1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Copyright © 2019 Intel Corporation 4 * 5 * mei_hdcp.c: HDCP client driver for mei bus 6 * 7 * Author: 8 * Ramalingam C <ramalingam.c@intel.com> 9 */ 10 11 /** 12 * DOC: MEI_HDCP Client Driver 13 * 14 * The mei_hdcp driver acts as a translation layer between HDCP 2.2 15 * protocol implementer (I915) and ME FW by translating HDCP2.2 16 * negotiation messages to ME FW command payloads and vice versa. 17 */ 18 19 #include <linux/module.h> 20 #include <linux/slab.h> 21 #include <linux/uuid.h> 22 #include <linux/mei_cl_bus.h> 23 #include <linux/component.h> 24 #include <drm/drm_connector.h> 25 #include <drm/i915_component.h> 26 #include <drm/i915_mei_hdcp_interface.h> 27 28 #include "mei_hdcp.h" 29 30 /** 31 * mei_hdcp_initiate_session() - Initiate a Wired HDCP2.2 Tx Session in ME FW 32 * @dev: device corresponding to the mei_cl_device 33 * @data: Intel HW specific hdcp data 34 * @ake_data: AKE_Init msg output. 35 * 36 * Return: 0 on Success, <0 on Failure. 37 */ 38 static int 39 mei_hdcp_initiate_session(struct device *dev, struct hdcp_port_data *data, 40 struct hdcp2_ake_init *ake_data) 41 { 42 struct wired_cmd_initiate_hdcp2_session_in session_init_in = { { 0 } }; 43 struct wired_cmd_initiate_hdcp2_session_out 44 session_init_out = { { 0 } }; 45 struct mei_cl_device *cldev; 46 ssize_t byte; 47 48 if (!dev || !data || !ake_data) 49 return -EINVAL; 50 51 cldev = to_mei_cl_device(dev); 52 53 session_init_in.header.api_version = HDCP_API_VERSION; 54 session_init_in.header.command_id = WIRED_INITIATE_HDCP2_SESSION; 55 session_init_in.header.status = ME_HDCP_STATUS_SUCCESS; 56 session_init_in.header.buffer_len = 57 WIRED_CMD_BUF_LEN_INITIATE_HDCP2_SESSION_IN; 58 59 session_init_in.port.integrated_port_type = data->port_type; 60 session_init_in.port.physical_port = (u8)data->fw_ddi; 61 session_init_in.port.attached_transcoder = (u8)data->fw_tc; 62 session_init_in.protocol = data->protocol; 63 64 byte = mei_cldev_send(cldev, (u8 *)&session_init_in, 65 sizeof(session_init_in)); 66 if (byte < 0) { 67 dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); 68 return byte; 69 } 70 71 byte = mei_cldev_recv(cldev, (u8 *)&session_init_out, 72 sizeof(session_init_out)); 73 if (byte < 0) { 74 dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); 75 return byte; 76 } 77 78 if (session_init_out.header.status != ME_HDCP_STATUS_SUCCESS) { 79 dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n", 80 WIRED_INITIATE_HDCP2_SESSION, 81 session_init_out.header.status); 82 return -EIO; 83 } 84 85 ake_data->msg_id = HDCP_2_2_AKE_INIT; 86 ake_data->tx_caps = session_init_out.tx_caps; 87 memcpy(ake_data->r_tx, session_init_out.r_tx, HDCP_2_2_RTX_LEN); 88 89 return 0; 90 } 91 92 /** 93 * mei_hdcp_verify_receiver_cert_prepare_km() - Verify the Receiver Certificate 94 * AKE_Send_Cert and prepare AKE_Stored_Km/AKE_No_Stored_Km 95 * @dev: device corresponding to the mei_cl_device 96 * @data: Intel HW specific hdcp data 97 * @rx_cert: AKE_Send_Cert for verification 98 * @km_stored: Pairing status flag output 99 * @ek_pub_km: AKE_Stored_Km/AKE_No_Stored_Km output msg 100 * @msg_sz : size of AKE_XXXXX_Km output msg 101 * 102 * Return: 0 on Success, <0 on Failure 103 */ 104 static int 105 mei_hdcp_verify_receiver_cert_prepare_km(struct device *dev, 106 struct hdcp_port_data *data, 107 struct hdcp2_ake_send_cert *rx_cert, 108 bool *km_stored, 109 struct hdcp2_ake_no_stored_km 110 *ek_pub_km, 111 size_t *msg_sz) 112 { 113 struct wired_cmd_verify_receiver_cert_in