290 291 static int sdio_enable_4bit_bus(struct mmc_card *card) 292 { 293 int err; 294 295 if (card->type == MMC_TYPE_SDIO) 296 return sdio_enable_wide(card); 297 298 if ((card->host->caps & MMC_CAP_4_BIT_DATA) && 299 (card->scr.bus_widths & SD_SCR_BUS_WIDTH_4)) { 300 err = mmc_app_set_bus_width(card, MMC_BUS_WIDTH_4); 301 if (err) 302 return err; 303 } else 304 return 0; 305 306 err = sdio_enable_wide(card); 307 if (err <= 0) 308 mmc_app_set_bus_width(card, MMC_BUS_WIDTH_1); 309 310 return err; 311 } 312 313 314 /* 315 * Test if the card supports high-speed mode and, if so, switch to it. 316 */ 317 static int mmc_sdio_switch_hs(struct mmc_card *card, int enable) 318 { 319 int ret; 320 u8 speed; 321 322 if (!(card->host->caps & MMC_CAP_SD_HIGHSPEED)) 323 return 0; 324 325 if (!card->cccr.high_speed) 326 return 0; 327 328 ret = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed); 329 if (ret) 330 return ret; 331 332 if (enable) 333 speed |= SDIO_SPEED_EHS; 334 else 335 speed &= ~SDIO_SPEED_EHS; 336 337 ret = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_SPEED, speed, NULL); 338 if (ret) 339 return ret; 340 341 return 1; 342 } 343 344 /* 345 * Enable SDIO/combo card's high-speed mode. Return 0/1 if [not]supported. 346 */ 347 static int sdio_enable_hs(struct mmc_card *card) 348 { 349 int ret; 350 351 ret = mmc_sdio_switch_hs(card, true); 352 if (ret <= 0 || card->type == MMC_TYPE_SDIO) 353 return ret; 354 355 ret = mmc_sd_switch_hs(card); 356 if (ret <= 0) 357 mmc_sdio_switch_hs(card, false); 358 359 return ret; 360 } 361 362 static unsigned mmc_sdio_get_max_clock(struct mmc_card *card) 363 { 364 unsigned max_dtr; 365 366 if (mmc_card_highspeed(card)) { 367 /* 368 * The SDIO specification doesn't mention how 369 * the CIS transfer speed register relates to 370 * high-speed, but it seems that 50 MHz is 371 * mandatory. 372 */ 373 max_dtr = 50000000; 374 } else { 375 max_dtr = card->cis.max_dtr; 376 } 377 378 if (card->type == MMC_TYPE_SD_COMBO) 379 max_dtr = min(max_dtr, mmc_sd_get_max_clock(card)); 380 381 return max_dtr; 382 } 383 384 static unsigned char host_drive_to_sdio_drive(int host_strength) 385 { 386 switch (host_strength) { 387 case MMC_SET_DRIVER_TYPE_A: 388 return SDIO_DTSx_SET_TYPE_A; 389 case MMC_SET_DRIVER_TYPE_B: 390 return SDIO_DTSx_SET_TYPE_B; 391 case MMC_SET_DRIVER_TYPE_C: 392 return SDIO_DTSx_SET_TYPE_C; 393 case MMC_SET_DRIVER_TYPE_D: 394 return SDIO_DTSx_SET_TYPE_D; 395 default: 396 return SDIO_DTSx_SET_TYPE_B; 397 } 398 } 399 400 static void sdio_select_driver_type(struct mmc_card *card) 401 { 402 int host_drv_type = SD_DRIVER_TYPE_B; 403 int card_drv_type = SD_DRIVER_TYPE_B; 404 int drive_strength; 405 unsigned char card_strength; 406 int err; 407 408 /* 409 * If the host doesn't support any of the Driver Types A,C or D, 410 * or there is no board specific handler then default Driver 411 * Type B is used. 412 */ 413 if (!