mmc/core/mmc_ops.c

/*
 *  linux/drivers/mmc/core/mmc_ops.h
 *
 *  Copyright 2006-2007 Pierre Ossman
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or (at
 * your option) any later version.
 */

#include <linux/slab.h>
#include <linux/export.h>
#include <linux/types.h>
#include <linux/scatterlist.h>

#include <linux/mmc/host.h>
#include <linux/mmc/card.h>
#include <linux/mmc/mmc.h>

#include "core.h"
#include "card.h"
#include "host.h"
#include "mmc_ops.h"

#define MMC_OPS_TIMEOUT_MS	(10 * 60 * 1000) /* 10 minute timeout */

static const u8 tuning_blk_pattern_4bit[] = {
	0xff, 0x0f, 0xff, 0x00, 0xff, 0xcc, 0xc3, 0xcc,
	0xc3, 0x3c, 0xcc, 0xff, 0xfe, 0xff, 0xfe, 0xef,
	0xff, 0xdf, 0xff, 0xdd, 0xff, 0xfb, 0xff, 0xfb,
	0xbf, 0xff, 0x7f, 0xff, 0x77, 0xf7, 0xbd, 0xef,
	0xff, 0xf0, 0xff, 0xf0, 0x0f, 0xfc, 0xcc, 0x3c,
	0xcc, 0x33, 0xcc, 0xcf, 0xff, 0xef, 0xff, 0xee,
	0xff, 0xfd, 0xff, 0xfd, 0xdf, 0xff, 0xbf, 0xff,
	0xbb, 0xff, 0xf7, 0xff, 0xf7, 0x7f, 0x7b, 0xde,
};

static const u8 tuning_blk_pattern_8bit[] = {
	0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00, 0x00,
	0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc, 0xcc,
	0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff, 0xff,
	0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee, 0xff,
	0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd, 0xdd,
	0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff, 0xbb,
	0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff, 0xff,
	0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee, 0xff,
	0xff, 0xff, 0xff, 0x00, 0xff, 0xff, 0xff, 0x00,
	0x00, 0xff, 0xff, 0xcc, 0xcc, 0xcc, 0x33, 0xcc,
	0xcc, 0xcc, 0x33, 0x33, 0xcc, 0xcc, 0xcc, 0xff,
	0xff, 0xff, 0xee, 0xff, 0xff, 0xff, 0xee, 0xee,
	0xff, 0xff, 0xff, 0xdd, 0xff, 0xff, 0xff, 0xdd,
	0xdd, 0xff, 0xff, 0xff, 0xbb, 0xff, 0xff, 0xff,
	0xbb, 0xbb, 0xff, 0xff, 0xff, 0x77, 0xff, 0xff,
	0xff, 0x77, 0x77, 0xff, 0x77, 0xbb, 0xdd, 0xee,
};

int __mmc_send_status(struct mmc_card *card, u32 *status, unsigned int retries)
{
	int err;
	struct mmc_command cmd = {};

	cmd.opcode = MMC_SEND_STATUS;
	if (!mmc_host_is_spi(card->host))
		cmd.arg = card->rca << 16;
	cmd.flags = MMC_RSP_SPI_R2 | MMC_RSP_R1 | MMC_CMD_AC;

	err = mmc_wait_for_cmd(card->host, &cmd, retries);
	if (err)
		return err;

	/* NOTE: callers are required to understand the difference
	 * between "native" and SPI format status words!
	 */
	if (status)
		*status = cmd.resp[0];

	return 0;
}
EXPORT_SYMBOL_GPL(__mmc_send_status);

int mmc_send_status(struct mmc_card *card, u32 *status)
{
	return __mmc_send_status(card, status, MMC_CMD_RETRIES);
}
EXPORT_SYMBOL_GPL(mmc_send_status);

static int _mmc_select_card(struct mmc_host *host, struct mmc_card *card)
{
	struct mmc_command cmd = {};

	cmd.opcode = MMC_SELECT_CARD;

	if (card) {
		cmd.arg = card->rca << 16;
		cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;
	} else {
		cmd.arg = 0;
		cmd.flags = MMC_RSP_NONE | MMC_CMD_AC;
	}

	return mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
}

int mmc_select_card(struct mmc_card *card)
{

	return _mmc_select_card(card->host, card);
}

int mmc_deselect_cards(struct mmc_host *host)
{
	return _mmc_select_card(host, NULL);
}

