1 /* SPDX-License-Identifier: GPL-2.0 */ 2 /* 3 * linux/drivers/char/hpilo.h 4 * 5 * Copyright (C) 2008 Hewlett-Packard Development Company, L.P. 6 * David Altobelli <david.altobelli@hp.com> 7 */ 8 #ifndef __HPILO_H 9 #define __HPILO_H 10 11 #define ILO_NAME "hpilo" 12 13 /* max number of open channel control blocks per device, hw limited to 32 */ 14 #define MAX_CCB 24 15 /* min number of open channel control blocks per device, hw limited to 32 */ 16 #define MIN_CCB 8 17 /* max number of supported devices */ 18 #define MAX_ILO_DEV 1 19 /* max number of files */ 20 #define MAX_OPEN (MAX_CCB * MAX_ILO_DEV) 21 /* total wait time in usec */ 22 #define MAX_WAIT_TIME 10000 23 /* per spin wait time in usec */ 24 #define WAIT_TIME 10 25 /* spin counter for open/close delay */ 26 #define MAX_WAIT (MAX_WAIT_TIME / WAIT_TIME) 27 28 /* 29 * Per device, used to track global memory allocations. 30 */ 31 struct ilo_hwinfo { 32 /* mmio registers on device */ 33 char __iomem *mmio_vaddr; 34 35 /* doorbell registers on device */ 36 char __iomem *db_vaddr; 37 38 /* shared memory on device used for channel control blocks */ 39 char __iomem *ram_vaddr; 40 41 /* files corresponding to this device */ 42 struct ccb_data *ccb_alloc[MAX_CCB]; 43 44 struct pci_dev *ilo_dev; 45 46 /* 47 * open_lock serializes ccb_cnt during open and close 48 * [ irq disabled ] 49 * -> alloc_lock used when adding/removing/searching ccb_alloc, 50 * which represents all ccbs open on the device 51 * --> fifo_lock controls access to fifo queues shared with hw 52 * 53 * Locks must be taken in this order, but open_lock and alloc_lock 54 * are optional, they do not need to be held in order to take a 55 * lower level lock. 56 */ 57 spinlock_t open_lock; 58 spinlock_t alloc_lock; 59 spinlock_t fifo_lock; 60 61 struct cdev cdev; 62 }; 63 64 /* offset from mmio_vaddr for enabling doorbell interrupts */ 65 #define DB_IRQ 0xB2 66 /* offset from mmio_vaddr for outbound communications */ 67 #define DB_OUT 0xD4 68 /* DB_OUT reset bit */ 69 #define DB_RESET 26 70 71 /* 72 * Channel control block. Used to manage hardware queues. 73 * The format must match hw's version. The hw ccb is 128 bytes, 74 * but the context area shouldn't be touched by the driver. 75 */ 76 #define ILOSW_CCB_SZ 64 77 #define ILOHW_CCB_SZ 128 78 struct ccb { 79 union { 80 char *send_fifobar; 81 u64 send_fifobar_pa; 82 } ccb_u1; 83 union { 84 char *send_desc; 85 u64 send_desc_pa; 86 } ccb_u2; 87 u64 send_ctrl; 88 89 union { 90 char *recv_fifobar; 91 u64 recv_fifobar_pa; 92 } ccb_u3; 93 union { 94 char *recv_desc; 95 u64 recv_desc_pa; 96 } ccb_u4; 97 u64 recv_ctrl; 98 99 union { 100 char __iomem *db_base; 101 u64 padding5; 102 } ccb_u5; 103 104 u64 channel; 105 106 /* unused context area (64 bytes) */ 107 }; 108 109 /* ccb queue parameters */ 110 #define SENDQ 1 111 #define RECVQ 2 112 #define NR_QENTRY 4 113 #define L2_QENTRY_SZ 12 114 115 /* ccb ctrl bitfields */ 116 #define CTRL_BITPOS_L2SZ 0 117 #define CTRL_BITPOS_FIFOINDEXMASK 4 