(card->host->caps & 414 (MMC_CAP_DRIVER_TYPE_A | 415 MMC_CAP_DRIVER_TYPE_C | 416 MMC_CAP_DRIVER_TYPE_D))) 417 return; 418 419 if (!card->host->ops->select_drive_strength) 420 return; 421 422 if (card->host->caps & MMC_CAP_DRIVER_TYPE_A) 423 host_drv_type |= SD_DRIVER_TYPE_A; 424 425 if (card->host->caps & MMC_CAP_DRIVER_TYPE_C) 426 host_drv_type |= SD_DRIVER_TYPE_C; 427 428 if (card->host->caps & MMC_CAP_DRIVER_TYPE_D) 429 host_drv_type |= SD_DRIVER_TYPE_D; 430 431 if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_A) 432 card_drv_type |= SD_DRIVER_TYPE_A; 433 434 if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_C) 435 card_drv_type |= SD_DRIVER_TYPE_C; 436 437 if (card->sw_caps.sd3_drv_type & SD_DRIVER_TYPE_D) 438 card_drv_type |= SD_DRIVER_TYPE_D; 439 440 /* 441 * The drive strength that the hardware can support 442 * depends on the board design. Pass the appropriate 443 * information and let the hardware specific code 444 * return what is possible given the options 445 */ 446 drive_strength = card->host->ops->select_drive_strength( 447 card->sw_caps.uhs_max_dtr, 448 host_drv_type, card_drv_type); 449 450 /* if error just use default for drive strength B */ 451 err = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_DRIVE_STRENGTH, 0, 452 &card_strength); 453 if (err) 454 return; 455 456 card_strength &= ~(SDIO_DRIVE_DTSx_MASK<<SDIO_DRIVE_DTSx_SHIFT); 457 card_strength |= host_drive_to_sdio_drive(drive_strength); 458 459 err = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_DRIVE_STRENGTH, 460 card_strength, NULL); 461 462 /* if error default to drive strength B */ 463 if (!err) 464 mmc_set_driver_type(card->host, drive_strength); 465 } 466 467 468 static int sdio_set_bus_speed_mode(struct mmc_card *card) 469 { 470 unsigned int bus_speed, timing; 471 int err; 472 unsigned char speed; 473 474 /* 475 * If the host doesn't support any of the UHS-I modes, fallback on 476 * default speed. 477 */ 478 if (!mmc_host_uhs(card->host)) 479 return 0; 480 481 bus_speed = SDIO_SPEED_SDR12; 482 timing = MMC_TIMING_UHS_SDR12; 483 if ((card->host->caps & MMC_CAP_UHS_SDR104) && 484 (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104)) { 485 bus_speed = SDIO_SPEED_SDR104; 486 timing = MMC_TIMING_UHS_SDR104; 487 card->sw_caps.uhs_max_dtr = UHS_SDR104_MAX_DTR; 488 card->sd_bus_speed = UHS_SDR104_BUS_SPEED; 489 } else if ((card->host->caps & MMC_CAP_UHS_DDR50) && 490 (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_DDR50)) { 491 bus_speed = SDIO_SPEED_DDR50; 492 timing = MMC_TIMING_UHS_DDR50; 493 card->sw_caps.uhs_max_dtr = UHS_DDR50_MAX_DTR; 494 card->sd_bus_speed = UHS_DDR50_BUS_SPEED; 495 } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 | 496 MMC_CAP_UHS_SDR50)) && (card->sw_caps.sd3_bus_mode & 497 SD_MODE_UHS_SDR50)) { 498 bus_speed = SDIO_SPEED_SDR50; 499 timing = MMC_TIMING_UHS_SDR50; 500 card->sw_caps.uhs_max_dtr = UHS_SDR50_MAX_DTR; 501 card->sd_bus_speed = UHS_SDR50_BUS_SPEED; 502 } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 | 503 MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25)) && 504 (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR25)) { 505 bus_speed = SDIO_SPEED_SDR25; 506 timing = MMC_TIMING_UHS_SDR25; 507 card->sw_caps.uhs_max_dtr = UHS_SDR25_MAX_DTR; 508 card->sd_bus_speed = UHS_SDR25_BUS_SPEED; 