/*
 * Write the value specified in the device tree or board code into the optional
 * 16 bit Driver Stage Register. This can be used to tune raise/fall times and
 * drive strength of the DAT and CMD outputs. The actual meaning of a given
 * value is hardware dependant.
 * The presence of the DSR register can be determined from the CSD register,
 * bit 76.
 */
int mmc_set_dsr(struct mmc_host *host)
{
	struct mmc_command cmd = {};

	cmd.opcode = MMC_SET_DSR;

	cmd.arg = (host->dsr << 16) | 0xffff;
	cmd.flags = MMC_RSP_NONE | MMC_CMD_AC;

	return mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
}

int mmc_go_idle(struct mmc_host *host)
{
	int err;
	struct mmc_command cmd = {};

	/*
	 * Non-SPI hosts need to prevent chipselect going active during
	 * GO_IDLE; that would put chips into SPI mode.  Remind them of
	 * that in case of hardware that won't pull up DAT3/nCS otherwise.
	 *
	 * SPI hosts ignore ios.chip_select; it's managed according to
	 * rules that must accommodate non-MMC slaves which this layer
	 * won't even know about.
	 */
	if (!mmc_host_is_spi(host)) {
		mmc_set_chip_select(host, MMC_CS_HIGH);
		mmc_delay(1);
	}

	cmd.opcode = MMC_GO_IDLE_STATE;
	cmd.arg = 0;
	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_NONE | MMC_CMD_BC;

	err = mmc_wait_for_cmd(host, &cmd, 0);

	mmc_delay(1);

	if (!mmc_host_is_spi(host)) {
		mmc_set_chip_select(host, MMC_CS_DONTCARE);
		mmc_delay(1);
	}

	host->use_spi_crc = 0;

	return err;
}

int mmc_send_op_cond(struct mmc_host *host, u32 ocr, u32 *rocr)
{
	struct mmc_command cmd = {};
	int i, err = 0;

	cmd.opcode = MMC_SEND_OP_COND;
	cmd.arg = mmc_host_is_spi(host) ? 0 : ocr;
	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R3 | MMC_CMD_BCR;

	for (i = 100; i; i--) {
		err = mmc_wait_for_cmd(host, &cmd, 0);
		if (err)
			break;

		/* if we're just probing, do a single pass */
		if (ocr == 0)
			break;

		/* otherwise wait until reset completes */
		if (mmc_host_is_spi(host)) {
			if (!(cmd.resp[0] & R1_SPI_IDLE))
				break;
		} else {
			if (cmd.resp[0] & MMC_CARD_BUSY)
				break;
		}

		err = -ETIMEDOUT;

		mmc_delay(10);
	}

	if (rocr && !mmc_host_is_spi(host))
		*rocr = cmd.resp[0];

	return err;
}

int mmc_set_relative_addr(struct mmc_card *card)
{
	struct mmc_command cmd = {};

	cmd.opcode = MMC_SET_RELATIVE_ADDR;
	cmd.arg = card->rca << 16;
	cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;

	return mmc_wait_for_cmd(card->host, &cmd, MMC_CMD_RETRIES);
}

static int
mmc_send_cxd_native(struct mmc_host *host, u32 arg, u32 *cxd, int opcode)
{
	int err;
	struct mmc_command cmd = {};

	cmd.opcode = opcode;
	cmd.arg = arg;
	cmd.flags = MMC_RSP_R2 | MMC_CMD_AC;

	err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
	if (err)
		return err;

	memcpy(cxd, cmd.resp, sizeof(u32) * 4);

	return 0;
}

/*
 * NOTE: void *buf, caller for the buf is required to use DMA-capable
 * buffer or on-stack buffer (with some overhead in callee).
 */
static int
mmc_send_cxd_data(struct mmc_card *card, struct mmc_host *host,
		u32 opcode, void *buf, unsigned len)
{
	struct mmc_request mrq = {};
	struct mmc_command cmd = {};
	struct mmc_data data = {};
	struct scatterlist sg;

	mrq.cmd = &cmd;
	mrq.data = &data;

	cmd.opcode = opcode;
	cmd.arg = 0;

