1 /* 2 * Copyright (C) 2012 Stefan Roese <sr@denx.de> 3 * 4 * This program is free software; you can redistribute it and/or modify 5 * it under the terms of the GNU General Public License as published by 6 * the Free Software Foundation; either version 2 of the License, or 7 * (at your option) any later version. 8 */ 9 10 #include <linux/device.h> 11 #include <linux/firmware.h> 12 #include <linux/module.h> 13 #include <linux/errno.h> 14 #include <linux/kernel.h> 15 #include <linux/spi/spi.h> 16 #include <linux/platform_device.h> 17 #include <linux/delay.h> 18 #include <asm/unaligned.h> 19 20 #define FIRMWARE_NAME "lattice-ecp3.bit" 21 22 /* 23 * The JTAG ID's of the supported FPGA's. The ID is 32bit wide 24 * reversed as noted in the manual. 25 */ 26 #define ID_ECP3_17 0xc2088080 27 #define ID_ECP3_35 0xc2048080 28 29 /* FPGA commands */ 30 #define FPGA_CMD_READ_ID 0x07 /* plus 24 bits */ 31 #define FPGA_CMD_READ_STATUS 0x09 /* plus 24 bits */ 32 #define FPGA_CMD_CLEAR 0x70 33 #define FPGA_CMD_REFRESH 0x71 34 #define FPGA_CMD_WRITE_EN 0x4a /* plus 2 bits */ 35 #define FPGA_CMD_WRITE_DIS 0x4f /* plus 8 bits */ 36 #define FPGA_CMD_WRITE_INC 0x41 /* plus 0 bits */ 37 38 /* 39 * The status register is 32bit revered, DONE is bit 17 from the TN1222.pdf 40 * (LatticeECP3 Slave SPI Port User's Guide) 41 */ 42 #define FPGA_STATUS_DONE 0x00004000 43 #define FPGA_STATUS_CLEARED 0x00010000 44 45 #define FPGA_CLEAR_TIMEOUT 5000 /* max. 5000ms for FPGA clear */ 46 #define FPGA_CLEAR_MSLEEP 10 47 #define FPGA_CLEAR_LOOP_COUNT (FPGA_CLEAR_TIMEOUT / FPGA_CLEAR_MSLEEP) 48 49 struct fpga_data { 50 struct completion fw_loaded; 51 }; 52 53 struct ecp3_dev { 54 u32 jedec_id; 55 char *name; 56 }; 57 58 static const struct ecp3_dev ecp3_dev[] = { 59 { 60 .jedec_id = ID_ECP3_17, 61 .name = "Lattice ECP3-17", 62 }, 63 { 64 .jedec_id = ID_ECP3_35, 65 .name = "Lattice ECP3-35", 66 }, 67 }; 68 69 static void firmware_load(const struct firmware *fw, void *context) 70 { 71 struct spi_device *spi = (struct spi_device *)context; 72 struct fpga_data *data = spi_get_drvdata(spi); 73 u8 *buffer; 74 int ret; 75 u8 txbuf[8]; 76 u8 rxbuf[8]; 77 int rx_len = 8; 78 int i; 79 u32 jedec_id; 80 u32 status; 81 82 if (fw->size == 0) { 83 dev_err(&spi->dev, "Error: Firmware size is 0!\n"); 84 return; 85 } 86 87 /* Fill dummy data (24 stuffing bits for commands) */ 88 txbuf[1] = 0x00; 89 txbuf[2] = 0x00; 90 txbuf[3] = 0x00; 91 92 /* Trying to speak with the FPGA via SPI... */ 93 txbuf[0] = FPGA_CMD_READ_ID; 94 ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len); 95 jedec_id = get_unaligned_be32(&rxbuf[4]); 96 dev_dbg(&spi->dev, "FPGA JTAG ID=%08x\n", jedec_id); 97 98 for (i = 0; i < ARRAY_SIZE(ecp3_dev); i++) { 99 if (jedec_id == ecp3_dev[i].jedec_id) 100 break; 101 } 102 if (i == ARRAY_SIZE(ecp3_dev)) { 103 dev_err(&spi->dev, 104 "Error: No supported FPGA detected (JEDEC_ID=%08x)!\n", 105 jedec_id); 106 return; 107 } 108 109 dev_info(&spi->dev, "FPGA %s detected\n", ecp3_dev[i].name); 110 111 txbuf[0] = FPGA_CMD_READ_STATUS; 112 ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len); 113 status = get_unaligned_be32(&rxbuf[4]); 114 dev_dbg(&spi->dev, "FPGA Status=%08x\n", status); 115 116 buffer = kzalloc(fw->size + 8, GFP_KERNEL); 117 if (!buffer) { 118 dev_err(&spi->dev, "Error: Can't allocate memory!