509 } else if ((card->host->caps & (MMC_CAP_UHS_SDR104 | 510 MMC_CAP_UHS_SDR50 | MMC_CAP_UHS_SDR25 | 511 MMC_CAP_UHS_SDR12)) && (card->sw_caps.sd3_bus_mode & 512 SD_MODE_UHS_SDR12)) { 513 bus_speed = SDIO_SPEED_SDR12; 514 timing = MMC_TIMING_UHS_SDR12; 515 card->sw_caps.uhs_max_dtr = UHS_SDR12_MAX_DTR; 516 card->sd_bus_speed = UHS_SDR12_BUS_SPEED; 517 } 518 519 err = mmc_io_rw_direct(card, 0, 0, SDIO_CCCR_SPEED, 0, &speed); 520 if (err) 521 return err; 522 523 speed &= ~SDIO_SPEED_BSS_MASK; 524 speed |= bus_speed; 525 err = mmc_io_rw_direct(card, 1, 0, SDIO_CCCR_SPEED, speed, NULL); 526 if (err) 527 return err; 528 529 if (bus_speed) { 530 mmc_set_timing(card->host, timing); 531 mmc_set_clock(card->host, card->sw_caps.uhs_max_dtr); 532 } 533 534 return 0; 535 } 536 537 /* 538 * UHS-I specific initialization procedure 539 */ 540 static int mmc_sdio_init_uhs_card(struct mmc_card *card) 541 { 542 int err; 543 544 if (!card->scr.sda_spec3) 545 return 0; 546 547 /* 548 * Switch to wider bus (if supported). 549 */ 550 if (card->host->caps & MMC_CAP_4_BIT_DATA) { 551 err = sdio_enable_4bit_bus(card); 552 if (err > 0) { 553 mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4); 554 err = 0; 555 } 556 } 557 558 /* Set the driver strength for the card */ 559 sdio_select_driver_type(card); 560 561 /* Set bus speed mode of the card */ 562 err = sdio_set_bus_speed_mode(card); 563 if (err) 564 goto out; 565 566 /* 567 * SPI mode doesn't define CMD19 and tuning is only valid for SDR50 and 568 * SDR104 mode SD-cards. Note that tuning is mandatory for SDR104. 569 */ 570 if (!mmc_host_is_spi(card->host) && card->host->ops->execute_tuning && 571 ((card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR50) || 572 (card->sw_caps.sd3_bus_mode & SD_MODE_UHS_SDR104))) { 573 mmc_host_clk_hold(card->host); 574 err = card->host->ops->execute_tuning(card->host, 575 MMC_SEND_TUNING_BLOCK); 576 mmc_host_clk_release(card->host); 577 } 578 579 out: 580 581 return err; 582 } 583 584 /* 585 * Handle the detection and initialisation of a card. 586 * 587 * In the case of a resume, "oldcard" will contain the card 588 * we're trying to reinitialise. 589 */ 590 static int mmc_sdio_init_card(struct mmc_host *host, u32 ocr, 591 struct mmc_card *oldcard, int powered_resume) 592 { 593 struct mmc_card *card; 594 int err; 595 int retries = 10; 596 u32 rocr = 0; 597 u32 ocr_card = ocr; 598 599 BUG_ON(!host); 600 WARN_ON(!host->claimed); 601 602 /* to query card if 1.8V signalling is supported */ 603 if (mmc_host_uhs(host)) 604 ocr |= R4_18V_PRESENT; 605 606 try_again: 607 if (!retries) { 608 pr_warning("%s: Skipping voltage switch\n", 609 mmc_hostname(host)); 610 ocr &= ~R4_18V_PRESENT; 611 } 612 613 /* 614 * Inform the card of the voltage 615 */ 616 if (!powered_resume) { 617 err = mmc_send_io_op_cond(host, ocr, &rocr); 618 if (err) 619 goto err; 620 } 621 622 /* 623 * For SPI, enable CRC as appropriate. 624 */ 625 if (mmc_host_is_spi(host)) { 626 err = mmc_spi_set_crc(host, use_spi_crc); 627 if (err) 628 goto err; 629 } 630 631 /* 632 * Allocate card structure. 