	/* NOTE HACK:  the MMC_RSP_SPI_R1 is always correct here, but we
	 * rely on callers to never use this with "native" calls for reading
	 * CSD or CID.  Native versions of those commands use the R2 type,
	 * not R1 plus a data block.
	 */
	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;

	data.blksz = len;
	data.blocks = 1;
	data.flags = MMC_DATA_READ;
	data.sg = &sg;
	data.sg_len = 1;

	sg_init_one(&sg, buf, len);

	if (opcode == MMC_SEND_CSD || opcode == MMC_SEND_CID) {
		/*
		 * The spec states that CSR and CID accesses have a timeout
		 * of 64 clock cycles.
		 */
		data.timeout_ns = 0;
		data.timeout_clks = 64;
	} else
		mmc_set_data_timeout(&data, card);

	mmc_wait_for_req(host, &mrq);

	if (cmd.error)
		return cmd.error;
	if (data.error)
		return data.error;

	return 0;
}

static int mmc_spi_send_csd(struct mmc_card *card, u32 *csd)
{
	int ret, i;
	__be32 *csd_tmp;

	csd_tmp = kzalloc(16, GFP_KERNEL);
	if (!csd_tmp)
		return -ENOMEM;

	ret = mmc_send_cxd_data(card, card->host, MMC_SEND_CSD, csd_tmp, 16);
	if (ret)
		goto err;

	for (i = 0; i < 4; i++)
		csd[i] = be32_to_cpu(csd_tmp[i]);

err:
	kfree(csd_tmp);
	return ret;
}

int mmc_send_csd(struct mmc_card *card, u32 *csd)
{
	if (mmc_host_is_spi(card->host))
		return mmc_spi_send_csd(card, csd);

	return mmc_send_cxd_native(card->host, card->rca << 16,	csd,
				MMC_SEND_CSD);
}

static int mmc_spi_send_cid(struct mmc_host *host, u32 *cid)
{
	int ret, i;
	__be32 *cid_tmp;

	cid_tmp = kzalloc(16, GFP_KERNEL);
	if (!cid_tmp)
		return -ENOMEM;

	ret = mmc_send_cxd_data(NULL, host, MMC_SEND_CID, cid_tmp, 16);
	if (ret)
		goto err;

	for (i = 0; i < 4; i++)
		cid[i] = be32_to_cpu(cid_tmp[i]);

err:
	kfree(cid_tmp);
	return ret;
}

int mmc_send_cid(struct mmc_host *host, u32 *cid)
{
	if (mmc_host_is_spi(host))
		return mmc_spi_send_cid(host, cid);

	return mmc_send_cxd_native(host, 0, cid, MMC_ALL_SEND_CID);
}

int mmc_get_ext_csd(struct mmc_card *card, u8 **new_ext_csd)
{
	int err;
	u8 *ext_csd;

	if (!card || !new_ext_csd)
		return -EINVAL;

	if (!mmc_can_ext_csd(card))
		return -EOPNOTSUPP;

	/*
	 * As the ext_csd is so large and mostly unused, we don't store the
	 * raw block in mmc_card.
	 */
	ext_csd = kzalloc(512, GFP_KERNEL);
	if (!ext_csd)
		return -ENOMEM;

	err = mmc_send_cxd_data(card, card->host, MMC_SEND_EXT_CSD, ext_csd,
				512);
	if (err)
		kfree(ext_csd);
	else
		*new_ext_csd = ext_csd;

	return err;
}
EXPORT_SYMBOL_GPL(mmc_get_ext_csd);

int mmc_spi_read_ocr(struct mmc_host *host, int highcap, u32 *ocrp)
{
	struct mmc_command cmd = {};
	int err;

	cmd.opcode = MMC_SPI_READ_OCR;
	cmd.arg = highcap ? (1 << 30) : 0;
	cmd.flags = MMC_RSP_SPI_R3;

	err = mmc_wait_for_cmd(host, &cmd, 0);

