xref: /openbmc/linux/drivers/misc/mei/hw.h (revision 2359ccdd)
1 /*
2  *
3  * Intel Management Engine Interface (Intel MEI) Linux driver
4  * Copyright (c) 2003-2012, Intel Corporation.
5  *
6  * This program is free software; you can redistribute it and/or modify it
7  * under the terms and conditions of the GNU General Public License,
8  * version 2, as published by the Free Software Foundation.
9  *
10  * This program is distributed in the hope it will be useful, but WITHOUT
11  * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
12  * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
13  * more details.
14  *
15  */
16 
17 #ifndef _MEI_HW_TYPES_H_
18 #define _MEI_HW_TYPES_H_
19 
20 #include <linux/uuid.h>
21 
22 /*
23  * Timeouts in Seconds
24  */
25 #define MEI_HW_READY_TIMEOUT        2  /* Timeout on ready message */
26 #define MEI_CONNECT_TIMEOUT         3  /* HPS: at least 2 seconds */
27 
28 #define MEI_CL_CONNECT_TIMEOUT     15  /* HPS: Client Connect Timeout */
29 #define MEI_CLIENTS_INIT_TIMEOUT   15  /* HPS: Clients Enumeration Timeout */
30 
31 #define MEI_IAMTHIF_STALL_TIMER    12  /* HPS */
32 
33 #define MEI_PGI_TIMEOUT             1  /* PG Isolation time response 1 sec */
34 #define MEI_D0I3_TIMEOUT            5  /* D0i3 set/unset max response time */
35 #define MEI_HBM_TIMEOUT             1  /* 1 second */
36 
37 /*
38  * MEI Version
39  */
40 #define HBM_MINOR_VERSION                   0
41 #define HBM_MAJOR_VERSION                   2
42 
43 /*
44  * MEI version with PGI support
45  */
46 #define HBM_MINOR_VERSION_PGI               1
47 #define HBM_MAJOR_VERSION_PGI               1
48 
49 /*
50  * MEI version with Dynamic clients support
51  */
52 #define HBM_MINOR_VERSION_DC               0
53 #define HBM_MAJOR_VERSION_DC               2
54 
55 /*
56  * MEI version with immediate reply to enum request support
57  */
58 #define HBM_MINOR_VERSION_IE               0
59 #define HBM_MAJOR_VERSION_IE               2
60 
61 /*
62  * MEI version with disconnect on connection timeout support
63  */
64 #define HBM_MINOR_VERSION_DOT              0
65 #define HBM_MAJOR_VERSION_DOT              2
66 
67 /*
68  * MEI version with notification support
69  */
70 #define HBM_MINOR_VERSION_EV               0
71 #define HBM_MAJOR_VERSION_EV               2
72 
73 /*
74  * MEI version with fixed address client support
75  */
76 #define HBM_MINOR_VERSION_FA               0
77 #define HBM_MAJOR_VERSION_FA               2
78 
79 /*
80  * MEI version with OS ver message support
81  */
82 #define HBM_MINOR_VERSION_OS               0
83 #define HBM_MAJOR_VERSION_OS               2
84 
85 /* Host bus message command opcode */
86 #define MEI_HBM_CMD_OP_MSK                  0x7f
87 /* Host bus message command RESPONSE */
88 #define MEI_HBM_CMD_RES_MSK                 0x80
89 
90 /*
91  * MEI Bus Message Command IDs
92  */
93 #define HOST_START_REQ_CMD                  0x01
94 #define HOST_START_RES_CMD                  0x81
95 
96 #define HOST_STOP_REQ_CMD                   0x02
97 #define HOST_STOP_RES_CMD                   0x82
98 
99 #define ME_STOP_REQ_CMD                     0x03
100 
101 #define HOST_ENUM_REQ_CMD                   0x04