633 */ 634 card = mmc_alloc_card(host, NULL); 635 if (IS_ERR(card)) { 636 err = PTR_ERR(card); 637 goto err; 638 } 639 640 if ((rocr & R4_MEMORY_PRESENT) && 641 mmc_sd_get_cid(host, ocr & rocr, card->raw_cid, NULL) == 0) { 642 card->type = MMC_TYPE_SD_COMBO; 643 644 if (oldcard && (oldcard->type != MMC_TYPE_SD_COMBO || 645 memcmp(card->raw_cid, oldcard->raw_cid, sizeof(card->raw_cid)) != 0)) { 646 mmc_remove_card(card); 647 return -ENOENT; 648 } 649 } else { 650 card->type = MMC_TYPE_SDIO; 651 652 if (oldcard && oldcard->type != MMC_TYPE_SDIO) { 653 mmc_remove_card(card); 654 return -ENOENT; 655 } 656 } 657 658 /* 659 * Call the optional HC's init_card function to handle quirks. 660 */ 661 if (host->ops->init_card) 662 host->ops->init_card(host, card); 663 664 /* 665 * If the host and card support UHS-I mode request the card 666 * to switch to 1.8V signaling level. No 1.8v signalling if 667 * UHS mode is not enabled to maintain compatibility and some 668 * systems that claim 1.8v signalling in fact do not support 669 * it. 670 */ 671 if (!powered_resume && (rocr & ocr & R4_18V_PRESENT)) { 672 err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, 673 ocr); 674 if (err == -EAGAIN) { 675 sdio_reset(host); 676 mmc_go_idle(host); 677 mmc_send_if_cond(host, host->ocr_avail); 678 mmc_remove_card(card); 679 retries--; 680 goto try_again; 681 } else if (err) { 682 ocr &= ~R4_18V_PRESENT; 683 } 684 err = 0; 685 } else { 686 ocr &= ~R4_18V_PRESENT; 687 } 688 689 /* 690 * For native busses: set card RCA and quit open drain mode. 691 */ 692 if (!powered_resume && !mmc_host_is_spi(host)) { 693 err = mmc_send_relative_addr(host, &card->rca); 694 if (err) 695 goto remove; 696 697 /* 698 * Update oldcard with the new RCA received from the SDIO 699 * device -- we're doing this so that it's updated in the 700 * "card" struct when oldcard overwrites that later. 701 */ 702 if (oldcard) 703 oldcard->rca = card->rca; 704 } 705 706 /* 707 * Read CSD, before selecting the card 708 */ 709 if (!oldcard && card->type == MMC_TYPE_SD_COMBO) { 710 err = mmc_sd_get_csd(host, card); 711 if (err) 712 return err; 713 714 mmc_decode_cid(card); 715 } 716 717 /* 718 * Select card, as all following commands rely on that. 719 */ 720 if (!powered_resume && !mmc_host_is_spi(host)) { 721 err = mmc_select_card(card); 722 if (err) 723 goto remove; 724 } 725 726 if (card->quirks & MMC_QUIRK_NONSTD_SDIO) { 727 /* 728 * This is non-standard SDIO device, meaning it doesn't 729 * have any CIA (Common I/O area) registers present. 730 * It's host's responsibility to fill cccr and cis 731 * structures in init_card(). 732 */ 733 mmc_set_clock(host, card->cis.max_dtr); 734 735 if (card->cccr.high_speed) { 736 mmc_card_set_highspeed(card); 737 mmc_set_timing(card->host, MMC_TIMING_SD_HS); 738 } 739 740 goto finish; 741 } 742 743 /* 744 * Read the common registers. 745 */ 746 err = sdio_read_cccr(card, ocr); 747 if (err) 748 goto remove; 749 750 /* 751 * Read the common CIS tuples. 