	*ocrp = cmd.resp[1];
	return err;
}

int mmc_spi_set_crc(struct mmc_host *host, int use_crc)
{
	struct mmc_command cmd = {};
	int err;

	cmd.opcode = MMC_SPI_CRC_ON_OFF;
	cmd.flags = MMC_RSP_SPI_R1;
	cmd.arg = use_crc;

	err = mmc_wait_for_cmd(host, &cmd, 0);
	if (!err)
		host->use_spi_crc = use_crc;
	return err;
}

static int mmc_switch_status_error(struct mmc_host *host, u32 status)
{
	if (mmc_host_is_spi(host)) {
		if (status & R1_SPI_ILLEGAL_COMMAND)
			return -EBADMSG;
	} else {
		if (status & 0xFDFFA000)
			pr_warn("%s: unexpected status %#x after switch\n",
				mmc_hostname(host), status);
		if (status & R1_SWITCH_ERROR)
			return -EBADMSG;
	}
	return 0;
}

/* Caller must hold re-tuning */
int __mmc_switch_status(struct mmc_card *card, bool crc_err_fatal)
{
	u32 status;
	int err;

	err = mmc_send_status(card, &status);
	if (!crc_err_fatal && err == -EILSEQ)
		return 0;
	if (err)
		return err;

	return mmc_switch_status_error(card->host, status);
}

int mmc_switch_status(struct mmc_card *card)
{
	return __mmc_switch_status(card, true);
}

static int mmc_poll_for_busy(struct mmc_card *card, unsigned int timeout_ms,
			bool send_status, bool retry_crc_err)
{
	struct mmc_host *host = card->host;
	int err;
	unsigned long timeout;
	u32 status = 0;
	bool expired = false;
	bool busy = false;

	/* We have an unspecified cmd timeout, use the fallback value. */
	if (!timeout_ms)
		timeout_ms = MMC_OPS_TIMEOUT_MS;

	/*
	 * In cases when not allowed to poll by using CMD13 or because we aren't
	 * capable of polling by using ->card_busy(), then rely on waiting the
	 * stated timeout to be sufficient.
	 */
	if (!send_status && !host->ops->card_busy) {
		mmc_delay(timeout_ms);
		return 0;
	}

	timeout = jiffies + msecs_to_jiffies(timeout_ms) + 1;
	do {
		/*
		 * Due to the possibility of being preempted while polling,
		 * check the expiration time first.
		 */
		expired = time_after(jiffies, timeout);

		if (host->ops->card_busy) {
			busy = host->ops->card_busy(host);
		} else {
			err = mmc_send_status(card, &status);
			if (retry_crc_err && err == -EILSEQ) {
				busy = true;
			} else if (err) {
				return err;
			} else {
				err = mmc_switch_status_error(host, status);
				if (err)
					return err;
				busy = R1_CURRENT_STATE(status) == R1_STATE_PRG;
			}
		}

		/* Timeout if the device still remains busy. */
		if (expired && busy) {
			pr_err("%s: Card stuck being busy! %s\n",
				mmc_hostname(host), __func__);
			return -ETIMEDOUT;
		}
	} while (busy);

	return 0;
}

/**
 *	__mmc_switch - modify EXT_CSD register
 *	@card: the MMC card associated with the data transfer
 *	@set: cmd set values
 *	@index: EXT_CSD register index
 *	@value: value to program into EXT_CSD register
 *	@timeout_ms: timeout (ms) for operation performed by register write,
 *                   timeout of zero implies maximum possible timeout
 *	@timing: new timing to change to
 *	@use_busy_signal: use the busy signal as response type
 *	@send_status: send status cmd to poll for busy
 *	@retry_crc_err: retry when CRC errors when polling with CMD13 for busy
 *
 *	Modifies the EXT_CSD register for selected card.
 */
int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
		unsigned int timeout_ms, unsigned char timing,
		bool use_busy_signal, bool send_status,	bool retry_crc_err)
{
	struct mmc_host *host = card->host;
	int err;
	struct mmc_command cmd = {};
	bool use_r1b_resp = use_busy_signal;
	unsigned char old_timing = host->ios.timing;

	mmc_retune_hold(host);

