1 /* 2 * drivers/hwmon/lis3lv02d_i2c.c 3 * 4 * Implements I2C interface for lis3lv02d (STMicroelectronics) accelerometer. 5 * Driver is based on corresponding SPI driver written by Daniel Mack 6 * (lis3lv02d_spi.c (C) 2009 Daniel Mack <daniel@caiaq.de> ). 7 * 8 * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). 9 * 10 * Contact: Samu Onkalo <samu.p.onkalo@nokia.com> 11 * 12 * This program is free software; you can redistribute it and/or 13 * modify it under the terms of the GNU General Public License 14 * version 2 as published by the Free Software Foundation. 15 * 16 * This program is distributed in the hope that it will be useful, but 17 * WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 19 * General Public License for more details. 20 * 21 * You should have received a copy of the GNU General Public License 22 * along with this program; if not, write to the Free Software 23 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 24 * 02110-1301 USA 25 */ 26 27 #include <linux/module.h> 28 #include <linux/kernel.h> 29 #include <linux/err.h> 30 #include <linux/i2c.h> 31 #include <linux/pm_runtime.h> 32 #include <linux/delay.h> 33 #include <linux/of.h> 34 #include <linux/of_platform.h> 35 #include <linux/of_device.h> 36 37 #include "lis3lv02d.h" 38 39 #define DRV_NAME "lis3lv02d_i2c" 40 41 static const char reg_vdd[] = "Vdd"; 42 static const char reg_vdd_io[] = "Vdd_IO"; 43 44 static int lis3_reg_ctrl(struct lis3lv02d *lis3, bool state) 45 { 46 int ret; 47 if (state == LIS3_REG_OFF) { 48 ret = regulator_bulk_disable(ARRAY_SIZE(lis3->regulators), 49 lis3->regulators); 50 } else { 51 ret = regulator_bulk_enable(ARRAY_SIZE(lis3->regulators), 52 lis3->regulators); 53 /* Chip needs time to wakeup. Not mentioned in datasheet */ 54 usleep_range(10000, 20000); 55 } 56 return ret; 57 } 58 59 static inline s32 lis3_i2c_write(struct lis3lv02d *lis3, int reg, u8 value) 60 { 61 struct i2c_client *c = lis3->bus_priv; 62 return i2c_smbus_write_byte_data(c, reg, value); 63 } 64 65 static inline s32 lis3_i2c_read(struct lis3lv02d *lis3, int reg, u8 *v) 66 { 67 struct i2c_client *c = lis3->bus_priv; 68 *v = i2c_smbus_read_byte_data(c, reg); 69 return 0; 70 } 71 72 static inline s32 lis3_i2c_blockread(struct lis3lv02d *lis3, int reg, int len, 73 u8 *v) 74 { 75 struct i2c_client *c = lis3->bus_priv; 76 reg |= (1 << 7); /* 7th bit enables address auto incrementation */ 77 return i2c_smbus_read_i2c_block_data(c, reg, len, v); 78 } 79 80 static int lis3_i2c_init(struct lis3lv02d *lis3) 81 { 82 u8 reg; 83 int ret; 84 85 lis3_reg_ctrl(lis3, LIS3_REG_ON); 86 87 lis3->read(lis3, WHO_AM_I, ®); 88 if (reg != lis3->whoami) 89 printk(KERN_ERR "lis3: power on failure\n"); 90 91 /* power up the device */ 92 ret = lis3->read(lis3, CTRL_REG1, ®); 93 if (ret < 0) 94 return ret; 95 96 if (lis3->whoami == WAI_3DLH) 97 reg |= CTRL1_PM0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen; 98 else 99 reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen; 100 101 return lis3->write(lis3, CTRL_REG1, reg); 102 } 103 104 /* Default axis mapping but it can be overwritten by platform data */ 105 static union axis_conversion lis3lv02d_axis_map = 106 { .as_array = { LIS3_DEV_X, LIS3_DEV_Y, LIS3_DEV_Z } }; 107 108 #ifdef CONFIG_OF 109 static const struct of_device_id lis3lv02d_i2c_dt_ids[] = { 110 { .compatible = "st,lis3lv02d" }, 111 {} 112 }; 113 MODULE_DEVICE_TABLE(of, lis3lv02d_i2c_dt_ids); 114 #endif 115 116 static int lis3lv02d_i2c_probe(struct i2c_client *client, 117 const struct i2c_device_id *id) 118 { 119 int ret = 0; 120 struct lis3lv02d_platform_data *pdata = client->dev.platform_data; 121 122 #ifdef CONFIG_OF 123 if (of_match_device(lis3lv02d_i2c_dt_ids, &client->dev)) { 124 lis3_dev.of_node = client->dev.of_node; 125 ret = lis3lv02d_init_dt(&lis3_dev); 126 if (ret) 127 return ret; 128 pdata = lis3_dev.pdata; 129 } 130 #endif 131 132 if (pdata) { 133 if ((pdata->driver_features & LIS3_USE_BLOCK_READ) && 134 (i2c_check_functionality(client->adapter, 135 I2C_FUNC_SMBUS_I2C_BLOCK))) 136 lis3_dev.blkread = lis3_i2c_blockread; 137 138 if (pdata->axis_x) 