verify_rxcert_in = { { 0 } }; 114 struct wired_cmd_verify_receiver_cert_out verify_rxcert_out = { { 0 } }; 115 struct mei_cl_device *cldev; 116 ssize_t byte; 117 118 if (!dev || !data || !rx_cert || !km_stored || !ek_pub_km || !msg_sz) 119 return -EINVAL; 120 121 cldev = to_mei_cl_device(dev); 122 123 verify_rxcert_in.header.api_version = HDCP_API_VERSION; 124 verify_rxcert_in.header.command_id = WIRED_VERIFY_RECEIVER_CERT; 125 verify_rxcert_in.header.status = ME_HDCP_STATUS_SUCCESS; 126 verify_rxcert_in.header.buffer_len = 127 WIRED_CMD_BUF_LEN_VERIFY_RECEIVER_CERT_IN; 128 129 verify_rxcert_in.port.integrated_port_type = data->port_type; 130 verify_rxcert_in.port.physical_port = (u8)data->fw_ddi; 131 verify_rxcert_in.port.attached_transcoder = (u8)data->fw_tc; 132 133 verify_rxcert_in.cert_rx = rx_cert->cert_rx; 134 memcpy(verify_rxcert_in.r_rx, &rx_cert->r_rx, HDCP_2_2_RRX_LEN); 135 memcpy(verify_rxcert_in.rx_caps, rx_cert->rx_caps, HDCP_2_2_RXCAPS_LEN); 136 137 byte = mei_cldev_send(cldev, (u8 *)&verify_rxcert_in, 138 sizeof(verify_rxcert_in)); 139 if (byte < 0) { 140 dev_dbg(dev, "mei_cldev_send failed: %zd\n", byte); 141 return byte; 142 } 143 144 byte = mei_cldev_recv(cldev, (u8 *)&verify_rxcert_out, 145 sizeof(verify_rxcert_out)); 146 if (byte < 0) { 147 dev_dbg(dev, "mei_cldev_recv failed: %zd\n", byte); 148 return byte; 149 } 150 151 if (verify_rxcert_out.header.status != ME_HDCP_STATUS_SUCCESS) { 152 dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n", 153 WIRED_VERIFY_RECEIVER_CERT, 154 verify_rxcert_out.header.status); 155 return -EIO; 156 } 157 158 *km_stored = !!verify_rxcert_out.km_stored; 159 if (verify_rxcert_out.km_stored) { 160 ek_pub_km->msg_id = HDCP_2_2_AKE_STORED_KM; 161 *msg_sz = sizeof(struct hdcp2_ake_stored_km); 162 } else { 163 ek_pub_km->msg_id = HDCP_2_2_AKE_NO_STORED_KM; 164 *msg_sz = sizeof(struct hdcp2_ake_no_stored_km); 165 } 166 167 memcpy(ek_pub_km->e_kpub_km, &verify_rxcert_out.ekm_buff, 168 sizeof(verify_rxcert_out.ekm_buff)); 169 170 return 0; 171 } 172 173 /** 174 * mei_hdcp_verify_hprime() - Verify AKE_Send_H_prime at ME FW. 175 * @dev: device corresponding to the mei_cl_device 176 * @data: Intel HW specific hdcp data 177 * @rx_hprime: AKE_Send_H_prime msg for ME FW verification 178 * 179 * Return: 0 on Success, <0 on Failure 180 */ 181 static int 182 mei_hdcp_verify_hprime(struct device *dev, struct hdcp_port_data *data, 183 struct hdcp2_ake_send_hprime *rx_hprime) 184 { 185 struct wired_cmd_ake_send_hprime_in send_hprime_in = { { 0 } }; 186 struct wired_cmd_ake_send_hprime_out send_hprime_out = { { 0 } }; 187 struct mei_cl_device *cldev; 188 ssize_t byte; 189 190 if (!dev || !data || !rx_hprime) 191 return -EINVAL; 192 193 cldev = to_mei_cl_device(dev); 194 195 send_hprime_in.header.api_version = HDCP_API_VERSION; 196 send_hprime_in.header.command_id = WIRED_AKE_SEND_HPRIME; 197 send_hprime_in.header.status = ME_HDCP_STATUS_SUCCESS; 198 send_hprime_in.header.buffer_len = WIRED_CMD_BUF_LEN_AKE_SEND_HPRIME_IN; 199 200 send_hprime_in.port.integrated_port_type = data->port_type; 201 send_hprime_in.port.physical_port = (u8)data->fw_ddi; 202 send_hprime_in.port.attached_transcoder = (u8)data->fw_tc; 203 204 memcpy(send_hprime_in.h_prime, rx_hprime->h_prime, 205 HDCP_2_2_H_PRIME_LEN); 206 207 byte = mei_cldev_send(cldev, (u8 *)&send_hprime_in, 208 sizeof(send_hprime_in)); 209 if (byte < 0) { 210 dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); 211 return byte; 212 } 213 214 byte = mei_cldev_recv(cldev, (u8 *)&send_hprime_out, 215 sizeof(send_hprime_out)); 216 if (byte < 0) { 217 dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); 218 return byte; 219 } 220 221 if (send_hprime_out.header.status != ME_HDCP_STATUS_SUCCESS) { 222 dev_dbg(dev, "ME cmd 0x%08X Failed. Status: 0x%X\n", 223 WIRED_AKE_SEND_HPRIME, send_hprime_out.header.status); 224 return -EIO; 225 } 226 227 return 0; 228 } 229 230 /** 231 * mei_hdcp_store_pairing_info() - Store pairing info received at ME FW 232 * @dev: device corresponding to the mei_cl_device 233 * @data: Intel HW specific hdcp data 234 * @pairing_info: AKE_Send_Pairing_Info msg input to ME FW 235 * 236 * Return: 0 on Success, <0 on Failure 237 */ 238 static int 239 mei_hdcp_store_pairing_info(struct device *dev, struct hdcp_port_data *data, 240 struct hdcp2_ake_send_pairing_info *pairing_info) 241 { 242 struct wired_cmd_ake_send_pairing_info_in pairing_info_in = { { 0 } }; 243 struct wired_cmd_ake_send_pairing_info_out pairing_info_out = { { 0 } }; 244 struct mei_cl_device *cldev; 245 ssize_t byte; 246 247 if (!dev || !data || !pairing_info) 248 return -EINVAL; 249 250 cldev = to_mei_cl_device(dev); 251 252 pairing_info_in.header.api_version = HDCP_API_VERSION; 253 pairing_info_in.header.command_id = WIRED_AKE_SEND_PAIRING_INFO; 254 pairing_info_in.header.status = ME_HDCP_STATUS_SUCCESS; 255 pairing_info_in.header.buffer_len = 256 WIRED_CMD_BUF_LEN_SEND_PAIRING_INFO_IN; 257 258 pairing_info_in.port.integrated_port_type = data->port_type; 259 pairing_info_in.port.physical_port = (u8)data->fw_ddi; 260 pairing_info_in.port.attached_transcoder = (u8)data->fw_tc; 261 262 memcpy(pairing_info_in.e_kh_km, pairing_info->e_kh_km, 263 HDCP_2_2_E_KH_KM_LEN); 264 265 byte = mei_cldev_send(cldev, (u8 *)&pairing_info_in, 266 sizeof(pairing_info_in)); 267 if (byte < 0) { 268 dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); 269 return byte; 270 } 271 272 byte = mei_cldev_recv(cldev, (u8 *)&pairing_info_out, 273 sizeof(pairing_info_out)); 274 if (byte < 0) { 275 dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); 276 return byte; 277 } 278 279 if (pairing_info_out.header.status != ME_HDCP_STATUS_SUCCESS) { 280 dev_dbg(dev, "ME cmd 0x%08X failed. Status: 0x%X\n", 281 WIRED_AKE_SEND_PAIRING_INFO, 282 pairing_info_out.header.status); 283 return -EIO; 284 } 285 286 return 0; 287 } 288 289 /** 290 * mei_hdcp_initiate_locality_check() - Prepare LC_Init 291 * @dev: device corresponding to the mei_cl_device 292 * @data: Intel HW specific hdcp data 293 * @lc_init_data: LC_Init msg output 294 * 295 * Return: 0 on Success, <0 on Failure 296 */ 297 static int 298 mei_hdcp_initiate_locality_check(struct device *dev, 299 struct hdcp_port_data *data, 300 struct hdcp2_lc_init *lc_init_data) 301 { 302 struct wired_cmd_init_locality_check_in lc_init_in = { { 0 } }; 303 struct wired_cmd_init_locality_check_out lc_init_out = { { 0 } }; 304 struct mei_cl_device *cldev; 305 ssize_t byte; 306 307 if (!dev || !data || !lc_init_data) 308 return -EINVAL; 309 310 cldev = to_mei_cl_device(dev); 311 312 lc_init_in.header.api_version = HDCP_API_VERSION; 313 lc_init_in.header.command_id = WIRED_INIT_LOCALITY_CHECK; 314 lc_init_in.header.status = ME_HDCP_STATUS_SUCCESS; 315 lc_init_in.header.buffer_len = WIRED_CMD_BUF_LEN_INIT_LOCALITY_CHECK_IN; 316 317 lc_init_in.port.integrated_port_type = data->port_type; 318 lc_init_in.port.physical_port = (u8)data->fw_ddi; 319 lc_init_in.port.attached_transcoder = (u8)data->fw_tc; 320 321 byte = mei_cldev_send(cldev, (u8 *)&lc_init_in, sizeof(lc_init_in)); 322 if (byte < 0) { 323 dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); 324 return byte; 325 } 326 327 byte = mei_cldev_recv(cldev, (u8 *)&lc_init_out, sizeof(lc_init_out)); 328 if (byte < 0) { 329 dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); 330 return byte; 331 } 332 333 if (lc_init_out.header.status != ME_HDCP_STATUS_SUCCESS) { 334 dev_dbg(dev, "ME cmd 0x%08X Failed. status: 0x%X\n", 335 WIRED_INIT_LOCALITY_CHECK, lc_init_out.header.status); 336 return -EIO; 337 } 338 339 lc_init_data->msg_id = HDCP_2_2_LC_INIT; 340 memcpy(lc_init_data->r_n, lc_init_out.r_n, HDCP_2_2_RN_LEN); 341 342 return 0; 343 } 344 345 /** 346 * mei_hdcp_verify_lprime() - Verify lprime. 347 * @dev: device corresponding to the mei_cl_device 348 * @data: Intel HW specific hdcp data 349 * @rx_lprime: LC_Send_L_prime msg for ME FW verification 350 * 351 * Return: 0 on Success, <0 on Failure 352 */ 353 static int 354 mei_hdcp_verify_lprime(struct device *dev, struct hdcp_port_data *data, 355 struct hdcp2_lc_send_lprime *rx_lprime) 356 { 357 struct wired_cmd_validate_locality_in verify_lprime_in = { { 0 } }; 358 struct wired_cmd_validate_locality_out verify_lprime_out = { { 0 } }; 359 struct mei_cl_device *cldev; 360 ssize_t byte; 361 362 if (!dev || !data || !rx_lprime) 363 return -EINVAL; 364 365 cldev = to_mei_cl_device(dev); 366 367 verify_lprime_in.header.api_version = HDCP_API_VERSION; 368 verify_lprime_in.header.command_id = WIRED_VALIDATE_LOCALITY; 369 verify_lprime_in.header.status = ME_HDCP_STATUS_SUCCESS; 370 verify_lprime_in.header.buffer_len = 371 WIRED_CMD_BUF_LEN_VALIDATE_LOCALITY_IN; 372 373 verify_lprime_in.port.integrated_port_type = data->port_type; 374 verify_lprime_in.port.physical_port = (u8)data->fw_ddi; 375 verify_lprime_in.port.attached_transcoder = (u8)data->fw_tc; 376 377 memcpy(verify_lprime_in.l_prime, rx_lprime->l_prime, 378 HDCP_2_2_L_PRIME_LEN); 379 380 byte = mei_cldev_send(cldev, (u8 *)&verify_lprime_in, 381 sizeof(verify_lprime_in)); 382 if (byte < 0) { 383 dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); 384 return byte; 385 } 386 387 byte = mei_cldev_recv(cldev, (u8 *)&verify_lprime_out, 388 sizeof(verify_lprime_out)); 389 if (byte < 0) { 390 dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); 391 return byte; 392 } 393 394 if (verify_lprime_out.header.status != ME_HDCP_STATUS_SUCCESS) { 395 dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n", 396 WIRED_VALIDATE_LOCALITY, 397 verify_lprime_out.header.status); 398 return -EIO; 399 } 400 401 return 0; 402 } 403 404 /** 405 * mei_hdcp_get_session_key() - Prepare SKE_Send_Eks. 406 * @dev: device corresponding to the mei_cl_device 407 * @data: Intel HW specific hdcp data 408 * @ske_data: SKE_Send_Eks msg output from ME FW. 409 * 410 * Return: 0 on Success, <0 on Failure 411 */ 412 static int mei_hdcp_get_session_key(struct device *dev, 413 struct hdcp_port_data *data, 414 struct hdcp2_ske_send_eks *ske_data) 415 { 416 struct wired_cmd_get_session_key_in get_skey_in = { { 0 } }; 417 struct wired_cmd_get_session_key_out get_skey_out = { { 0 } }; 418 struct mei_cl_device *cldev; 419 ssize_t byte; 420 421 if (!dev || !data || !ske_data) 422 return -EINVAL; 423 424 cldev = to_mei_cl_device(dev); 425 426 get_skey_in.header.api_version = HDCP_API_VERSION; 427 get_skey_in.header.command_id = WIRED_GET_SESSION_KEY; 428 get_skey_in.header.status = ME_HDCP_STATUS_SUCCESS; 429 get_skey_in.header.buffer_len = WIRED_CMD_BUF_LEN_GET_SESSION_KEY_IN; 430 431 