	/*
	 * If the cmd timeout and the max_busy_timeout of the host are both
	 * specified, let's validate them. A failure means we need to prevent
	 * the host from doing hw busy detection, which is done by converting
	 * to a R1 response instead of a R1B.
	 */
	if (timeout_ms && host->max_busy_timeout &&
		(timeout_ms > host->max_busy_timeout))
		use_r1b_resp = false;

	cmd.opcode = MMC_SWITCH;
	cmd.arg = (MMC_SWITCH_MODE_WRITE_BYTE << 24) |
		  (index << 16) |
		  (value << 8) |
		  set;
	cmd.flags = MMC_CMD_AC;
	if (use_r1b_resp) {
		cmd.flags |= MMC_RSP_SPI_R1B | MMC_RSP_R1B;
		/*
		 * A busy_timeout of zero means the host can decide to use
		 * whatever value it finds suitable.
		 */
		cmd.busy_timeout = timeout_ms;
	} else {
		cmd.flags |= MMC_RSP_SPI_R1 | MMC_RSP_R1;
	}

	if (index == EXT_CSD_SANITIZE_START)
		cmd.sanitize_busy = true;

	err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
	if (err)
		goto out;

	/* No need to check card status in case of unblocking command */
	if (!use_busy_signal)
		goto out;

	/*If SPI or used HW busy detection above, then we don't need to poll. */
	if (((host->caps & MMC_CAP_WAIT_WHILE_BUSY) && use_r1b_resp) ||
		mmc_host_is_spi(host))
		goto out_tim;

	/* Let's try to poll to find out when the command is completed. */
	err = mmc_poll_for_busy(card, timeout_ms, send_status, retry_crc_err);
	if (err)
		goto out;

out_tim:
	/* Switch to new timing before check switch status. */
	if (timing)
		mmc_set_timing(host, timing);

	if (send_status) {
		err = mmc_switch_status(card);
		if (err && timing)
			mmc_set_timing(host, old_timing);
	}
out:
	mmc_retune_release(host);

	return err;
}

int mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value,
		unsigned int timeout_ms)
{
	return __mmc_switch(card, set, index, value, timeout_ms, 0,
			true, true, false);
}
EXPORT_SYMBOL_GPL(mmc_switch);

int mmc_send_tuning(struct mmc_host *host, u32 opcode, int *cmd_error)
{
	struct mmc_request mrq = {};
	struct mmc_command cmd = {};
	struct mmc_data data = {};
	struct scatterlist sg;
	struct mmc_ios *ios = &host->ios;
	const u8 *tuning_block_pattern;
	int size, err = 0;
	u8 *data_buf;

	if (ios->bus_width == MMC_BUS_WIDTH_8) {
		tuning_block_pattern = tuning_blk_pattern_8bit;
		size = sizeof(tuning_blk_pattern_8bit);
	} else if (ios->bus_width == MMC_BUS_WIDTH_4) {
		tuning_block_pattern = tuning_blk_pattern_4bit;
		size = sizeof(tuning_blk_pattern_4bit);
	} else
		return -EINVAL;

	data_buf = kzalloc(size, GFP_KERNEL);
	if (!data_buf)
		return -ENOMEM;

	mrq.cmd = &cmd;
	mrq.data = &data;

	cmd.opcode = opcode;
	cmd.flags = MMC_RSP_R1 | MMC_CMD_ADTC;

	data.blksz = size;
	data.blocks = 1;
	data.flags = MMC_DATA_READ;