139 lis3lv02d_axis_map.x = pdata->axis_x; 140 141 if (pdata->axis_y) 142 lis3lv02d_axis_map.y = pdata->axis_y; 143 144 if (pdata->axis_z) 145 lis3lv02d_axis_map.z = pdata->axis_z; 146 147 if (pdata->setup_resources) 148 ret = pdata->setup_resources(); 149 150 if (ret) 151 goto fail; 152 } 153 154 lis3_dev.regulators[0].supply = reg_vdd; 155 lis3_dev.regulators[1].supply = reg_vdd_io; 156 ret = regulator_bulk_get(&client->dev, 157 ARRAY_SIZE(lis3_dev.regulators), 158 lis3_dev.regulators); 159 if (ret < 0) 160 goto fail; 161 162 lis3_dev.pdata = pdata; 163 lis3_dev.bus_priv = client; 164 lis3_dev.init = lis3_i2c_init; 165 lis3_dev.read = lis3_i2c_read; 166 lis3_dev.write = lis3_i2c_write; 167 lis3_dev.irq = client->irq; 168 lis3_dev.ac = lis3lv02d_axis_map; 169 lis3_dev.pm_dev = &client->dev; 170 171 i2c_set_clientdata(client, &lis3_dev); 172 173 /* Provide power over the init call */ 174 lis3_reg_ctrl(&lis3_dev, LIS3_REG_ON); 175 176 ret = lis3lv02d_init_device(&lis3_dev); 177 178 lis3_reg_ctrl(&lis3_dev, LIS3_REG_OFF); 179 180 if (ret) 181 goto fail2; 182 return 0; 183 184 fail2: 185 regulator_bulk_free(ARRAY_SIZE(lis3_dev.regulators), 186 lis3_dev.regulators); 187 fail: 188 if (pdata && pdata->release_resources) 189 pdata->release_resources(); 190 return ret; 191 } 192 193 static int lis3lv02d_i2c_remove(struct i2c_client *client) 194 { 195 struct lis3lv02d *lis3 = i2c_get_clientdata(client); 196 struct lis3lv02d_platform_data *pdata = client->dev.platform_data; 197 198 if (pdata && pdata->release_resources) 199 pdata->release_resources(); 200 201 lis3lv02d_joystick_disable(lis3); 202 lis3lv02d_remove_fs(&lis3_dev); 203 204 regulator_bulk_free(ARRAY_SIZE(lis3->regulators), 205 lis3_dev.regulators); 206 return 0; 207 } 208 209 #ifdef CONFIG_PM_SLEEP 210 static int lis3lv02d_i2c_suspend(struct device *dev) 211 { 212 struct i2c_client *client = container_of(dev, struct i2c_client, dev); 213 struct lis3lv02d *lis3 = i2c_get_clientdata(client); 214 215 if (!lis3->pdata || !lis3->pdata->wakeup_flags) 216 lis3lv02d_poweroff(lis3); 217 return 0; 218 } 219 220 static int lis3lv02d_i2c_resume(struct device *dev) 221 { 222 struct i2c_client *client = container_of(dev, struct i2c_client, dev); 223 struct lis3lv02d *lis3 = i2c_get_clientdata(client); 224 225 /* 226 * pm_runtime documentation says that devices should always 227 * be powered on at resume. Pm_runtime turns them off after system 228 * wide resume is complete. 229 */ 230 if (!lis3->pdata || !lis3->pdata->wakeup_flags || 231 pm_runtime_suspended(dev)) 232 lis3lv02d_poweron(lis3); 233 234 return 0; 235 } 236 #endif /* CONFIG_PM_SLEEP */ 237 238 #ifdef CONFIG_PM 239 static int lis3_i2c_runtime_suspend(struct device *dev) 240 { 241 struct i2c_client *client = container_of(dev, struct i2c_client, dev); 242 struct lis3lv02d *lis3 = i2c_get_clientdata(client); 243 244 lis3lv02d_poweroff(lis3); 245 return 0; 246 } 247 248 static int lis3_i2c_runtime_resume(struct device *dev) 249 { 250 struct i2c_client *client = container_of(dev, struct i2c_client, dev); 251 struct lis3lv02d *lis3 = i2c_get_clientdata(client); 252 253 lis3lv02d_poweron(lis3); 254 return 0; 255 } 256 #endif /* CONFIG_PM */ 257 258 static const struct i2c_device_id lis3lv02d_id[] = { 259 {"lis3lv02d", LIS3LV02D}, 260 {"lis331dlh", LIS331DLH}, 261 {} 262 }; 263 264 MODULE_DEVICE_TABLE(i2c, lis3lv02d_id); 265 266 static const struct dev_pm_ops lis3_pm_ops = { 267 SET_SYSTEM_SLEEP_PM_OPS(lis3lv02d_i2c_suspend, 268 lis3lv02d_i2c_resume) 269 SET_RUNTIME_PM_OPS(lis3_i2c_runtime_suspend, 270 lis3_i2c_runtime_resume, 271 NULL) 272 }; 273 274 static struct i2c_driver lis3lv02d_i2c_driver = { 275 .driver = { 276 .name = DRV_NAME, 277 .owner = THIS_MODULE, 278 .pm = &lis3_pm_ops, 279 .of_match_table = of_match_ptr(lis3lv02d_i2c_dt_ids), 280 }, 281 .probe = lis3lv02d_i2c_probe, 282 .remove = lis3lv02d_i2c_remove, 283 .id_table = lis3lv02d_id, 284 }; 285 286 module_i2c_driver(lis3lv02d_i2c_driver); 287 288 MODULE_AUTHOR("Nokia Corporation"); 289 MODULE_DESCRIPTION("lis3lv02d I2C interface"); 290 MODULE_LICENSE("GPL"); 291