118 #define CTRL_BITPOS_DESCLIMIT 18 119 #define CTRL_BITPOS_A 30 120 #define CTRL_BITPOS_G 31 121 122 /* ccb doorbell macros */ 123 #define L2_DB_SIZE 14 124 #define ONE_DB_SIZE (1 << L2_DB_SIZE) 125 126 /* 127 * Per fd structure used to track the ccb allocated to that dev file. 128 */ 129 struct ccb_data { 130 /* software version of ccb, using virtual addrs */ 131 struct ccb driver_ccb; 132 133 /* hardware version of ccb, using physical addrs */ 134 struct ccb ilo_ccb; 135 136 /* hardware ccb is written to this shared mapped device memory */ 137 struct ccb __iomem *mapped_ccb; 138 139 /* dma'able memory used for send/recv queues */ 140 void *dma_va; 141 dma_addr_t dma_pa; 142 size_t dma_size; 143 144 /* pointer to hardware device info */ 145 struct ilo_hwinfo *ilo_hw; 146 147 /* queue for this ccb to wait for recv data */ 148 wait_queue_head_t ccb_waitq; 149 150 /* usage count, to allow for shared ccb's */ 151 int ccb_cnt; 152 153 /* open wanted exclusive access to this ccb */ 154 int ccb_excl; 155 }; 156 157 /* 158 * FIFO queue structure, shared with hw. 159 */ 160 #define ILO_START_ALIGN 4096 161 #define ILO_CACHE_SZ 128 162 struct fifo { 163 u64 nrents; /* user requested number of fifo entries */ 164 u64 imask; /* mask to extract valid fifo index */ 165 u64 merge; /* O/C bits to merge in during enqueue operation */ 166 u64 reset; /* set to non-zero when the target device resets */ 167 u8 pad_0[ILO_CACHE_SZ - (sizeof(u64) * 4)]; 168 169 u64 head; 170 u8 pad_1[ILO_CACHE_SZ - (sizeof(u64))]; 171 172 u64 tail; 173 u8 pad_2[ILO_CACHE_SZ - (sizeof(u64))]; 174 175 u64 fifobar[]; 176 }; 177 178 /* convert between struct fifo, and the fifobar, which is saved in the ccb */ 179 #define FIFOHANDLESIZE (sizeof(struct fifo)) 180 #define FIFOBARTOHANDLE(_fifo) \ 181 ((struct fifo *)(((char *)(_fifo)) - FIFOHANDLESIZE)) 182 183 /* the number of qwords to consume from the entry descriptor */ 184 #define ENTRY_BITPOS_QWORDS 0 185 /* descriptor index number (within a specified queue) */ 186 #define ENTRY_BITPOS_DESCRIPTOR 10 187 /* state bit, fifo entry consumed by consumer */ 188 #define ENTRY_BITPOS_C 22 189 /* state bit, fifo entry is occupied */ 190 #define ENTRY_BITPOS_O 23 191 192 #define ENTRY_BITS_QWORDS 10 193 #define ENTRY_BITS_DESCRIPTOR 12 194 #define ENTRY_BITS_C 1 195 #define ENTRY_BITS_O 1 196 #define ENTRY_BITS_TOTAL \ 197 (ENTRY_BITS_C + ENTRY_BITS_O + \ 198 ENTRY_BITS_QWORDS + ENTRY_BITS_DESCRIPTOR) 199 200 /* extract various entry fields */ 201 #define ENTRY_MASK ((1 << ENTRY_BITS_TOTAL) - 1) 202 #define ENTRY_MASK_C (((1 << ENTRY_BITS_C) - 1) << ENTRY_BITPOS_C) 203 #define ENTRY_MASK_O (((1 << ENTRY_BITS_O) - 1) << ENTRY_BITPOS_O) 204 #define ENTRY_MASK_QWORDS \ 205 (((1 << ENTRY_BITS_QWORDS) - 1) << ENTRY_BITPOS_QWORDS) 206 #define ENTRY_MASK_DESCRIPTOR \ 207 (((1 << ENTRY_BITS_DESCRIPTOR) - 1) << ENTRY_BITPOS_DESCRIPTOR) 208 209 #define ENTRY_MASK_NOSTATE (ENTRY_MASK >> (ENTRY_BITS_C + ENTRY_BITS_O)) 210 211 #endif /* __HPILO_H */ 212