	/*
	 * According to the tuning specs, Tuning process
	 * is normally shorter 40 executions of CMD19,
	 * and timeout value should be shorter than 150 ms
	 */
	data.timeout_ns = 150 * NSEC_PER_MSEC;

	data.sg = &sg;
	data.sg_len = 1;
	sg_init_one(&sg, data_buf, size);

	mmc_wait_for_req(host, &mrq);

	if (cmd_error)
		*cmd_error = cmd.error;

	if (cmd.error) {
		err = cmd.error;
		goto out;
	}

	if (data.error) {
		err = data.error;
		goto out;
	}

	if (memcmp(data_buf, tuning_block_pattern, size))
		err = -EIO;

out:
	kfree(data_buf);
	return err;
}
EXPORT_SYMBOL_GPL(mmc_send_tuning);

int mmc_abort_tuning(struct mmc_host *host, u32 opcode)
{
	struct mmc_command cmd = {};

	/*
	 * eMMC specification specifies that CMD12 can be used to stop a tuning
	 * command, but SD specification does not, so do nothing unless it is
	 * eMMC.
	 */
	if (opcode != MMC_SEND_TUNING_BLOCK_HS200)
		return 0;

	cmd.opcode = MMC_STOP_TRANSMISSION;
	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;

	/*
	 * For drivers that override R1 to R1b, set an arbitrary timeout based
	 * on the tuning timeout i.e. 150ms.
	 */
	cmd.busy_timeout = 150;

	return mmc_wait_for_cmd(host, &cmd, 0);
}
EXPORT_SYMBOL_GPL(mmc_abort_tuning);

static int
mmc_send_bus_test(struct mmc_card *card, struct mmc_host *host, u8 opcode,
		  u8 len)
{
	struct mmc_request mrq = {};
	struct mmc_command cmd = {};
	struct mmc_data data = {};
	struct scatterlist sg;
	u8 *data_buf;
	u8 *test_buf;
	int i, err;
	static u8 testdata_8bit[8] = { 0x55, 0xaa, 0, 0, 0, 0, 0, 0 };
	static u8 testdata_4bit[4] = { 0x5a, 0, 0, 0 };

	/* dma onto stack is unsafe/nonportable, but callers to this
	 * routine normally provide temporary on-stack buffers ...
	 */
	data_buf = kmalloc(len, GFP_KERNEL);
	if (!data_buf)
		return -ENOMEM;

	if (len == 8)
		test_buf = testdata_8bit;
	else if (len == 4)
		test_buf = testdata_4bit;
	else {
		pr_err("%s: Invalid bus_width %d\n",
		       mmc_hostname(host), len);
		kfree(data_buf);
		return -EINVAL;
	}

	if (opcode == MMC_BUS_TEST_W)
		memcpy(data_buf, test_buf, len);

	mrq.cmd = &cmd;
	mrq.data = &data;
	cmd.opcode = opcode;
	cmd.arg = 0;

	/* NOTE HACK:  the MMC_RSP_SPI_R1 is always correct here, but we
	 * rely on callers to never use this with "native" calls for reading
	 * CSD or CID.  Native versions of those commands use the R2 type,
	 * not R1 plus a data block.
	 */
	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;

	data.blksz = len;
	data.blocks = 1;
	if (opcode == MMC_BUS_TEST_R)
		data.flags = MMC_DATA_READ;
	else
		data.flags = MMC_DATA_WRITE;

	data.sg = &sg;
	data.sg_len = 1;
	mmc_set_data_timeout(&data, card);
	sg_init_one(&sg, data_buf, len);
	mmc_wait_for_req(host, &mrq);
	err = 0;
	if (opcode == MMC_BUS_TEST_R) {
		for (i = 0; i < len / 4; i++)
			if ((test_buf[i] ^ data_buf[i]) != 0xff) {
				err = -EIO;
				break;
			}
	}
	kfree(data_buf);

	if (cmd.error)
		return cmd.error;
	if (data.error)
		return data.error;

	return err;
}

int mmc_bus_test(struct mmc_card *card, u8 bus_width)
{
	int width;

	if (bus_width == MMC_BUS_WIDTH_8)
		width = 8;
	else if (bus_width == MMC_BUS_WIDTH_4)
		width = 4;
	else if (bus_width == MMC_BUS_WIDTH_1)
		return 0; /* no need for test */
	else
		return -EINVAL;