get_skey_in.port.integrated_port_type = data->port_type; 432 get_skey_in.port.physical_port = (u8)data->fw_ddi; 433 get_skey_in.port.attached_transcoder = (u8)data->fw_tc; 434 435 byte = mei_cldev_send(cldev, (u8 *)&get_skey_in, sizeof(get_skey_in)); 436 if (byte < 0) { 437 dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); 438 return byte; 439 } 440 441 byte = mei_cldev_recv(cldev, (u8 *)&get_skey_out, sizeof(get_skey_out)); 442 443 if (byte < 0) { 444 dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); 445 return byte; 446 } 447 448 if (get_skey_out.header.status != ME_HDCP_STATUS_SUCCESS) { 449 dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n", 450 WIRED_GET_SESSION_KEY, get_skey_out.header.status); 451 return -EIO; 452 } 453 454 ske_data->msg_id = HDCP_2_2_SKE_SEND_EKS; 455 memcpy(ske_data->e_dkey_ks, get_skey_out.e_dkey_ks, 456 HDCP_2_2_E_DKEY_KS_LEN); 457 memcpy(ske_data->riv, get_skey_out.r_iv, HDCP_2_2_RIV_LEN); 458 459 return 0; 460 } 461 462 /** 463 * mei_hdcp_repeater_check_flow_prepare_ack() - Validate the Downstream topology 464 * and prepare rep_ack. 465 * @dev: device corresponding to the mei_cl_device 466 * @data: Intel HW specific hdcp data 467 * @rep_topology: Receiver ID List to be validated 468 * @rep_send_ack : repeater ack from ME FW. 469 * 470 * Return: 0 on Success, <0 on Failure 471 */ 472 static int 473 mei_hdcp_repeater_check_flow_prepare_ack(struct device *dev, 474 struct hdcp_port_data *data, 475 struct hdcp2_rep_send_receiverid_list 476 *rep_topology, 477 struct hdcp2_rep_send_ack 478 *rep_send_ack) 479 { 480 struct wired_cmd_verify_repeater_in verify_repeater_in = { { 0 } }; 481 struct wired_cmd_verify_repeater_out verify_repeater_out = { { 0 } }; 482 struct mei_cl_device *cldev; 483 ssize_t byte; 484 485 if (!dev || !rep_topology || !rep_send_ack || !data) 486 return -EINVAL; 487 488 cldev = to_mei_cl_device(dev); 489 490 verify_repeater_in.header.api_version = HDCP_API_VERSION; 491 verify_repeater_in.header.command_id = WIRED_VERIFY_REPEATER; 492 verify_repeater_in.header.status = ME_HDCP_STATUS_SUCCESS; 493 verify_repeater_in.header.buffer_len = 494 WIRED_CMD_BUF_LEN_VERIFY_REPEATER_IN; 495 496 verify_repeater_in.port.integrated_port_type = data->port_type; 497 verify_repeater_in.port.physical_port = (u8)data->fw_ddi; 498 verify_repeater_in.port.attached_transcoder = (u8)data->fw_tc; 499 500 memcpy(verify_repeater_in.rx_info, rep_topology->rx_info, 501 HDCP_2_2_RXINFO_LEN); 502 memcpy(verify_repeater_in.seq_num_v, rep_topology->seq_num_v, 503 HDCP_2_2_SEQ_NUM_LEN); 504 memcpy(verify_repeater_in.v_prime, rep_topology->v_prime, 505 HDCP_2_2_V_PRIME_HALF_LEN); 506 memcpy(verify_repeater_in.receiver_ids, rep_topology->receiver_ids, 507 HDCP_2_2_RECEIVER_IDS_MAX_LEN); 508 509 byte = mei_cldev_send(cldev, (u8 *)&verify_repeater_in, 510 sizeof(verify_repeater_in)); 511 if (byte < 0) { 512 dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); 513 return byte; 514 } 515 516 byte = mei_cldev_recv(cldev, (u8 *)&verify_repeater_out, 517 sizeof(verify_repeater_out)); 518 if (byte < 0) { 519 dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); 520 return byte; 521 } 522 523 if (verify_repeater_out.header.status != ME_HDCP_STATUS_SUCCESS) { 524 dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n", 525 WIRED_VERIFY_REPEATER, 526 verify_repeater_out.header.status); 527 return -EIO; 528 } 529 530 memcpy(rep_send_ack->v, verify_repeater_out.v, 531 HDCP_2_2_V_PRIME_HALF_LEN); 532 rep_send_ack->msg_id = HDCP_2_2_REP_SEND_ACK; 533 534 return 0; 535 } 536 537 /** 538 * mei_hdcp_verify_mprime() - Verify mprime. 