102 #define HOST_ENUM_RES_CMD                   0x84
103 
104 #define HOST_CLIENT_PROPERTIES_REQ_CMD      0x05
105 #define HOST_CLIENT_PROPERTIES_RES_CMD      0x85
106 
107 #define CLIENT_CONNECT_REQ_CMD              0x06
108 #define CLIENT_CONNECT_RES_CMD              0x86
109 
110 #define CLIENT_DISCONNECT_REQ_CMD           0x07
111 #define CLIENT_DISCONNECT_RES_CMD           0x87
112 
113 #define MEI_FLOW_CONTROL_CMD                0x08
114 
115 #define MEI_PG_ISOLATION_ENTRY_REQ_CMD      0x0a
116 #define MEI_PG_ISOLATION_ENTRY_RES_CMD      0x8a
117 #define MEI_PG_ISOLATION_EXIT_REQ_CMD       0x0b
118 #define MEI_PG_ISOLATION_EXIT_RES_CMD       0x8b
119 
120 #define MEI_HBM_ADD_CLIENT_REQ_CMD          0x0f
121 #define MEI_HBM_ADD_CLIENT_RES_CMD          0x8f
122 
123 #define MEI_HBM_NOTIFY_REQ_CMD              0x10
124 #define MEI_HBM_NOTIFY_RES_CMD              0x90
125 #define MEI_HBM_NOTIFICATION_CMD            0x11
126 
127 /*
128  * MEI Stop Reason
129  * used by hbm_host_stop_request.reason
130  */
131 enum mei_stop_reason_types {
132 	DRIVER_STOP_REQUEST = 0x00,
133 	DEVICE_D1_ENTRY = 0x01,
134 	DEVICE_D2_ENTRY = 0x02,
135 	DEVICE_D3_ENTRY = 0x03,
136 	SYSTEM_S1_ENTRY = 0x04,
137 	SYSTEM_S2_ENTRY = 0x05,
138 	SYSTEM_S3_ENTRY = 0x06,
139 	SYSTEM_S4_ENTRY = 0x07,
140 	SYSTEM_S5_ENTRY = 0x08
141 };
142 
143 
144 /**
145  * enum mei_hbm_status  - mei host bus messages return values
146  *
147  * @MEI_HBMS_SUCCESS           : status success
148  * @MEI_HBMS_CLIENT_NOT_FOUND  : client not found
149  * @MEI_HBMS_ALREADY_EXISTS    : connection already established
150  * @MEI_HBMS_REJECTED          : connection is rejected
151  * @MEI_HBMS_INVALID_PARAMETER : invalid parameter
152  * @MEI_HBMS_NOT_ALLOWED       : operation not allowed
153  * @MEI_HBMS_ALREADY_STARTED   : system is already started
154  * @MEI_HBMS_NOT_STARTED       : system not started
155  *
156  * @MEI_HBMS_MAX               : sentinel
157  */
158 enum mei_hbm_status {
159 	MEI_HBMS_SUCCESS           = 0,
160 	MEI_HBMS_CLIENT_NOT_FOUND  = 1,
161 	MEI_HBMS_ALREADY_EXISTS    = 2,
162 	MEI_HBMS_REJECTED          = 3,
163 	MEI_HBMS_INVALID_PARAMETER = 4,
164 	MEI_HBMS_NOT_ALLOWED       = 5,
165 	MEI_HBMS_ALREADY_STARTED   = 6,
166 	MEI_HBMS_NOT_STARTED       = 7,
167 
168 	MEI_HBMS_MAX
169 };
170 
171 
172 /*
173  * Client Connect Status
174  * used by hbm_client_connect_response.status
175  */
176 enum mei_cl_connect_status {
177 	MEI_CL_CONN_SUCCESS          = MEI_HBMS_SUCCESS,
178 	MEI_CL_CONN_NOT_FOUND        = MEI_HBMS_CLIENT_NOT_FOUND,
179 	MEI_CL_CONN_ALREADY_STARTED  = MEI_HBMS_ALREADY_EXISTS,
180 	MEI_CL_CONN_OUT_OF_RESOURCES = MEI_HBMS_REJECTED,
181 	MEI_CL_CONN_MESSAGE_SMALL    = MEI_HBMS_INVALID_PARAMETER,
182 	MEI_CL_CONN_NOT_ALLOWED      = MEI_HBMS_NOT_ALLOWED,
183 };
184 
185 /*
186  * Client Disconnect Status
187  */
188 enum  mei_cl_disconnect_status {
189 	MEI_CL_DISCONN_SUCCESS = MEI_HBMS_SUCCESS
190 };
191 
192 /*
193  *  MEI BUS Interface Section
194  */
195 struct mei_msg_hdr {
196 	u32 me_addr:8;
197 	u32 host_addr:8;
198 	u32 length:9;
199 	u32 reserved:5;
200 	u32 internal:1;
201 	u32 msg_complete:1;
202 } __packed;
203 
204 
205 struct mei_bus_message {
206 	u8 hbm_cmd;
207 	u8 data[0];