752 */ 753 err = sdio_read_common_cis(card); 754 if (err) 755 goto remove; 756 757 if (oldcard) { 758 int same = (card->cis.vendor == oldcard->cis.vendor && 759 card->cis.device == oldcard->cis.device); 760 mmc_remove_card(card); 761 if (!same) 762 return -ENOENT; 763 764 card = oldcard; 765 } 766 card->ocr = ocr_card; 767 mmc_fixup_device(card, NULL); 768 769 if (card->type == MMC_TYPE_SD_COMBO) { 770 err = mmc_sd_setup_card(host, card, oldcard != NULL); 771 /* handle as SDIO-only card if memory init failed */ 772 if (err) { 773 mmc_go_idle(host); 774 if (mmc_host_is_spi(host)) 775 /* should not fail, as it worked previously */ 776 mmc_spi_set_crc(host, use_spi_crc); 777 card->type = MMC_TYPE_SDIO; 778 } else 779 card->dev.type = &sd_type; 780 } 781 782 /* 783 * If needed, disconnect card detection pull-up resistor. 784 */ 785 err = sdio_disable_cd(card); 786 if (err) 787 goto remove; 788 789 /* Initialization sequence for UHS-I cards */ 790 /* Only if card supports 1.8v and UHS signaling */ 791 if ((ocr & R4_18V_PRESENT) && card->sw_caps.sd3_bus_mode) { 792 err = mmc_sdio_init_uhs_card(card); 793 if (err) 794 goto remove; 795 796 /* Card is an ultra-high-speed card */ 797 mmc_card_set_uhs(card); 798 } else { 799 /* 800 * Switch to high-speed (if supported). 801 */ 802 err = sdio_enable_hs(card); 803 if (err > 0) 804 mmc_sd_go_highspeed(card); 805 else if (err) 806 goto remove; 807 808 /* 809 * Change to the card's maximum speed. 810 */ 811 mmc_set_clock(host, mmc_sdio_get_max_clock(card)); 812 813 /* 814 * Switch to wider bus (if supported). 815 */ 816 err = sdio_enable_4bit_bus(card); 817 if (err > 0) 818 mmc_set_bus_width(card->host, MMC_BUS_WIDTH_4); 819 else if (err) 820 goto remove; 821 } 822 finish: 823 if (!oldcard) 824 host->card = card; 825 return 0; 826 827 remove: 828 if (!oldcard) 829 mmc_remove_card(card); 830 831 err: 832 return err; 833 } 834 835 /* 836 * Host is being removed. Free up the current card. 837 */ 838 static void mmc_sdio_remove(struct mmc_host *host) 839 { 840 int i; 841 842 BUG_ON(!host); 843 BUG_ON(!host->card); 844 845 for (i = 0;i < host->card->sdio_funcs;i++) { 846 if (host->card->sdio_func[i]) { 847 sdio_remove_func(host->card->sdio_func[i]); 848 host->card->sdio_func[i] = NULL; 849 } 850 } 851 852 mmc_remove_card(host->card); 853 host->card = NULL; 854 } 855 856 /* 857 * Card detection - card is alive. 858 */ 859 static int mmc_sdio_alive(struct mmc_host *host) 860 { 861 return mmc_select_card(host->card); 862 } 863 864 /* 865 * Card detection callback from host. 866 */ 867 static void mmc_sdio_detect(struct mmc_host *host) 868 { 869 int err; 870 871 BUG_ON(!host); 872 BUG_ON(!host->card); 873 874 /* Make sure card is powered before detecting it */ 875 if (host->caps & MMC_CAP_POWER_OFF_CARD) { 876 err = pm_runtime_get_sync(&host->card->dev); 877 if (err < 0) { 878 pm_runtime_put_noidle(&host->card->dev); 879 goto out; 880 } 881 } 882 883 mmc_claim_host(host); 884 885 /* 886 * Just check if our card has been removed. 887 */ 888 err = _mmc_detect_card_removed(host); 889 890 mmc_release_host(host); 891 892 /* 893 * Tell PM core it's OK to power off the card now. 894 * 895 * The _sync variant is used in order to ensure that the card 896 * is left powered off in case an error occurred, and the card 897 * is going to be removed. 