539 * @dev: device corresponding to the mei_cl_device 540 * @data: Intel HW specific hdcp data 541 * @stream_ready: RepeaterAuth_Stream_Ready msg for ME FW verification. 542 * 543 * Return: 0 on Success, <0 on Failure 544 */ 545 static int mei_hdcp_verify_mprime(struct device *dev, 546 struct hdcp_port_data *data, 547 struct hdcp2_rep_stream_ready *stream_ready) 548 { 549 struct wired_cmd_repeater_auth_stream_req_in *verify_mprime_in; 550 struct wired_cmd_repeater_auth_stream_req_out 551 verify_mprime_out = { { 0 } }; 552 struct mei_cl_device *cldev; 553 ssize_t byte; 554 size_t cmd_size; 555 556 if (!dev || !stream_ready || !data) 557 return -EINVAL; 558 559 cldev = to_mei_cl_device(dev); 560 561 cmd_size = struct_size(verify_mprime_in, streams, data->k); 562 if (cmd_size == SIZE_MAX) 563 return -EINVAL; 564 565 verify_mprime_in = kzalloc(cmd_size, GFP_KERNEL); 566 if (!verify_mprime_in) 567 return -ENOMEM; 568 569 verify_mprime_in->header.api_version = HDCP_API_VERSION; 570 verify_mprime_in->header.command_id = WIRED_REPEATER_AUTH_STREAM_REQ; 571 verify_mprime_in->header.status = ME_HDCP_STATUS_SUCCESS; 572 verify_mprime_in->header.buffer_len = cmd_size - sizeof(verify_mprime_in->header); 573 574 verify_mprime_in->port.integrated_port_type = data->port_type; 575 verify_mprime_in->port.physical_port = (u8)data->fw_ddi; 576 verify_mprime_in->port.attached_transcoder = (u8)data->fw_tc; 577 578 memcpy(verify_mprime_in->m_prime, stream_ready->m_prime, HDCP_2_2_MPRIME_LEN); 579 drm_hdcp_cpu_to_be24(verify_mprime_in->seq_num_m, data->seq_num_m); 580 581 memcpy(verify_mprime_in->streams, data->streams, 582 array_size(data->k, sizeof(*data->streams))); 583 584 verify_mprime_in->k = cpu_to_be16(data->k); 585 586 byte = mei_cldev_send(cldev, (u8 *)verify_mprime_in, cmd_size); 587 kfree(verify_mprime_in); 588 if (byte < 0) { 589 dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); 590 return byte; 591 } 592 593 byte = mei_cldev_recv(cldev, (u8 *)&verify_mprime_out, 594 sizeof(verify_mprime_out)); 595 if (byte < 0) { 596 dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); 597 return byte; 598 } 599 600 if (verify_mprime_out.header.status != ME_HDCP_STATUS_SUCCESS) { 601 dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n", 602 WIRED_REPEATER_AUTH_STREAM_REQ, 603 verify_mprime_out.header.status); 604 return -EIO; 605 } 606 607 return 0; 608 } 609 610 /** 611 * mei_hdcp_enable_authentication() - Mark a port as authenticated 612 * through ME FW 613 * @dev: device corresponding to the mei_cl_device 614 * @data: Intel HW specific hdcp data 615 * 616 * Return: 0 on Success, <0 on Failure 617 */ 618 static int mei_hdcp_enable_authentication(struct device *dev, 619 struct hdcp_port_data *data) 620 { 621 struct wired_cmd_enable_auth_in enable_auth_in = { { 0 } }; 622 struct wired_cmd_enable_auth_out enable_auth_out = { { 0 } }; 623 struct mei_cl_device *cldev; 624 ssize_t byte; 625 626 if (!dev || !data) 627 return -EINVAL; 628 629 cldev = to_mei_cl_device(dev); 630 631 enable_auth_in.header.api_version = HDCP_API_VERSION; 632 enable_auth_in.header.command_id = WIRED_ENABLE_AUTH; 633 enable_auth_in.header.status = ME_HDCP_STATUS_SUCCESS; 634 enable_auth_in.header.buffer_len = WIRED_CMD_BUF_LEN_ENABLE_AUTH_IN; 635 636 enable_auth_in.port.integrated_port_type = data->port_type; 637 enable_auth_in.port.physical_port = (u8)data->fw_ddi; 638 enable_auth_in.port.attached_transcoder = (u8)data->fw_tc; 639 