\n"); 119 return; 120 } 121 122 /* 123 * Insert WRITE_INC command into stream (one SPI frame) 124 */ 125 buffer[0] = FPGA_CMD_WRITE_INC; 126 buffer[1] = 0xff; 127 buffer[2] = 0xff; 128 buffer[3] = 0xff; 129 memcpy(buffer + 4, fw->data, fw->size); 130 131 txbuf[0] = FPGA_CMD_REFRESH; 132 ret = spi_write(spi, txbuf, 4); 133 134 txbuf[0] = FPGA_CMD_WRITE_EN; 135 ret = spi_write(spi, txbuf, 4); 136 137 txbuf[0] = FPGA_CMD_CLEAR; 138 ret = spi_write(spi, txbuf, 4); 139 140 /* 141 * Wait for FPGA memory to become cleared 142 */ 143 for (i = 0; i < FPGA_CLEAR_LOOP_COUNT; i++) { 144 txbuf[0] = FPGA_CMD_READ_STATUS; 145 ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len); 146 status = get_unaligned_be32(&rxbuf[4]); 147 if (status == FPGA_STATUS_CLEARED) 148 break; 149 150 msleep(FPGA_CLEAR_MSLEEP); 151 } 152 153 if (i == FPGA_CLEAR_LOOP_COUNT) { 154 dev_err(&spi->dev, 155 "Error: Timeout waiting for FPGA to clear (status=%08x)!\n", 156 status); 157 kfree(buffer); 158 return; 159 } 160 161 dev_info(&spi->dev, "Configuring the FPGA...\n"); 162 ret = spi_write(spi, buffer, fw->size + 8); 163 164 txbuf[0] = FPGA_CMD_WRITE_DIS; 165 ret = spi_write(spi, txbuf, 4); 166 167 txbuf[0] = FPGA_CMD_READ_STATUS; 168 ret = spi_write_then_read(spi, txbuf, 8, rxbuf, rx_len); 169 status = get_unaligned_be32(&rxbuf[4]); 170 dev_dbg(&spi->dev, "FPGA Status=%08x\n", status); 171 172 /* Check result */ 173 if (status & FPGA_STATUS_DONE) 174 dev_info(&spi->dev, "FPGA successfully configured!\n"); 175 else 176 dev_info(&spi->dev, "FPGA not configured (DONE not set)\n"); 177 178 /* 179 * Don't forget to release the firmware again 180 */ 181 release_firmware(fw); 182 183 kfree(buffer); 184 185 complete(&data->fw_loaded); 186 } 187 188 static int lattice_ecp3_probe(struct spi_device *spi) 189 { 190 struct fpga_data *data; 191 int err; 192 193 data = devm_kzalloc(&spi->dev, sizeof(*data), GFP_KERNEL); 194 if (!data) { 195 dev_err(&spi->dev, "Memory allocation for fpga_data failed\n"); 196 return -ENOMEM; 197 } 198 spi_set_drvdata(spi, data); 199 200 init_completion(&data->fw_loaded); 201 err = request_firmware_nowait(THIS_MODULE, FW_ACTION_HOTPLUG, 202 FIRMWARE_NAME, &spi->dev, 203 GFP_KERNEL, spi, firmware_load); 204 if (err) { 205 dev_err(&spi->dev, "Firmware loading failed with %d!\n", err); 206 return err; 207 } 208 209 dev_info(&spi->dev, "FPGA bitstream configuration driver registered\n"); 210 211 return 0; 212 } 213 214 static int lattice_ecp3_remove(struct spi_device *spi) 215 { 216 struct fpga_data *data = spi_get_drvdata(spi); 217 218 wait_for_completion(&data->fw_loaded); 219 220 return 0; 221 } 222 223 static const struct spi_device_id lattice_ecp3_id[] = { 224 { "ecp3-17", 0 }, 225 { "ecp3-35", 0 }, 226 { } 227 }; 228 MODULE_DEVICE_TABLE(spi, lattice_ecp3_id); 229 230 static struct spi_driver lattice_ecp3_driver = { 231 .driver = { 232 .name = "lattice-ecp3", 233 .owner = THIS_MODULE, 234 }, 235 .probe = lattice_ecp3_probe, 236 .remove = lattice_ecp3_remove, 237 .id_table = lattice_ecp3_id, 238 }; 239 240 module_spi_driver(lattice_ecp3_driver); 241 242 MODULE_AUTHOR("Stefan Roese <sr@denx.de>"); 243 MODULE_DESCRIPTION("Lattice ECP3 FPGA configuration via SPI"); 244 MODULE_LICENSE("GPL"); 245