898 * 899 * Since there is no specific reason to believe a new user 900 * is about to show up at this point, the _sync variant is 901 * desirable anyway. 902 */ 903 if (host->caps & MMC_CAP_POWER_OFF_CARD) 904 pm_runtime_put_sync(&host->card->dev); 905 906 out: 907 if (err) { 908 mmc_sdio_remove(host); 909 910 mmc_claim_host(host); 911 mmc_detach_bus(host); 912 mmc_power_off(host); 913 mmc_release_host(host); 914 } 915 } 916 917 /* 918 * SDIO pre_suspend. We need to suspend all functions separately. 919 * Therefore all registered functions must have drivers with suspend 920 * and resume methods. Failing that we simply remove the whole card. 921 */ 922 static int mmc_sdio_pre_suspend(struct mmc_host *host) 923 { 924 int i, err = 0; 925 926 for (i = 0; i < host->card->sdio_funcs; i++) { 927 struct sdio_func *func = host->card->sdio_func[i]; 928 if (func && sdio_func_present(func) && func->dev.driver) { 929 const struct dev_pm_ops *pmops = func->dev.driver->pm; 930 if (!pmops || !pmops->suspend || !pmops->resume) { 931 /* force removal of entire card in that case */ 932 err = -ENOSYS; 933 break; 934 } 935 } 936 } 937 938 return err; 939 } 940 941 /* 942 * SDIO suspend. Suspend all functions separately. 943 */ 944 static int mmc_sdio_suspend(struct mmc_host *host) 945 { 946 int i, err = 0; 947 948 for (i = 0; i < host->card->sdio_funcs; i++) { 949 struct sdio_func *func = host->card->sdio_func[i]; 950 if (func && sdio_func_present(func) && func->dev.driver) { 951 const struct dev_pm_ops *pmops = func->dev.driver->pm; 952 err = pmops->suspend(&func->dev); 953 if (err) 954 break; 955 } 956 } 957 while (err && --i >= 0) { 958 struct sdio_func *func = host->card->sdio_func[i]; 959 if (func && sdio_func_present(func) && func->dev.driver) { 960 const struct dev_pm_ops *pmops = func->dev.driver->pm; 961 pmops->resume(&func->dev); 962 } 963 } 964 965 if (!err && mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) { 966 mmc_claim_host(host); 967 sdio_disable_wide(host->card); 968 mmc_release_host(host); 969 } 970 971 if (!err && !mmc_card_keep_power(host)) 972 mmc_power_off(host); 973 974 return err; 975 } 976 977 static int mmc_sdio_resume(struct mmc_host *host) 978 { 979 int i, err = 0; 980 981 BUG_ON(!host); 982 BUG_ON(!host->card); 983 984 /* Basic card reinitialization. */ 985 mmc_claim_host(host); 986 987 /* Restore power if needed */ 988 if (!mmc_card_keep_power(host)) { 989 mmc_power_up(host, host->card->ocr); 990 /* 991 * Tell runtime PM core we just powered up the card, 992 * since it still believes the card is powered off. 993 * Note that currently runtime PM is only enabled 994 * for SDIO cards that are MMC_CAP_POWER_OFF_CARD 995 */ 996 if (host->caps & MMC_CAP_POWER_OFF_CARD) { 997 pm_runtime_disable(&host->card->dev); 998 pm_runtime_set_active(&host->card->dev); 999 pm_runtime_enable(&host->card->dev); 1000 } 1001 } 1002 1003 /* No need to reinitialize powered-resumed nonremovable cards */ 1004 if (mmc_card_is_removable(host) || !mmc_card_keep_power(host)) { 1005 sdio_reset(host); 1006 