208 } __packed;
209 
210 /**
211  * struct hbm_cl_cmd - client specific host bus command
212  *	CONNECT, DISCONNECT, and FlOW CONTROL
213  *
214  * @hbm_cmd: bus message command header
215  * @me_addr: address of the client in ME
216  * @host_addr: address of the client in the driver
217  * @data: generic data
218  */
219 struct mei_hbm_cl_cmd {
220 	u8 hbm_cmd;
221 	u8 me_addr;
222 	u8 host_addr;
223 	u8 data;
224 };
225 
226 struct hbm_version {
227 	u8 minor_version;
228 	u8 major_version;
229 } __packed;
230 
231 struct hbm_host_version_request {
232 	u8 hbm_cmd;
233 	u8 reserved;
234 	struct hbm_version host_version;
235 } __packed;
236 
237 struct hbm_host_version_response {
238 	u8 hbm_cmd;
239 	u8 host_version_supported;
240 	struct hbm_version me_max_version;
241 } __packed;
242 
243 struct hbm_host_stop_request {
244 	u8 hbm_cmd;
245 	u8 reason;
246 	u8 reserved[2];
247 } __packed;
248 
249 struct hbm_host_stop_response {
250 	u8 hbm_cmd;
251 	u8 reserved[3];
252 } __packed;
253 
254 struct hbm_me_stop_request {
255 	u8 hbm_cmd;
256 	u8 reason;
257 	u8 reserved[2];
258 } __packed;
259 
260 /**
261  * enum hbm_host_enum_flags - enumeration request flags (HBM version >= 2.0)
262  *
263  * @MEI_HBM_ENUM_F_ALLOW_ADD: allow dynamic clients add
264  * @MEI_HBM_ENUM_F_IMMEDIATE_ENUM: allow FW to send answer immediately
265  */
266 enum hbm_host_enum_flags {
267 	MEI_HBM_ENUM_F_ALLOW_ADD = BIT(0),
268 	MEI_HBM_ENUM_F_IMMEDIATE_ENUM = BIT(1),
269 };
270 
271 /**
272  * struct hbm_host_enum_request - enumeration request from host to fw
273  *
274  * @hbm_cmd : bus message command header
275  * @flags   : request flags
276  * @reserved: reserved
277  */
278 struct hbm_host_enum_request {
279 	u8 hbm_cmd;
280 	u8 flags;
281 	u8 reserved[2];
282 } __packed;
283 
284 struct hbm_host_enum_response {
285 	u8 hbm_cmd;
286 	u8 reserved[3];
287 	u8 valid_addresses[32];
288 } __packed;
289 
290 struct mei_client_properties {
291 	uuid_le protocol_name;
292 	u8 protocol_version;
293 	u8 max_number_of_connections;
294 	u8 fixed_address;
295 	u8 single_recv_buf;
296 	u32 max_msg_length;
297 } __packed;
298 
299 struct hbm_props_request {
300 	u8 hbm_cmd;
301 	u8 me_addr;
302 	u8 reserved[2];
303 } __packed;
304 
305 struct hbm_props_response {
306 	u8 hbm_cmd;
307 	u8 me_addr;
308 	u8 status;
309 	u8 reserved[1];
310 	struct mei_client_properties client_properties;
311 } __packed;
312 
313 /**
314  * struct hbm_add_client_request - request to add a client
315  *     might be sent by fw after enumeration has already completed
316  *
317  * @hbm_cmd: bus message command header
318  * @me_addr: address of the client in ME
319  * @reserved: reserved
320  * @client_properties: client properties
321  */
322 struct hbm_add_client_request {
323 	u8 hbm_cmd;
324 	u8 me_addr;
325 	u8 reserved[2];
326 	struct mei_client_properties client_properties;
327 } __packed;
328 
329 /**
330  * struct hbm_add_client_response - response to add a client
331  *     sent by the host to report client addition status to fw
332  *
333  * @hbm_cmd: bus message command header
334  * @me_addr: address of the client in ME
335  * @status: if HBMS_SUCCESS then the client can now accept connections.