	/*
	 * Ignore errors from BUS_TEST_W.  BUS_TEST_R will fail if there
	 * is a problem.  This improves chances that the test will work.
	 */
	mmc_send_bus_test(card, card->host, MMC_BUS_TEST_W, width);
	return mmc_send_bus_test(card, card->host, MMC_BUS_TEST_R, width);
}

static int mmc_send_hpi_cmd(struct mmc_card *card, u32 *status)
{
	struct mmc_command cmd = {};
	unsigned int opcode;
	int err;

	if (!card->ext_csd.hpi) {
		pr_warn("%s: Card didn't support HPI command\n",
			mmc_hostname(card->host));
		return -EINVAL;
	}

	opcode = card->ext_csd.hpi_cmd;
	if (opcode == MMC_STOP_TRANSMISSION)
		cmd.flags = MMC_RSP_R1B | MMC_CMD_AC;
	else if (opcode == MMC_SEND_STATUS)
		cmd.flags = MMC_RSP_R1 | MMC_CMD_AC;

	cmd.opcode = opcode;
	cmd.arg = card->rca << 16 | 1;

	err = mmc_wait_for_cmd(card->host, &cmd, 0);
	if (err) {
		pr_warn("%s: error %d interrupting operation. "
			"HPI command response %#x\n", mmc_hostname(card->host),
			err, cmd.resp[0]);
		return err;
	}
	if (status)
		*status = cmd.resp[0];

	return 0;
}

/**
 *	mmc_interrupt_hpi - Issue for High priority Interrupt
 *	@card: the MMC card associated with the HPI transfer
 *
 *	Issued High Priority Interrupt, and check for card status
 *	until out-of prg-state.
 */
int mmc_interrupt_hpi(struct mmc_card *card)
{
	int err;
	u32 status;
	unsigned long prg_wait;

	if (!card->ext_csd.hpi_en) {
		pr_info("%s: HPI enable bit unset\n", mmc_hostname(card->host));
		return 1;
	}

	mmc_claim_host(card->host);
	err = mmc_send_status(card, &status);
	if (err) {
		pr_err("%s: Get card status fail\n", mmc_hostname(card->host));
		goto out;
	}

	switch (R1_CURRENT_STATE(status)) {
	case R1_STATE_IDLE:
	case R1_STATE_READY:
	case R1_STATE_STBY:
	case R1_STATE_TRAN:
		/*
		 * In idle and transfer states, HPI is not needed and the caller
		 * can issue the next intended command immediately
		 */
		goto out;
	case R1_STATE_PRG:
		break;
	default:
		/* In all other states, it's illegal to issue HPI */
		pr_debug("%s: HPI cannot be sent. Card state=%d\n",
			mmc_hostname(card->host), R1_CURRENT_STATE(status));
		err = -EINVAL;
		goto out;
	}

	err = mmc_send_hpi_cmd(card, &status);
	if (err)
		goto out;

	prg_wait = jiffies + msecs_to_jiffies(card->ext_csd.out_of_int_time);
	do {
		err = mmc_send_status(card, &status);

		if (!err && R1_CURRENT_STATE(status) == R1_STATE_TRAN)
			break;
		if (time_after(jiffies, prg_wait))
			err = -ETIMEDOUT;
	} while (!err);

out:
	mmc_release_host(card->host);
	return err;
}

int mmc_can_ext_csd(struct mmc_card *card)
{
	return (card && card->csd.mmca_vsn > CSD_SPEC_VER_3);
}

/**
 *	mmc_stop_bkops - stop ongoing BKOPS
 *	@card: MMC card to check BKOPS
 *
 *	Send HPI command to stop ongoing background operations to
 *	allow rapid servicing of foreground operations, e.g. read/
 *	writes. Wait until the card comes out of the programming state
 *	to avoid errors in servicing read/write requests.
 */
int mmc_stop_bkops(struct mmc_card *card)
{
	int err = 0;

	err = mmc_interrupt_hpi(card);