enable_auth_in.stream_type = data->streams[0].stream_type; 640 641 byte = mei_cldev_send(cldev, (u8 *)&enable_auth_in, 642 sizeof(enable_auth_in)); 643 if (byte < 0) { 644 dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); 645 return byte; 646 } 647 648 byte = mei_cldev_recv(cldev, (u8 *)&enable_auth_out, 649 sizeof(enable_auth_out)); 650 if (byte < 0) { 651 dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); 652 return byte; 653 } 654 655 if (enable_auth_out.header.status != ME_HDCP_STATUS_SUCCESS) { 656 dev_dbg(dev, "ME cmd 0x%08X failed. status: 0x%X\n", 657 WIRED_ENABLE_AUTH, enable_auth_out.header.status); 658 return -EIO; 659 } 660 661 return 0; 662 } 663 664 /** 665 * mei_hdcp_close_session() - Close the Wired HDCP Tx session of ME FW per port. 666 * This also disables the authenticated state of the port. 667 * @dev: device corresponding to the mei_cl_device 668 * @data: Intel HW specific hdcp data 669 * 670 * Return: 0 on Success, <0 on Failure 671 */ 672 static int 673 mei_hdcp_close_session(struct device *dev, struct hdcp_port_data *data) 674 { 675 struct wired_cmd_close_session_in session_close_in = { { 0 } }; 676 struct wired_cmd_close_session_out session_close_out = { { 0 } }; 677 struct mei_cl_device *cldev; 678 ssize_t byte; 679 680 if (!dev || !data) 681 return -EINVAL; 682 683 cldev = to_mei_cl_device(dev); 684 685 session_close_in.header.api_version = HDCP_API_VERSION; 686 session_close_in.header.command_id = WIRED_CLOSE_SESSION; 687 session_close_in.header.status = ME_HDCP_STATUS_SUCCESS; 688 session_close_in.header.buffer_len = 689 WIRED_CMD_BUF_LEN_CLOSE_SESSION_IN; 690 691 session_close_in.port.integrated_port_type = data->port_type; 692 session_close_in.port.physical_port = (u8)data->fw_ddi; 693 session_close_in.port.attached_transcoder = (u8)data->fw_tc; 694 695 byte = mei_cldev_send(cldev, (u8 *)&session_close_in, 696 sizeof(session_close_in)); 697 if (byte < 0) { 698 dev_dbg(dev, "mei_cldev_send failed. %zd\n", byte); 699 return byte; 700 } 701 702 byte = mei_cldev_recv(cldev, (u8 *)&session_close_out, 703 sizeof(session_close_out)); 704 if (byte < 0) { 705 dev_dbg(dev, "mei_cldev_recv failed. %zd\n", byte); 706 return byte; 707 } 708 709 if (session_close_out.header.status != ME_HDCP_STATUS_SUCCESS) { 710 dev_dbg(dev, "Session Close Failed. status: 0x%X\n", 711 session_close_out.header.status); 712 return -EIO; 713 } 714 715 return 0; 716 } 717 718 static const struct i915_hdcp_component_ops mei_hdcp_ops = { 719 .owner = THIS_MODULE, 720 .initiate_hdcp2_session = mei_hdcp_initiate_session, 721 .verify_receiver_cert_prepare_km = 722 mei_hdcp_verify_receiver_cert_prepare_km, 723 .verify_hprime = mei_hdcp_verify_hprime, 724 .store_pairing_info = mei_hdcp_store_pairing_info, 725 .initiate_locality_check = mei_hdcp_initiate_locality_check, 726 .verify_lprime = mei_hdcp_verify_lprime, 727 .get_session_key = mei_hdcp_get_session_key, 728 .repeater_check_flow_prepare_ack = 729 mei_hdcp_repeater_check_flow_prepare_ack, 730 .verify_mprime = mei_hdcp_verify_mprime, 731 .enable_hdcp_authentication = mei_hdcp_enable_authentication, 732 .close_hdcp_session = mei_hdcp_close_session, 733 }; 734 735 static int mei_component_master_bind(struct device *dev) 736 { 737 struct mei_cl_device *cldev = to_mei_cl_device(dev); 738 struct i915_hdcp_comp_master *comp_master = 739 mei_cldev_get_drvdata(cldev); 740 int ret; 741 742 dev_dbg(dev, "%s\n", __func__); 743 comp_master->ops = &mei_hdcp_ops; 744 comp_master->mei_dev = dev; 745 ret = component_bind_all(dev, comp_master); 