336  * @reserved: reserved
337  */
338 struct hbm_add_client_response {
339 	u8 hbm_cmd;
340 	u8 me_addr;
341 	u8 status;
342 	u8 reserved[1];
343 } __packed;
344 
345 /**
346  * struct hbm_power_gate - power gate request/response
347  *
348  * @hbm_cmd: bus message command header
349  * @reserved: reserved
350  */
351 struct hbm_power_gate {
352 	u8 hbm_cmd;
353 	u8 reserved[3];
354 } __packed;
355 
356 /**
357  * struct hbm_client_connect_request - connect/disconnect request
358  *
359  * @hbm_cmd: bus message command header
360  * @me_addr: address of the client in ME
361  * @host_addr: address of the client in the driver
362  * @reserved: reserved
363  */
364 struct hbm_client_connect_request {
365 	u8 hbm_cmd;
366 	u8 me_addr;
367 	u8 host_addr;
368 	u8 reserved;
369 } __packed;
370 
371 /**
372  * struct hbm_client_connect_response - connect/disconnect response
373  *
374  * @hbm_cmd: bus message command header
375  * @me_addr: address of the client in ME
376  * @host_addr: address of the client in the driver
377  * @status: status of the request
378  */
379 struct hbm_client_connect_response {
380 	u8 hbm_cmd;
381 	u8 me_addr;
382 	u8 host_addr;
383 	u8 status;
384 } __packed;
385 
386 
387 #define MEI_FC_MESSAGE_RESERVED_LENGTH           5
388 
389 struct hbm_flow_control {
390 	u8 hbm_cmd;
391 	u8 me_addr;
392 	u8 host_addr;
393 	u8 reserved[MEI_FC_MESSAGE_RESERVED_LENGTH];
394 } __packed;
395 
396 #define MEI_HBM_NOTIFICATION_START 1
397 #define MEI_HBM_NOTIFICATION_STOP  0
398 /**
399  * struct hbm_notification_request - start/stop notification request
400  *
401  * @hbm_cmd: bus message command header
402  * @me_addr: address of the client in ME
403  * @host_addr: address of the client in the driver
404  * @start:  start = 1 or stop = 0 asynchronous notifications
405  */
406 struct hbm_notification_request {
407 	u8 hbm_cmd;
408 	u8 me_addr;
409 	u8 host_addr;
410 	u8 start;
411 } __packed;
412 
413 /**
414  * struct hbm_notification_response - start/stop notification response
415  *
416  * @hbm_cmd: bus message command header
417  * @me_addr: address of the client in ME
418  * @host_addr: - address of the client in the driver
419  * @status: (mei_hbm_status) response status for the request
420  *  - MEI_HBMS_SUCCESS: successful stop/start
421  *  - MEI_HBMS_CLIENT_NOT_FOUND: if the connection could not be found.
422  *  - MEI_HBMS_ALREADY_STARTED: for start requests for a previously
423  *                         started notification.
424  *  - MEI_HBMS_NOT_STARTED: for stop request for a connected client for whom
425  *                         asynchronous notifications are currently disabled.
426  *
427  * @start:  start = 1 or stop = 0 asynchronous notifications
428  * @reserved: reserved
429  */
430 struct hbm_notification_response {
431 	u8 hbm_cmd;
432 	u8 me_addr;
433 	u8 host_addr;
434 	u8 status;
435 	u8 start;
436 	u8 reserved[3];
437 } __packed;
438 
439 /**
440  * struct hbm_notification - notification event
441  *
442  * @hbm_cmd: bus message command header
443  * @me_addr:  address of the client in ME
444  * @host_addr:  address of the client in the driver
445  * @reserved: reserved for alignment
446  */
447 struct hbm_notification {
448 	u8 hbm_cmd;
449 	u8 me_addr;
450 	u8 host_addr;
451 	u8 reserved[1];
452 } __packed;
453 
454 #endif
455