mmc_go_idle(host); 1007 err = mmc_sdio_init_card(host, host->card->ocr, host->card, 1008 mmc_card_keep_power(host)); 1009 } else if (mmc_card_keep_power(host) && mmc_card_wake_sdio_irq(host)) { 1010 /* We may have switched to 1-bit mode during suspend */ 1011 err = sdio_enable_4bit_bus(host->card); 1012 if (err > 0) { 1013 mmc_set_bus_width(host, MMC_BUS_WIDTH_4); 1014 err = 0; 1015 } 1016 } 1017 1018 if (!err && host->sdio_irqs) 1019 wake_up_process(host->sdio_irq_thread); 1020 mmc_release_host(host); 1021 1022 /* 1023 * If the card looked to be the same as before suspending, then 1024 * we proceed to resume all card functions. If one of them returns 1025 * an error then we simply return that error to the core and the 1026 * card will be redetected as new. It is the responsibility of 1027 * the function driver to perform further tests with the extra 1028 * knowledge it has of the card to confirm the card is indeed the 1029 * same as before suspending (same MAC address for network cards, 1030 * etc.) and return an error otherwise. 1031 */ 1032 for (i = 0; !err && i < host->card->sdio_funcs; i++) { 1033 struct sdio_func *func = host->card->sdio_func[i]; 1034 if (func && sdio_func_present(func) && func->dev.driver) { 1035 const struct dev_pm_ops *pmops = func->dev.driver->pm; 1036 err = pmops->resume(&func->dev); 1037 } 1038 } 1039 1040 host->pm_flags &= ~MMC_PM_KEEP_POWER; 1041 return err; 1042 } 1043 1044 static int mmc_sdio_power_restore(struct mmc_host *host) 1045 { 1046 int ret; 1047 1048 BUG_ON(!host); 1049 BUG_ON(!host->card); 1050 1051 mmc_claim_host(host); 1052 1053 /* 1054 * Reset the card by performing the same steps that are taken by 1055 * mmc_rescan_try_freq() and mmc_attach_sdio() during a "normal" probe. 1056 * 1057 * sdio_reset() is technically not needed. Having just powered up the 1058 * hardware, it should already be in reset state. However, some 1059 * platforms (such as SD8686 on OLPC) do not instantly cut power, 1060 * meaning that a reset is required when restoring power soon after 1061 * powering off. It is harmless in other cases. 1062 * 1063 * The CMD5 reset (mmc_send_io_op_cond()), according to the SDIO spec, 1064 * is not necessary for non-removable cards. However, it is required 1065 * for OLPC SD8686 (which expects a [CMD5,5,3,7] init sequence), and 1066 * harmless in other situations. 1067 * 1068 */ 1069 1070 sdio_reset(host); 1071 mmc_go_idle(host); 1072 mmc_send_if_cond(host, host->ocr_avail); 1073 1074 ret = mmc_send_io_op_cond(host, 0, NULL); 1075 if (ret) 1076 goto out; 1077 1078 ret = mmc_sdio_init_card(host, host->card->ocr, host->card, 1079 mmc_card_keep_power(host)); 1080 if (!ret && host->sdio_irqs) 1081 mmc_signal_sdio_irq(host); 1082 1083 out: 1084 mmc_release_host(host); 1085 1086 return ret; 1087 } 1088 1089 static int mmc_sdio_runtime_suspend(struct mmc_host *host) 1090 { 1091 /* No references to the card, cut the power to it. */ 1092 mmc_power_off(host); 1093 return 0; 1094 } 1095 1096 static int mmc_sdio_runtime_resume(struct mmc_host *host) 1097 { 1098 /* Restore power and re-initialize. */ 1099 mmc_power_up(host, host->card->ocr); 