1 #ifndef __CARD_DDCB_H__ 2 #define __CARD_DDCB_H__ 3 4 /** 5 * IBM Accelerator Family 'GenWQE' 6 * 7 * (C) Copyright IBM Corp. 2013 8 * 9 * Author: Frank Haverkamp <haver@linux.vnet.ibm.com> 10 * Author: Joerg-Stephan Vogt <jsvogt@de.ibm.com> 11 * Author: Michael Jung <mijung@de.ibm.com> 12 * Author: Michael Ruettger <michael@ibmra.de> 13 * 14 * This program is free software; you can redistribute it and/or modify 15 * it under the terms of the GNU General Public License as published by 16 * the Free Software Foundation; either version 2, or (at your option) 17 * any later version. 18 * 19 * This program is distributed in the hope that it will be useful, 20 * but WITHOUT ANY WARRANTY; without even the implied warranty of 21 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 22 * GNU General Public License for more details. 23 */ 24 25 #include <linux/types.h> 26 #include <asm/byteorder.h> 27 28 #include "genwqe_driver.h" 29 #include "card_base.h" 30 31 /** 32 * struct ddcb - Device Driver Control Block DDCB 33 * @hsi: Hardware software interlock 34 * @shi: Software hardware interlock. Hsi and shi are used to interlock 35 * software and hardware activities. We are using a compare and 36 * swap operation to ensure that there are no races when 37 * activating new DDCBs on the queue, or when we need to 38 * purge a DDCB from a running queue. 39 * @acfunc: Accelerator function addresses a unit within the chip 40 * @cmd: Command to work on 41 * @cmdopts_16: Options for the command 42 * @asiv: Input data 43 * @asv: Output data 44 * 45 * The DDCB data format is big endian. Multiple consequtive DDBCs form 46 * a DDCB queue. 47 */ 48 #define ASIV_LENGTH 104 /* Old specification without ATS field */ 49 #define ASIV_LENGTH_ATS 96 /* New specification with ATS field */ 50 #define ASV_LENGTH 64 51 52 struct ddcb { 53 union { 54 __be32 icrc_hsi_shi_32; /* iCRC, Hardware/SW interlock */ 55 struct { 56 __be16 icrc_16; 57 u8 hsi; 58 u8 shi; 59 }; 60 }; 61 u8 pre; /* Preamble */ 62 u8 xdir; /* Execution Directives */ 63 __be16 seqnum_16; /* Sequence Number */ 64 65 u8 acfunc; /* Accelerator Function.. */ 66 u8 cmd; /* Command. */ 67 __be16 cmdopts_16; /* Command Options */ 68 u8 sur; /* Status Update Rate */ 69 u8 psp; /* Protection Section Pointer */ 70 __be16 rsvd_0e_16; /* Reserved invariant */ 71 72 __be64 fwiv_64; /* Firmware Invariant. */ 73 74 union { 75 struct { 76 __be64 ats_64; /* Address Translation Spec */ 77 u8 asiv[ASIV_LENGTH_ATS]; /* New ASIV */ 78 } n; 79 u8 __asiv[ASIV_LENGTH]; /* obsolete */ 80 }; 81 u8 asv[ASV_LENGTH]; /* Appl Spec Variant */ 82 83 __be16 rsvd_c0_16; /* Reserved Variant */ 84 __be16 vcrc_16; /* Variant CRC */ 85 __be32 rsvd_32; /* Reserved unprotected */ 86 87 __be64 deque_ts_64; /* Deque Time Stamp. */ 88 89 __be16 retc_16; /* Return Code */ 90 __be16 attn_16; /* Attention/Extended Error Codes */ 91 __be32 progress_32; /* Progress indicator. */ 92 93 __be64 cmplt_ts_64; /* Completion Time Stamp. */ 94 95 /* The following layout matches the new service layer format */ 96 __be32 ibdc_32; /* Inbound Data Count (* 256) */ 97 __be32 obdc_32; /* Outbound Data Count (* 256) */ 98 99 __be64 rsvd_SLH_64; /* Reserved for hardware */ 100 union { /* private data for driver */ 101 u8 priv[8]; 102 __be64 priv_64; 103 }; 104 __be64 disp_ts_64; /* Dispatch TimeStamp */ 105 } __attribute__((__packed__)); 106 107 /* CRC polynomials for DDCB */ 108 #define CRC16_POLYNOMIAL 0x1021 109 110 /* 111 * SHI: Software to Hardware Interlock 112 * This 1 byte field is written by software to interlock the 113 * movement of one queue entry to another with the hardware in the 114 * chip. 115 */ 116 #define DDCB_SHI_INTR 0x04 /* Bit 2 */ 117 #define DDCB_SHI_PURGE 0x02 /* Bit 1 */ 118 #define DDCB_SHI_NEXT 0x01 /* Bit 0 */ 119 120 /* 121 * HSI: Hardware to Software interlock 122 * This 1 byte field is written by hardware to interlock the movement 123 * of one queue entry to another with the software in the chip. 124 */ 125 #define DDCB_HSI_COMPLETED 0x40 /* Bit 6 */ 126 #define DDCB_HSI_FETCHED 0x04 /* Bit 2 */ 127 128 /* 129 * Accessing HSI/SHI is done 32-bit wide 130 * Normally 16-bit access would work too, but on some platforms the 131 * 16 compare and swap operation is not supported. Therefore 132 * switching to 32-bit such that those platforms will work too. 133 * 134 * iCRC HSI/SHI 135 */ 136 #define DDCB_INTR_BE32 cpu_to_be32(0x00000004) 137 #define DDCB_PURGE_BE32 cpu_to_be32(0x00000002) 138 #define DDCB_NEXT_BE32 cpu_to_be32(0x00000001) 139 #define DDCB_COMPLETED_BE32 cpu_to_be32(0x00004000) 140 #define DDCB_FETCHED_BE32 cpu_to_be32(0x00000400) 141 142 /* Definitions of DDCB presets */ 143 #define DDCB_PRESET_PRE 0x80 144 #define ICRC_LENGTH(n) ((n) + 8 + 8 + 8) /* used ASIV + hdr fields */ 145 #define VCRC_LENGTH(n) ((n)) /* used ASV */ 146 147 /* 148 * Genwqe Scatter Gather list 149 * Each element has up to 8 entries. 150 * The chaining element is element 0 cause of prefetching needs. 151 */ 152 153 /* 154 * 0b0110 Chained descriptor. The descriptor is describing the next 155 * descriptor list. 156 */ 157 #define SG_CHAINED (0x6) 158 159 /* 160 * 0b0010 First entry of a descriptor list. Start from a Buffer-Empty 161 * condition. 162 */ 163 #define SG_DATA (0x2) 164 165 /* 166 * 0b0000 Early terminator. This is the last entry on the list 167 * irregardless of the length indicated. 168 */ 169 #define SG_END_LIST (0x0) 170 171 /** 172 * struct sglist - Scatter gather list 173 * @target_addr: Either a dma addr of memory to work on or a 174 * dma addr or a subsequent sglist block. 175 * @len: Length of the data block. 176 * @flags: See above. 177 * 178 * Depending on the command the GenWQE card can use a scatter gather 179 * list to describe the memory it works on. Always 8 sg_entry's form 180 * a block. 181 */ 182 struct sg_entry { 183 __be64 target_addr; 184 __be32 len; 185 __be32 flags; 186 }; 187 188 #endif /* __CARD_DDCB_H__ */ 189