746 if (ret < 0) 747 return ret; 748 749 return 0; 750 } 751 752 static void mei_component_master_unbind(struct device *dev) 753 { 754 struct mei_cl_device *cldev = to_mei_cl_device(dev); 755 struct i915_hdcp_comp_master *comp_master = 756 mei_cldev_get_drvdata(cldev); 757 758 dev_dbg(dev, "%s\n", __func__); 759 component_unbind_all(dev, comp_master); 760 } 761 762 static const struct component_master_ops mei_component_master_ops = { 763 .bind = mei_component_master_bind, 764 .unbind = mei_component_master_unbind, 765 }; 766 767 /** 768 * mei_hdcp_component_match - compare function for matching mei hdcp. 769 * 770 * The function checks if the driver is i915, the subcomponent is HDCP 771 * and the grand parent of hdcp and the parent of i915 are the same 772 * PCH device. 773 * 774 * @dev: master device 775 * @subcomponent: subcomponent to match (I915_COMPONENT_HDCP) 776 * @data: compare data (mei hdcp device) 777 * 778 * Return: 779 * * 1 - if components match 780 * * 0 - otherwise 781 */ 782 static int mei_hdcp_component_match(struct device *dev, int subcomponent, 783 void *data) 784 { 785 struct device *base = data; 786 787 if (strcmp(dev->driver->name, "i915") || 788 subcomponent != I915_COMPONENT_HDCP) 789 return 0; 790 791 base = base->parent; 792 if (!base) 793 return 0; 794 795 base = base->parent; 796 dev = dev->parent; 797 798 return (base && dev && dev == base); 799 } 800 801 static int mei_hdcp_probe(struct mei_cl_device *cldev, 802 const struct mei_cl_device_id *id) 803 { 804 struct i915_hdcp_comp_master *comp_master; 805 struct component_match *master_match; 806 int ret; 807 808 ret = mei_cldev_enable(cldev); 809 if (ret < 0) { 810 dev_err(&cldev->dev, "mei_cldev_enable Failed. %d\n", ret); 811 goto enable_err_exit; 812 } 813 814 comp_master = kzalloc(sizeof(*comp_master), GFP_KERNEL); 815 if (!comp_master) { 816 ret = -ENOMEM; 817 goto err_exit; 818 } 819 820 master_match = NULL; 821 component_match_add_typed(&cldev->dev, &master_match, 822 mei_hdcp_component_match, &cldev->dev); 823 if (IS_ERR_OR_NULL(master_match)) { 824 ret = -ENOMEM; 825 goto err_exit; 826 } 827 828 mei_cldev_set_drvdata(cldev, comp_master); 829 ret = component_master_add_with_match(&cldev->dev, 830 &mei_component_master_ops, 831 master_match); 832 if (ret < 0) { 833 dev_err(&cldev->dev, "Master comp add failed %d\n", ret); 834 goto err_exit; 835 } 836 837 return 0; 838 839 err_exit: 840 mei_cldev_set_drvdata(cldev, NULL); 841 kfree(comp_master); 842 mei_cldev_disable(cldev); 843 enable_err_exit: 844 return ret; 845 } 846 847 static int mei_hdcp_remove(struct mei_cl_device *cldev) 848 { 849 struct i915_hdcp_comp_master *comp_master = 850 mei_cldev_get_drvdata(cldev); 851 852 component_master_del(&cldev->dev, &mei_component_master_ops); 853 kfree(comp_master); 854 mei_cldev_set_drvdata(cldev, NULL); 855 856 return mei_cldev_disable(cldev); 857 } 858 859 #define MEI_UUID_HDCP GUID_INIT(0xB638AB7E, 0x94E2, 0x4EA2, 0xA5, \ 860 0x52, 0xD1, 0xC5, 0x4B, 0x62, 0x7F, 0x04) 861 862 static const struct mei_cl_device_id mei_hdcp_tbl[] = { 863 { .uuid = MEI_UUID_HDCP, .version = MEI_CL_VERSION_ANY }, 864 { } 865 }; 866 MODULE_DEVICE_TABLE(mei, mei_hdcp_tbl); 867 868 static struct mei_cl_driver mei_hdcp_driver = { 869 .id_table = mei_hdcp_tbl, 870 .name = KBUILD_MODNAME, 871 .probe = mei_hdcp_probe, 872 .remove = mei_hdcp_remove, 873 }; 874 875 module_mei_cl_driver(mei_hdcp_driver); 876 877 MODULE_AUTHOR("Intel Corporation"); 878 MODULE_LICENSE("GPL"); 879 MODULE_DESCRIPTION("MEI HDCP"); 880