1100 return mmc_sdio_power_restore(host); 1101 } 1102 1103 static const struct mmc_bus_ops mmc_sdio_ops = { 1104 .remove = mmc_sdio_remove, 1105 .detect = mmc_sdio_detect, 1106 .pre_suspend = mmc_sdio_pre_suspend, 1107 .suspend = mmc_sdio_suspend, 1108 .resume = mmc_sdio_resume, 1109 .runtime_suspend = mmc_sdio_runtime_suspend, 1110 .runtime_resume = mmc_sdio_runtime_resume, 1111 .power_restore = mmc_sdio_power_restore, 1112 .alive = mmc_sdio_alive, 1113 }; 1114 1115 1116 /* 1117 * Starting point for SDIO card init. 1118 */ 1119 int mmc_attach_sdio(struct mmc_host *host) 1120 { 1121 int err, i, funcs; 1122 u32 ocr, rocr; 1123 struct mmc_card *card; 1124 1125 BUG_ON(!host); 1126 WARN_ON(!host->claimed); 1127 1128 err = mmc_send_io_op_cond(host, 0, &ocr); 1129 if (err) 1130 return err; 1131 1132 mmc_attach_bus(host, &mmc_sdio_ops); 1133 if (host->ocr_avail_sdio) 1134 host->ocr_avail = host->ocr_avail_sdio; 1135 1136 1137 rocr = mmc_select_voltage(host, ocr); 1138 1139 /* 1140 * Can we support the voltage(s) of the card(s)? 1141 */ 1142 if (!rocr) { 1143 err = -EINVAL; 1144 goto err; 1145 } 1146 1147 /* 1148 * Detect and init the card. 1149 */ 1150 err = mmc_sdio_init_card(host, rocr, NULL, 0); 1151 if (err) 1152 goto err; 1153 1154 card = host->card; 1155 1156 /* 1157 * Enable runtime PM only if supported by host+card+board 1158 */ 1159 if (host->caps & MMC_CAP_POWER_OFF_CARD) { 1160 /* 1161 * Let runtime PM core know our card is active 1162 */ 1163 err = pm_runtime_set_active(&card->dev); 1164 if (err) 1165 goto remove; 1166 1167 /* 1168 * Enable runtime PM for this card 1169 */ 1170 pm_runtime_enable(&card->dev); 1171 } 1172 1173 /* 1174 * The number of functions on the card is encoded inside 1175 * the ocr. 1176 */ 1177 funcs = (ocr & 0x70000000) >> 28; 1178 card->sdio_funcs = 0; 1179 1180 /* 1181 * Initialize (but don't add) all present functions. 1182 */ 1183 for (i = 0; i < funcs; i++, card->sdio_funcs++) { 1184 err = sdio_init_func(host->card, i + 1); 1185 if (err) 1186 goto remove; 1187 1188 /* 1189 * Enable Runtime PM for this func (if supported) 1190 */ 1191 if (host->caps & MMC_CAP_POWER_OFF_CARD) 1192 pm_runtime_enable(&card->sdio_func[i]->dev); 1193 } 1194 1195 /* 1196 * First add the card to the driver model... 1197 */ 1198 mmc_release_host(host); 1199 err = mmc_add_card(host->card); 1200 if (err) 1201 goto remove_added; 1202 1203 /* 1204 * ...then the SDIO functions. 1205 */ 1206 for (i = 0;i < funcs;i++) { 1207 err = sdio_add_func(host->card->sdio_func[i]); 1208 if (err) 1209 goto remove_added; 1210 } 1211 1212 mmc_claim_host(host); 1213 return 0; 1214 1215 1216 remove_added: 1217 /* Remove without lock if the device has been added. */ 1218 mmc_sdio_remove(host); 1219 mmc_claim_host(host); 1220 remove: 1221 /* And with lock if it hasn't been added. */ 1222 mmc_release_host(host); 1223 if (host->card) 1224 mmc_sdio_remove(host); 1225 mmc_claim_host(host); 1226 err: 1227 mmc_detach_bus(host); 1228 1229 pr_err("%s: error %d whilst initialising SDIO card\n", 1230 mmc_hostname(host), err); 1231 1232 return err; 1233 } 1234 1235