	/*
	 * If err is EINVAL, we can't issue an HPI.
	 * It should complete the BKOPS.
	 */
	if (!err || (err == -EINVAL)) {
		mmc_card_clr_doing_bkops(card);
		mmc_retune_release(card->host);
		err = 0;
	}

	return err;
}

static int mmc_read_bkops_status(struct mmc_card *card)
{
	int err;
	u8 *ext_csd;

	mmc_claim_host(card->host);
	err = mmc_get_ext_csd(card, &ext_csd);
	mmc_release_host(card->host);
	if (err)
		return err;

	card->ext_csd.raw_bkops_status = ext_csd[EXT_CSD_BKOPS_STATUS];
	card->ext_csd.raw_exception_status = ext_csd[EXT_CSD_EXP_EVENTS_STATUS];
	kfree(ext_csd);
	return 0;
}

/**
 *	mmc_start_bkops - start BKOPS for supported cards
 *	@card: MMC card to start BKOPS
 *	@from_exception: A flag to indicate if this function was
 *			 called due to an exception raised by the card
 *
 *	Start background operations whenever requested.
 *	When the urgent BKOPS bit is set in a R1 command response
 *	then background operations should be started immediately.
*/
void mmc_start_bkops(struct mmc_card *card, bool from_exception)
{
	int err;
	int timeout;
	bool use_busy_signal;

	if (!card->ext_csd.man_bkops_en || mmc_card_doing_bkops(card))
		return;

	err = mmc_read_bkops_status(card);
	if (err) {
		pr_err("%s: Failed to read bkops status: %d\n",
		       mmc_hostname(card->host), err);
		return;
	}

	if (!card->ext_csd.raw_bkops_status)
		return;

	if (card->ext_csd.raw_bkops_status < EXT_CSD_BKOPS_LEVEL_2 &&
	    from_exception)
		return;

	if (card->ext_csd.raw_bkops_status >= EXT_CSD_BKOPS_LEVEL_2) {
		timeout = MMC_OPS_TIMEOUT_MS;
		use_busy_signal = true;
	} else {
		timeout = 0;
		use_busy_signal = false;
	}

	mmc_retune_hold(card->host);

	err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
			EXT_CSD_BKOPS_START, 1, timeout, 0,
			use_busy_signal, true, false);
	if (err) {
		pr_warn("%s: Error %d starting bkops\n",
			mmc_hostname(card->host), err);
		mmc_retune_release(card->host);
		return;
	}

	/*
	 * For urgent bkops status (LEVEL_2 and more)
	 * bkops executed synchronously, otherwise
	 * the operation is in progress
	 */
	if (!use_busy_signal)
		mmc_card_set_doing_bkops(card);
	else
		mmc_retune_release(card->host);
}
EXPORT_SYMBOL(mmc_start_bkops);

/*
 * Flush the cache to the non-volatile storage.
 */
int mmc_flush_cache(struct mmc_card *card)
{
	int err = 0;

	if (mmc_card_mmc(card) &&
			(card->ext_csd.cache_size > 0) &&
			(card->ext_csd.cache_ctrl & 1)) {
		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
				EXT_CSD_FLUSH_CACHE, 1, 0);
		if (err)
			pr_err("%s: cache flush error %d\n",
					mmc_hostname(card->host), err);
	}

	return err;
}
EXPORT_SYMBOL(mmc_flush_cache);

static int mmc_cmdq_switch(struct mmc_card *card, bool enable)
{
	u8 val = enable ? EXT_CSD_CMDQ_MODE_ENABLED : 0;
	int err;

	if (!card->ext_csd.cmdq_support)
		return -EOPNOTSUPP;

	err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_CMDQ_MODE_EN,
			 val, card->ext_csd.generic_cmd6_time);
	if (!err)
		card->ext_csd.cmdq_en = enable;

	return err;
}

int mmc_cmdq_enable(struct mmc_card *card)
{
	return mmc_cmdq_switch(card, true);
}
EXPORT_SYMBOL_GPL(mmc_cmdq_enable);

int mmc_cmdq_disable(struct mmc_card *card)
{
	return mmc_cmdq_switch(card, false);
}
EXPORT_SYMBOL_GPL(mmc_cmdq_disable);